U-Boot V2 Development (Barebox)
[Prev Page][Next Page]
- [PATCH 12/12] i.MX: select armv6 for i.MX31/35
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 11/12] add armv6 support to the konfig system
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/12] pcm043: initialize cpufreq to 532MHz
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Current status of barebox for OMAP3530/beagle
- From: "Luca Ceresoli" <list@xxxxxxxxxxxxxxxx>
- Re: Current status of barebox for OMAP3530/beagle
- From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
- Barbox in OpenEmbedded
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 1/2] give nice output when generating barebox.bin and barebox.S
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 2/2] arm: make disabling the cache actually work
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH] arm cache fixes
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: Current status of barebox for OMAP3530/beagle
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Current status of barebox for OMAP3530/beagle
- From: "Luca Ceresoli" <list@xxxxxxxxxxxxxxxx>
- [PATCH] mach-at91: reset_cpu: fix confusing reference to watchdog
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH 0/8] update i.MX35 3stack and i2c drivers
- From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
- [PATCH 8/8] i.MX35 3stack: update of defconfig
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 7/8] i.MX35 3stack: update environemnt to support jffs and ubi/ubifs
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 1/8] mc9sdz60: clean up driver interface
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 2/8] mc13892: clean up driver interface
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 3/8] i.MX35 3stack: adopt board to new mc13892 and mc9sdz60 driver interface
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 6/8] i.MX35 3stack: increase env partition to hold splash image
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 5/8] i.MX35 3stack: clean up indention of lowlevel_init
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 0/8] update i.MX35 3stack and i2c drivers
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 4/8] i.MX35 3stack: clean up indention
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] eukrea_cpuimx27 : update timings
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] documentation: It's U-Boot that doesn't have getopt, not Barebox
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCHv3] addpart: support @<offset>
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCHv3] addpart: support @<offset>
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCHV2] addpart: support @<offset>
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- [PATCHV2] addpart: support @<offset>
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- [PATCH] addpart: support @<offset>
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- [PATCH 4/4] Eukrea CPUIMX27 : add I2C and LP3972 support
- From: Eric Benard <eric@xxxxxxxxxx>
- [PATCH 3/4] I2C : add NS LP3972 PMIC support
- From: Eric Benard <eric@xxxxxxxxxx>
- [PATCH 1/4] eukrea_cpuimx27 : update timings
- From: Eric Benard <eric@xxxxxxxxxx>
- [PATCH 2/4] Add necessary clocks & defines to get I2C support for i.MX27
- From: Eric Benard <eric@xxxxxxxxxx>
- [PATCH] documentation: It's U-Boot that doesn't have getopt, not Barebox
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: compiling barebox/u-boot-v2 for beagleboard
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- compiling barebox/u-boot-v2 for beagleboard
- From: pgmspam20101@xxxxxxxxxxx
- Re: [PATCH 0/5] Add support for EDB93xx boards [rev2]
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCHv2 00/14] Bring in basic x86 support into 'barebox'
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 5/5] Add support for EDB93xx boards
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH 4/5] Add PrimeCell PL010 serial driver
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH 3/5] Add support for EP9xx GPIOs
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH 2/5] Add EP93xx ethernet driver
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH 1/5] ARM: Add support for EP93xx SoCs
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH 0/5] Add support for EDB93xx boards [rev2]
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: [PATCH] Add support for EDB93xx boards [rev2]
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCHv2 07/14] Add functions to be able to boot with BIOSs help
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2 00/14] Bring in basic x86 support into 'barebox'
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2 04/14] Adding required architecture header files
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2 12/14] Add a low level disk drive access driver
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2 01/14] Add a tool to activate barebox as a boot loader on x86 architectures
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2 10/14] Start to add ATA support to barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2 11/14] Add the main disk driver
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2 03/14] Adding x86 usage documentation to the tree
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2 05/14] Bring in the first x86 specific code
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2 14/14] Add the whole x86 architecture to the build system
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2 09/14] Bring in the time reference for the x86 platforms
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2 06/14] Add some generic functions to make x86 work
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2 13/14] Add a special command to load and start a bzImage on x86
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2 08/14] Add a generic PC platform
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCHv2 02/14] Consider real and protected mode in the dump file
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] Add support for EDB93xx boards [rev2]
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] Add support for EDB93xx boards [rev2]
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH] Add EP93xx ethernet driver [rev2]
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: [PATCH] Fix a data abort with fec_imx
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] Fix a data abort with fec_imx
- From: Eric Benard <eric@xxxxxxxxxx>
- Re: [PATCH 0/5] Add support for EDB93xx boards
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/5] Add support for EDB93xx boards
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: [PATCH 2/5] Add EP93xx ethernet driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/5] Add support for EDB93xx boards
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 5/5] Add support for EDB93xx boards
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH 2/5] Add EP93xx ethernet driver
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH 3/5] Add support for EP9xx GPIOs
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH 4/5] Add PrimeCell PL010 serial driver
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH 1/5] ARM: Add support for EP93xx SoCs
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH 0/5] Add support for EDB93xx boards
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- RE: Query on default environment
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: [PATCH 0/2] CFI flash drivers: Fix misleading trace when unprotecting a sector
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: confusion about relocation (ARM)
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH 2/2] New CFI flash driver: Fix misleading trace when unprotecting a sector
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH 0/2] CFI flash drivers: Fix misleading trace when unprotecting a sector
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH 1/2] CFI flash driver: Fix misleading trace when unprotecting a sector
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: confusion about relocation (ARM)
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: confusion about relocation (ARM)
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- RE: [PATCH 1/1] net: Exclude code based on selected protocol
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: confusion about relocation (ARM)
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Fix typo in board.dox
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] fix path specs in arch/arm/mach-arm.dox
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/1] net: Exclude code based on selected protocol
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: confusion about relocation (ARM)
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: confusion about relocation (ARM)
- From: Eric Bénard <eric@xxxxxxxxxx>
- confusion about relocation (ARM)
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH] Fix typo in board.dox
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- [PATCH] fix path specs in arch/arm/mach-arm.dox
- From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
- Re: i.MX25 NAND status
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: i.MX25 NAND status
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: i.MX25 NAND status
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- i.MX25 NAND status
- From: Eric Bénard <eric@xxxxxxxxxx>
- Query on default environment
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: barebox-2009.12.0 is out
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: barebox-2009.12.0 is out
- From: Anand Gadiyar <gadiyar@xxxxxxxxx>
- Re: barebox-2009.12.0 is out
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: barebox-2009.12.0 is out
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: barebox-2009.12.0 is out
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: barebox-2009.12.0 is out
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCHv2 1/1] net: Exclude code based on selected protocol
- From: Sanjeev Premi <premi@xxxxxx>
- Re: barebox-2009.12.0 is out
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 1/1] net: Exclude code based on selected protocol
- From: Sanjeev Premi <premi@xxxxxx>
- [PATCH 0/1] Exclude code based on config
- From: Sanjeev Premi <premi@xxxxxx>
- Re: barebox-2009.12.0 is out
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- barebox-2009.12.0 is out
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: building for sandbox, warning: "__BIG_ENDIAN" is not defined
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: building for sandbox, warning: "__BIG_ENDIAN" is not defined
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: building for sandbox, warning: "__BIG_ENDIAN" is not defined
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: which drivers subdirs should be automatically selected?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: which drivers subdirs should be automatically selected?
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: which drivers subdirs should be automatically selected?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Fix typo, "CFG_LONGHELP" -> "CONFIG_LONGHELP".
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: [PATCH] Fix typo, "CFG_LONGHELP" -> "CONFIG_LONGHELP".
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- building for sandbox, warning: "__BIG_ENDIAN" is not defined
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: PROPOSED patch, standardize drivers menuconfig entries
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- PROPOSED patch, standardize drivers menuconfig entries
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: which drivers subdirs should be automatically selected?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: which drivers subdirs should be automatically selected?
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- which drivers subdirs should be automatically selected?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: [PATCH] drivers: use "menuconfig" consistently for all selections.
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- [PATCH] Fix typo, "CFG_LONGHELP" -> "CONFIG_LONGHELP".
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: [PATCH] drivers: use "menuconfig" consistently for all selections.
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH] drivers: use "menuconfig" consistently for all selections.
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: can someone explain this CONFIG_COMMANDS, CFG_CMD thing?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- barebox on twitter?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- anyone object to my making some menuconfig options 1-touch selectable?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- can someone explain this CONFIG_COMMANDS, CFG_CMD thing?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: [PATCH] Remove PPC support for IDE.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Remove obsolete comment referring to CFG_CMD_JFFS2.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH repeat] MTD: Correct typo in preprocessor directive.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] Remove PPC support for IDE.
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- [PATCH] Remove obsolete comment referring to CFG_CMD_JFFS2.
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: more CONFIG oddities in the current barebox tree
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: more CONFIG oddities in the current barebox tree
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Remove/adjust erroneous references to CONFIG_MODULE.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: more CONFIG oddities in the current barebox tree
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- [PATCH] Remove/adjust erroneous references to CONFIG_MODULE.
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: [PATCH] commands: Remove reference to non-existent CONFIG_CMD_I2C.
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- [PATCH repeat] MTD: Correct typo in preprocessor directive.
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: [PATCH] commands: Remove reference to non-existent CONFIG_CMD_I2C.
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: [PATCH] commands: Remove reference to non-existent CONFIG_CMD_I2C.
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH] commands: Remove reference to non-existent CONFIG_CMD_I2C.
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: [PATCH] commands: Remove reference to non-existent CONFIG_CMD_I2C.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] commands: Remove reference to non-existent CONFIG_CMD_I2C.
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: [PATCH] scripts: Delete non-barebox content from scripts/.
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: [PATCH] scripts: Delete non-barebox content from scripts/.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] commands: correct "CONFIG_SIMPLE_PARSER" to "CONFIG_SHELL_SIMPLE".
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] NAND: Free asprintf()-allocated space upon mtd device deletion.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] scripts: Delete non-barebox content from scripts/.
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: possible memory leak in commands/nand.c?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] commands: correct "CONFIG_SIMPLE_PARSER" to "CONFIG_SHELL_SIMPLE".
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: can barebox avoid creating typedefs just for struct shortcuts?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: the "CONFIG_" namespace and what's with "CFG_CMD_" prefixes?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- apparently unused <linux/...> header files
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- [PATCH] NAND: Free asprintf()-allocated space upon mtd device deletion.
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: more CONFIG oddities in the current barebox tree
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: more CONFIG oddities in the current barebox tree
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- can barebox avoid creating typedefs just for struct shortcuts?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: possible memory leak in commands/nand.c?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: unused CONFIG variables in current barebox tree
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: Correct Kconfig typo, "optimzed" -> "optimized".
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: possible memory leak in commands/nand.c?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- possible memory leak in commands/nand.c?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: barebox on beagleboard: two questions
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: barebox on beagleboard: two questions
- From: Anand Gadiyar <gadiyar@xxxxxxxxx>
- barebox on beagleboard: two questions
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- the "CONFIG_" namespace and what's with "CFG_CMD_" prefixes?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- more CONFIG oddities in the current barebox tree
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- [PATCH] MTD: Correct typo in preprocessor directive.
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- unused CONFIG variables in current barebox tree
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- Re: is barebox meant to be the next generation of u-boot?
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- [PATCH] ARM: Correct Kconfig typo, "optimzed" -> "optimized".
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- is barebox meant to be the next generation of u-boot?
- From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
- [PATCH 31/36] i.MX35 3stack: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 12/36] i2c: Add a no-op i2c_register_board_info if i2c is disabled
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 33/36] beagle board: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 32/36] sdp3430: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 10/36] i.MX nand: mx21 has a v1 type controller
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 21/36] pcm043: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 29/36] Digi a9m2440: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 17/36] pca100: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 15/36] mx21ads: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 28/36] Digi a9m2410: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 11/36] vsprintf: Only define PAGE_SIZE if not already defined
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 20/36] scb9328: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 27/36] at91sam9263ek: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 36/36] Fix barebox Version number
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 35/36] Makefile: clean barebox.ldr
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 22/36] pm9263: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 23/36] netx: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/36] Remove unnecessary casts in key defines
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 18/36] mx27ads: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 19/36] ipe337: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/36] imx ipu fb: Make fb_videomode const
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 34/36] omap3_evm: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/36] replace // style comments
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/36] ipe337: add missing include
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 13/36] sandbox: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 25/36] eukrea cpuimx27: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- barebox Patches
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/36] pcm037: Add missing include
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/36] scb9328: setup chipselect the correct way
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/36] i.MX25 3stack: fixup flash header to new names/layout
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/36] read_key: Use ARRAY_SIZE instead of hardcoded value
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/36] netx: enable second ethernet device
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 30/36] i.MX25 3stack: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 26/36] at91sam9260ek: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 16/36] pcm037: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 24/36] mmccpu: update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 14/36] pcm030: Update defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Renaming done / new repository
- From: Shinya Kuribayashi <skuribay@xxxxxxxxx>
- Re: Renaming done / new repository
- From: Bjoern Buerger <b.buerger@xxxxxxxxxxxxxx>
- [PATCH] readline: keys should be unsigned char consistently
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: Renaming done / new repository
- From: Shinya Kuribayashi <shinya.kuribayashi@xxxxxxxxx>
- Re: [PATCHv2 0/2] Initial support for OMAP3EVM
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Renaming done / new repository
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] cramfs: probe(): fix cdev lookup
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] cramfs: probe(): fix cdev lookup
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: Renaming done / new repository
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH] cramfs: probe(): fix cdev lookup
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH] cramfs: probe(): fix cdev lookup
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] omap3evm: Minimal default configuration
- From: Sanjeev Premi <premi@xxxxxx>
- [PATCH 1/2] omap3evm: Add basic support for the board
- From: Sanjeev Premi <premi@xxxxxx>
- [PATCHv2 0/2] Initial support for OMAP3EVM
- From: Sanjeev Premi <premi@xxxxxx>
- Renaming done / new repository
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- u-boot-v2 list renamed to barebox@xxxxxxxxxxxxxxxxxxx
- From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
- [PATCH 2/2] arm/lib: add missing abi helper functions __aeabi_idivmod, __aeabi_uidivmod
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 1/2] arm/lib: add eabi names of helper functions
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 0/2] arm/lib: EABI fixes
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH] cramfs: probe(): fix cdev lookup
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] cramfs: probe(): fix cdev lookup
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH] cramfs: probe(): fix cdev lookup
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- RE: [PATCH 0/4] Initial support for OMAP3EVM
- From: "Premi, Sanjeev" <premi@xxxxxx>
- [PATCH] Documentation: update reference to sandbox environment
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH] Cleanup some more collateral damage from renaming
- From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
- Re: [PATCH] cramfs: probe(): fix cdev lookup
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] sandbox: common: fix device names for environment files (-e)
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] cramfs: probe(): fix cdev lookup
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH] Cleanup some more collateral damage from renaming
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH] cramfs: probe(): fix cdev lookup
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH] cramfs: probe(): fix cdev lookup
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH] cramfs: probe(): fix cdev lookup
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- [PATCH] sandbox: common: fix device names for environment files (-e)
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH 0/4] Initial support for OMAP3EVM
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Add a define to prevent doxygen to scan things it should not see (fixed version)
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] Turn on CONFIG_CMD_MEMORY in Beagle Board defconfig.
- From: "Luca Ceresoli" <list@xxxxxxxxxxxxxxxx>
- [PATCH 4/4] omap3evm: Minimal default configuration
- From: Sanjeev Premi <premi@xxxxxx>
- [PATCH 3/4] omap3evm: Update Makefile
- From: Sanjeev Premi <premi@xxxxxx>
- [PATCH 2/4] omap3evm: Minimal board initialization
- From: Sanjeev Premi <premi@xxxxxx>
- [PATCH 1/4] omap3evm: Add to configuration
- From: Sanjeev Premi <premi@xxxxxx>
- [PATCH 0/4] Initial support for OMAP3EVM
- From: Sanjeev Premi <premi@xxxxxx>
- [PATCH 1/1] cpuimx27 : use flash bbt
- From: Eric Benard <eric@xxxxxxxxxx>
- Re: [PATCH] Some doxygen related fixes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Some doxygen related fixes
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: V2 RC10 via OE cross compile to OMAP3
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: V2 RC10 via OE cross compile to OMAP3
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: V2 RC10 via OE cross compile to OMAP3
- From: "Freeman P. Pascal IV" <pascal@xxxxxxxxxx>
- Re: V2 RC10 via OE cross compile to OMAP3
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- V2 RC10 via OE cross compile to OMAP3
- From: "Freeman P. Pascal IV" <pascal@xxxxxxxxxx>
- Re: [PATCH] Some doxygen related fixes
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- Re: [[RFC] 01/14] Add a tool to activate barebox as a boot loader on x86 architectures
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [[RFC] 01/14] Add a tool to activate barebox as a boot loader on x86 architectures
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [[RFC] 01/14] Add a tool to activate barebox as a boot loader on x86 architectures
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] Some doxygen related fixes
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] Add a define to prevent doxygen to scan things it should not see (fixed version)
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH] Add a define to prevent doxygen to scan things it should not see (fixed version)
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: /dev/ram0 requires CONFIG_CMD_MEMORY?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Add a define to prevent doxygen to scan things it should not see (fixed version)
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] Fix some exported names
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3430-SDP: Compile fixes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Add a define to prevent doxygen to scan things it should not see
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] Add a define to prevent doxygen to scan things it should not see
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [[RFC] 07/14] Add functions to be able to boot with BIOSs help
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [[RFC] 13/14] Add a special command to load and start a bzImage on x86
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [[RFC] 04/14] Adding required architecture header files
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [[RFC] 12/14] Add a low level disk drive access driver
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [[RFC] 01/14] Add a tool to activate barebox as a boot loader on x86 architectures
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [[RFC] 14/14] Add the x86 architecture to the build system
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [[RFC] 06/14] Add some generic functions to make x86 work
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [[RFC] 09/14] Bring in the time reference for the x86 platforms
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [[RFC] 08/14] Add a generic PC platform
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [[RFC] 05/14] Bring in the first x86 specific code
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [[RFC] 11/14] Add the main disk driver
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [[RFC] 10/14] Start to add ATA support to barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [[RFC] 03/14] Adding x86 usage documentation to the tree
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [[RFC] 02/14] From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [[RFC] 00/14] Bring in x86 support into 'barebox'
- From: Alessandro Rubini <rubini-list@xxxxxxxxx>
- Re: [[RFC] 00/14] Bring in x86 support into 'barebox'
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [[RFC] 00/14] Bring in x86 support into 'barebox'
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [[RFC] 00/14] Bring in x86 support into 'barebox'
- From: Mike Frysinger <vapier.adi@xxxxxxxxx>
- Re: [[RFC] 00/14] Bring in x86 support into 'barebox'
- From: Alessandro Rubini <rubini-list@xxxxxxxxx>
- Re: [[RFC] 00/14] Bring in x86 support into 'barebox'
- From: Mike Frysinger <vapier.adi@xxxxxxxxx>
- RE: [[RFC] 00/14] Bring in x86 support into 'barebox'
- From: "Andy Pont" <andy.pont@xxxxxxxxxxxxxx>
- [[RFC] 00/14] Bring in x86 support into 'barebox'
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- /dev/ram0 requires CONFIG_CMD_MEMORY?
- From: "list@xxxxxxxxxxxxxxxx" <list@xxxxxxxxxxxxxxxx>
- [PATCH] Fix some exported names
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] Add a define to prevent doxygen to scan things it should not see
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 00/13] Clean malloc() implementation
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 13/16] omap: Use correct label in arch/arm/Makefile
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- [PATCH 3/4] i2c-imx: fix low bitrate problem
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 1/4] i2c-imx: print errors with dev_err
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 4/4] i2c-imx: i2c_imx_xfer return with err if sub-transfer isn't successfull
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 2/4] i2c-imx: fix clear IFF race condition
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 0/4] improve i.MX i2c driver
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 3/3] nand_imx.c : remove unused code
- From: Eric Benard <eric@xxxxxxxxxx>
- [PATCH 2/3] nand_imx.c : add reset command
- From: Eric Benard <eric@xxxxxxxxxx>
- [PATCH 1/3] Fix imx_nand_set_layout for i.MX27
- From: Eric Benard <eric@xxxxxxxxxx>
- Re: [PATCH 04/16] mx35 3stack display support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] OMAP3430-SDP: Compile fixes
- From: Anand Gadiyar <gadiyar@xxxxxx>
- [PATCH 03/16] fb: Add a i.MX IPU framebuffer driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 14/16] let linker create a link map
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 15/16] i.MX31: Fix CCM_UPCTL register offset
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/16] complete i.MX GPIO support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 16/16] remove unused include files
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/16] pcm043: add display support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/16] command line gpio support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/16] i.MX: split out iomux-v1 support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 10/16] pcm043: Add MMU support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 13/16] omap: Use correct label in arch/arm/Makefile
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/16] mx35 3stack display support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 12/16] beagle board: Compile fixes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/16] introduce GENERIC_GPIO label
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/16] imxfb: show only for relevant i.MXs
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/16] fb: Add FB_SYNC_ defines from kernel
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 11/16] omap: Add missing include
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Patches
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] arm/Makefile: don't set ABI unconditionally to "apcs-gnu"
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- pull request (was: Re: [PATCH] arm/Makefile: don't set ABI unconditionally to "apcs-gnu")
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH] arm/Makefile: don't set ABI unconditionally to "apcs-gnu"
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: RFC: Name of the command to boot a linux kernel on x86
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 01/10] i.MX Nand: Set correct datawidth/pagesize in CCM module
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH 01/10] i.MX Nand: Set correct datawidth/pagesize in CCM module
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- PATCH : nand_imx.c : add reset command
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: Build fails on omap3530_beagle_per_uart_defconfig
- From: Anand Gadiyar <gadiyar@xxxxxxxxx>
- Re: Build fails on omap3530_beagle_per_uart_defconfig
- From: Anand Gadiyar <gadiyar@xxxxxxxxx>
- Re: Build fails on omap3530_beagle_per_uart_defconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] arm/Makefile: don't set ABI unconditionally to "apcs-gnu"
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Build fails on omap3530_beagle_per_uart_defconfig
- From: Anand Gadiyar <gadiyar@xxxxxxxxx>
- Re: RFC: Name of the command to boot a linux kernel on x86
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 01/10] i.MX Nand: Set correct datawidth/pagesize in CCM module
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH 01/10] i.MX Nand: Set correct datawidth/pagesize in CCM module
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: RFC: Name of the command to boot a linux kernel on x86
- From: Alessandro Rubini <rubini-list@xxxxxxxxx>
- Re: RFC: Name of the command to boot a linux kernel on x86
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: RFC: Name of the command to boot a linux kernel on x86
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: RFC: Name of the command to boot a linux kernel on x86
- From: Alessandro Rubini <rubini-list@xxxxxxxxx>
- RFC: Name of the command to boot a linux kernel on x86
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 05/10] clock.c: use USECOND and MSECOND
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 04/10] clock.h: use types.h not linux/types.h
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/10] i.MX35 3stack: several enhancements
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/10] i.MX flash header: make it work on i.MX35
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- some patches
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/10] nand: refuse to write data if not beginning on a page boundary
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/10] i.MX Nand: Set correct datawidth/pagesize in CCM module
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/10] i.MX: remove obsolete V2 Nand driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/10] nand: do not write empty pages. Needed for writing UBI images
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 10/10] PCA100: initialize pll in assembler code
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/10] clock.h: use types.h not linux/types.h
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/10] NAND: Allow to read oob data
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/10] clock.c: use USECOND and MSECOND
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: The Project formerly known as U-Boot-v2
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: The Project formerly known as U-Boot-v2
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- The Project formerly known as U-Boot-v2
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [OT] about package names
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- Re: [OT] about package names
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [OT] about package names
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [OT] about package names
- From: Mike Frysinger <vapier.adi@xxxxxxxxx>
- Re: [OT] about package names
- From: Alessandro Rubini <ru@xxxxxxxxx>
- Re: [OT] about package names
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- [OT] about package names
- From: Alessandro Rubini <ru@xxxxxxxxx>
- Re: [PATCH] Unify driver's menu also for video
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Documentation/porting.txt: fix some spelling mistakes ...
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] Unify driver's menu also for video
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] Adding IPU clock query functions for i.MX31 and i.MX35
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Adding some documentation
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] Adding IPU clock query functions for i.MX31 and i.MX35
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 00/13] Clean malloc() implementation
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 02/11] clock.h: uses uint?_t types, so include types.h
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Adding some documentation
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 02/11] clock.h: uses uint?_t types, so include types.h
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 02/11] clock.h: uses uint?_t types, so include types.h
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 00/11] imx related cleanups and enhancements
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 00/11] imx related cleanups and enhancements
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH] Unify driver's menu also for video
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 05/11] spi: dev->id is an int, not a string, fix debug output
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH] Unify driver's menu also for video
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 00/13] Clean malloc() implementation
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 00/11] imx related cleanups and enhancements
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 3/4] mc13892: driver added
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/4] i2c-imx: ported to u-boot-v2
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 05/11] spi: dev->id is an int, not a string, fix debug output
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 00/11] imx related cleanups and enhancements
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] pcm043 cannot be linked without enabled NAND support
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] i2c: new framework
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] Unify driver's menu also for video
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/4] i2c-imx: ported to u-boot-v2
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 3/4] mc13892: driver added
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 1/4] i2c: new framework
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 0/4] RFC: small i2c framework for u-boot-v2
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 4/4] mc9sdz60: driver added
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 09/11] mx25-3stack, pcm043: use IMX_FEC_BASE define
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 05/11] spi: dev->id is an int, not a string, fix debug output
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 04/11] nand: ground dev_add_bb_dev if nand is disabled
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 06/11] speed-imx35: the gptclk is connected to the ipgclk
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 07/11] speed-imx35: add function imx_get_i2cclk
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 11/11] imx35-regs: add CGR1 helper values
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 08/11] imx-regs: define IMX_FEC_BASE
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 10/11] imx35-regs: add base address for I2C1
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 01/11] fec_imx: remove trailing whitespace
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 00/11] imx related cleanups and enhancements
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 03/11] nand: print size parameter as unsinged not as signed
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 02/11] clock.h: uses uint?_t types, so include types.h
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 00/13] Clean malloc() implementation
- From: Alessandro Rubini <rubini-list@xxxxxxxxx>
- [PATCH 08/13] Use nowadays function prototypes
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 10/13] Remove win32 support
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 05/13] Use the native void instead of Void_t
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 09/13] Remove debug code
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 04/13] Move private settings and configuration into the C source
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 07/13] After moving all declarations to the C source, do the same with the doc
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 13/13] Re-format the file
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 11/13] Use the global string functions
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 12/13] Combine memory initialization with the main memory functions.
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 02/13] Include the size_t declaration
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 00/13] Clean malloc() implementation
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 01/13] Move variables to bss
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 06/13] Remove confusing macros that hide the real functions names
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 03/13] Remove unused code
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: Naming conventions for disk drives
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: Naming conventions for disk drives
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: Naming conventions for disk drives
- From: Alessandro Rubini <rubini-list@xxxxxxxxx>
- [RFC] Adding a host tool to the u-boot-v2 source tree
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: Naming conventions for disk drives
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: Naming conventions for disk drives
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: Naming conventions for disk drives
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] at91sam9260ek: Reset ethernet phy during init
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Remove deadlock message
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: ENV_HANDLING requires CRC32
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Enable 'saveenv' for non eraseable media
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: How to embed a required host/cross tool
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- How to embed a required host/cross tool
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- ENV_HANDLING requires CRC32
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Enable 'saveenv' for non eraseable media
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Remove deadlock message
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Naming conventions for disk drives
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: clk framework in u-boot v2
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/3] at91: implement clock framework
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/3] clock: Introduce clock framework from Linux
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/3] initcall: add postconsole_initcall
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- clk framework in u-boot v2
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] Documentation/porting.txt: fix some spelling mistakes ...
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- ppc: clocksource doc vs. implementation?
- From: Martin Lund <mgl@xxxxxxxxxxxxxxxxxx>
- Re: arch/ppc questions
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- arch/ppc questions
- From: Esben Haabendal <esbenhaabendal@xxxxxxxxx>
- Re: [PATCH V2] arm: add configurable AEABI support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH V2] arm: add configurable AEABI support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH V2] arm: add configurable AEABI support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 7/7] arm: add configurable AEABI support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] remove duplicated list implementation
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 7/7] arm: add configurable AEABI support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/7] ARM: Optimisation and improvement
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] arm: add Debug Communications Channel serial driver support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 7/7] arm: add configurable AEABI support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/7] arm: remove non used cpu-y
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 6/7] arm: update cpu tunning
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 5/7] arm: add endian config support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/7] arm: use -marm as default when it's possible
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/7] arm: introduce CPU CONFIG from linux
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/7] arch/arm/Makefile: cleanup
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 0/7] ARM: Optimisation and improvement
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] remove duplicated list implementation
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: Arm Kconfig reorganisation
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] remove duplicated list implementation
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 6/7 V3] arm: move config ARCH_TEXT_BASE and BOARDINFO to mach Kconfig
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 7/7 V3] at91: Atmel Ref board fix config MACH to match with mach-types
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/7 V3] imx/kconfig: inverse the board selection
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 5/7 V3] netx/kconfig: inverse the board selection
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/7 V3] s3c/kconfig: inverse the board selection
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/7 V3] at91/kconfig: use similar kconfig presentation
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/7 V3] arm/kconfig: inverse the board selection
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: Arm Kconfig reorganisation
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 1/6] arm/kconfig: inverse the board selection
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/6] arm/kconfig: inverse the board selection
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] add bool types support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] add bool types support
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: [PATCH] add bool types support
- From: Alessandro Rubini <rubini-list@xxxxxxxxx>
- Re: [PATCH 1/6] arm/kconfig: inverse the board selection
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] driver: add dev_name inline
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] add bool types support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/1] pm9263: add nand support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/1] at91: add support for the at91sam9263ek board of Atmel
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] at91: Atmel Ref board fix config MACH to match with mach-types
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- [PATCH 6/6 V2] arm: move config ARCH_TEXT_BASE and BOARDINFO to mach Kconfig
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- [PATCH 6/6] arm: move config ARCH_TEXT_BASE and BOARDINFO to mach Kconfig
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- [PATCH 5/6] netx/kconfig: inverse the board selection
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- [PATCH 4/6] s3c/kconfig: inverse the board selection
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- [PATCH 3/6] mxc/kconfig: inverse the board selection
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- [PATCH 2/6] at91/kconfig: use similar kconfig presentation
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- [PATCH 1/6] arm/kconfig: inverse the board selection
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- Arm Kconfig reorganisation
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- [PATCH] driver: add dev_name inline
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- [PATCH] add bool types support
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- [PATCH 1/1] pm9263: add nand support
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- [RFC] ARM: generate mach-types.h instead of static version
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- [PATCH 1/1] at91: add support for the at91sam9263ek board of Atmel
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- [PATCH] arm: 8-byte align stack to avoid LDRD/STRD problems
- From: simon.kagstrom at netinsight.net (Simon Kagstrom)
- [PATCH] arm: 8-byte align stack to avoid LDRD/STRD problems
- From: s.hauer at pengutronix.de (Sascha Hauer)
- [PATCH] arm: 8-byte align stack to avoid LDRD/STRD problems
- From: simon.kagstrom at netinsight.net (Simon Kagstrom)
- [RFC] ARM: generate mach-types.h instead of static version
- From: s.hauer at pengutronix.de (Sascha Hauer)
- [PATCH 1/1] at91: add support for the at91sam9263ek board of Atmel
- From: s.hauer at pengutronix.de (Sascha Hauer)
- [RFC] ARM: generate mach-types.h instead of static version
- From: r.schwebel at pengutronix.de (Robert Schwebel)
- [RFC] ARM: generate mach-types.h instead of static version
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
- [PATCH 1/1] at91: add support for the at91sam9263ek board of Atmel
- From: plagnioj at jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
[Index of Archives]
[Linux Embedded]
[Linux USB Devel]
[Video for Linux]
[Linux SCSI]
[Samba]
[Yosemite News]