This series of patches includes the following: 1. Fixes and clean-ups for the i.MX25 3DS board code 2. New driver for the i.MX25 3DS on-board PMIC 3. Enable proper FEC initialization including PHY power supply enable 4. Add support for boot from UART on the i.MX25 3DS Note that currently there is no watchdog service routine. Since the UART boot mode enables the watchdog, this means that you can only have Barebox running for 90 seconds before the watchdog resets the CPU. Baruch Siach (8): mx25 3ds: fix build failure mx25: fix typo in imx25-regs.h mx25 3ds: cleanup lowlevel_init code mx25: add support for i2c i2c: add driver for the MC34704 PMIC mx25 3ds: add support for i2c master and PMIC mx25 3ds: fix fec initialization mx25 3ds: add support for boot from UART arch/arm/mach-imx/Kconfig | 5 + arch/arm/mach-imx/include/mach/imx25-regs.h | 3 +- arch/arm/mach-imx/include/mach/iomux-mx25.h | 4 +- arch/arm/mach-imx/speed-imx25.c | 5 + board/freescale-mx25-3-stack/3stack.c | 87 ++++++++++------ board/freescale-mx25-3-stack/lowlevel_init.S | 18 ++-- drivers/i2c/Kconfig | 3 + drivers/i2c/Makefile | 1 + drivers/i2c/mc34704.c | 140 ++++++++++++++++++++++++++ include/i2c/mc34704.h | 26 +++++ 10 files changed, 247 insertions(+), 45 deletions(-) create mode 100644 drivers/i2c/mc34704.c create mode 100644 include/i2c/mc34704.h _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
