Add a proper check for I/O memory resource allocation failure and replace dev_request_mem_region with dev_request_mem_resource so it would be possible to correctly deallocate device's I/O resources when probe fails. Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx> --- drivers/net/fec_imx.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c index f413acd..c059882 100644 --- a/drivers/net/fec_imx.c +++ b/drivers/net/fec_imx.c @@ -686,6 +686,7 @@ static int fec_probe(struct device_d *dev) enum fec_type type; int phy_reset; u32 msec = 1; + struct resource *res; ret = dev_get_drvdata(dev, (const void **)&type); if (ret) @@ -714,7 +715,12 @@ static int fec_probe(struct device_d *dev) if (ret < 0) goto put_clk; - fec->regs = dev_request_mem_region(dev, 0); + res = dev_request_mem_resource(dev, 0); + if (IS_ERR(res)) { + ret = PTR_ERR(res); + goto disable_clk; + } + fec->regs = IOMEM(res->start); phy_reset = of_get_named_gpio(dev->device_node, "phy-reset-gpios", 0); if (gpio_is_valid(phy_reset)) { @@ -722,11 +728,11 @@ static int fec_probe(struct device_d *dev) ret = gpio_request(phy_reset, "phy-reset"); if (ret) - goto disable_clk; + goto release_res; ret = gpio_direction_output(phy_reset, 0); if (ret) - goto disable_clk; + goto release_res; mdelay(msec); gpio_set_value(phy_reset, 1); @@ -766,7 +772,7 @@ static int fec_probe(struct device_d *dev) } if (ret) - goto disable_clk; + goto release_res; fec_init(edev); @@ -786,6 +792,8 @@ static int fec_probe(struct device_d *dev) return 0; +release_res: + release_region(res); disable_clk: clk_disable(fec->clk); put_clk: -- 2.5.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox