On 20:52 Tue 07 Sep , Marek Belisko wrote: > Following steps lead to compilation error (barebox v2010.09.0): > > 1. make a9m2440_defconfig (or a9m2410) ARCH=arm > 2. make CROSS_COMPILE=arm-linux- ARCH=arm > > This patch should fix problems. > > Signed-off-by: Marek Belisko <marek.belisko@xxxxxxxxxxxxxxx> > --- > arch/arm/mach-s3c24xx/Kconfig | 4 +++- > 1 files changed, 3 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig > index 37ccf2f..297fdbb 100644 > --- a/arch/arm/mach-s3c24xx/Kconfig > +++ b/arch/arm/mach-s3c24xx/Kconfig > @@ -81,7 +81,9 @@ config S3C24XX_SDRAM_INIT > config S3C24XX_NAND_BOOT > bool > prompt "Booting from NAND" > - select NAND_S3C24X0 > + select MTD > + select NAND > + select NAND_S3C24X0 you should be able to boot from nand only if you enable the NAND and not the invert so it's a depends on Best Regards, J. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
