Jean-Christophe PLAGNIOL-VILLARD wrote: > On 20:52 Tue 07 Sep , Marek Belisko wrote: > > Following steps lead to compilation error (barebox v2010.09.0): > > > > 1. make a9m2440_defconfig (or a9m2410) ARCH=arm > > 2. make CROSS_COMPILE=arm-linux- ARCH=arm > > > > This patch should fix problems. > > > > Signed-off-by: Marek Belisko <marek.belisko@xxxxxxxxxxxxxxx> > > --- > > arch/arm/mach-s3c24xx/Kconfig | 4 +++- > > 1 files changed, 3 insertions(+), 1 deletions(-) > > > > diff --git a/arch/arm/mach-s3c24xx/Kconfig > > b/arch/arm/mach-s3c24xx/Kconfig index 37ccf2f..297fdbb 100644 > > --- a/arch/arm/mach-s3c24xx/Kconfig > > +++ b/arch/arm/mach-s3c24xx/Kconfig > > @@ -81,7 +81,9 @@ config S3C24XX_SDRAM_INIT > > config S3C24XX_NAND_BOOT > > bool > > prompt "Booting from NAND" > > - select NAND_S3C24X0 > > + select MTD > > + select NAND > > + select NAND_S3C24X0 > > you should be able to boot from nand only if you enable the NAND and not > the invert Hmm, you can enable NAND support, but you may do not want to boot from it. IMHO its correct in this way. jbe -- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | Phone: +49-8766-939 228 | Vertretung Sued/Muenchen, Germany | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de/ | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
