Hi Matthias,
Le 23/03/2010 14:32, Matthias Kaehlcke a écrit :
i'm trying to run barebox on a Freescale i.MX25 3-Stack board. for
this purpose i built barebox with the freescale-mx25-3-stack
defconfig, using the toolchain provided by the Freescale BSP (i also
tried it with a custom one). i then dumped the barebox.bin on a MMC
card, plugged the card into the socket of the board and switched the
board on, but nothing happened :(
booting u-boot or redboot from MMC succeeds, so the settings of SW21
and SW22 shouldn't be the problem
is barebox supposed to work on this board or is the port still in
preliminary state?
you can check the patch I sent last friday, it works fine on our i.MX25
board for NAND boot (MMC boot not tested yet).
I'll post an updated version of the patch in a few days as per Sascha's
comments + a few tuning in the env.
Eric
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
