Hi, On Fri, Sep 10, 2010 at 11:19 AM, Abdoulaye Walsimou Gaye <awg@xxxxxxxxxxxxxx> wrote: > On 09/10/2010 11:01 AM, Belisko Marek wrote: >> Hi, >> >> I'm porting barebox to mini2440 board. > > Good news, I have this board and use a fork of u-boot from > http://repo.or.cz/w/u-boot-openmoko/mini2440.git > which is not maintained any more and it is not in mainline u-boot. Better news ;) I have a fork of barebox with basic support : http://repo.or.cz/w/barebox-mini2440.git I have some patches locally which are not in repo. I plan to push mini2440 to mainline. > >> I can boot barebox from SDRAM >> by loading to TEXT_BASE address. >> I would like to test also booting from NAND flash but I can't find a >> way how to store barebox loaded in RAM >> to flash. >> >> I try tftp barebox.bin /dev/nand0 but if failed with: >> >> TFTP from server 10.146.1.21 ('barebox.bin' -> '/dev/nand0') >> offset 0x00000200 not page aligned >> write: Invalid argument >> >> tftp failed: error -22 >> >> How can I properly store to flash? >> >> > > I am not familiar with barebox (I discovered it recently), but you seem > to wrongly > create your nand image (think page size, eraze block size, etc...) > >> Thank's in advance, >> >> Marek >> >> > > Best regards, > AWG > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > good luck, Marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite icq: 290551086 web: http://open-nandra.com _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
