Hi Matthias, On Tue, Mar 23, 2010 at 02:32:17PM +0100, Matthias Kaehlcke wrote: > hi, > > i'm trying to run barebox on a Freescale i.MX25 3-Stack board. for > this purpose i built barebox with the freescale-mx25-3-stack > defconfig, using the toolchain provided by the Freescale BSP (i also > tried it with a custom one). i then dumped the barebox.bin on a MMC > card, plugged the card into the socket of the board and switched the > board on, but nothing happened :( I just checked, it works, but not with the current defconfig. Please enable CONFIG_ARCH_IMX_INTERNAL_BOOT to boot from MMC. Note that currently the CPLD is not initialised in barebox and so the FEC is not working (It is working if barebox runs as a second stage loader after Freescales redboot). Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
