On 08:52 Thu 19 Aug , Sascha Hauer wrote: > On Thu, Aug 19, 2010 at 04:48:26AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote: > > AT91sam9261 series is an ARM 926ej-s SOC family clocked at 190/100MHz. > > > > The first board that embeds at91sam9261 chip is the AT91SAM9261-EK. > > http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820 > > > > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx> > > --- > > arch/arm/Makefile | 1 + > > arch/arm/boards/at91sam9261ek/Makefile | 1 + > > arch/arm/boards/at91sam9261ek/config.h | 110 +++++++++ > > arch/arm/boards/at91sam9261ek/env/bin/_update | 36 +++ > > arch/arm/boards/at91sam9261ek/env/bin/boot | 47 ++++ > > arch/arm/boards/at91sam9261ek/env/bin/hush_hack | 1 + > > arch/arm/boards/at91sam9261ek/env/bin/init | 38 +++ > > .../at91sam9261ek/env/bin/update_barebox_xmodem | 26 ++ > > .../arm/boards/at91sam9261ek/env/bin/update_kernel | 15 ++ > > arch/arm/boards/at91sam9261ek/env/bin/update_root | 16 ++ > > arch/arm/boards/at91sam9261ek/env/config | 28 +++ > > Care to use the generic environment? What's missing in it for you to use > it? miss it in the code > > > arch/arm/boards/at91sam9261ek/init.c | 170 ++++++++++++++ > > arch/arm/configs/at91sam9261ek_defconfig | 242 ++++++++++++++++++++ > > arch/arm/mach-at91/Kconfig | 23 ++ > > arch/arm/mach-at91/Makefile | 1 + > > arch/arm/mach-at91/at91sam9261.c | 230 +++++++++++++++++++ > > arch/arm/mach-at91/at91sam9261_devices.c | 169 ++++++++++++++ > > arch/arm/mach-at91/include/mach/at91sam9261.h | 109 +++++++++ > > Can you please make two patches out of this? One for the architecture > support and another one for the board support. Personnaly I prefer to add the first board at the same as e do for the kernel otherwise ok Best Regards, J. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
