Hello all.
I connect a usb device to my board but I can't see the device on /dev.
Is it usual?
I should see a /dev/usb0-20 device file?
jlxx:/ usb
USB: scanning bus for devices...
...
usb0-2: 1516:8628 FlashDisk
usb0-1: 0000:0000 EHCI Host Controller
2 USB Device(s) found
jlxx:/ devinfo
devices:
|----imx_serial0
|----cs0
|----ramfs0
|----devfs0
|----mem0 (defaultenv)
|----mem1 (mem)
|----cfi_flash0 (nor0, self, env, nor0.uboot, nor0.kernel, nor0.root)
|----mem2 (ram0)
|----fec_imx0
|----miiphy0 (phy0)
|----eth0
|----imxfb0
|----fb0 (fb0)
|----ehci0
|----usb0-20
|----usb0-10
drivers:
imx_serial
ramfs
devfs
fec_imx
miiphy
cfi_flash
ehci
imxfb
mem
jlxx:/ ls /dev
zero defaultenv mem nor0 ram0
phy0 fb0 self env nor0.uboot
nor0.kernel nor0.root
Thanks in avance
--
José Luis Zabalza
jlz.3008 a t gmail.com
Linux Counter 172551
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
