Hi All, I’m not having much luck booting a kernel on the mx35 3stack! Nothing happens after “done, booting the kernel” (boot snippet at end of email) Barebox and the kernel are in the NOR flash. I’ve successfully booted the exact uImage using u-boot v1, so I’m fairly confident it’s OK. Any suggestions of what could be wrong? The machine arch # is correct. The tagged list looks correct (gdb mem dump just before calling theKernel()). Guessing something is not being inited as required. Or I’ve done something silly. I assume other people have booted successfully on this board. (Any known working kernel images would be great to test against!) Hints greatly appreciated. Cheers, Marc ---boot log, as far as it gets: barebox:/ boot Verifying Checksum ... OK Image Name: Angstrom/2.6.31/mx35pdk Created: 2010-04-14 0:24:42 UTC Data Size: 2216628 Bytes = 2.1 MB Load Address: 80008000 Entry Point: 80008000 OK commandline: console=ttymxc0,115200 video=mx3fb:CTP-CLAA070LC0ACW ip=:::::: root =/dev/mtdblock7 rootfstype=jffs2 mtdparts=\"physmap-flash.0:256k(barebox)ro,512k (bareboxenv),3M(kernel),-(root);mxc_nand:256k(barebox)ro,512k(bareboxenv),2M(ker nel),-(root)\" arch_number: 1645 Starting kernel ... Uncompressing Linux............................................................. ................................................................................ ..... done, booting the kernel. |
_______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
