Hello, On Thu, Jan 14, 2010 at 01:02:39PM -0600, pgmspam20101@xxxxxxxxxxx wrote: > Hello, > > I am trying to do the next stage of my build: i.e. building xloader(u-boot-v2) > that I can load over USB using Nishant Menon's utilities (pusb). > > I went and downloaded the beagleboard version of uboot-v2 from: > http://www.pengutronix.de/software/u-boot/v2/download/ Please get the newer version here (or directly from git): http://barebox.org/download/barebox-2009.12.0.tar.bz2 > > [pgmutasi@ u-boot-2.0.0-rc10]$ make -f Makefile ARCH=arm CROSS_COMPILE=/opt/ > WindRiver/wrlinux-3.0/layers/wrll-toolchain-4.3-85/arm/toolchain/x86-linux2/bin > /arm-wrs-linux-gnueabi- > scripts/kconfig/conf -s arch/arm/Kconfig > SYMLINK include/asm-arm/arch -> include/asm-arm/arch-omap > SYMLINK include/asm-arm/proc -> include/asm-arm/proc-armv > CHK include/linux/version.h > UPD include/linux/version.h > CHK include/linux/utsrelease.h > UPD include/linux/utsrelease.h > SYMLINK include/asm -> include/asm-arm > SYMLINK include/config.h -> board/omap/config.h > CC scripts/mod/empty.o > scripts/mod/empty.c:1: error: bad value (armv7a) for -march= switch > make[2]: *** [scripts/mod/empty.o] Error 1 > make[1]: *** [scripts/mod] Error 2 > make: *** [scripts] Error 2 It seems you compiler is too old. I get the same error with our gcc-4.1.2 based toolchain, but I do not with a gcc-4.3.2 based toolchain. As an alternative you might wan't to use the following patch (untested): >From dc8d5391eec8d0e05d72ef1390b73f0a6639ff05 Mon Sep 17 00:00:00 2001 From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Date: Fri, 15 Jan 2010 09:01:34 +0100 Subject: [PATCH] armv7: use -march=armv6 to compile v7 code -march=armv7-a is available only in in newer gccs (>=4.3.2?) To make this work use 'mcr p15, 0, r10, c7, c5, 4' instead of isb as seen in the kernel head.S Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> --- arch/arm/Makefile | 2 +- arch/arm/cpu/start-arm.S | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index ede2085..ab241dc 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -19,7 +19,7 @@ comma = , # Note that GCC does not numerically define an architecture version # macro, but instead defines a whole series of macros which makes # testing for a specific architecture or later rather impossible. -arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a) +arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv6) arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t) arch-$(CONFIG_CPU_32v4T) :=-D__LINUX_ARM_ARCH__=4 -march=armv4t diff --git a/arch/arm/cpu/start-arm.S b/arch/arm/cpu/start-arm.S index a30b281..6858dbc 100644 --- a/arch/arm/cpu/start-arm.S +++ b/arch/arm/cpu/start-arm.S @@ -152,7 +152,7 @@ inval_loop1: cmp r1, #2 /* see what cache we have at this level */ blt skip_inval /* skip if no cache, or just i-cache */ mcr p15, 2, r10, c0, c0, 0 /* select current cache level in cssr */ - isb /* isb to sych the new cssr&csidr */ + mcr p15, 0, r10, c7, c5, 4 /* isb to sych the new cssr&csidr */ mrc p15, 1, r1, c0, c0, 0 /* read the new csidr */ and r2, r1, #7 /* extract the length of the cache lines */ add r2, r2, #4 /* add 4 (line length offset) */ @@ -178,7 +178,7 @@ skip_inval: finished_inval: mov r10, #0 /* swith back to cache level 0 */ mcr p15, 2, r10, c0, c0, 0 /* select current cache level in cssr */ - isb + mcr p15, 0, r10, c7, c5, 4 /* isb */ #endif /* CONFIG_CPU_V7_DCACHE_SKIP */ #else -- 1.6.6 -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
