This patch series adds a driver for the IIM fusebox. As suggested by Sascha Hauer, this driver is implemented as a character device, which allows use of the standard md/mw commands to access the fuses. Patches 3 and 6 also add to the fec_imx NIC driver the ability to fetch the MAC address from the IIM fusebox. Changes from v1: * Put the imx_iim platform code in the imx25 code instead of the board code. This avoids code duplication in each board. * Move the MAC address fetch code into the imx_iim driver, and use platform data to pass the MAC address fusebox offset. This avoids ugly ifdefs in the fec_imx driver. Baruch Siach (6): imx: move IIM registers to their own header imx: driver for the IIM fusebox imx iim: add mac address support imx25: add chip specific IIM fusebox defines imx25: add iim platform code fec_imx: add support for IIM stored mac address arch/arm/mach-imx/Kconfig | 18 ++ arch/arm/mach-imx/Makefile | 1 + arch/arm/mach-imx/iim.c | 311 +++++++++++++++++++++++++++ arch/arm/mach-imx/imx25.c | 44 ++++ arch/arm/mach-imx/imx35.c | 1 + arch/arm/mach-imx/include/mach/iim.h | 55 +++++ arch/arm/mach-imx/include/mach/imx25-regs.h | 8 +- arch/arm/mach-imx/include/mach/imx35-regs.h | 18 -- drivers/net/fec_imx.c | 4 +- 9 files changed, 439 insertions(+), 21 deletions(-) create mode 100644 arch/arm/mach-imx/iim.c create mode 100644 arch/arm/mach-imx/include/mach/iim.h _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
