On Tue, Mar 23, 2010 at 04:09:15PM +0100, Matthias Kaehlcke wrote: > hi sascha, > > El Tue, Mar 23, 2010 at 03:26:43PM +0100 Sascha Hauer ha dit: > > > On Tue, Mar 23, 2010 at 02:32:17PM +0100, Matthias Kaehlcke wrote: > > > hi, > > > > > > i'm trying to run barebox on a Freescale i.MX25 3-Stack board. for > > > this purpose i built barebox with the freescale-mx25-3-stack > > > defconfig, using the toolchain provided by the Freescale BSP (i also > > > tried it with a custom one). i then dumped the barebox.bin on a MMC > > > card, plugged the card into the socket of the board and switched the > > > board on, but nothing happened :( > > > > I just checked, it works, but not with the current defconfig. Please > > enable CONFIG_ARCH_IMX_INTERNAL_BOOT to boot from MMC. Note that > > currently the CPLD is not initialised in barebox and so the FEC is not > > working (It is working if barebox runs as a second stage loader after > > Freescales redboot). > > thanks for checking and for your reply > > i enabled CONFIG_ARCH_IMX_INTERNAL_BOOT, but it doesn't work either. i > also tried to start barebox from NAND, but no way :( > > the barebox version is v2010.03.0, i forgot to mention that in my > initial post > > if you can send me the barebox image that works on your board i'll > check if it works on mine, and we'll have some more certainty about > whether there is some obscure problem in my build process or my board > is somehow different to yours I sent the image to you in private. Here are my dip switch settings, I don't know which of them are important: On the baseboard: sw22: 00000000 sw21: 11000000 On the Debug board: sw5 .. SW10: 0 Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
