U-Boot V2 Development (Barebox)
[Prev Page][Next Page]
- [PATCH 06/10] eukrea_cpuimx25: update board support
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 02/10] mx25: add MMC clock support
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 04/10] mci-core: add more tested SD Cards
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 10/10] eukrea_cpuimx35: update board support
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 03/10] MX25: fix IOMUX for ESDHC1 pins
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 07/10] imx35-regs: add defines for USB and SD
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 05/10] epautoconf: fix compile error
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 01/10] imx/clocksource: enable GPT1 before using it on CPUIMX25
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH 5/5] [drivers/nor] Fixed mismatch in prototype
- From: Carsten Schlote <carsten.schlote@xxxxxxx>
- [PATCH 3/5] [kp-mcb2] Added board files and configs for konzeptpark mcb2
- From: Carsten Schlote <carsten.schlote@xxxxxxx>
- [PATCH 2/5] [ppc/mpc5xxx] Small text cleanups and ADDECR to output
- From: Carsten Schlote <carsten.schlote@xxxxxxx>
- [PATCH 4/5] [compiler] Added OPTIMIZE options to enable GCC optimizer
- From: Carsten Schlote <carsten.schlote@xxxxxxx>
- [PATCH 1/5] [ppc/mpc5xxx] Fixed typo in cpu_init.c
- From: Carsten Schlote <carsten.schlote@xxxxxxx>
- [PATCH] eukrea_cpuimx35: update defconfig
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] eukrea_cpuimx35: update board support
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH] unbreak bootm
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] unbreak bootm
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: pull-request: kp-mcb2 board files and configuration, GCC 4.5.x optimizer workaround, powerpc mach changes
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] unbreak bootm
- From: Eric Bénard <eric@xxxxxxxxxx>
- pull-request: kp-mcb2 board files and configuration, GCC 4.5.x optimizer workaround, powerpc mach changes
- From: Carsten Schlote <c.schlote@xxxxxxxxxxxxxx>
- Re: [PATCH] unbreak bootm
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] unbreak bootm
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH] unbreak bootm
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] eukrea_cpuimx27: update board support
- From: Eric Bénard <eric@xxxxxxxxxx>
- [PATCH] unbreak bootm
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH v3] Add basic support from ARM Versatile/PB
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v3] Add basic support from ARM Versatile/PB
- From: Alexey Zaytsev <alexey.zaytsev@xxxxxxxxx>
- Where to store a header file
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] nhk8815: use defaultenv
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 13/17] defaultenv: handle disk partitions
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH v3] Add basic support from ARM Versatile/PB
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 4/4] Adapt the defconfig for a full blown ChumbyOne support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v3] Add basic support from ARM Versatile/PB
- From: Alexey Zaytsev <alexey.zaytsev@xxxxxxxxx>
- Re: [PATCH v2] Add basic support from ARM Versatile/PB
- From: Alexey Zaytsev <alexey.zaytsev@xxxxxxxxx>
- [PATCH 4/4] Adapt the defconfig for a full blown ChumbyOne support
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] Adapt the defconfig for a full blown ChumbyOne support
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH v2] Add basic support from ARM Versatile/PB
- From: Alexey Zaytsev <alexey.zaytsev@xxxxxxxxx>
- Re: [PATCH 4/4] Adapt the defconfig for a full blown ChumbyOne support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Add basic support from ARM Versatile/PB
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/4] Adapt the defconfig for a full blown ChumbyOne support
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 3/4] Spend the ChumbyOne a persistant environment memory on MCI card
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/4] Adapt the i.MX23 MCI driver to the v2 i.MX23 patch series
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/4] Glue i.MX23 and MCI support
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Bring together i.MX23, its MCI driver and the ChumbyOne
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/6] commands/crc32: add compare 2 files crc
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 6/6] defaultenv: add update_barebox to update barebox easly via tftp or xmodem
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/6] defaultenv/update: add check crc32 options
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 5/6] defaultenv: add xmodem support for update
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/6] defaultenv/update: merge update_rootfs and update_kernel
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/6] defaultenv: introduce CONFIG_DEFAULT_ENVIRONMENT_GENERIC to enable it
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Add basic support from ARM Versatile/PB
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Add basic support from ARM Versatile/PB
- From: Alexey Zaytsev <alexey.zaytsev@xxxxxxxxx>
- Re: [PATCH] Add basic support from ARM Versatile/PB
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 13/17] defaultenv: handle disk partitions
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- defaultv env update v2
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 13/17] defaultenv: handle disk partitions
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 11/17] mci: handle SD cards < 2.0 correctly
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 11/17] mci: handle SD cards < 2.0 correctly
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [PATCH] barebox-next: Avoid a Kconfig warning
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 13/17] defaultenv: handle disk partitions
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 11/17] mci: handle SD cards < 2.0 correctly
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] barebox-next: Avoid a Kconfig warning
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 11/17] mci: handle SD cards < 2.0 correctly
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 13/17] defaultenv: handle disk partitions
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 13/17] defaultenv: handle disk partitions
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 10/17] mfd mc13892: support reading the revision
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 17/17] ARM i.MX51: Add babbage board support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/17] i.MX27: Add support for SDHC pins
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/17] spi i.MX: redirect functions to version specific functions
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 15/17] ARM mmu: Call __mmu_cache_flush instead of hardcoded v4/v5 only function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/17] Move mfd drivers to drivers/mfd
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 14/17] imx_serial: Add mx51 support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/17] mci: Add i.MX esdhc support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/17] mfd mc13892: Add spi support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/17] move include files for mfd drivers to include/mfd
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/17] mci: print error code on failure
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/17] spi i.MX: Add i.MX51 support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 16/17] ARM i.MX: Add basic i.MX51 support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 11/17] mci: handle SD cards < 2.0 correctly
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/17] spi i.MX: add spi version namespace to register defines
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 13/17] defaultenv: handle disk partitions
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Patches for -next
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 12/17] mci: align write buffer if necessary
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 3/4] Add the i.MX23-EVK platform (WIP)
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/4] Add the basic files for the i.MX23/i.MX28 familiy of CPUs
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH v2] Add the i.MX23 architecure to barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 4/4] Add the i.MX23 based Chumby platform (WIP)
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 3/4] Add the i.MX23-EVK platform (WIP)
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/4] Add the driver for the i.MX23 debug UART
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] barebox-next: Avoid a Kconfig warning
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] Add basic support from ARM Versatile/PB
- From: Alexey Zaytsev <alexey.zaytsev@xxxxxxxxx>
- Re: [PATCH 3/3] hush: implement getopt builtin
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 3/5] defaultenv: add xmodem support for update
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Add basic support from ARM Versatile/PB
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH] Add basic support from ARM Versatile/PB
- From: Alexey Zaytsev <alexey.zaytsev@xxxxxxxxx>
- Re: [PATCH 00/13] OMAP/Beagleboard ehci support
- From: Anand Gadiyar <gadiyar@xxxxxxxxx>
- [PATCH 09/10] mci: Add i.MX27/31 driver
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 05/10] Add MCI card support to barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 10/10] ARM pca100: Add mci support
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 07/10] Add S3C2440 MCI card support
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 03/10] Don't use a sector buffer on stack
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 04/10] Don't try to guess the size of a disk if its size value is already given
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 08/10] i.MX27: Add mmc clock support in order to add an i.MX MCI driver
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 06/10] Add i.MX23 MCI card support
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 02/10] Make the disk driver less noisy
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH v2] Add MCI card support to barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 01/10] x-functions do not return in case of failure.
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 3/4] Add the i.MX23-EVK platform (WIP)
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/3 v2] hush: implement getopt builtin
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 3/3] hush: implement getopt builtin
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/5] defaultenv: introduce CONFIG_DEFAULT_ENVIRONMENT_GENERIC to enable it
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 3/3] hush: implement getopt builtin
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 3/5] defaultenv: add xmodem support for update
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [no subject]
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/3] hush: fix nasty memory leak in hush
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/3] hush: pass context around in shell
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/3] hush: implement getopt builtin
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] Switch the i.MX27's PLL in a safe manner
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: Switch the i.MX27's PLL in a safe manner
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [2nd try] Switch the i.MX27's PLL in a safe manner
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] Switch the i.MX27's PLL in a safe manner
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Switch the i.MX27's PLL in a safe manner
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 1/5] defaultenv: introduce CONFIG_DEFAULT_ENVIRONMENT_GENERIC to enable it
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 7/7] Add S3C2440 MCI card support
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 5/7] Add MCI card support to barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 7/7] Add S3C2440 MCI card support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 5/7] Add MCI card support to barebox
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/5] defaultenv: introduce CONFIG_DEFAULT_ENVIRONMENT_GENERIC to enable it
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] MAKEALL: allow CROSS_COMPILE*=""
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 5/5] nhk8815: use defaultenv
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/5] defaultenv: add xmodem support for update
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/5] defaultenv: add update_barebox to update barebox easly for tftp or xmodem
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/5] commands/crc32: add compare 2 files crc
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 5/7] Add MCI card support to barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/3] mci: rename mci_platformdata to mci_host, pass mci_host to host drivers
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/3] mci: Add i.MX27/31 driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [no subject]
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/3] ARM pca100: Add mci support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 5/7] Add MCI card support to barebox
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [RFC] Add MCI card support to barebox
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Add the i.MX23/i.MX28 architecure
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 4/4] Add the i.MX23 based Chumby platform (WIP)
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/4] Add the driver for the i.MX23 debug UART
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/4] Add the basic files for the i.MX23/i.MX28 familiy of CPUs
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 3/4] Add the i.MX23-EVK platform (WIP)
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 3/7] Don't use a sector buffer on stack
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 4/7] Don't try to guess the size of a disk if its size value is already given
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 6/7] Add i.MX23 MCI card support
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 7/7] Add S3C2440 MCI card support
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/7] Make the disk driver less noisy
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 5/7] Add MCI card support to barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/7] x-functions do not return in case of failure.
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [RFC] Add MCI card support to barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: Code "borrowed" without attribution to original authors
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 3/3] Add S3C2440 MCI card support
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [RFC] Add MMC support to barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 3/3] Add S3C2440 MCI card support
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [RFC] Add MMC support to barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 1/3] Add MMC support to barebox
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/3] Add i.MX23 MCI card support
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: Code "borrowed" without attribution to original authors
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: Code "borrowed" without attribution to original authors
- From: Wolfgang Denk <wd@xxxxxxx>
- Re: Code "borrowed" without attribution to original authors
- From: Wolfgang Denk <wd@xxxxxxx>
- Re: Code "borrowed" without attribution to original authors
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Code "borrowed" without attribution to original authors
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: Code "borrowed" without attribution to original authors
- From: Wolfgang Denk <wd@xxxxxxx>
- Re: Code "borrowed" without attribution to original authors
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Code "borrowed" without attribution to original authors
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: Code "borrowed" without attribution to original authors
- From: Wolfgang Denk <wd@xxxxxxx>
- Re: Code "borrowed" without attribution to original authors
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: Code "borrowed" without attribution to original authors
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Code "borrowed" without attribution to original authors
- From: Wolfgang Denk <wd@xxxxxxx>
- Re: SD/MMC driver for imx
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- SD/MMC driver for imx
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH] imx: fix Internal boot source default choice
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- v2010.10.0
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- m68k pull request
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 1/2] imx: Internal boot sources, handle all header offsets
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] imx: Internal boot sources, handle all header offsets
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH v4] MAKEALL: make it generic
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH v3] MAKEALL: make it generic
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: Failing to load Barebox Environment
- From: Gaurav Singh <gausinghnsit@xxxxxxxxx>
- Re: [PATCH] imx35: add base addresses for I2C and SDHC
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] imx35: add base addresses for I2C and SDHC
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- Re: [PATCH] imx35: add base addresses for I2C and SDHC
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: [PATCH v3] MAKEALL: make it generic
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] imx: Internal boot sources, handle all header offsets
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH v2] i2c-imx: wait for STOP before disabling controller
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] imx: Internal boot sources, handle all header offsets
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/2] Update flash headers for boards supporting internal boot.
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH 1/2] imx: Internal boot sources, handle all header offsets
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- Re: [PATCH] i2c-imx: wait for STOP before disabling controller
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] i2c-imx: wait for STOP before disabling controller
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH] imx35: add base addresses for I2C and SDHC
- From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
- [PATCH v3] MAKEALL: make it generic
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] at91sam9260/at91sam9263: use the same id as in the kernel for the uart devices
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: Failing to load Barebox Environment
- From: Gaurav Singh <gausinghnsit@xxxxxxxxx>
- Re: [PATCH v2] MAKEALL: make it generic
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2] MAKEALL: make it generic
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: Failing to load Barebox Environment
- From: Gaurav Singh <gausinghnsit@xxxxxxxxx>
- Re: Failing to load Barebox Environment
- From: Gaurav Singh <gausinghnsit@xxxxxxxxx>
- Re: Failing to load Barebox Environment
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: Failing to load Barebox Environment
- From: Gaurav Singh <gausinghnsit@xxxxxxxxx>
- Re: Failing to load Barebox Environment
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: Failing to load Barebox Environment
- From: Gaurav Singh <gausinghnsit@xxxxxxxxx>
- Re: Failing to load Barebox Environment
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Failing to load Barebox Environment
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH v2] MAKEALL: make it generic
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Failing to load Barebox Environment
- From: Gaurav Singh <gausinghnsit@xxxxxxxxx>
- Re: [PATCH v2] MAKEALL: make it generic
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH v2] MAKEALL: make it generic
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] import __stringify from linux
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Fix default baudrate setting
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v2] MAKEALL: make it generic
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/3] x86: add 64bit host build support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/3] linux16: fix cmd_tbl_t as struct command
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/3] x86: fix out of tree build support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Fix default baudrate setting
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH] Fix default baudrate setting
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] Fix default baudrate setting
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] MAKEALL: make it generic
- From: Mike Frysinger <vapier.adi@xxxxxxxxx>
- Re: [PATCH] MAKEALL: make it generic
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] MAKEALL: make it generic
- From: Mike Frysinger <vapier.adi@xxxxxxxxx>
- [PATCH] MAKEALL: make it generic
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: The i.MX27 has no second leve cache, remove include file
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] The i.MX27 has no second level cache, remove include file (Subject fixed)
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: The i.MX27 has no second leve cache, remove include file
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] Fix watchdog's register size for the i.MX27 CPU
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] Fix watchdog's register size for the i.MX27 CPU
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- The i.MX27 has no second leve cache, remove include file
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] Fix watchdog's register size for the i.MX27 CPU
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/3] imx-ipu-fb: set default bits per pixel at 16 for mx3
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/3] imx/fb: struct imx_ipu_fb_platform_data remove const for mode
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/3] pcm038: fix initialization makes pointer from integer without a cast
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32
- From: Andre <armccurdy@xxxxxxxxx>
- Re: [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 1/2] device: introduce resource structure to simplify resource delaration
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 1/2] device: introduce resource structure to simplify resource delaration
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/2] device: introduce resource structure to simplify resource delaration
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/2] ram device: use resource structure instead of memory_platform_data
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/3] blackfin: remove duplicated PAGE_SIZE define
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/3] ipe337: fix default env
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/3] mk68: rename macro __M68K__ to __m68k__ as it's prodive by gcc
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32
- From: Andre <armccurdy@xxxxxxxxx>
- [PATCH 1/2] netconsole: remove non-needed setbaudrate
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/2] console: set device_d id at -1
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/3 v2] Replace direct header access with the API routines
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/3 v2] image: factorise image printing contents
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/3 v2] host: introduce compiler.h to handle host include
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] commands/crc32: add compare 2 files crc
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/5] image: Replace direct header access with the API routines
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/5] image: rename IH_CPU to IH_ARCH to be more concistant
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/5] image: factorise string helper
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/5] host: introduce compiler.h to handle host include
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 5/5] image: factorise image printing contents
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH 2/2] image: rename IH_CPU to IH_ARCH to be more concistant
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/2] image: factorise string helper
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] commands/crc32: add compare 2 files crc
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH] commands/crc32: add compare 2 files crc
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] commands/crc32: add compare 2 files crc
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] commands/crc32: add compare 2 files crc
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] commands/crc32: add compare 2 files crc
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH] commands/crc32: add compare 2 files crc
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] commands/crc32: add compare 2 files crc
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] nhk8815: rename nand parts uboot as barebox
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/2 v2] nhk8815: update defconfig
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] commands/crc32: add compare 2 files crc
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] nhk8815: update defconfig
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] arm: allow to overwrite the system_rev via bootm
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] arm: allow to overwrite the system_rev via bootm
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/2] sha1: use unit32_t and uint8_t
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: dm9601 USB Network Controller
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: dm9601 USB Network Controller
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: dm9601 USB Network Controller
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- dm9601 USB Network Controller
- From: Nataraj S Narayan <natarajsn@xxxxxxxxx>
- Re: Using barebox to replace u-boot on OMAPs
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- Using barebox to replace u-boot on OMAPs
- From: Anand Gadiyar <gadiyar@xxxxxxxxx>
- [PATCH 3/3 v2] Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/3] at91: add HAVE_NAND_ATMEL_BUSWIDTH_16 to Enable 16-bit data bus interface
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/3] Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/3] at91sam9263: move MACH_HAS_LOWLEVEL_INIT to board
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] driver: use id as -1 for auto assigned id
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: Mentor Inventra USB Contoller driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] driver: allow register device with specific id
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 3/4] amba-pl011: probe fail if we can get the clock
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 1/4] driver: allow register device with specific id
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 3/4] amba-pl011: probe fail if we can get the clock
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 3/4] amba-pl011: probe fail if we can get the clock
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] driver: allow register device with specific id
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/3 v3] Menu: add box style entry
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/3 v3] menu: add auto select support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/3 v3] menu: shell fix do_menu_select
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 1/4] driver: allow register device with specific id
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/1] Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: changes for reducing DDR size
- From: kuldeep ghan <ghankp@xxxxxxxxx>
- PULL request fix and sh-prepare and Digest and login/password Frameworks
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 2/7] add md5 support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/5] arm: move mach-types.h to include/generated/
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/5] move utsrelease.h to include/generated/ instead of include/linux
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/5] move version.h to include/generated/ instead of include/linux
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 5/5] move barebox_default_env.h to include/generated/
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/5] gitignore: update generated link and file
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- dos file support.
- From: James Robinson <jmrobinson3@xxxxxxxxxxx>
- Re: [PATCH V2] Menu: add box style entry
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 3/7] add sha1 support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 2/2] menu: add auto select support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 3/7] add sha1 support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/7] add md5 support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] menu: add auto select support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH V2] Menu: add box style entry
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH V2] Menu: add box style entry
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] init: introduce __BARE_INIT for .section ".text_bare_init.text"
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] init: introduce __BARE_INIT for .section ".text_bare_init.text"
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH V2] Menu: add box style entry
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/9 V2] preperation for sh adding
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] configs: use new savedefconfig format as in linux
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 1/3] poller: add poller support
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] poller: add poller support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/3] clock: add poller call to is_timeout()
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 3/3] unlzo: add poller call to unlzo routine
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 0/3] add generic polling infrastructure
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 1/3] poller: add poller support
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: WATCHDOG question
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- WATCHDOG question
- From: James Robinson <jmrobinson3@xxxxxxxxxxx>
- [PATCH 1/2] i2c rename CONFIG_DRIVER_I2C_xx to CONFIG_I2C_xx
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/2] i2c: move busses to drivers/i2c/busses
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 3/4] amba-pl011: probe fail if we can get the clock
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH v2] init: introduce __BARE_INIT for .section ".text_bare_init.text"
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/4] driver: allow register device with specific id
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/4] device: fix dev_name
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/4] amba-pl011: probe fail if we can get the clock
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/4] stm8815: fix the uart device clock match
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: storing barebox to flash /dev/nand0
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: storing barebox to flash /dev/nand0
- From: Robert Schwebel <robert@xxxxxxxxxxxxxxxx>
- Re: storing barebox to flash /dev/nand0
- From: Abdoulaye Walsimou Gaye <awg@xxxxxxxxxxxxxx>
- Re: storing barebox to flash /dev/nand0
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: storing barebox to flash /dev/nand0
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: storing barebox to flash /dev/nand0
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: storing barebox to flash /dev/nand0
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: storing barebox to flash /dev/nand0
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: storing barebox to flash /dev/nand0
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: storing barebox to flash /dev/nand0
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: storing barebox to flash /dev/nand0
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: storing barebox to flash /dev/nand0
- From: Abdoulaye Walsimou Gaye <awg@xxxxxxxxxxxxxx>
- storing barebox to flash /dev/nand0
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [PATCH 0/7] Digest and login/password Frameworks
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/7] add sha1 support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 5/7] add password framework
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 6/7] add passwd command
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/7] add sha256 support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 7/7] add login support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/7] add digest framework
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/7] add md5 support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 0/7] Digest and login/password Frameworks
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: Generating barebox.S
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Generating barebox.S
- From: Teresa Gamez <T.Gamez@xxxxxxxxx>
- Mentor Inventra USB Contoller driver
- From: Gaurav Singh <gausinghnsit@xxxxxxxxx>
- Re: [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.
- From: Marek Belisko <marek.belisko@xxxxxxxxxxxxxxx>
- Re: a9m2440_defconfig failed to compile
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: a9m2440_defconfig failed to compile
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: a9m2440_defconfig failed to compile
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- a9m2440_defconfig failed to compile
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [PATCH v3] Menu: add box style entry
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH v3] Menu: add box style entry
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH V2] Menu: add box style entry
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/2 v2] menu: add auto select support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/2] menu: shell fix do_menu_select
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/2] menu: add auto select support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] init: introduce __BARE_INIT for .section ".text_bare_init.text"
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- [PATCH 0/18] add sh support and st40 primarly support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] init: introduce __BARE_INIT for .section ".text_bare_init.text"
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH V2] Menu: add box style entry
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] Menu: add box stype entry
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 5/9 V2] vsprintf: add %w and %w support to print unit
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 9/9 V2] clkdev: add print clk info command
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 6/9 V2] at91/clock: switch to %w for clock info printing
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/9 V2] types.h: move __kernel_dev_t to include/linux/types.h
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/9 V2] stm8815: fix the uart device clock match
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 7/9 V2] cfi_flash: use %W and IEEE 1541 format
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/9 V2] device: fix dev_name
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 8/9 V2] use %W instead of size_human_readable and use IEEE 1541 format
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 5/9 V2] vsprintf: add %w and %w support to print unit
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/9 V2] arm: move clkdev to drivers/clk
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 0/9 V2] preperation for sh adding
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 5/9] vsprintf: add %w and %w support to print unit
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 5/9] vsprintf: add %w and %w support to print unit
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 5/9] vsprintf: add %w and %w support to print unit
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 5/9] vsprintf: add %w and %w support to print unit
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 9/9] clkdev: add print clk info command
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 0/9] preperation for sh adding
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/9] types.h: move __kernel_dev_t to include/linux/types.h
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/9] stm8815: fix the uart device clock match
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/9] arm: move clkdev to drivers/clk
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 8/9] use %W instead of size_human_readable and use IEEE 1541 format
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 5/9] vsprintf: add %w and %w support to print unit
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/9] device: fix dev_name
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 7/9] cfi_flash: use %W and IEEE 1541 format
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 9/9] clkdev: add print clk info command
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 6/9] at91/clock: switch to %w for clock info printing
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: barebox: write a file to /dev/ubi0
- From: Baruch Siach <baruch@xxxxxxxxxx>
- barebox: write a file to /dev/ubi0
- From: Nataraj S Narayan <natarajsn@xxxxxxxxx>
- Re: barebox on x86
- From: Stefan Reinauer <stefan.reinauer@xxxxxxxxxxxxxx>
- Re: barebox on x86
- From: Stefan Reinauer <stepan@xxxxxxxxxxxxxx>
- Re: barebox on x86
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: barebox on x86
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: barebox on x86
- From: Stefan Reinauer <stepan@xxxxxxxxxxxxxx>
- Re: barebox on x86
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: barebox on x86
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] i2c: fix wrong comment and symbol export for i2c_add_numbered_adapter()
- From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
- Re: barebox on x86
- From: Stefan Reinauer <stepan@xxxxxxxxxxxxxx>
- Re: barebox on x86
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- barebox on x86
- From: Stefan Reinauer <stefan.reinauer@xxxxxxxxxxxxxx>
- barebox :i2c error
- From: Nataraj S Narayan <natarajsn@xxxxxxxxx>
- Applications
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: barebox as first stage bootloader
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- barebox as first stage bootloader
- From: Nataraj S Narayan <natarajsn@xxxxxxxxx>
- v2010.09.0
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2 v2] stm8815: fix the uart device clock match
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 2/2] stm8815: fix the uart device clock match
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 2/2] stm8815: fix the uart device clock match
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 1/2] device: fix dev_name
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/2] stm8815: fix the uart device clock match
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH V3] initcall: add postconsole_initcall
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] at91: remove non-needed include of autoconf.h
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH V2] initcall: add postconsole_initcall
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] move include/unaligned to include/linux/unaligned/
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] add WARN_ON and WARN support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] module: move EXPORT_SYMBOL_GPL define to module.h
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: Barebox: Nand flash
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Barebox: Nand flash
- From: Nataraj S Narayan <natarajsn@xxxxxxxxx>
- [PATCH] types.h: move _kernel_dev_t to include/linux/types.h
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: barebox:Nand flash issue
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: barebox:Nand flash issue
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Barebox: unprotect dataflash
- From: Nataraj S Narayan <natarajsn@xxxxxxxxx>
- barebox:Nand flash issue
- From: Nataraj S Narayan <natarajsn@xxxxxxxxx>
- Re: barebox:Nand flash issue
- From: Nataraj S Narayan <natarajsn@xxxxxxxxx>
- Re: [PATCH 1/2] udpate fixdep.c to linux kernel v2.6.36-rc1-168-ge36c886
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 1/2] udpate fixdep.c to linux kernel v2.6.36-rc1-168-ge36c886
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 4/4 v2] use resource_size_t for device resources
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 4/4] use resource_size_t for device ressoruces
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/2] Makefile: fix autoconf.h location
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/2] udpate fixdep.c to linux kernel v2.6.36-rc1-168-ge36c886
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 4/4] use resource_size_t for device ressoruces
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 3/4] introduce phys_addr_t and resource_size_t
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/4] introduce pure_initcall
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/4] use resource_size_t for device ressoruces
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/4] xfuncs.h: include linux/types.h to avoid non decleration of size_t
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH V2] net: rework the mii support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] net: rework the mii support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 9/9] menu: simplify usage for clients
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: barebox and setenv
- From: Nataraj S Narayan <natarajsn@xxxxxxxxx>
- Re: barebox and setenv
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: barebox and setenv
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: barebox and setenv
- From: Nataraj S Narayan <natarajsn@xxxxxxxxx>
- barebox and setenv
- From: Nataraj S Narayan <natarajsn@xxxxxxxxx>
- broken quoting
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 3/3] defaultenv: create /dev/ram0.kernel at offset 8M
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 0/3] fix defaultenv
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 2/3] defaultenv: fix adding of nand_parts
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 1/3] defaultenv: fix physmap-flash device name
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- barebox: saveenv issue
- From: Nataraj S Narayan <natarajsn@xxxxxxxxx>
- Re: [PATCH 9/9] menu: simplify usage for clients
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 9/9] menu: simplify usage for clients
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 7/9] menu: fix memory corruption
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 7/9] menu: fix memory corruption
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: changes for reducing DDR size
- From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
- Re: YAFFS
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 5/9] menu: use list_for_each_entry where appropriate
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 9/9] menu: simplify usage for clients
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/9] menu: Use strdup instead of malloc/strncpy
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 8/9] menu: do not go to free if there's nothing to free
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 4/9] menu: remove superfluous struct menu_entry member from struct menu
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/9] menu: simplify menu_free with list_for_each_entry_safe
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/9] menu: initialize entries list in menu_alloc
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 6/9] menu: use an initialized struct list as menu list
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Update patches for menu framework
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 7/9] menu: fix memory corruption
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: changes for reducing DDR size
- From: kuldeep ghan <ghankp@xxxxxxxxx>
- barebox and YAFFS
- From: Nataraj S Narayan <natarajsn@xxxxxxxxx>
- YAFFS
- From: Nataraj S Narayan <natarajsn@xxxxxxxxx>
- [PATCH 5/5] at91: remove non used and obsolete at91rm9200 code
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/5] macb: introduce HAS_MACB configuration
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/5] at91: rename clocksource.c -> at91sam926x_time.c
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/5] mmccpu: fix typo in AT91_MAIN_CLOCK
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/5] dm9000: allow to specify that no srom is present
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 0/5] AT91 fix and preparation for at91rm9200 readding and at91sam9261
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Peter Korsgaard <jacmet@xxxxxxxxxx>
- [PATCH] move board.dox to Documentation and update it
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- [PATCH v2] Kconfig: sync with linux kernel v2.6.36-rc1-168-ge36c886
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/2 v2] Add Menu Framework
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/2] Menu/cmd: add sub menu entry command support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Add Menu Framework
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Add Menu Framework
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: [PATCH] Add Menu Framework
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Add Menu Framework
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Add Menu Framework
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 2/6] at91: Introduction of at91sam9261 SOC.
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 1/2] misc: introduce string_to_bin
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH] Add Menu Framework
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/6] at91: Introduction of at91sam9261 SOC.
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] misc: introduce string_to_bin
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 1/6 v2] dm9000: allow to specify that no srom is present
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/6 v2] dm9000: allow to specify that no srom is present
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 1/6] dm9000: allow to specify that no srom is present
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] Add Menu Framework
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] commands: partition.c fix file mod bits
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] mmccpu: fix typo in AT91_MAIN_CLOCK
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 6/6] at91: remove non used and obsolete at91rm9200 code
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/6] at91: Introduction of at91sam9261 SOC.
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/6] at91: rename clocksource.c -> at91sam926x_time.c
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/6] at91: add Ronetix pm9261 board support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 5/6] macb: introduce HAS_MACB configuration
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/6] dm9000: allow to specify that no srom is present
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 0/6] AT91 fies and new soc & board
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH|RFC] beagle: make nand ecc command based
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- Re: [PATCH|RFC] beagle: make nand ecc command based
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] setser: new command to set serial number on ARM
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 2/2] at91rm9200: delete choice without type
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] omap3: add arch specific dcache flush
- From: Nishanth Menon <nm@xxxxxx>
- Re: fsl-udc (USB gadget) anyone?
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: omap3: omap3530_beagle_per_uart_defconfig broken
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH|RFC] beagle: make nand ecc command based
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- Re: omap3: omap3530_beagle_per_uart_defconfig broken
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- Re: [PATCH] beagle: fix usb dependencies
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- [PATCH|RFC] beagle: make nand ecc command based
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH] omap: nand remove unnecessary condition
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 0/2] small build fixes
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 2/2] at91rm9200: delete choice without type
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 1/2] armlinux: bugfix add parameter name into inline function
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH] beagle: defconfig cleanup for v2010.08.0
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH] beagle: fix usb dependencies
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH] iim/imx25: fix MAC and UID offsets
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH v3] imx iim: add mac address support
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH v2 3/6] imx iim: add mac address support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: omap3: omap3530_beagle_per_uart_defconfig broken
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: omap3: omap3530_beagle_per_uart_defconfig broken
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- omap3: omap3530_beagle_per_uart_defconfig broken
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- [PATCH v2 2/6] imx: driver for the IIM fusebox
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH v2 1/6] imx: move IIM registers to their own header
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH v2 3/6] imx iim: add mac address support
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH v2 0/6] imx: support for the IIM fusebox
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH v2 6/6] fec_imx: add support for IIM stored mac address
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH v2 5/6] imx25: add iim platform code
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH v2 4/6] imx25: add chip specific IIM fusebox defines
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: changes for reducing DDR size
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 5/5] fec: add support for IIM stored mac address
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 5/5] fec: add support for IIM stored mac address
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 0/5] imx: support for the IIM fusebox
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 5/5] fec: add support for IIM stored mac address
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/5] imx: support for the IIM fusebox
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: fsl-udc (USB gadget) anyone?
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: fsl-udc (USB gadget) anyone?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- fsl-udc (USB gadget) anyone?
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 2/5] imx: driver for the IIM fusebox
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 4/5] imx25 3ds: add support for the iim fusebox driver
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 3/5] imx25: add chip specific IIM fusebox defines
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 5/5] fec: add support for IIM stored mac address
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 1/5] imx: move IIM registers to their own header
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 0/5] imx: support for the IIM fusebox
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- changes for reducing DDR size
- From: kuldeep ghan <ghankp@xxxxxxxxx>
- Barebox changes for reducing DDR size
- From: kuldeep ghan <ghankp@xxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] cmd: add fuse_blow/fuse_sense for the i.MX IIM fusebox
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] cmd: add fuse_blow/fuse_sense for the i.MX IIM fusebox
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH v2 1/2] cmd: add fuse_blow/fuse_sense for the i.MX IIM fusebox
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v2 2/2] fec: add support for IIM stored mac address
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH v2 1/2] cmd: add fuse_blow/fuse_sense for the i.MX IIM fusebox
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 1/2] cmd: add fuse_blow/fuse_sense for the i.MX IIM fusebox
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH] cp: fix help text
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH|RFC] loadb: get console baudrate from class_dev not dev
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH] cp: fix help text
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 1/2] cmd: add fuse_blow/fuse_sense for the i.MX IIM fusebox
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/2] cmd: add fuse_blow/fuse_sense for the i.MX IIM fusebox
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 2/2] fec: add support for IIM stored mac address
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- [PATCH] Kconfig: sync with linux kernel v2.6.35-4771-g1787985
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] net: rework the mii support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] omap nand: bugfix configure ecc order
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] misc: introduce string_to_bin
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 1/2] misc: introduce string_to_bin
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 1/2] misc: introduce string_to_bin
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 1/2] misc: introduce string_to_bin
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/2] setser: new command to set serial number on ARM
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH 1/2] misc: introduce string_to_bin
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 3/6] amba: add pl011
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] mw: fix help text
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 0/3] arm/imx: serial number / UID support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] init.h: introduce fake define (__init & __initdata) to simplify the linux sync
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 03/13] add twl4030 support
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 01/13] i2c: Add missing defines for omap
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 11/13] ehci: add omap support
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 00/13] OMAP/Beagleboard ehci support
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 02/13] arm omap: Add I2C driver
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 04/13] arm omap: Add gpio support
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 10/13] usb: add twl4030 phy support
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 08/13] ehci: set CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS to 16
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 13/13] add beagle board defconfig
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 12/13] beagle: add usb support
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 05/13] arm omap: Add cpu_is_ macros
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 07/13] ehci: Make has_tt configurable via platform data
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 09/13] ehci: add remove function
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 06/13] beagle: Add missing pinmux for usb
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH] beagle: add bootparams and architecture
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH] md: fix help text
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH] cfi_flash_intel: support 1024b buffer write
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] imx25: fix UID endianess
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH] cfi_flash_intel: support 1024b buffer write
- From: Eric Bénard <eric@xxxxxxxxxx>
- Re: [PATCH] cfi_flash_intel: support 1024b buffer write
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] init.h: introduce fake define (__init & __initdata) to simplify the linux sync
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 0/3] arm/imx: serial number / UID support
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 3/6] amba: add pl011
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] gitignore: ignore .orig and .patch files
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH] stddef: introduce true/false enum
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/3 v3] at91: implement clock framework
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 3/3 v2] at91: implement clock framework
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 3/3 v2] at91: implement clock framework
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH] init.h: introduce fake define (__init & __initdata) to simplify the linux sync
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 5/6] nand: driver for Nomadik 8815 SoC
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 6/6] arm: add nhk8815 board support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 4/6] arm: add Nomadik 8815 SoC support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/6] string: add strlcpy support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/6] arm: add common clkdev
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/6] amba: add pl011
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 0/6] common arm clkdev
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 3/3 v2] at91: implement clock framework
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 3/3] at91: implement clock framework
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] omap clock: bugfix remove silicon offset sil_index
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH] beagle: add missing nand headerfile
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 3/3] at91: implement clock framework
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 1/3] initcall: add postconsole_initcall
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 2/3] clock: Introduce clock framework from Linux
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH 0/3] introduce clk framework
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- v2010.08.0
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] arm: add support for the serial ATAG
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 0/3] arm/imx: serial number / UID support
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
[Index of Archives]
[Linux Embedded]
[Linux USB Devel]
[Video for Linux]
[Linux SCSI]
[Samba]
[Yosemite News]