On 08/17/2010 03:40 AM, Michael Grzeschik wrote:
Signed-off-by: Michael Grzeschik<m.grzeschik@xxxxxxxxxxxxxx>
Acked-by: Nishanth Menon <nm@xxxxxx>
---
arch/arm/boards/omap/Kconfig | 2 --
arch/arm/boards/omap/board-beagle.c | 4 ++++
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boards/omap/Kconfig b/arch/arm/boards/omap/Kconfig
index 6012227..d612064 100644
--- a/arch/arm/boards/omap/Kconfig
+++ b/arch/arm/boards/omap/Kconfig
@@ -48,8 +48,6 @@ config MACH_BEAGLE
select MACH_HAS_LOWLEVEL_INIT
select OMAP_CLOCK_ALL
select HAS_OMAP_NAND
- select USB_EHCI_OMAP
- select USB_TWL4030
help
Say Y here if you are using Beagle Board
diff --git a/arch/arm/boards/omap/board-beagle.c b/arch/arm/boards/omap/board-beagle.c
index c0b6b43..e9d3072 100644
--- a/arch/arm/boards/omap/board-beagle.c
+++ b/arch/arm/boards/omap/board-beagle.c
@@ -273,6 +273,7 @@ static struct device_d sdram_dev = {
.platform_data =&sram_pdata,
};
+#ifdef CONFIG_USB_EHCI_OMAP
static struct omap_hcd omap_ehci_pdata = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
@@ -295,6 +296,7 @@ static struct device_d usbh_dev = {
.size = 4 * 1024,
.platform_data =&ehci_pdata,
};
+#endif /* CONFIG_USB_EHCI_OMAP */
static struct device_d i2c_dev = {
.name = "i2c-omap",
@@ -318,8 +320,10 @@ static int beagle_devices_init(void)
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
register_device(&i2c_dev);
+#ifdef CONFIG_USB_EHCI_OMAP
if (ehci_omap_init(&omap_ehci_pdata)>= 0)
register_device(&usbh_dev);
+#endif /* CONFIG_USB_EHCI_OMAP */
#ifdef CONFIG_GPMC
/* WP is made high and WAIT1 active Low */
gpmc_generic_init(0x10);
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
