On Tue, Feb 16, 2010 at 09:44:03PM +0100, Marc Kleine-Budde wrote: > Hello, > > on my PXA270 I put a splash image into the environment. The env image > with the splash image covers more than one flash sector. (The flash > sector size is 256 KiB.) > > Loading the environment fails: > > uboot:/ loadenv /dev/env0 > loading environment from /dev/env0 > read: error -262116 > > (This fails during boot, too.) > > [frogger@hardanger:barebox (dev/pxa270)]$ grep CFI .config > CONFIG_HAS_CFI=y > CONFIG_DRIVER_CFI=y > # CONFIG_DRIVER_CFI_NEW is not set > CONFIG_DRIVER_CFI_OLD=y > CONFIG_CFI_BUFFER_WRITE=y > > Sascha it's probably the problem we discussed the other day, that the > cfi driver doesn't handle the offset correct. I haven't looked at the > code though. Yes, saveenv probably saves the whole environment with one write call whereas other writes usually don't cross sector boundaries and so the bug never showed up Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
