hi,
i'm trying to run barebox on a Freescale i.MX25 3-Stack board. for
this purpose i built barebox with the freescale-mx25-3-stack
defconfig, using the toolchain provided by the Freescale BSP (i also
tried it with a custom one). i then dumped the barebox.bin on a MMC
card, plugged the card into the socket of the board and switched the
board on, but nothing happened :(
booting u-boot or redboot from MMC succeeds, so the settings of SW21
and SW22 shouldn't be the problem
is barebox supposed to work on this board or is the port still in
preliminary state?
best regards
--
Matthias Kaehlcke
Embedded Linux Developer
Barcelona
Nothing is more despicable than respect based on fear
(Albert Camus)
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
