Hi Marek, On Fri, Jun 25, 2010 at 11:31:49AM +0200, Belisko Marek wrote: > Hi, > > I have a calao board sbc35-a9260 with u-boot pre-installed on it. > I would like to try barebox running on that board (also make some development). > I build at91sam9260ek_defconfig to try it out. I became to situation > that I don't know how to load image to board :) > > I try via tftp but u-boot automatically try to boot it and I got some > error about magic number. > I think about possibility just download binary to some RAM address and > then use go command in u-boot > to test if barebox binary will work. > > There exist some how-to or example how to do this? It's perfectly fine to start barebox from U-Boot with the 'go' command. Try 'setenv autostart no' in U-Boot to stop U-Boot from autostarting images. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
