On Mon, Dec 7, 2009 at 5:01 PM, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote:
> Hi,
>
> On Sat, Dec 05, 2009 at 10:14:17PM +0530, Anand Gadiyar wrote:
>> Hi,
>>
>> This is my first attempt at building barebox. So I'm probably making
>> some silly mistake here.
>
> No, your commands look good, it's just that the omap configs are broken.
> The following patch at least allows to compile the config.
>
> Sascha
Thank you! This patch worked.
A similar patch was needed for the SDP board as well.
Will boot test tomorrow.
- Anand
>
>
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 51001c4..377210d 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -59,7 +59,7 @@ board-$(CONFIG_MACH_IMX27ADS) := imx27ads
> board-$(CONFIG_MACH_MMCCPU) := mmccpu
> board-$(CONFIG_MACH_MX1ADS) := mx1ads
> board-$(CONFIG_MACH_NXDB500) := netx
> -board-$(CONFIG_MACH_OMAP) := omap
> +board-$(CONFIG_ARCH_OMAP) := omap
> board-$(CONFIG_MACH_PCA100) := phycard-i.MX27
> board-$(CONFIG_MACH_PCM037) := pcm037
> board-$(CONFIG_MACH_PCM038) := pcm038
> diff --git a/arch/arm/mach-omap/syslib.c b/arch/arm/mach-omap/syslib.c
> index 51824da..4f70abc 100644
> --- a/arch/arm/mach-omap/syslib.c
> +++ b/arch/arm/mach-omap/syslib.c
> @@ -31,6 +31,7 @@
> */
>
> #include <config.h>
> +#include <common.h>
> #include <asm/io.h>
> #include <mach/syslib.h>
>
> diff --git a/board/omap/board-beagle.c b/board/omap/board-beagle.c
> index 282c532..368702d 100644
> --- a/board/omap/board-beagle.c
> +++ b/board/omap/board-beagle.c
> @@ -53,6 +53,7 @@
> #include <driver.h>
> #include <asm/io.h>
> #include <ns16550.h>
> +#include <asm/armlinux.h>
> #include <mach/silicon.h>
> #include <mach/sdrc.h>
> #include <mach/sys_info.h>
> @@ -244,32 +245,15 @@ static struct device_d sdram_dev = {
> .name = "mem",
> .map_base = 0x80000000,
> .size = 128 * 1024 * 1024,
> - .platform_data = &ram_pdata,
> + .platform_data = &sram_pdata,
> };
>
> -#ifndef CONFIG_CMD_MEMORY
> -static struct driver_d ram_drv = {
> - .name = "ram",
> - .probe = dummy_probe,
> - .open = dev_open_default,
> - .close = dev_close_default,
> - .read = mem_read,
> - .write = mem_write,
> - .lseek = dev_lseek_default,
> -};
> -#endif
> -
> static int beagle_devices_init(void)
> {
> int ret;
> ret = register_device(&sdram_dev);
> if (ret)
> goto failed;
> -#ifndef CONFIG_CMD_MEMORY
> - ret = register_driver(&ram_drv);
> - if (ret)
> - goto failed;
> -#endif
> #ifdef CONFIG_GPMC
> /* WP is made high and WAIT1 active Low */
> gpmc_generic_init(0x10);
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
_______________________________________________
u-boot-v2 mailing list
u-boot-v2@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/u-boot-v2
