Linux for MIPS

• Thread Index

• Is r25 saved across syscalls?
  • From: Rich Felker <dalias@xxxxxxxxxx>
• Re: [PATCH v3 2/3] bcma: add GPIO driver for SoCs
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: MIPS: Fix build error with modern GCC for non-Cavium.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• [PATCH] MIPS: ath79: fix CPU/DDR frequency calculation for SRIF PLLs
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH] mips/octeon: 16-Bit NOR flash was not being detected during boot
  • From: Charles Hardin <ckhardin@xxxxxxxxxxx>
• Re: [PATCH] mips/octeon: 16-Bit NOR flash was not being detected during boot
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH] mips/octeon: 16-Bit NOR flash was not being detected during boot
  • From: Charles Hardin <ckhardin@xxxxxxxxxxx>
• Re: [PATCH] clk: add Loongson1B clock support
  • From: "Turquette, Mike" <mturquette@xxxxxx>
• [PATCH V5 3/3] MIPS: make funcs preempt-safe for non-mipsr2 cpus
  • From: "Jim Quinlan" <jim2101024@xxxxxxxxx>
• [PATCH V5 2/3] MIPS: Remove irqflags.h dependency from bitops.h
  • From: "Jim Quinlan" <jim2101024@xxxxxxxxx>
• [PATCH V5 0/3] Make funcs preempt safe for non-mipsr2 cpus
  • From: "Jim Quinlan" <jim2101024@xxxxxxxxx>
• [PATCH V5 1/3] MIPS: bitops.h: change use of 'unsigned short' to 'int'
  • From: "Jim Quinlan" <jim2101024@xxxxxxxxx>
• Warning of gcc bugs affecting kernel builds
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V4 0/3] MIPS: make funcs preempt-safe for non-mipsr2 cpus
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 1/4] MIPS: Add base architecture support for RI and XI.
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V4 3/3] MIPS: make funcs preempt-safe for non-mipsr2 cpus
  • From: "Jim Quinlan" <jim2101024@xxxxxxxxx>
• [PATCH V4 0/3] MIPS: make funcs preempt-safe for non-mipsr2 cpus
  • From: "Jim Quinlan" <jim2101024@xxxxxxxxx>
• [PATCH V4 2/3] MIPS: Remove irqflags.h dependency from bitops.h
  • From: "Jim Quinlan" <jim2101024@xxxxxxxxx>
• [PATCH V4 1/3] MIPS: bitops.h: change use of 'unsigned short' to 'int'
  • From: "Jim Quinlan" <jim2101024@xxxxxxxxx>
• Re: [PATCH 1/4] MIPS: Add base architecture support for RI and XI.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 4/4] MIPS: Remove kernel_uses_smartmips_rixi macro definition.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 3/4] MIPS: Remove kernel_uses_smartmips_rixi from page table bits.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 2/4] MIPS: Remove kernel_uses_smartmips_rixi use from arch/mips/mm.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 1/4] MIPS: Add base architecture support for RI and XI.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 4/4] MIPS: Remove kernel_uses_smartmips_rixi macro definition.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 3/4] MIPS: Remove kernel_uses_smartmips_rixi from page table bits.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 2/4] MIPS: Remove kernel_uses_smartmips_rixi use from arch/mips/mm.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 1/4] MIPS: Add base architecture support for RI and XI.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 0/4] Add RI and XI bits to MIPS base architecture.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: [PATCH] clk: Make the generic clock API available by default
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 2/2] MIPS: make funcs preempt-safe for non-mipsr2 cpus
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH V3 1/2] MIPS: Remove irqflags.h dependency from bitops.h
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH V3 1/2] MIPS: Remove irqflags.h dependency from bitops.h
  • From: "Jim Quinlan" <jim2101024@xxxxxxxxx>
• [PATCH V3 2/2] MIPS: make funcs preempt-safe for non-mipsr2 cpus
  • From: "Jim Quinlan" <jim2101024@xxxxxxxxx>
• Re: [PATCH v3 2/3] bcma: add GPIO driver for SoCs
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH 0/3] MIPS: JZ4740: Move PWM driver to PWM framework
  • From: Maarten ter Huurne <maarten@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] MIPS: JZ4740: Export timer API
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] pwm: Add Ingenic JZ4740 support
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] MIPS: JZ4740: Export timer API
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 3/3] pwm: Add Ingenic JZ4740 support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 2/3] MIPS: JZ4740: Export timer API
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] pwm: Add Ingenic JZ4740 support
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] MIPS: JZ4740: Move PWM driver to PWM framework
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: JZ4740: Break circular header dependency
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: JZ4740: Break circular header dependency
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 2/3] MIPS: JZ4740: Export timer API
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 3/3] pwm: Add Ingenic JZ4740 support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 0/3] MIPS: JZ4740: Move PWM driver to PWM framework
  • From: Maarten ter Huurne <maarten@xxxxxxxxxxxxxx>
• [PATCH 3/3] pwm: Add Ingenic JZ4740 support
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• [PATCH 2/3] MIPS: JZ4740: Export timer API
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• [PATCH 1/3] MIPS: JZ4740: Break circular header dependency
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• [PATCH 0/3] MIPS: JZ4740: Move PWM driver to PWM framework
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• [PATCH] MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [patch] MIPS: align address to HPAGE_SIZE when updating mmu for thp
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• Re: [PATCH v3] clk: add Loongson1B clock support
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• [PATCH v3 3/3] MIPS: BCM47xx: rewrite GPIO handling and use gpiolib
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v3 2/3] bcma: add GPIO driver for SoCs
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v3 0/3] MIPS: BCM47xx: use gpiolib
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v3 1/3] ssb: add function to return number of gpio lines
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH] clk: Make the generic clock API available by default
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH V2 1/2] asm-offsets.c: adding #define to break circular dependency
  • From: Jim Quinlan <jim2101024@xxxxxxxxx>
• Re: [PATCH 0/7] Prerequisites for BCM63XX UDC driver
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH] clk: Make the generic clock API available by default
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2 2/2] MIPS: irqflags.h: make funcs preempt-safe for non-mipsr2
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH V2 1/2] asm-offsets.c: adding #define to break circular dependency
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 1/2] asm-offsets.c: adding #define to break circular dependency
  • From: Jim Quinlan <jim2101024@xxxxxxxxx>
• [PATCH v3] clk: add Loongson1B clock support
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH V2 1/2] asm-offsets.c: adding #define to break circular dependency
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH V2 2/2] MIPS: irqflags.h: make funcs preempt-safe for non-mipsr2
  • From: "Jim Quinlan" <jim2101024@xxxxxxxxx>
• [PATCH V2 1/2] asm-offsets.c: adding #define to break circular dependency
  • From: "Jim Quinlan" <jim2101024@xxxxxxxxx>
• Re: [PATCH] clk: Make the generic clock API available by default
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] clk: Make the generic clock API available by default
  • From: Hans-Christian Egtvedt <egtvedt@xxxxxxxxxxxx>
• Re: [PATCH 1/2] asm-offsets.c: adding #define to break circular dependency
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] clk: Make the generic clock API available by default
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 7/7] MIPS: BCM63XX: Create platform_device for USBD
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: [PATCH v3 0/3] MIPS: ath79: allow to use USB on AR934x
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• Re: [PATCH v3 0/3] MIPS: ath79: allow to use USB on AR934x
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: panic in hrtimer_run_queues
  • From: Lin Ming <mlin@xxxxxxxxxxxxx>
• Re: panic in hrtimer_run_queues
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: panic in hrtimer_run_queues
  • From: Noor <noor.mubeen@xxxxxxxxx>
• panic in hrtimer_run_queues
  • From: Lin Ming <mlin@xxxxxxxxxxxxx>
• Re: [PATCH V4] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH V4] usb: gadget: bcm63xx UDC driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: linux-next: manual merge of the rr tree with the mips tree
  • From: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
• [PATCH 1/2] asm-offsets.c: adding #define to break circular dependency
  • From: "Jim Quinlan" <jim2101024@xxxxxxxxx>
• Re: [PATCH V2] usb: gadget: bcm63xx UDC driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH V3] usb: gadget: bcm63xx UDC driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH V3] usb: gadget: bcm63xx UDC driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V4] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: linux-next: manual merge of the rr tree with the mips tree
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: remove CONFIG_MTD_NAND_VERIFY_WRITE
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH] MIPS/mm: add compound tail page _mapcount when mapped
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Optimize TLB refill for RI/XI configurations.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: Optimize TLB refill for RI/XI configurations.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• Re: [PATCH 0/8] netdev/MIPS: Improvements to octeon_mgmt Ethernet driver.
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 0/8] netdev/MIPS: Improvements to octeon_mgmt Ethernet driver.
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v2] spi: Add SPI master controller for OCTEON SOCs.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2] spi: Add SPI master controller for OCTEON SOCs.
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH v2] spi: Add SPI master controller for OCTEON SOCs.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] SPI: MIPS: lantiq: adds spi-xway
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] SPI: MIPS: lantiq: adds spi-xway
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH] SPI: MIPS: lantiq: adds spi-xway
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 12/12] MIPS: Netlogic: XLP defconfig update
  • From: "Jayachandran C." <jchandra@xxxxxxxxxxxx>
• Re: [PATCH V3] usb: gadget: bcm63xx UDC driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: pull request for 3.7
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH] MIPS/mm: add compound tail page _mapcount when mapped
  • From: Jovi Zhang <bookjovi@xxxxxxxxx>
• Re: [PATCH V2] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V3] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: pull request for 3.7
  • From: "Steven J. Hill" <sjhill@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2] usb: gadget: bcm63xx UDC driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [2/2] spi: Add SPI master controller for OCTEON SOCs.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [2/2] spi: Add SPI master controller for OCTEON SOCs.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH 2/2] spi: Add SPI master controller for OCTEON SOCs.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 8/8] netdev: octeon_mgmt: Make multi-line comment style consistent.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 7/8] netdev: octeon_mgmt: Remove some useless 'inline'
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 6/8] netdev: octeon_mgmt: Cleanup and modernize MAC address handling.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 5/8] netdev: octeon_mgmt: Set the parent device.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 3/8] netdev: octeon_mgmt: Add hardware timestamp support.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 4/8] netdev: octeon_mgmt: Improve ethtool_ops.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 2/8] netdev: octeon_mgmt: Add support for 1Gig ports.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 1/8] MIPS: Octeon: Add octeon_io_clk_delay() function.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 0/8] netdev/MIPS: Improvements to octeon_mgmt Ethernet driver.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 2/2] spi: Add SPI master controller for OCTEON SOCs.
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 2/2] spi: Add SPI master controller for OCTEON SOCs.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 2/2] spi: Add SPI master controller for OCTEON SOCs.
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 2/2] spi: Add SPI master controller for OCTEON SOCs.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH resend] ifdef gic_present variable that is used only by malta
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 1/3 v4] MIPS: introduce CPU_GENERIC_DUMP_TLB
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 2/2] spi: Add SPI master controller for OCTEON SOCs.
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: OCTEON: Add register definitions for SPI host hardware.
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: pull request for 3.7
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• pull request for 3.7
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 12/12] MIPS: Netlogic: XLP defconfig update
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V2] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH v4 7/8] x86: switch the 64bit uncached page clear to SSE/AVX v2
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v4 5/8] x86: Add clear_page_nocache
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v4 2/8] THP: Pass fault address to __do_huge_pmd_anonymous_page()
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v4 8/8] mm: implement vm.clear_huge_page_nocache sysctl
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v4 1/8] THP: Use real address for NUMA policy
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v4 6/8] mm: make clear_huge_page cache clear only around the fault address
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v4 4/8] mm: pass fault address to clear_huge_page()
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v4 3/8] hugetlb: pass fault address to hugetlb_no_page()
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v4 0/8] Avoid cache trashing on clearing huge/gigantic page
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v3] clk: add Loongson1B clock support
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Fix module.c build for 32 bit
  • From: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH V2] MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH] usb: gadget: bcm63xx UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH v2] clk: add Loongson1B clock support
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• [PATCH] MIPS: Loongson1B: use common clock infrastructure instead of private APIs.
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH] clk: add Loongson1B clock support
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH] clk: add Loongson1B clock support
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• [PATCH] clk: add Loongson1B clock support
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH 0/2] ata: Updates for pata_octeon_cf driver.
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• [PATCH 1/2] MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 0/2] ata: Updates for pata_octeon_cf driver.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 2/2] ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• A question on preemption during local_irq_disable() in non-mipsr2 multiprocessor
  • From: Jim Quinlan <jim2101024@xxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: PCI Section mismatch error in linux-next.
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• PCI Section mismatch error in linux-next.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] MIPS: Optimize pgd_init and pmd_init
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Whitespace and various formatting clean-ups for microMIPS.
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 2/2] Fix pci id check.
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCH V6 12/15] ALSA: HDA: Make hda sound card usable for Loongson
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH V6 12/15] ALSA: HDA: Make hda sound card usable for Loongson
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH V6 15/15] MIPS: Loongson: Add a Loongson-3 default config file
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 14/15] MIPS: Loongson 3: Add CPU hotplug support
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 13/15] MIPS: Loongson 3: Add Loongson-3 SMP support
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 12/15] ALSA: HDA: Make hda sound card usable for Loongson
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 11/15] drm: Handle io prot correctly for MIPS
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 10/15] MIPS: Loongson: Add Loongson-3 Kconfig options
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 09/15] MIPS: Loongson: Add swiotlb to support big memory (>4GB)
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 08/15] MIPS: Loongson 3: Add serial port support
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 06/15] MIPS: Loongson 3: Add HT-linked PCI support
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 07/15] MIPS: Loongson 3: Add IRQ init and dispatch support
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 04/15] MIPS: Loongson 3: Add Lemote-3A machtypes definition
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 05/15] MIPS: Loongson: Add UEFI-like firmware interface support
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 03/15] MIPS: Loongson: Introduce and use cpu_has_coherent_cache feature
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 02/15] MIPS: Loongson: Add basic Loongson-3 CPU support
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 01/15] MIPS: Loongson: Add basic Loongson-3 definition
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• [PATCH V6 00/16] MIPS: Add Loongson-3 based machines support
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• Re: [PATCH v2 3/3] MIPS: BCM47xx: rewrite GPIO handling and use gpiolib
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH v2 3/3] MIPS: BCM47xx: rewrite GPIO handling and use gpiolib
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH v2 3/3] MIPS: BCM47xx: rewrite GPIO handling and use gpiolib
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address
  • From: Andrea Arcangeli <aarcange@xxxxxxxxxx>
• Re: [PATCH v2 3/3] MIPS: BCM47xx: rewrite GPIO handling and use gpiolib
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] MIPS: BCM47xx: rewrite GPIO handling and use gpiolib
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH v2 3/3] MIPS: BCM47xx: rewrite GPIO handling and use gpiolib
  • From: "Arend van Spriel" <arend@xxxxxxxxxxxx>
• Re: [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address
  • From: "Kirill A. Shutemov" <kirill@xxxxxxxxxxxxx>
• Re: [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address
  • From: Andrea Arcangeli <aarcange@xxxxxxxxxx>
• [PATCH] MIPS: Optimize pgd_init and pmd_init
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH v2 3/3] MIPS: BCM47xx: rewrite GPIO handling and use gpiolib
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address
  • From: "Kirill A. Shutemov" <kirill@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] MIPS: BCM47xx: rewrite GPIO handling and use gpiolib
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address
  • From: Andrea Arcangeli <aarcange@xxxxxxxxxx>
• [PATCH v2 3/3] MIPS: BCM47xx: rewrite GPIO handling and use gpiolib
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v2 2/3] bcma: add GPIO driver for SoCs
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v2 0/3] MIPS: BCM47xx: use gpiolib
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v2 1/3] ssb: add function to return number of gpio lines
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v3 5/7] x86: Add clear_page_nocache
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v3 3/7] hugetlb: pass fault address to hugetlb_no_page()
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v3 4/7] mm: pass fault address to clear_huge_page()
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v3 2/7] THP: Pass fault address to __do_huge_pmd_anonymous_page()
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v3 0/7] Avoid cache trashing on clearing huge/gigantic page
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v3 7/7] x86: switch the 64bit uncached page clear to SSE/AVX v2
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v3 1/7] THP: Use real address for NUMA policy
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH V2 1/4] MIPS: lantiq: adds support for nmi and ejtag bootrom vectors
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 1/4] MIPS: lantiq: split up IRQ IM ranges
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH] MIPS: lantiq: adds support for gptu timers
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH] MIPS: fix module.c build for 32 bit
  • From: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
• Re: [PATCH] I2C: MIPS: lantiq: add FALC-ON i2c bus master
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• [PATCH 4/4] MIPS: lantiq: enable pci clk conditional for xrx200 SoC
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 3/4] MIPS: lantiq: falcon clocks were not enabled properly
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 2/4] MIPS: lantiq: explicitly enable clkout generation
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 1/4] MIPS: lantiq: adds support for nmi and ejtag bootrom vectors
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 4/4] MIPS: lantiq: external irq sources are not loaded properly
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 3/4] MIPS: lantiq: dont register irq_chip for the irq cascade
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 2/4] MIPS: lantiq: timer irq can be different to 7
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 1/4] MIPS: lantiq: split up IRQ IM ranges
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH] I2C: MIPS: lantiq: add FALC-ON i2c bus master
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH] I2C: MIPS: lantiq: add FALC-ON i2c bus master
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• [PATCH] SPI: MIPS: lantiq: adds spi-xway
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH] I2C: MIPS: lantiq: add FALC-ON i2c bus master
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH V2] MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• Re: [PATCH V5 13/18] drm: Define SAREA_MAX for Loongson (PageSize = 16KB).
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V5 09/18] MIPS: Loongson: Add swiotlb to support big memory (>4GB).
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V5 13/18] drm: Define SAREA_MAX for Loongson (PageSize = 16KB).
  • From: Matt Turner <mattst88@xxxxxxxxx>
• Re: [PATCH V5 13/18] drm: Define SAREA_MAX for Loongson (PageSize = 16KB).
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V5 01/18] MIPS: Loongson: Add basic Loongson-3 definition.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V5 13/18] drm: Define SAREA_MAX for Loongson (PageSize = 16KB).
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V5 09/18] MIPS: Loongson: Add swiotlb to support big memory (>4GB).
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V5 01/18] MIPS: Loongson: Add basic Loongson-3 definition.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Fix for warning from FPU emulation code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: add default configuration for ath79
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• Re: [PATCH 0/2] Align MIPS swapper_pg_dir for faster code.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: add default configuration for ath79
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: ath79: don't hardcode the unavailability of the DSP ASE
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: Synchronize MIPS count one CPU at a time
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] kconfig: remove CONFIG_MTD_NAND_VERIFY_WRITE
  • From: Huang Shijie <b32955@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: fix module.c build for 32 bit
  • From: David Howells <dhowells@xxxxxxxxxx>
• Re: [PATCH] MIPS: fix module.c build for 32 bit
  • From: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
• Re: [PATCH V5 09/18] MIPS: Loongson: Add swiotlb to support big memory (>4GB).
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH] MIPS: OCTEON: Fix breakage due to 8250 changes.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] MIPS: add default configuration for ath79
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH] MIPS: ath79: don't hardcode the unavailability of the DSP ASE
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• Re: [PATCH 0/2] Align MIPS swapper_pg_dir for faster code.
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 1/2] vmlinux.lds.h: Allow architectures to add sections to the front of .bss
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 2/2] MIPS: Align swapper_pg_dir to 64K for better TLB Refill code.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 0/2] Align MIPS swapper_pg_dir for faster code.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] MIPS: OCTEON: Fix breakage due to 8250 changes.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: OCTEON: Fix breakage due to 8250 changes.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH V5 09/18] MIPS: Loongson: Add swiotlb to support big memory (>4GB).
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] MIPS: Fix for warning from FPU emulation code
  • From: "Jayachandran C" <jchandra@xxxxxxxxxxxx>
• Re: [PATCH] MIPS: Fix module.c build for 32 bit
  • From: David Howells <dhowells@xxxxxxxxxx>
• [PATCH] MIPS: Fix module.c build for 32 bit
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2] MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• Re: [PATCH] MIPS: fix module.c build for 32 bit
  • From: David Howells <dhowells@xxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Netlogic: define cpu_has_fpu macro
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 2/2] MIPS: Synchronize MIPS count one CPU at a time
  • From: "Jayachandran C" <jchandra@xxxxxxxxxxxx>
• [PATCH 1/2] MIPS: Netlogic: define cpu_has_fpu macro
  • From: "Jayachandran C" <jchandra@xxxxxxxxxxxx>
• [PATCH 0/2] MIPS: Netlogic: Fixes for 3.6
  • From: "Jayachandran C" <jchandra@xxxxxxxxxxxx>
• Re: [PATCH 3/3] MIPS: BCM47xx: rewrite GPIO handling and use gpiolib
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH V6 4/5] USB: Add EHCI bus glue for Loongson1x SoCs (UPDATED)
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH]: Improve atomic.h robustness
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] MIPS: ath79: don't override CPU ASE features
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• Re: [PATCH v3 3/4] MIPS: ath79: select HAVE_CLK
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] MIPS: ath79: use correct IRQ number for the OHCI controller on AR7240
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• Re: [PATCH v3 1/4] MIPS: ath79: fix number of GPIO lines for AR724[12]
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• Re: [PATCH V2] MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 2/2] MIPS: Synchronize MIPS count one CPU at a time
  • From: "Jayachandran C" <jchandra@xxxxxxxxxxxx>
• [PATCH 1/2] MIPS: Netlogic: define cpu_has_fpu macro
  • From: "Jayachandran C" <jchandra@xxxxxxxxxxxx>
• Re: [Bug-fix] backtrace when HAVE_FUNCTION_TRACER is enable
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] MIPS: ath79: don't override CPU ASE features
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] MIPS: ath79: select HAVE_CLK
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] MIPS: ath79: use correct IRQ number for the OHCI controller on AR7240
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] MIPS: ath79: fix number of GPIO lines for AR724[12]
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V5 09/18] MIPS: Loongson: Add swiotlb to support big memory (>4GB).
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V5 09/18] MIPS: Loongson: Add swiotlb to support big memory (>4GB).
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH] MIPS: fix module.c build for 32 bit
  • From: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 13/32] PCI/MIPS: use PCIe capabilities access functions to simplify implementation
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH v2 4/6] x86: Add clear_page_nocache
  • From: "Kirill A. Shutemov" <kirill@xxxxxxxxxxxxx>
• Re: [PATCH V5 09/18] MIPS: Loongson: Add swiotlb to support big memory (>4GB).
  • From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
• Re: [PATCH v2 4/6] x86: Add clear_page_nocache
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [Bug-fix] backtrace when HAVE_FUNCTION_TRACER is enable
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] x86: Add clear_page_nocache
  • From: Andi Kleen <ak@xxxxxxxxxxxxxxx>
• Re: [Bug-fix] backtrace when HAVE_FUNCTION_TRACER is enable
  • From: Akhilesh Kumar <akhilesh.lxr@xxxxxxxxx>
• Re: [PATCH] MIPS: fix module.c build for 32 bit
  • From: David Howells <dhowells@xxxxxxxxxx>
• [PATCH V2] MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  • From: Huacai Chen <chenhc@xxxxxxxxxx>
• Re: [PATCH v2 4/6] x86: Add clear_page_nocache
  • From: "Jan Beulich" <JBeulich@xxxxxxxx>
• Re: [PATCH v2 4/6] x86: Add clear_page_nocache
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH V5 14/18] ALSA: HDA: Make hda sound card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [alsa-devel] [PATCH V5 14/18] ALSA: HDA: Make hda sound card usable for Loongson.
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH] MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH 01/16] MIPS: Loongson: Add basic Loongson-3 definition.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 01/16] MIPS: Loongson: Add basic Loongson-3 definition.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V5 00/16] MIPS: Add Loongson-3 based machines support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [Bug-fix] backtrace when HAVE_FUNCTION_TRACER is enable
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH V5 10/18] MIPS: Loongson: Add Loongson-3 Kconfig options.
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH V5 09/18] MIPS: Loongson: Add swiotlb to support big memory (>4GB).
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH V5 00/16] MIPS: Add Loongson-3 based machines support.
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH V5 04/18] MIPS: Loongson: Make Loongson-3 to use BCD format for RTC.
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH V5 01/18] MIPS: Loongson: Add basic Loongson-3 definition.
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V5 18/18] MIPS: Loongson: Add a Loongson-3 default config file.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 17/18] MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 16/18] MIPS: Loongson 3: Add CPU hotplug support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 15/18] MIPS: Loongson 3: Add Loongson-3 SMP support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 14/18] ALSA: HDA: Make hda sound card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 13/18] drm: Define SAREA_MAX for Loongson (PageSize = 16KB).
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 12/18] drm: Handle io prot correctly for MIPS.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 11/18] drm/radeon: Include swiotlb.h if SWIOTLB configured.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 10/18] MIPS: Loongson: Add Loongson-3 Kconfig options.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 09/18] MIPS: Loongson: Add swiotlb to support big memory (>4GB).
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 08/18] MIPS: Loongson 3: Add serial port support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 07/18] MIPS: Loongson 3: Add IRQ init and dispatch support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 06/18] MIPS: Loongson 3: Add HT-linked PCI support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 05/18] MIPS: Loongson: Add UEFI-like firmware interface support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 04/18] MIPS: Loongson: Make Loongson-3 to use BCD format for RTC.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 03/18] MIPS: Loongson 3: Add Lemote-3A machtypes definition.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 01/18] MIPS: Loongson: Add basic Loongson-3 definition.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 02/18] MIPS: Loongson: Add basic Loongson-3 CPU support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V5 00/16] MIPS: Add Loongson-3 based machines support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH] MIPS: OCTEON: Fix broken interrupt controller code.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 2/3] bcma: add GPIO driver for SoCs
  • From: "John W. Linville" <linville@xxxxxxxxxxxxx>
• [PATCH v2] MIPS: init module specific mips_hi16_list to NULL
  • From: Tony Wu <tung7970@xxxxxxxxx>
• Re: Direct I/O bug in kernel
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• Re: [PATCH] MIPS: init module specific mips_hi16_list to NULL
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH] MIPS: init module specific mips_hi16_list to NULL
  • From: Tony Wu <tung7970@xxxxxxxxx>
• Re: Direct I/O bug in kernel
  • From: Victor Meyerson <calculuspenguin@xxxxxxxxx>
• Re: [Bug-fix] backtrace when HAVE_FUNCTION_TRACER is enable
  • From: Akhilesh Kumar <akhilesh.lxr@xxxxxxxxx>
• Re: [PATCH v2 6/6] x86: switch the 64bit uncached page clear to SSE/AVX v2
  • From: "Jan Beulich" <JBeulich@xxxxxxxx>
• Re: [PATCH v2 4/6] x86: Add clear_page_nocache
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• Re: [PATCH v2 4/6] x86: Add clear_page_nocache
  • From: "Jan Beulich" <JBeulich@xxxxxxxx>
• [PATCH v2 1/6] THP: Use real address for NUMA policy
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v2 3/6] THP: Pass real, not rounded, address to clear_huge_page
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v2 2/6] mm: make clear_huge_page tolerate non aligned address
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v2 4/6] x86: Add clear_page_nocache
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v2 6/6] x86: switch the 64bit uncached page clear to SSE/AVX v2
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v2 5/6] mm: make clear_huge_page cache clear only around the fault address
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [PATCH v2 0/6] Avoid cache trashing on clearing huge/gigantic page
  • From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
• [Bug-fix] backtrace when HAVE_FUNCTION_TRACER is enable
  • From: Akhilesh Kumar <akhilesh.lxr@xxxxxxxxx>
• Re: [alsa-devel] [PATCH V4 12/16] ALSA: HDA: Make hda sound card usable for Loongson.
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [alsa-devel] [PATCH V4 12/16] ALSA: HDA: Make hda sound card usable for Loongson.
  • From: Chen Jie <chenj@xxxxxxxxxx>
• Re: [Memory leak]: memory leak in apply_r_mips_lo16_rel
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: mips: sead3: Update for EHCI register structure.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: mips: sead3: Update for EHCI register structure.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] MIPS: fix module.c build for 32 bit
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH] usb: host: mips: sead3: Update for EHCI register structure.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 3/3] MIPS: BCM47xx: rewrite GPIO handling and use gpiolib
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 2/3] bcma: add GPIO driver for SoCs
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 1/3] ssb: add function to return number of gpio lines
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 0/3] MIPS: BCM47xx: use gpiolib
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v3 3/3] MIPS: ath79: register USB host controller on the DB120 board
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH v3 2/3] MIPS: ath79: add USB platform setup code for AR934X
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH v3 1/3] MIPS: ath79: use a helper function for USB resource initialization
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH v3 0/3] MIPS: ath79: allow to use USB on AR934x
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH v3 3/4] MIPS: ath79: select HAVE_CLK
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH v3 4/4] MIPS: ath79: don't override CPU ASE features
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH v3 2/4] MIPS: ath79: use correct IRQ number for the OHCI controller on AR7240
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH v3 1/4] MIPS: ath79: fix number of GPIO lines for AR724[12]
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH v3 0/4] MIPS: ath79: various fixes
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [Memory leak]: memory leak in apply_r_mips_lo16_rel
  • From: Akhilesh Kumar <akhilesh.lxr@xxxxxxxxx>
• Re: development board?
  • From: "Oliver Kowalke" <oliver.kowalke@xxxxxx>
• Re: development board?
  • From: "Oliver Kowalke" <oliver.kowalke@xxxxxx>
• [PATCH v2] MIPS: Add detection of DSP ASE Revision 2.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v3,2/9] MIPS: Add support for microMIPS instructions.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v4] MIPS: Add support for the M14KEc core.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v7,04/10] Add the MIPS32R2 'ins' and 'ext' instructions for use by the kernel's micro-assembler.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: [alsa-devel] [PATCH V4 12/16] ALSA: HDA: Make hda sound card usable for Loongson.
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [alsa-devel] [PATCH V4 12/16] ALSA: HDA: Make hda sound card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V4 11/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [alsa-devel] [PATCH V4 12/16] ALSA: HDA: Make hda sound card usable for Loongson.
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH V4 11/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Michel Dänzer <michel@xxxxxxxxxxx>
• [PATCH V4 16/16] MIPS: Loongson: Add a Loongson-3 default config file.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 15/16] MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 14/16] MIPS: Loongson 3: Add CPU hotplug support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 13/16] MIPS: Loongson 3: Add Loongson-3 SMP support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 12/16] ALSA: HDA: Make hda sound card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 11/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 09/16] MIPS: Loongson: Add swiotlb to support big memory (>4GB).
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 10/16] MIPS: Loongson: Add Loongson-3 Kconfig options.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 08/16] MIPS: Loongson 3: Add serial port support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 07/16] MIPS: Loongson 3: Add IRQ init and dispatch support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 06/16] MIPS: Loongson 3: Add HT-linked PCI support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 05/16] MIPS: Loongson: Add UEFI-like firmware interface support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 04/16] MIPS: Loongson: Make Loongson-3 to use BCD format for RTC.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 03/16] MIPS: Loongson 3: Add Lemote-3A machtypes definition.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 02/16] MIPS: Loongson: Add basic Loongson-3 CPU support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 01/16] MIPS: Loongson: Add basic Loongson-3 definition.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V4 00/16] MIPS: Add Loongson-3 based machines support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: development board?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: SMVP Support on MIPS34KC (linux-2.6.35)
  • From: JoeJ <tttechmail@xxxxxxxxx>
• Re: development board?
  • From: Kaj-Michael Lang <milang@xxxxxxx>
• Re: [PATCH V3 11/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH] MIPS: oops when show backtrace of all active cpu
  • From: Fan Du <fan.du@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: oops when show backtrace of all active cpu
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH] MIPS: oops when show backtrace of all active cpu
  • From: Fan Du <fdu@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add detection of DSP ASE Revision 2.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH v3 13/32] PCI/MIPS: use PCIe capabilities access functions to simplify implementation
  • From: Jiang Liu <liuj97@xxxxxxxxx>
• Re: [PATCH] Fix newport con crashes
  • From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
• Re: [PATCH 1/4] MIPS: AR7: add select HAVE_CLK
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 4/4] MIPS: loongson1: more clk support and add select HAVE_CLK
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH 1/4] MIPS: AR7: add select HAVE_CLK
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH 4/4] MIPS: loongson1: more clk support and add select HAVE_CLK
  • From: Yoichi Yuasa <yuasa@xxxxxxxxxxxxxx>
• [PATCH 3/4] MIPS: txx9: add select HAVE_CLK
  • From: Yoichi Yuasa <yuasa@xxxxxxxxxxxxxx>
• [PATCH 2/4] MIPS: BCM63xx: add select HAVE_CLK
  • From: Yoichi Yuasa <yuasa@xxxxxxxxxxxxxx>
• [PATCH 1/4] MIPS: AR7: add select HAVE_CLK
  • From: Yoichi Yuasa <yuasa@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add emulation for fpureg-mem unaligned access
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add emulation for fpureg-mem unaligned access
  • From: Lluís Batlle i Rossell <viric@xxxxxxxxxx>
• Re: [PATCH] MIPS: Add emulation for fpureg-mem unaligned access
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add emulation for fpureg-mem unaligned access
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: SMVP Support on MIPS34KC (linux-2.6.35)
  • From: "Steven J. Hill" <sjhill@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add emulation for fpureg-mem unaligned access
  • From: Lluís Batlle i Rossell <viric@xxxxxxxxxx>
• [ 04/41] MIPS: Properly align the .data..init_task section.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: SMVP Support on MIPS34KC (linux-2.6.35)
  • From: Jeffin <jeffinmammen@xxxxxxxxx>
• Re: SMVP Support on MIPS34KC (linux-2.6.35)
  • From: "Steven J. Hill" <sjhill@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Fix newport con crashes
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: SMVP Support on MIPS34KC (linux-2.6.35)
  • From: JoeJ <tttechmail@xxxxxxxxx>
• [PATCH] Fix newport con crashes
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: fix tc_id calculation
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• Re: [PATCH] MIPS: fix tc_id calculation
  • From: RongQing Li <roy.qing.li@xxxxxxxxx>
• Re: SMVP Support on MIPS34KC (linux-2.6.35)
  • From: "Steven J. Hill" <sjhill@xxxxxxxxxxxxxxxxxx>
• Re: Direct I/O bug in kernel
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• SMVP Support on MIPS34KC (linux-2.6.35)
  • From: JoeJ <tttechmail@xxxxxxxxx>
• [ 04/40] MIPS: Properly align the .data..init_task section.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [ 14/23] MIPS: Properly align the .data..init_task section.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [mips32r1 cpu] Advice needed: "Machine Check exception - caused by multiple matching entries in the TLB"
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V7 2/4] (Updated) MIPS: Add board support for Loongson1B
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH V7 4/4] (Updated) MIPS: Add defconfig for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• [PATCH V7 3/4] (Updated) MIPS: Add Makefile and Kconfig for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• [PATCH V7 2/4] (Updated) MIPS: Add board support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• [PATCH] MIPS: Whitespace and various formatting clean-ups for microMIPS.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH] MIPS: Update MALTA config files.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v3,02/10] MIPS: Changes to configuration files for SEAD-3 platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v3] MIPS: Add support for the M14KEc core.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2,2/9] MIPS: Add support for microMIPS instructions.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2,3/9] MIPS: Add support for microMIPS exception handling.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH] MIPS: Add microMIPS vdso support.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2,9/9] MIPS: Add microMIPS configuration option.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2,1/9] MIPS: Add microMIPS breakpoints and DSP support.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH] MIPS: Add detection of DSP ASE Revision 2.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v5,01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v6,04/10] Add the MIPS32R2 'ins' and 'ext' instructions for use by the kernel's micro-assembler.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: [PATCH] mtx-1: add udelay to mtx1_pci_idsel
  • From: Bruno Randolf <br1@xxxxxxxxxxx>
• Re: [PATCH] mtx-1: add udelay to mtx1_pci_idsel
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxx>
• Re: Direct I/O bug in kernel
  • From: Victor Meyerson <calculuspenguin@xxxxxxxxx>
• Re: [PATCH] mtx-1: add udelay to mtx1_pci_idsel
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxx>
• Re: [PATCH] mtx-1: add udelay to mtx1_pci_idsel
  • From: Bruno Randolf <br1@xxxxxxxxxxx>
• Re: [PATCH V7 2/4] MIPS: Add board support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH] mtx-1: add udelay to mtx1_pci_idsel
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxx>
• Re: [PATCH] mtx-1: add udelay to mtx1_pci_idsel
  • From: Bruno Randolf <br1@xxxxxxxxxxx>
• Re: [PATCH 02/12] MIPS: Netlogic: Fix low-level flush on core wakeup
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 05/12] MIPS: PCI: Fix for byte swap for Netlogic XLP
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Direct I/O bug in kernel
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• [PATCH] MIPS: lantiq: explicitly enable clkout generation
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 2/5] MIPS: lantiq: add helper to set PCI clock delay
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 1/3] mips: zero out pg_data_t when it's allocated
  • From: Minchan Kim <minchan@xxxxxxxxxx>
• Re: [mips32r1 cpu] Advice needed: "Machine Check exception - caused by multiple matching entries in the TLB"
  • From: kr kr <kr-jiffy@xxxxxxxxx>
• Re: [PATCH 2/5] MIPS: lantiq: add helper to set PCI clock delay
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 2/5] MIPS: lantiq: add helper to set PCI clock delay
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 5/5] MIPS: lantiq: platform specific CLK fixup
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 4/5] MIPS: lantiq: adds device_tree_init function
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 3/5] MIPS: lantiq: make use of new PCI clock helper
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 2/5] MIPS: lantiq: add helper to set PCI clock delay
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 1/5] MIPS: lantiq: fix interface clock and PCI control register offset
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: linux-next: build failure after merge of the tty tree
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: linux-next: build failure after merge of the tty tree
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: linux-next: build failure after merge of the tty tree
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: development board?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: development board?
  • From: John Long <codeblue@xxxxxxxx>
• Re: [mips32r1 cpu] Advice needed: "Machine Check exception - caused by multiple matching entries in the TLB"
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] I2C: SiByte: Convert the driver to make use of interrupts
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• development board?
  • From: Oliver Kowalke <oliver.kowalke@xxxxxx>
• Re: [PATCH] MIPS: fix bug.h MIPS build regression
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: fix bug.h MIPS build regression
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH net-next 0/8] etherdevice: Rename random_ether_addr to eth_random_addr
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: fix bug.h MIPS build regression
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH net-next 8/8] arch: Use eth_random_addr
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH net-next 8/8] arch: Use eth_random_addr
  • From: Mark Salter <msalter@xxxxxxxxxx>
• Re: [PATCH net-next 0/8] etherdevice: Rename random_ether_addr to eth_random_addr
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH net-next 0/8] etherdevice: Rename random_ether_addr to eth_random_addr
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH net-next 0/8] etherdevice: Rename random_ether_addr to eth_random_addr
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH net-next 0/8] etherdevice: Rename random_ether_addr to eth_random_addr
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH UPDATED 06/12] MIPS: Netlogic: early console fix
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• Re: [PATCH net-next 8/8] arch: Use eth_random_addr
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• [PATCH V3 7/7] MIPS: BCM63XX: Create platform_device for USBD
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 1/5] MIPS: perf: Change the "mips_perf_event" table unsupported indicator.
  • From: "Al Cooper" <alcooperx@xxxxxxxxx>
• [PATCH 5/5] MIPS: perf: Add perf functionality for BMIPS5000
  • From: "Al Cooper" <alcooperx@xxxxxxxxx>
• [PATCH 4/5] MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP
  • From: "Al Cooper" <alcooperx@xxxxxxxxx>
• [PATCH 3/5] MIPS: perf: Remove unnecessary #ifdef
  • From: "Al Cooper" <alcooperx@xxxxxxxxx>
• [PATCH 2/5] MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt)
  • From: "Al Cooper" <alcooperx@xxxxxxxxx>
• Re: [PATCH 06/12] MIPS: Netlogic: early console fix
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 12/12] MIPS: Netlogic: XLP defconfig update
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 05/12] MIPS: PCI: Fix for byte swap for Netlogic XLP
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 09/12] MIPS: Netlogic: Add support for built in DTB
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 10/12] MIPS: oprofile: Support for XLR/XLS processors
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 11/12] MIPS: perf: Add XLP support for hardware perf.
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 07/12] MIPS: Netlogic: DTS file for XLP boards
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 04/12] MIPS: Netlogic: remove cpu_has_dc_aliases define for XLP
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 08/12] MIPS: Netlogic: Move serial ports to device tree
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 03/12] MIPS: Netlogic: merge of.c into setup.c
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 06/12] MIPS: Netlogic: early console fix
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 02/12] MIPS: Netlogic: Fix low-level flush on core wakeup
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 00/12] Netlogic XLR/XLP updates.
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 01/12] MIPS: Netlogic: Fix indentation of smpboot.S
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• Re: Please recommend distro for Lemote Fuloong
  • From: John Long <codeblue@xxxxxxxx>
• [PATCH 3/3] MIPS: BCM63XX: use a switch for external irq config
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH 2/3] MIPS: BCM63XX: don't write to the chipid register on reboot
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH 1/3] MIPS: BCM63XX: add external irq support for BCM6345
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH 0/3] MIPS: BCM63XX: small fixes from the BCM6368 patches
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH] MIPS: BCM63XX: remove bogus ENETSW_TXDMA interrupts from BCM6328
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: [PATCH] MIPS: BCM63XX: select HAVE_CLK
  • From: viresh kumar <viresh.kumar2@xxxxxxx>
• [PATCH] MIPS: BCM63XX: select HAVE_CLK
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH net-next 8/8] arch: Use eth_random_addr
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH net-next 0/8] etherdevice: Rename random_ether_addr to eth_random_addr
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: Please recommend distro for Lemote Fuloong
  • From: Matt Turner <mattst88@xxxxxxxxx>
• [PATCH] mtx-1: add udelay to mtx1_pci_idsel
  • From: Bruno Randolf <br1@xxxxxxxxxxx>
• [mips32r1 cpu] Advice needed: "Machine Check exception - caused by multiple matching entries in the TLB"
  • From: kr kr <kr-jiffy@xxxxxxxxx>
• RE: [PATCH v4,04/10] Add the MIPS32R2 'ins' and 'ext' instructions for use by the kernel's micro-assembler.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• [PATCH v5,04/10] Add the MIPS32R2 'ins' and 'ext' instructions for use by the kernel's micro-assembler.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: [PATCH 0/7] Prerequisites for BCM63XX UDC driver
  • From: Florian Fainelli <ffainelli@xxxxxxxxxx>
• Re: [PATCH 0/7] Prerequisites for BCM63XX UDC driver
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: [PATCH] MIPS: Add emulation for fpureg-mem unaligned access
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 0/7] Prerequisites for BCM63XX UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V2 7/7] MIPS: BCM63XX: Create platform_device for USBD
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V2 6/7] MIPS: BCM63XX: Add register and IRQ definitions for USB 2.0 device
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V2 3/7] MIPS: BCM63XX: Add new IUDMA definitions needed for USBD
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V2 2/7] MIPS: BCM63XX: Move DMA descriptor definition into common header file
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: some question about struct ktermios
  • From: Philipp Ittershagen <p.ittershagen@xxxxxxxxxxxxxx>
• some question about struct ktermios
  • From: loody <miloody@xxxxxxxxx>
• [PATCH V7 3/4] MIPS: Add Makefile and Kconfig for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• [PATCH V7 4/4] MIPS: Add defconfig for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• [PATCH V7 2/4] MIPS: Add board support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Bypass "find_busiest_queue" in VSMP (SMVP) mode
  • From: Suprasad Mutalik Desai <suprasad.desai@xxxxxxxxx>
• Please recommend distro for Lemote Fuloong
  • From: Code Blue <codeblue@xxxxxxxx>
• Re: [PATCH] mips: pci-lantiq: Fix check for valid gpio
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2] Octeon 6xxx: Add Power Throttling support for CN6xxx and above
  • From: philby john <pjohn@xxxxxxxxxx>
• [PATCH] MIPS: fix tc_id calculation
  • From: roy.qing.li@xxxxxxxxx
• Re: [PATCH v4,04/10] Add the MIPS32R2 'ins' and 'ext' instructions for use by the kernel's micro-assembler.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] I2C: SiByte: Convert the driver to make use of interrupts
  • From: Matt Turner <mattst88@xxxxxxxxx>
• [PATCH v3,5/5] MIPS: Add option to disable software I/O coherency.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2] MIPS: Add support for the M14KEc core.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v4,04/10] Add the MIPS32R2 'ins' and 'ext' instructions for use by the kernel's micro-assembler.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH] MIPS: Turn on PCI 2.1 compatability for Malta's PIIX4 controller.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH mips-for-linux-next] hw_random: bcm63xx: fix section mismatch of the probe() function
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH v2 0/4] netdev/phy: 10G PHY support.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• RE: [PATCH 05/33] MIPS: AR7: Cleanup files effected by firmware changes.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• Re: [PATCH 05/33] MIPS: AR7: Cleanup files effected by firmware changes.
  • From: "Imre Kaloz" <kaloz@xxxxxxxxxxx>
• Re: [PATCH RESEND] mips: pci-lantiq: Fix check for valid gpio
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH v2 0/4] netdev/phy: 10G PHY support.
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH RESEND] mips: pci-lantiq: Fix check for valid gpio
  • From: Roland Stigge <stigge@xxxxxxxxx>
• [PATCH v2 0/4] netdev/phy: 10G PHY support.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 1/4] netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 4/4] netdev/phy: Add driver for Broadcom BCM87XX 10G Ethernet PHYs
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 2/4] netdev/phy/of: Handle IEEE802.3 clause 45 Ethernet PHYs in of_mdiobus_register()
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 3/4] netdev/phy/of: Add more methods for binding PHY devices to drivers.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• some question about mips mtc0/mfc0 usage
  • From: loody <miloody@xxxxxxxxx>
• RE: [PATCH 00/33] Cleanup firmware support across multiple platforms.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• RE: [PATCH 00/33] Cleanup firmware support across multiple platforms.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• Re: [PATCH 00/33] Cleanup firmware support across multiple platforms.
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• RE: [PATCH 01/33] MIPS: Add environment variable processing code to firmware library.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• Re: [PATCH 00/33] Cleanup firmware support across multiple platforms.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2,05/33] MIPS: AR7: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• RE: [PATCH 00/33] Cleanup firmware support across multiple platforms.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• Re: [PATCH 2/7] MIPS: BCM63XX: Move DMA descriptor definition into common header file
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: [PATCH 00/33] Cleanup firmware support across multiple platforms.
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: [PATCH 05/33] MIPS: AR7: Cleanup files effected by firmware changes.
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 00/33] Cleanup firmware support across multiple platforms.
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH v5,1/5] MIPS: Add support for the 1074K core.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 21/33] MIPS: Netlogic: Cleanup firmware support for the XLR platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 15/33] MIPS: Lasat: Cleanup firmware support for the Lasat platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 31/33] MIPS: txx9: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 12/33] MIPS: jz4740: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 11/33] MIPS: jz4740: Cleanup firmware support for the JZ4740 platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 28/33] MIPS: RB532: Cleanup firmware support for RB532 platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 16/33] MIPS: Lasat: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 30/33] MIPS: txx9: Cleanup firmware support for txx9 platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 17/33] MIPS: Loongson: Cleanup firmware support for the Loongson platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 19/33] MIPS: Malta: Cleanup firmware support for the Malta platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 25/33] MIPS: PNX83xx, PNX8550: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 23/33] MIPS: MSP71xx, Yosemite: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 24/33] MIPS: PNX83xx, PNX8550: Cleanup firmware support for PNX platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 20/33] MIPS: Malta: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 29/33] MIPS: RB532: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 14/33] MIPS: lantiq: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 32/33] MIPS: vr41xx: Cleanup firmware support for vr41xx platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 10/33] MIPS: Emma: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 13/33] MIPS: lantiq: Cleanup firmware support for the lantiq platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 27/33] MIPS: PowerTV: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 18/33] MIPS: Loongson: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 22/33] MIPS: MSP71xx, Yosemite: Cleanup firmware support for PMC platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 26/33] MIPS: PowerTV: Cleanup firmware support for PowerTV platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 33/33] MIPS: vr41xx: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 09/33] MIPS: Emma: Cleanup firmware support for the Emma platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 08/33] MIPS: Cobalt: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 07/33] MIPS: Cobalt: Cleanup firmware support for the Cobalt platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 06/33] MIPS: ath79: Cleanup firmware support for the ath79 platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 05/33] MIPS: AR7: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 04/33] MIPS: AR7: Cleanup firmware support for the AR7 platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 03/33] MIPS: Alchemy: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 02/33] MIPS: Alchemy: Cleanup firmware support for Alchemy platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 01/33] MIPS: Add environment variable processing code to firmware library.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 00/33] Cleanup firmware support across multiple platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: [PATCH 1/4] netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 1/4] netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 1/4] netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v4,1/5] MIPS: Add support for the 1074K core.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH v4,1/5] MIPS: Add support for the 1074K core.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH]: Improve atomic.h robustness
  • From: Joshua Kinard <kumba@xxxxxxxxxx>
• Re: booting linux-3.3 or linux 3.4 on an SGI O2?
  • From: Joshua Kinard <kumba@xxxxxxxxxx>
• Re: booting linux-3.3 or linux 3.4 on an SGI O2?
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: booting linux-3.3 or linux 3.4 on an SGI O2?
  • From: Joshua Kinard <kumba@xxxxxxxxxx>
• [PATCH 7/7] MIPS: BCM63XX: Create platform_device for USBD
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 6/7] MIPS: BCM63XX: Add register and IRQ definitions for USB 2.0 device
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 5/7] MIPS: BCM63XX: Fix USB IRQ definitions for 6328
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 4/7] MIPS: BCM63XX: Add register definitions for USBD dependencies
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 3/7] MIPS: BCM63XX: Add new IUDMA definitions needed for USBD
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 2/7] MIPS: BCM63XX: Move DMA descriptor definition into common header file
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 1/7] MIPS: BCM63XX: Expose the USBH/USBD clocks on BCM6328/BCM6368
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 0/7] Prerequisites for BCM63XX UDC driver
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH V3 11/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 4/4] netdev/phy: Add driver for Broadcom BCM87XX 10G Ethernet PHYs
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 1/4] netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 3/4] netdev/phy/of: Add more methods for binding PHY devices to drivers.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 2/4] netdev/phy/of: Handle IEEE802.3 clause 45 Ethernet PHYs in of_mdiobus_register()
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 0/4] netdev/phy: 10G PHY support.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] MIPS: fix bug.h MIPS build regression
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 11/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V3 11/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V3 11/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V3 11/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Re: [PATCH V3 11/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>