U-Boot V2 Development (Barebox)
[Prev Page][Next Page]
- [PATCH 0/3] arm/imx: serial number / UID support
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 3/3] mx25 3ds: set CPU UID
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 1/3] arm: add support for the serial ATAG
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 2/3] imx25: add support for UID read from eFuse
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: Porting to Marvell 88F5182?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Porting to Marvell 88F5182?
- From: Rogan Dawes <rogan@xxxxxxxxxxxx>
- Re: Porting to Marvell 88F5182?
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: Porting to Marvell 88F5182?
- From: Rogan Dawes <rogan@xxxxxxxxxxxx>
- Re: Porting to Marvell 88F5182?
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: Porting to Marvell 88F5182?
- From: Rogan Dawes <rogan@xxxxxxxxxxxx>
- Re: Porting to Marvell 88F5182?
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: Porting to Marvell 88F5182?
- From: Rogan Dawes <rogan@xxxxxxxxxxxx>
- Re: Porting to Marvell 88F5182?
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: Porting to Marvell 88F5182?
- From: Rogan Dawes <rogan@xxxxxxxxxxxx>
- Porting to Marvell 88F5182?
- From: Rogan Dawes <rogan@xxxxxxxxxxxx>
- [PATCH] usb/gadget/fsl_udc.c: fix data corruption
- From: Eric Bénard <eric@xxxxxxxxxx>
- Fix register offsets and width for the WDT on i.MX27
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] cfi_flash_intel: support 1024b buffer write
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] drivers/usb: regorganisation
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] eukrea_cpuimx25: update default config
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] eukrea_cpuimx35: fix board support
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCHv2] fs: add basic sanity check before accessing the files array
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCHv2] fs: add basic sanity check before accessing the files array
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH] fs: add basic sanity check before accessing the files array
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH] fs: add basic sanity check before accessing the files array
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] fs: add basic sanity check before accessing the files array
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH] Adding usb otg mode to pcm038 bootargs
- From: Teresa Gamez <T.Gamez@xxxxxxxxx>
- Re: [PATCH] move boards to arch/<architecure>/boards
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] move boards to arch/<architecure>/boards
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/1] barebox_default_env: fix out of tree build
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] bootz: give a proper error on open() failure
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] bootz: give a proper error on open() failure
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH] move boards to arch/<architecure>/boards
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/1] barebox_default_env: fix out of tree build
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: Amba PL011 driver support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Amba PL011 driver support
- From: Gaurav Singh <gausinghnsit@xxxxxxxxx>
- Re: UBI support
- From: Esben Haabendal <eha@xxxxxxxxxxxxxxxxxxxxxx>
- Re: UBI support
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: UBI support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] nand_imx: fix "used uninitialized" warning on mx25
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: UBI support
- From: Baruch Siach <baruch@xxxxxxxxxx>
- OMAP3530 linux crash during boot.... again from right account.
- From: Jürgen Kilb <J.Kilb@xxxxxxxxx>
- OMAP3530 linux crash during boot....
- From: PHYTEC Mailinglists <mailinglists@xxxxxxxxx>
- Re: [PATCH 02/12] move drivers/nand to drivers/mtd/nand
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 02/12] move drivers/nand to drivers/mtd/nand
- From: Alessandro Rubini <rubini-list@xxxxxxxxx>
- [PATCH V2 4/4] add general check_and_erase callback to environment handling
- From: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
- [PATCH V2 3/4] Add multi env support to saveenv and loadenv commands.
- From: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
- [PATCH V2 2/4] add multi environment support
- From: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
- [PATCH V2 1/4] crc value handling and dry run mode in envfs_load
- From: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
- reworked multiple environment support
- From: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
- [PATCH 10/12] add ubi support from u-boot. Just enough to compile and scan
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/12] move drivers/nand to drivers/mtd/nand
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Regression: not booting anymore on OMAP35xx
- From: "Luca Ceresoli" <list@xxxxxxxxxxxxxxxx>
- [PATCH 11/12] barebox ubi changes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/12] add partition mtd support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- UBI support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/12] cfi_flash: Do not typedef struct flash_info
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/12] add rbtree support (needed for ubi)
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/12] include stuff missing for ubi
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/12] crc32: activate crc32_no_comp (needed for jffs2 and UBI)
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/12] devfs: only check for ioctl function when needed
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 12/12] Add UBI commands: ubiattach, ubidetach, ubimkvol, ubirmvol
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/12] cfi_flash: Add mtd partition support for UBI
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/12] cfi_flash: Do not print debug info while erasing
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/3] beagle: Whitespace cleanup
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/3] omap nand: cleanup
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/3] omap: remove unused defines and corresponding kconfig options
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- omap3 patches
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Add Garz+Fricke Neso support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/2] Add Garz+Fricke Neso support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Garz+Fricke Neso Support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] Add Garz+Fricke Neso defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] trivial: fix typos concerning "hierarchy"
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] Fix typo in commands/gpio.c
- From: Randolph Chung <rchung42@xxxxxxxxx>
- [PATCH] nand_imx: fix "used uninitialized" warning on mx25
- From: Baruch Siach <baruch@xxxxxxxxxx>
- barebox-2010.07.0
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Novice questions
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Novice questions
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Novice questions
- From: Jose Luis Zabalza <jlz.3008@xxxxxxxxx>
- Testing dfu support, build error (beagle)
- From: Henrik Leon <henrik@xxxxxxxxx>
- [PATCH 1/2] trivial: fix typos concerning "hierarchy"
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 2/2] trivial: fix typos concerning "instead"
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] setlocalversion: detect unannotated tags
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Barebox 'git describe' strangeness
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: Barebox 'git describe' strangeness
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] setlocalversion: detect unannotated tags
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: Barebox 'git describe' strangeness
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Barebox 'git describe' strangeness
- From: Eric Bénard <eric@xxxxxxxxxx>
- Barebox 'git describe' strangeness
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: testing barebox on calao sbc35-a9260 board
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: Pending patches for 2010.07
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: Pending patches for 2010.07
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: Pending patches for 2010.07
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: testing barebox on calao sbc35-a9260 board
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: testing barebox on calao sbc35-a9260 board
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: testing barebox on calao sbc35-a9260 board
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Pending patches for 2010.07
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] eukrea_cpuimx35: better usage of LCD enable pins
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] omap/devices-gpmc-nand.c remove repeating words
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- Re: testing barebox on calao sbc35-a9260 board
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: testing barebox on calao sbc35-a9260 board
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: testing barebox on calao sbc35-a9260 board
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: testing barebox on calao sbc35-a9260 board
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [PATCH 04/11] memcpy cmd: Do not expect to read/write the whole chunk at once
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: testing barebox on calao sbc35-a9260 board
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH net-pu] tftp: fix get
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: testing barebox on calao sbc35-a9260 board
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH net-pu] tftp: fix get
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] nor: don't use sector for ERASE_START
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH] byteorder: add missing {BIG,LITTLE}_ENDIAN defines
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH net-pu] tftp: fix push for servers supporting 'option acknowledgement'
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH net-pu] tftp: fix get
- From: Baruch Siach <baruch@xxxxxxxxxx>
- testing barebox on calao sbc35-a9260 board
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [PATCH 04/11] memcpy cmd: Do not expect to read/write the whole chunk at once
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH 13/13] add netconsole support
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH net-pu] tftp: fix get
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Regression: not booting anymore on OMAP35xx
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 13/13] add netconsole support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 13/13] add netconsole support
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH 13/13] add netconsole support
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: assorted patches
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] eukrea_cpuimx35: boot update
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] eukrea_cpuimx35: better usage of LCD enable pins
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 1/2] imx-ipu-fb: Add board specific hook to enable display
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 2/2] imx-ipu-fb: do not enable framebuffer on startup
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH net-pu] tftp: fix get
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 3/3] eukrea_cpuimx35: better handling of backlight
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH] envfs: fix build warning
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] envfs: fix build warning
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH] envfs: fix build warning
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 3/3] eukrea_cpuimx35: better handling of backlight
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] fix command loadb
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] unbreak imx-ipu-fb
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] fix command loadb
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 3/3] eukrea_cpuimx35: better handling of backlight
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 2/3] unbreak imx-ipu-fb
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 1/3] fix command loadb
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 1/6] ehci: Make has_tt configurable via platform data
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 5/6] ehci: Force a ehci_halt before trying to reset
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 4/6] ehci: use is_timeout for timeout instead of udelay counter
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- USB related patches
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/6] usb: Check return value of host controller init
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 6/6] ehci: remove unused code
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/6] ehci: Handle hub port reset properly
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/11] i.MX serial: Use readl/writel instead of pointer deref
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/11] armlinux: reorder tag setup
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/11] imxfb: Add board specific hook to enable display
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/11] i.MX27: merge iomux pim definitions from kernel
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/11] remove eco920 board support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 11/11] fb: add a usage counter to prevent double enable/disable
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/11] i.MX clocksource: Use readl/writel instead of pointer deref
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/11] memcpy cmd: Do not expect to read/write the whole chunk at once
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- assorted patches
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 10/11] i.MX27: Add some missing device base addresses
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/11] imxfb: do not enable framebuffer on startup
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/11] usbnet: remove unused dev member in struct usbnet
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 5/8] tftp: Add push support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 6/8] nfs: Use generic progression bar
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 7/8] nfs: resend requests after timeout
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 4/8] tftp: use generic progression bar
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 8/8] tftp: update doxygen information
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/8] tftp: remove unused variables
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/8] add progression bar function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- more network patches
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/8] cfi flash driver: Use generic progression bar function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] envfs: fix build warning
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: USB device not found
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- USB device not found
- From: Jose Luis Zabalza <jlz.3008@xxxxxxxxx>
- Re: Regression: not booting anymore on OMAP35xx
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Regression: not booting anymore on OMAP35xx
- From: "Luca Ceresoli" <luca@xxxxxxxxxxxxxxxx>
- [PATCH] eukrea_cpuimx25: fix env partition size
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: Regression: not booting anymore on OMAP35xx
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Regression: not booting anymore on OMAP35xx
- From: "Luca Ceresoli" <luca@xxxxxxxxxxxxxxxx>
- Re: Fat32 support
- From: Erwin Rol <mailinglists@xxxxxxxxxxxx>
- Re: Fat32 support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Fat32 support
- From: Jose Luis Zabalza <jlz.3008@xxxxxxxxx>
- Re: Fat32 support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Fat32 support
- From: Jose Luis Zabalza <jlz.3008@xxxxxxxxx>
- Fat32 support
- From: Jose Luis Zabalza <jlz.3008@xxxxxxxxx>
- Re: [PATCH 07/11] add a generic default environment
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] mx2 GPIO OCRx register
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] mx2 GPIO OCRx register
- From: Teresa Gamez <T.Gamez@xxxxxxxxx>
- Re: [PATCH 04/11] include support for a simple pseudo number generator
- From: "'Sascha Hauer'" <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 04/11] include support for a simple pseudo number generator
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- RE: [PATCH 04/11] include support for a simple pseudo number generator
- From: "Andy Pont" <andy.pont@xxxxxxxxxxxxxx>
- Re: [PATCH 07/11] add a generic default environment
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 04/11] include support for a simple pseudo number generator
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: bareboxenv for target
- From: Eric Bénard <eric@xxxxxxxxxx>
- bareboxenv for target
- From: Erwin Rol <mailinglists@xxxxxxxxxxxx>
- Re: [PATCH] i2c: fix adapter_list manipulation
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] drivers/nor: allow overriding of AMD_ADDR_* in board-configs
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] drivers/nor: allow overriding of AMD_ADDR_* in board-configs
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- Re: [PATCH 04/11] include support for a simple pseudo number generator
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 07/11] add a generic default environment
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 04/11] include support for a simple pseudo number generator
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH 07/11] add a generic default environment
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] i2c: fix adapter_list manipulation
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 6/8] mx25 3ds: add support for i2c master and PMIC
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 6/8] mx25 3ds: add support for i2c master and PMIC
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- Re: barebox for i.MX51
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 07/11] add a generic default environment
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 10/11] pcm037: use generic default env
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 11/11] pca100: use generic default env
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/11] pcm043: use generic default env
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/11] pcm038: use generic default env
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/11] pcm037: Add MMU support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/11] net: use a random mac address if the current device does not have one
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/11] Allow to merge default environment from more than one directory
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- More patches
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/11] bootu: Allow passing in devices as parameter
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/11] include support for a simple pseudo number generator
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/11] net: implement random_ether_addr
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/3] dhcp: do not call net_unregister if net_udp_new failed
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/3] parameter: set p->value to NULL to avoid freeing it again
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/3] tftp: do not forget to close the file in error case
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Some (new-) network stack fixes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: ARM/AT91 build failure: Error: symbol *ABS* is in a different section
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- ARM/AT91 build failure: Error: symbol *ABS* is in a different section
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 8/8] mx25 3ds: add support for boot from UART
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: barebox for i.MX51
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- barebox for i.MX51
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH 8/8] mx25 3ds: add support for boot from UART
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Add support for Eukrea CPUIMX35
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH 1/2] eukrea_cpuimx25: add compressed logo support
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH 8/8] mx25 3ds: add support for boot from UART
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 8/8] mx25 3ds: add support for boot from UART
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: OMAP 3530 arch_shutdown "undefined instruction"
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 8/8] mx25 3ds: add support for boot from UART
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] mx2 GPIO OCRx register
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: OMAP 3530 arch_shutdown "undefined instruction"
- From: "Luca Ceresoli" <list@xxxxxxxxxxxxxxxx>
- Re: [PATCH 8/8] mx25 3ds: add support for boot from UART
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 1/2] eukrea_cpuimx25: add compressed logo support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Add support for Eukrea CPUIMX35
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: barebox with usb cdc-eth driver?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 8/8] mx25 3ds: add support for boot from UART
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/8] i.MX25 3DS fixes and enhancements
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] cpuimx25: remove unused define
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 1/2] eukrea_cpuimx25: add compressed logo support
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 2/2] eukrea_cpuimx25: update defconfig
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] Add support for Eukrea CPUIMX35
- From: Eric Bénard <eric@xxxxxxxxxx>
- barebox with usb cdc-eth driver?
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: script error
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] mx25 3ds: fix memory initialization
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 2/8] mx25: fix typo in imx25-regs.h
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 0/8] i.MX25 3DS fixes and enhancements
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 1/8] mx25 3ds: fix build failure
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 5/8] i2c: add driver for the MC34704 PMIC
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 8/8] mx25 3ds: add support for boot from UART
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 6/8] mx25 3ds: add support for i2c master and PMIC
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 4/8] mx25: add support for i2c
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 7/8] mx25 3ds: fix fec initialization
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 3/8] mx25 3ds: cleanup lowlevel_init code
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH] i2c: fix adapter_list manipulation
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH] mx2 GPIO OCRx register
- From: Teresa Gamez <T.Gamez@xxxxxxxxx>
- [PATCH 11/13] rework device parameters
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 10/13] net: remove old network stack
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/13] implement nfs using new network stack
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/13] implement dhcp using new network stack
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/13] implement tftp using new network stack
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/13] net: Implement a new network stack
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/13] implement ping using new network stack
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 13/13] add netconsole support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/13] net: consider rarp support as outdated. Remove it
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/13] network drivers: call net_receive directly instead of NetReceive
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 12/13] errno: add strings for network related error messages
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/13] remove unused sntp.h
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/13] net: remove need for eth_halt/eth_open
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- reworking the network stack
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: script error
- From: Eric Bénard <eric@xxxxxxxxxx>
- script error
- From: Erwin Rol <mailinglists@xxxxxxxxxxxx>
- barebox-2010.06.0
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] eukrea_cpuimx27_defconfig: increase MALLOC_SIZE
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: OMAP 3530 arch_shutdown "undefined instruction"
- From: Orjan Friberg <of@xxxxxxxxxxxx>
- Re: OMAP 3530 arch_shutdown "undefined instruction"
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- OMAP 3530 arch_shutdown "undefined instruction"
- From: Orjan Friberg <of@xxxxxxxxxxxx>
- Re: barebox tftp to 2k pagesize NAND
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: barebox tftp to 2k pagesize NAND
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- [PATCH 2/3] eukrea_cpuimx25: fix machine ID
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 3/3] eukrea_cpuimx25: update env
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 1/3] arm: update mach-types
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: barebox tftp to 2k pagesize NAND
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: barebox tftp to 2k pagesize NAND
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- barebox tftp to 2k pagesize NAND
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 6/6] eukrea_cpuimx27: update defconfig
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 5/6] eukrea_cpuimx27: update env
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH v6 3/6] commands: add i2c commands
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 4/6] eukrea_cpuimx27: add fb support
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH v2 2/6] i2c: implement i2c_get_adapter()
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 1/6] i2c-imx: change log level for No ACK
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH v4 3/6] commands: add i2c commands
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH v4 3/6] commands: add i2c commands
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH v4 3/6] commands: add i2c commands
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH v4 3/6] commands: add i2c commands
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH v5] commands: add i2c commands
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH v4 3/6] commands: add i2c commands
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH v4 3/6] commands: add i2c commands
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 6/6] eukrea_cpuimx27: update defconfig
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 5/6] eukrea_cpuimx27: update env
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 4/6] eukrea_cpuimx27: add fb support
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 1/6] i2c-imx: change log level for No ACK
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH v4 3/6] commands: add i2c commands
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH v2 2/6] i2c: implement i2c_get_adapter()
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH 1/2] Add support for Eukrea's CPUIMX25
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 3/4] commands: add i2c commands
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 3/4] commands: add i2c commands
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 3/4] commands: add i2c commands
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 2/4] i2c: implement i2c_get_adapter()
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 3/4] commands: add i2c commands
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 4/4] eukrea_cpuimx27: add fb support
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 2/4] i2c: implement i2c_get_adapter()
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 1/4] i2c-imx: change log level for No ACK
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH 2/3] commands: add i2c commands
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 2/3] commands: add i2c commands
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 3/3] i2c: implement i2c_get_adapter()
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 1/3] i2c-imx: change log level for No ACK
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 1/2] Add support for Eukrea's CPUIMX25
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 2/2] pcm043: fix wrong test
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH 2/3] i2c: add i2cdev driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: board_init_lowlevel_return: Error: symbol ABS is in a different section
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- Re: board_init_lowlevel_return: Error: symbol ABS is in a different section
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] i2c: add i2cdev driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 3/3] commands: add i2c commands
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- board_init_lowlevel_return: Error: symbol ABS is in a different section
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- Re: [PATCH 3/3] commands: add i2c commands
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 2/3] i2c: add i2cdev driver
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 3/3] commands: add i2c commands
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 1/3] i2c-imx: change log level for No ACK
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] i.MX27: add required defines for I2C2
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH] cfi_flash_intel: support 1024b buffer write
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] cfi_flash_intel: support 1024b buffer write
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] eukrea_cpuimx27: allow compilation without LP3972 selected
- From: Eric Bénard <eric@xxxxxxxxxx>
- RE: V3 patches for imx35pdk boot
- From: "Marc Reilly" <marc@xxxxxxxxxxxxxxx>
- RE: Watchdog support
- From: "Marc Reilly" <marc@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] Add support for Eukrea's CPUIMX25
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2] Add support for Eukrea's CPUIMX25
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] Add support for Eukrea's CPUIMX25
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH v2] Add support for Eukrea's CPUIMX25
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH 3/3] freescale-mx*5-3-stack : fix __flash_header_start
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] i.MX25 : add Framebuffer support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] Add support for Eukrea's CPUIMX25
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: V3 patches for imx35pdk boot
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Watchdog support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- RE: Watchdog support
- From: "Marc Reilly" <marc@xxxxxxxxxxxxxxx>
- Re: Watchdog support
- From: Erwin Rol <mailinglists@xxxxxxxxxxxx>
- RE: Watchdog support
- From: "Marc Reilly" <marc@xxxxxxxxxxxxxxx>
- [PATCH 5/5] imx35pdk: Detect and set silicon and board revision for boot params.
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 3/5] imx35: add detection of silicon revision
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 4/5] imx35pdk: correct mode for display contrast pin
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 1/5] arm: Add revision tag to boot parameters
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 2/5] arm boot: Formatting
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- V3 patches for imx35pdk boot
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 2/3] Add support for Eukrea's CPUIMX25
- From: Eric Benard <eric@xxxxxxxxxx>
- [PATCH 1/3] i.MX25 : add Framebuffer support
- From: Eric Benard <eric@xxxxxxxxxx>
- [PATCH 3/3] freescale-mx*5-3-stack : fix __flash_header_start
- From: Eric Benard <eric@xxxxxxxxxx>
- Re: [PATCH 4/6] imx35pdk: correct mode for display contrast pin
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 4/6] imx35pdk: correct mode for display contrast pin
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 6/6] imx35pdk: make COMPARE pad a GPIO1_5 output
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Watchdog support
- From: Erwin Rol <mailinglists@xxxxxxxxxxxx>
- [PATCH 6/6] imx35pdk: make COMPARE pad a GPIO1_5 output
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 5/6] imx35pdk: Detect and set silicon and board revision for boot params.
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 4/6] imx35pdk: correct mode for display contrast pin
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 3/6] imx35: add detection of silicon revision
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 2/6] arm boot: Formatting
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- Ammended patches for imx35pdk boot
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 1/6] arm: Add revision tag to boot parameters
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] Detect CPU and board revision for freescale-mx35-3-stack and add to boot parameters
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/3] mx35-3stack: fix Pad selection for CONTRAST pin.
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 2/3] Detect CPU and board revision for freescale-mx35-3-stack and add to boot parameters
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 1/3] Add passing of revision tag when booting the kernel on ARM platforms.
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- Revision boot params to kernel for ARM and mx35 3 stack fixes
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- Re: [PATCH 09/17] pcm043: Speed up NAND controller before copying barebox image
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- barebox-2010.05.0
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 09/17] pcm043: Speed up NAND controller before copying barebox image
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- [PATCH 15/17] pcm043: reimplement lowlevel code in C
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 13/17] arm: reimplement startup code in C
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/17] ARM: use memalign in dma_alloc_coherent to assure alignment
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/17] ARM: update icache functions to use get_cr/set_cr
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 10/17] add arm helper function to determine the program counter
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/17] pcm043: Speed up NAND controller before copying barebox image
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 16/17] i.MX35: Fix ahbclock calculation
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 17/17] pcm038: reimplement lowlevel code in C
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/17] fix _update scripts
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- patches for next v2
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/17] fsl_udc: make it work with MMU on
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/17] i.MX35 stack: Fix mc9sdz60 reset register offset
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 11/17] arm: remove unused variables from header file
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/17] Increase MAX_FILES to 128
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 14/17] i.MX: remove __REG from esd controller regs. use readl/writel instead
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/17] ARM: Add get_cr/set_cr functions
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/17] define __LINUX_ARM_ARCH__ for armv6 processors
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 12/17] arm: move __mmu_cache_flush to bare_init section
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Fix build if MULTI_ENV_HANDLING is disabled
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 10/14] arm: reimplement startup code in C
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 07/14] add arm helper function to determine the program counter
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 10/14] arm: reimplement startup code in C
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 07/14] add arm helper function to determine the program counter
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 12/14] pcm043: reimplement lowlevel code in C
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 10/14] arm: reimplement startup code in C
- From: Shinya Kuribayashi <shinya.kuribayashi.px@xxxxxxxxxxx>
- Re: some more patches for -next
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- [PATCH] Fix build if MULTI_ENV_HANDLING is disabled
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- Re: [PATCH 1/7] give nice output when generating barebox.bin and barebox.S
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/14] fsl_udc: make it work with MMU on
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/14] pcm043: Speed up NAND controller before copying barebox image
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 13/14] i.MX35: Fix ahbclock calculation
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 12/14] pcm043: reimplement lowlevel code in C
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 10/14] arm: reimplement startup code in C
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- some more patches for -next
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 11/14] i.MX: remove __REG from esd controller regs. use readl/writel instead
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 14/14] pcm038: reimplement lowlevel code in C
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/14] arm: move __mmu_cache_flush to bare_init section
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/14] add arm helper function to determine the program counter
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/14] fix _update scripts
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/14] arm: remove unused variables from header file
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/14] Increase MAX_FILES to 128
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/14] ARM: use memalign in dma_alloc_coherent to assure alignment
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/14] i.MX35 stack: Fix mc9sdz60 reset register offset
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/7] give nice output when generating barebox.bin and barebox.S
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 2/7] imx/gpio: make gpio_get_value actually work
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/7] imx/gpio: make gpio_get_value actually work
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- Re: [PATCH 1/7] give nice output when generating barebox.bin and barebox.S
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- Re: [PATCH v2] MX25PDK: Add support for 64MiB DDR2 SDRAM
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v2] MX25PDK: Add support for 64MiB DDR2 SDRAM
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- Re: [PATCH] MX25PDK: Add support for 64MiB DDR2 SDRAM
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 7/7] nor: Don't use the sector for the unlock sequence
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 6/7] clock: fix possible error on overflow in is_timeout
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 5/7] board/pcm038: document value written to ESDCFG0
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 4/7] cfi_flash: use flash_write_word instead of reimplementing it again
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 3/7] arm: update mach-types
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/7] imx/gpio: make gpio_get_value actually work
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/7] give nice output when generating barebox.bin and barebox.S
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Updated MPC5200B support (pcm030, kp-mcb2, ...)
- From: Carsten Schlote <c.schlote@xxxxxxxxxxxxxx>
- [PATCH 6/7] clock: fix possible error on overflow in is_timeout
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- Re: [PATCH 2/7] imx/gpio: make gpio_get_value actually work
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- Re: [PATCH] MX25PDK: Add support for 64MiB DDR2 SDRAM
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- Re: [PATCH 2/7] imx/gpio: make gpio_get_value actually work
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 6/7] wip: fix possible error on overflow in is_timeout
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 7/7] nor: Don't use the sector for the unlock sequence
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH 6/7] wip: fix possible error on overflow in is_timeout
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH 5/7] board/pcm038: document value written to ESDCFG0
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH 1/7] give nice output when generating barebox.bin and barebox.S
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH 4/7] cfi_flash: use flash_write_word instead of reimplementing it again
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH 3/7] arm: update mach-types
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- Patch series derived from latest project
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- [PATCH 2/7] imx/gpio: make gpio_get_value actually work
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- Re: [PATCH] tftp return value
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] MX25PDK: Add support for 64MiB DDR2 SDRAM
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Patches for default environment path handling
- From: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
- [PATCH 2/2] move parsing and check for default env into common makefile
- From: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
- [PATCH 1/2] Makefile: fix detection of absolute environment path
- From: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
- Re: booting uImage for mx35 3stack
- From: "'Sascha Hauer'" <s.hauer@xxxxxxxxxxxxxx>
- RE: booting uImage for mx35 3stack
- From: "Marc Reilly" <marc@xxxxxxxxxxxxxxx>
- [PATCH] MX25PDK: Add support for 64MiB DDR2 SDRAM
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- Re: booting uImage for mx35 3stack
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- booting uImage for mx35 3stack
- From: "Marc Reilly" <marc@xxxxxxxxxxxxxxx>
- Re: [PATCH] fix miiphy alloc
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] tftp return value
- From: Jan Weitzel <J.Weitzel@xxxxxxxxx>
- [PATCH] fix miiphy alloc
- From: Jan Weitzel <J.Weitzel@xxxxxxxxx>
- Re: mx35 3stack LCD power enable
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- mx35 3stack LCD power enable
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- Re: barebox-2010.04.0
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- barebox-2010.04.0
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Splash screen on mx35 3 stack
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: Splash screen on mx35 3 stack
- From: "'Sascha Hauer'" <s.hauer@xxxxxxxxxxxxxx>
- RE: [PATCH 2/3] omap3: 3430sdp: add choice of UARTs for console
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- RE: [PATCH 1/3] omap3: rename defconfigs to align with kernel
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [PATCH 3/3] omap3: 3430sdp: Update defconfig
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- Re: [PATCH 2/3] omap3: 3430sdp: add choice of UARTs for console
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- Re: [PATCH 1/3] omap3: rename defconfigs to align with kernel
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- [PATCH 2/3] omap3: 3430sdp: add choice of UARTs for console
- From: Anand Gadiyar <gadiyar@xxxxxx>
- [PATCH 3/3] omap3: 3430sdp: Update defconfig
- From: Anand Gadiyar <gadiyar@xxxxxx>
- [PATCH 1/3] omap3: rename defconfigs to align with kernel
- From: Anand Gadiyar <gadiyar@xxxxxx>
- RE: Splash screen on mx35 3 stack
- From: "Marc Reilly" <marc@xxxxxxxxxxxxxxx>
- [PATCH] MX21ADS: Support LCD panel
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- [PATCH] i.MX21: support framebuffer
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- Re: Splash screen on mx35 3 stack
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: Splash screen on mx35 3 stack
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Splash screen on mx35 3 stack
- From: "Marc Reilly" <marc@xxxxxxxxxxxxxxx>
- Re: [PATCH] MX21ADS: Support booting from NAND
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] MX21ADS: Support booting from NAND
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- Re: [PATCH] trivial: fix command case for erase usage line
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 01/12] ARM zImage: do memmap if possible
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 08/12] echo: add -e option support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 08/12] echo: add -e option support
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- [PATCH 10/12] add l2x0 cache support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 12/12] netx eth driver: remove local definition of ARRAY_SIZE
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/12] pass arguments to dma_* as unsigned long as the kernel does
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/12] ARM: Add a wrapper around dma_* functions
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- More patches for next merge window
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 11/12] pcm043: enable l2x0 cache
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/12] remove now unused arch_execute
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/12] make panic and hang __noreturn functions
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/12] blackfin: implement arch_shutdown call
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/12] introduce a arch_shutdown call and call it from shutdown_barebox
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/12] go command: shutdown barebox before calling an application
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/12] ARM: replace cleanup_before_linux with the generic shutdown_barebox function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/12] make reset_cpu a __noreturn function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 06/12] add unlzo support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 01/12] ARM zImage: do memmap if possible
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH 01/12] ARM zImage: do memmap if possible
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 01/12] ARM zImage: do memmap if possible
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH 04/12] imx_nand: use memcpy for copying from/to buffer
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- Re: [PATCH 11/12] hush: only remove backslashes introduced from glob
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] u-boot-v2: fix typos in documentation
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/12] add unaligned access support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/12] add process_escape_sequence function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/12] add unlzo support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/12] imx_nand: use memcpy for copying from/to buffer
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/12] ARM zImage: do memmap if possible
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 11/12] hush: only remove backslashes introduced from glob
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Patches for next merge window
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/12] echo: add -e option support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/12] add snprintf function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 12/12] hush: allow fancy prompts
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/12] nand_imx: use optimized memcpy
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/12] nand_imx: Speed up sequential read
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 10/12] echo command: Add -e option
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] u-boot-v2: fix typos in documentation
- From: Németh Márton <nm127@xxxxxxxxxxx>
- Re: [PATCH] hush: Fix return code when calling 'exit' inside loops
- From: Jan Weitzel <J.Weitzel@xxxxxxxxx>
- [PATCH 3/5] add multi environment support
- From: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
- [PATCH 1/5] fix error return value while loading environment
- From: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
- Environment handling fixes and support for multiple environment backends
- From: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
- [PATCH 4/5] Add multi env support to saveenv and loadenv commands.
- From: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
- [PATCH 5/5] add general check_and_erase callback to environment handling
- From: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
- [PATCH 2/5] crc value handling and dry run mode in envfs_load
- From: Luotao Fu <l.fu@xxxxxxxxxxxxxx>
- [PATCH] trivial: fix command case for erase usage line
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH V2] Documentation: fix typos & correct symlink
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Barebox working on freescale-mx25-3-stack?
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: Barebox working on freescale-mx25-3-stack?
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- Re: Barebox working on freescale-mx25-3-stack?
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: Barebox working on freescale-mx25-3-stack?
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- [PATCH V2] Documentation: fix typos & correct symlink
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- Re: [PATCH] hush: Fix return code when calling 'exit' inside loops
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] MX21: Fix nand booting
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- [PATCH] hush: Fix return code when calling 'exit' inside loops
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Barebox working on freescale-mx25-3-stack?
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: Barebox working on freescale-mx25-3-stack?
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: Barebox working on freescale-mx25-3-stack?
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: Barebox working on freescale-mx25-3-stack?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Barebox working on freescale-mx25-3-stack?
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: Barebox working on freescale-mx25-3-stack?
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: Barebox working on freescale-mx25-3-stack?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Barebox working on freescale-mx25-3-stack?
- From: Eric Bénard <eric@xxxxxxxxxx>
- Barebox working on freescale-mx25-3-stack?
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: [PATCH] MX21: Fix nand booting
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] MX21ADS: Support booting from NAND
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- [PATCH] MX21: Fix nand booting
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- Re: [RFC] imx21ads nand boot
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- Re: [PATCH] i.MX25 : fix define name for clock frequency
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] Add support for Eukrea's CPUIMX25
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] armv5: use proper cache flush function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: some cache related patches
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] armv5: use proper cache flush function
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] i.MX25 : fix define name for clock frequency
- From: Eric Benard <eric@xxxxxxxxxx>
- [PATCH 4/4] Add support for Eukrea's CPUIMX25
- From: Eric Benard <eric@xxxxxxxxxx>
- [PATCH 3/4] i.MX25 : change IOMUX for LD16 and LD17
- From: Eric Benard <eric@xxxxxxxxxx>
- [PATCH 1/4] i.MX25 : add Framebuffer support
- From: Eric Benard <eric@xxxxxxxxxx>
- [PATCH 2/4] i.MX25 : add lcdc clock support
- From: Eric Benard <eric@xxxxxxxxxx>
- Re: [RFC] imx21ads nand boot
- From: Alessandro Rubini <rubini-list@xxxxxxxxx>
- Re: [RFC] imx21ads nand boot
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [RFC] imx21ads nand boot
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [RFC] imx21ads nand boot
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- some cache related patches
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/2] armv5: use proper cache flush function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] remove unused file arch/arm/cpu/cache.S
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Make some help comments less confusing
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Make some help comments less confusing
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] give nice output when generating barebox.bin and barebox.S
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [Patch] hush exit code fix
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Barebox does not boot on iMX21ADS board
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] Barebox does not boot on iMX21ADS board
- From: Jaccon Bastiaansen <jaccon.bastiaansen@xxxxxxxxx>
- [Patch] hush exit code fix
- From: Jan Weitzel <J.Weitzel@xxxxxxxxx>
- exit command
- From: Jan Weitzel <J.Weitzel@xxxxxxxxx>
- Barebox 2010.03.0 is out
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] Fix doc style
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] Documentation: fix typos & correct symlink
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH] Documentation: fix typos & correct symlink
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- Re: [PATCH] edb93xx: Fix SDRAM precharge
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] edb93xx: Fix SDRAM precharge
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: [PATCH 00/11] arch/arm and other random cleanups
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 00/11] arch/arm and other random cleanups
- From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
- Re: problem with env in NOR
- From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
- problem with env in NOR
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 05/11] drivers/video/Makefile: cleanup propper indention
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 06/11] start-arm: cleanup: propper indention
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 00/11] arch/arm and other random cleanups
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 05/11] drivers/video/Makefile: cleanup propper indention
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 04/11] arm/cpu/Makefile: cleanup: propper indention
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 09/11] import recent include/linux/compiler*.h
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 00/11] arch/arm and other random cleanups
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 01/11] arm/Kconfig: delete trailing whitespace
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 11/11] common.h: add compile time check helper functions
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 07/11] i2c.h: fix typo in copyright
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 10/11] io.h: update definitions of __raw_{read,write}*
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 08/11] ioreadsb: put the whole ioreadsb function into the .text.readsb section
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 03/11] arm/Makefile: keep list of boards sorted
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 06/11] start-arm: cleanup: propper indention
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 02/11] arm/Kconfig: removed unused TAG options
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH] i.MX35: Fix pad control bit positions
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Fix compile time errors when DEBUG is defined
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Regarding nandwrite issue for huge files ?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Regarding nandwrite issue for huge files ?
- From: R Arun Kumar <paiarunk@xxxxxxxxx>
- Re: [PATCH] edb93xx: Fix comment in edb93xx_console_init()
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] edb93xx: Fix SDRAM initialization
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Flash drivers, was: IXP4xx support
- From: Krzysztof Halasa <khc@xxxxxxxxx>
- [PATCH] edb9302(a): Tweak PLL settings
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: [PATCH] i.MX35: Fix pad control bit positions
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] Fix compile time errors when DEBUG is defined
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] edb93xx: Fix comment in edb93xx_console_init()
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH] edb93xx: Fix SDRAM initialization
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH 5/6] cfi_flash: remove old driver and switch to new one
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Clean up flash driver confusion
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/6] cfi_flash_new: generate flash erase dots in common function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/6] cfi_flash_new: Fix Intel chips
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 4/6] cfi_flash_new: make code more readable, return is not a function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/6] cfi_flash_new: Safe indention level by bailing out earlier in error case
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 6/6] cfi_flash: move include/cfi_flash.c next to driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] EP93xx: Fix system controller register definitions
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: IXP4xx support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- RE: barebox for leopardboard
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: Flash drivers, was: IXP4xx support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Flash drivers, was: IXP4xx support
- From: Krzysztof Halasa <khc@xxxxxxxxx>
- Re: IXP4xx support
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH] EP93xx: Fix system controller register definitions
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH] edb93xx: Avoid stack usage in early_udelay()
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH] edb93xx: Enable UART1
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- IXP4xx support
- From: Krzysztof Halasa <khc@xxxxxxxxx>
- Re: barebox for leopardboard
- From: Anand Gadiyar <gadiyar@xxxxxxxxx>
- Re: barebox for leopardboard
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: barebox for leopardboard
- From: "Tyler W. Wilson" <tyler@xxxxxxxxxxxxx>
- Re: barebox for leopardboard
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- barebox for leopardboard
- From: "Tyler W. Wilson" <tyler@xxxxxxxxxxxxx>
- Re: about the MAINTAINERS file
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- newbie problem with kconfig
- From: Alessandro Rubini <rubini-list@xxxxxxxxx>
- Re: [PATCH] Documentation/porting.txt: s/barebox/u-boot/ wrongly renamed
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- about the MAINTAINERS file
- From: Alessandro Rubini <rubini-list@xxxxxxxxx>
- [PATCH] Documentation/porting.txt: s/barebox/u-boot/ wrongly renamed
- From: Alessandro Rubini <rubini-list@xxxxxxxxx>
- Re: [PATCH] ep93xx eth driver: dump_xxx() cleanup
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] ep93xx eth driver: dump_xxx() cleanup
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH] ep93xx eth driver: Remove unnecessary parentheses in constant definitions
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: [PATCH] ep93xx eth driver: Reorder functions to eliminate need for prototypes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ep93xx eth driver: Fix dump_xxx_queue() parameter list
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] ep93xx eth driver: Reorder functions to eliminate need for prototypes
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH] ep93xx eth driver: Fix dump_xxx_queue() parameter list
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: [PATCH 0/2] smc91111 mac address and cfi flash fixes
- From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
- barebox.2010.02.0 is out
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 0/2] smc91111 mac address and cfi flash fixes
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 1/2] smc91111: fix odering of mac address read from EEPROM
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 2/2] cfi_flash: fix alignment problem
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH] i.MX35: Fix pad control bit positions
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 1/1] Fix nand_imx for i.MX21
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/1] Fix nand_imx for i.MX21
- From: Ivo Clarysse <ivo.clarysse@xxxxxxxxx>
- Re: [PATCH] mach-at91: reset_cpu: fix confusing reference to watchdog
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 03/12] cache functions from kernel
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] Fix typo in board.dox
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Patches for -next
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Fix typo in board.dox
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/12] Move tftp/nfs specific code to net/*
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/12] remove unused cdp code
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/12] remove unused NETCONSOLE stuff
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/12] replace ET_DEBUG with pr_debug
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 10/12] put only once used function inline
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/12] remove unused file common/flash.c
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/12] remove typedef cmd_tbl_t and replace it with struct command
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/12] remove obsolete comment
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/12] cache functions from kernel
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Patches for -next
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[Index of Archives]
[Linux Embedded]
[Linux USB Devel]
[Video for Linux]
[Linux SCSI]
[Samba]
[Yosemite News]