Hi, On Mon, Jun 28, 2010 at 11:36 AM, Juergen Beisert <jbe@xxxxxxxxxxxxxx> wrote: > Eric Bénard wrote: >> Hi Marek, >> >> Le 28/06/2010 11:08, Belisko Marek a écrit : >> > I disable autostart and download barebox image to 0x8000 with >> > tftp 0x8000 barebox.bin and then jut go 0x8000 ended with: >> > ## Starting application at 0x00008000 ... >> >> if I remember well, on AT91 SDRAM is at 0x20000000 so actually you don't >> seem to load it in SDRAM. >> For the binary to execute properly, you should load it at the right >> target address in SDRAM. > > If barebox detects its current runtime address differs from the link address > it copies itself to the link address first. > > So writing it anywhere into sdram should work. But only, if also the link > address is in the sdram area... Seems it's not working in my case. U-boot code just jump to address which is taken as argument according code. If barebox is copied to correct link address and started it should work. Is there any possibility to check link address from binary or it's not necessary to use mkimage tool from u-boot? > > jbe > > -- > Pengutronix e.K. | Juergen Beisert | > Linux Solutions for Science and Industry | Phone: +49-8766-939 228 | > Vertretung Sued/Muenchen, Germany | Fax: +49-5121-206917-5555 | > Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de/ | > Marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite icq: 290551086 web: http://open-nandra.com _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
