On 09/10/2010 11:01 AM, Belisko Marek wrote: > Hi, > > I'm porting barebox to mini2440 board. Good news, I have this board and use a fork of u-boot from http://repo.or.cz/w/u-boot-openmoko/mini2440.git which is not maintained any more and it is not in mainline u-boot. > I can boot barebox from SDRAM > by loading to TEXT_BASE address. > I would like to test also booting from NAND flash but I can't find a > way how to store barebox loaded in RAM > to flash. > > I try tftp barebox.bin /dev/nand0 but if failed with: > > TFTP from server 10.146.1.21 ('barebox.bin' -> '/dev/nand0') > offset 0x00000200 not page aligned > write: Invalid argument > > tftp failed: error -22 > > How can I properly store to flash? > > I am not familiar with barebox (I discovered it recently), but you seem to wrongly create your nand image (think page size, eraze block size, etc...) > Thank's in advance, > > Marek > > Best regards, AWG _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
