From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> --- arch/arm/boards/omap/board-beagle.c | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-) diff --git a/arch/arm/boards/omap/board-beagle.c b/arch/arm/boards/omap/board-beagle.c index 5daad86..01c6cd2 100644 --- a/arch/arm/boards/omap/board-beagle.c +++ b/arch/arm/boards/omap/board-beagle.c @@ -189,6 +189,20 @@ static void mux_config(void) MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)); /* I2C1_SCL default mux mode is mode0 */ /* I2C1_SDA default mux mode is mode0 */ + /* USB EHCI (port 2) */ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTU | DIS | M3)); + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTU | DIS | M3)); + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTU | DIS | M3)); + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTU | DIS | M3)); + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTU | DIS | M3)); + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTU | DIS | M3)); + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | DIS | M3)); + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)); + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M3)); + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | DIS | M3)); + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | DIS | M3)); + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | DIS | M3)); + MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147*/; } /** -- 1.7.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
