Linux for MIPS

• Thread Index

• Re: [PATCH V3 11/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Christian König <deathsimple@xxxxxxxxxxx>
• Re: [PATCH V3 11/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V3 11/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH V3 16/16] MIPS: Loongson: Add a Loongson-3 default config file.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 15/16] MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 14/16] MIPS: Loongson 3: Add CPU hotplug support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 13/16] MIPS: Loongson 3: Add Loongson-3 SMP support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 12/16] ALSA: HDA: Make hda sound card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 11/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 10/16] MIPS: Loongson: Add Loongson-3 Kconfig options.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 09/16] MIPS: Loongson: Add swiotlb to support big memory (>4GB).
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 08/16] MIPS: Loongson 3: Add serial port support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 07/16] MIPS: Loongson 3: Add IRQ init and dispatch support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 06/16] MIPS: Loongson 3: Add HT-linked PCI support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 05/16] MIPS: Loongson: Add UEFI-like firmware interface support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 04/16] MIPS: Loongson: Make Loongson-3 to use BCD format for RTC.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 03/16] MIPS: Loongson 3: Add Lemote-3A machtypes definition.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 02/16] MIPS: Loongson: Add basic Loongson-3 CPU support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 01/16] MIPS: Loongson: Add basic Loongson-3 definition.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V3 00/16] MIPS: Add Loongson-3 based machines support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH -mm v2 09/11] mm: remove MIPS arch_get_unmapped_area code
  • From: Rik van Riel <riel@xxxxxxxxxxx>
• Re: [PATCH V7 2/4] MIPS: Add board support for Loongson1B
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V7 2/4] MIPS: Add board support for Loongson1B
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH V7 2/4] MIPS: Add board support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH V7 2/4] MIPS: Add board support for Loongson1B
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH V7 2/4] MIPS: Add board support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH V7 2/4] MIPS: Add board support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH V7 2/4] MIPS: Add board support for Loongson1B
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH V7 2/4] MIPS: Add board support for Loongson1B
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH V7 2/4] MIPS: Add board support for Loongson1B
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V7 1/4] MIPS: Add CPU support for Loongson1B
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add emulation for fpureg-mem unaligned access
  • From: Lluís Batlle i Rossell <viric@xxxxxxxxxx>
• Re: [PATCH V2 12/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [PATCH] MIPS: fix bug.h MIPS build regression
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Build regressions/improvements in v3.5-rc3
  • From: Giuseppe CAVALLARO <peppe.cavallaro@xxxxxx>
• Re: [PATCH] MIPS: fix bug.h MIPS build regression
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH V2 12/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: Build regressions/improvements in v3.5-rc3
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: fix bug.h MIPS build regression
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH V2 15/16] MIPS: Loongson 3: Add CPU Hotplug support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V2 12/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V2 12/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Lucas Stach <dev@xxxxxxxxxx>
• Re: [PATCH V2 15/16] MIPS: Loongson 3: Add CPU Hotplug support.
  • From: Yong Zhang <yong.zhang@xxxxxxxxxxxxx>
• [PATCH] MIPS: fix bug.h MIPS build regression
  • From: Yoichi Yuasa <yuasa@xxxxxxxxxxxxxx>
• Re: [PATCH V2 12/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: Build regressions/improvements in v3.5-rc3
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH V2 12/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Alex Deucher <alexdeucher@xxxxxxxxx>
• Re: [PATCH] mips: pci-lantiq: Fix check for valid gpio
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: MIPS: Fixup ordering of micro assembler instructions.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: MIPS: Fixup ordering of micro assembler instructions.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 12/16] drm/radeon: Make radeon card usable for Loongson.
  • From: "j.glisse" <j.glisse@xxxxxxxxx>
• Re: [PATCH V2 12/16] drm/radeon: Make radeon card usable for Loongson.
  • From: "j.glisse" <j.glisse@xxxxxxxxx>
• Re: [PATCH V2 11/16] ata: Use 32-bit DMA in AHCI for Loongson-3.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V2 11/16] ata: Use 32-bit DMA in AHCI for Loongson-3.
  • From: Jeff Garzik <jeff@xxxxxxxxxx>
• Re: [PATCH V2 03/16] MIPS: Loongson 3: Add Lemote-3A machtypes definition.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V2 03/16] MIPS: Loongson 3: Add Lemote-3A machtypes definition.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH V2 15/16] MIPS: Loongson 3: Add CPU Hotplug support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [alsa-devel] [PATCH V2 13/16] ALSA: HDA: Make hda sound card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V2 12/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V2 02/16] MIPS: Loongson: Add basic Loongson-3 CPU support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V2 01/16] MIPS: Loongson: Add basic Loongson-3 definition.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH V2 02/16] MIPS: Loongson: Add basic Loongson-3 CPU support.
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH V2 01/16] MIPS: Loongson: Add basic Loongson-3 definition.
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH V2 15/16] MIPS: Loongson 3: Add CPU Hotplug support.
  • From: Yong Zhang <yong.zhang@xxxxxxxxxxxxx>
• Re: [PATCH V2 15/16] MIPS: Loongson 3: Add CPU Hotplug support.
  • From: Yong Zhang <yong.zhang@xxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH V2 13/16] ALSA: HDA: Make hda sound card usable for Loongson.
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [alsa-devel] [PATCH V2 13/16] ALSA: HDA: Make hda sound card usable for Loongson.
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: [PATCH V2 12/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Michel Dänzer <michel@xxxxxxxxxxx>
• Re: [PATCH V2 12/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH V2 16/16] MIPS: Loongson: Add a Loongson-3 default config file.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 15/16] MIPS: Loongson 3: Add CPU Hotplug support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 14/16] MIPS: Loongson 3: Add Loongson-3 SMP support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 13/16] ALSA: HDA: Make hda sound card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 12/16] drm/radeon: Make radeon card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 11/16] ata: Use 32-bit DMA in AHCI for Loongson-3.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 10/16] MIPS: Loongson: Add Loongson-3 Kconfig options.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 09/16] MIPS: Loongson: Add swiotlb to support big memory (>4GB).
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 08/16] MIPS: Loongson 3: Add serial port support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 07/16] MIPS: Loongson 3: Add IRQ init and dispatch support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 06/16] MIPS: Loongson 3: Add HT-linked PCI support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 05/16] MIPS: Loongson: Add UEFI-like firmware interface support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 04/16] MIPS: Loongson: Make Loongson-3 to use BCD format for RTC.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 03/16] MIPS: Loongson 3: Add Lemote-3A machtypes definition.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 02/16] MIPS: Loongson: Add basic Loongson-3 CPU support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 01/16] MIPS: Loongson: Add basic Loongson-3 definition.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH V2 00/14] MIPS: Add Loongson-3 based machines support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH 09/14] ata: Use 32bit DMA in AHCI for Loongson 3.
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH 09/14] ata: Use 32bit DMA in AHCI for Loongson 3.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH 09/14] ata: Use 32bit DMA in AHCI for Loongson 3.
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [PATCH v2] MIPS: BCM63XX: fix SPI message control register handling for BCM6338/6348
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH] mips: pci-lantiq: Fix check for valid gpio
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: [PATCH 09/14] ata: Use 32bit DMA in AHCI for Loongson 3.
  • From: huacai chen <chenhuacai@xxxxxxxxx>
• Re: Build regressions/improvements in v3.5-rc3
  • From: Andreas Schwab <schwab@xxxxxxxxxxxxxx>
• [PATCH] MIPS: BCM63XX: fix SPI message control register handling for BCM6338/6348
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: Build regressions/improvements in v3.5-rc3
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: Build regressions/improvements in v3.5-rc3
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 09/14] ata: Use 32bit DMA in AHCI for Loongson 3.
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH] MIPS: Add emulation for fpureg-mem unaligned access
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add emulation for fpureg-mem unaligned access
  • From: Lluís Batlle i Rossell <viric@xxxxxxxxxx>
• Re: [PATCH 14/14] MIPS: Loongson: Add a Loongson 3 default config file.
  • From: huacai chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH 01/14] MIPS: Loongson: Add basic Loongson 3 CPU support.
  • From: huacai chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH 00/14] MIPS: Add Loongson-3 based machines support.
  • From: huacai chen <chenhuacai@xxxxxxxxx>
• Re: [loongson-dev] Re: [PATCH] MIPS: Add emulation for fpureg-mem unaligned access
  • From: Lluís Batlle i Rossell <viric@xxxxxxxxxx>
• Re: [PATCH] MIPS: Add emulation for fpureg-mem unaligned access
  • From: Lluís Batlle i Rossell <viric@xxxxxxxxxx>
• Re: [PATCH] MIPS: Add emulation for fpureg-mem unaligned access
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: [PATCH 1/8] MIPS: BCM63XX: move flash registration out of board_bcm963xx.c
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH] MIPS: Add emulation for fpureg-mem unaligned access
  • From: Lluis Batlle i Rossell <viric@xxxxxxxxxx>
• Re: [PATCH 01/14] MIPS: Loongson: Add basic Loongson 3 CPU support.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 01/14] MIPS: Loongson: Add basic Loongson 3 CPU support.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 14/14] MIPS: Loongson: Add a Loongson 3 default config file.
  • From: LIU Qi <liuqi82@xxxxxxxxx>
• Re: [PATCH 05/14] MIPS: Loongson 3: Add HT-linked PCI support.
  • From: LIU Qi <liuqi82@xxxxxxxxx>
• Re: [PATCH 06/14] MIPS: Loongson 3: Add IRQ init and dispatch support.
  • From: LIU Qi <liuqi82@xxxxxxxxx>
• Re: [PATCH 10/14] drm/radeon: Make radeon card usable for Loongson.
  • From: LIU Qi <liuqi82@xxxxxxxxx>
• Re: [PATCH 00/14] MIPS: Add Loongson-3 based machines support.
  • From: LIU Qi <liuqi82@xxxxxxxxx>
• Re: [PATCH 09/14] ata: Use 32bit DMA in AHCI for Loongson 3.
  • From: huacai chen <chenhuacai@xxxxxxxxx>
• Re: [PATCH 07/14] MIPS: Loongson 3: Add serial port support.
  • From: huacai chen <chenhuacai@xxxxxxxxx>
• [PATCH V7 4/4] MIPS: Add defconfig for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• [PATCH V7 2/4] MIPS: Add board support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• [PATCH V7 3/4] MIPS: Add Makefile and Kconfig for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• [PATCH V7 1/4] MIPS: Add CPU support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• [PATCH V7 0/4] MIPS: Add support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH 09/14] ata: Use 32bit DMA in AHCI for Loongson 3.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 07/14] MIPS: Loongson 3: Add serial port support.
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• [PATCH 14/14] MIPS: Loongson: Add a Loongson 3 default config file.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 13/14] MIPS: Loongson 3: Add CPU Hotplug support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 12/14] MIPS: Loongson 3: Add Loongson-3 SMP support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 11/14] ALSA: Make hda sound card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 10/14] drm/radeon: Make radeon card usable for Loongson.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 09/14] ata: Use 32bit DMA in AHCI for Loongson 3.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 08/14] MIPS: Loongson: Add swiotlb to support big memory (>4GB).
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 07/14] MIPS: Loongson 3: Add serial port support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 06/14] MIPS: Loongson 3: Add IRQ init and dispatch support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 05/14] MIPS: Loongson 3: Add HT-linked PCI support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 04/14] MIPS: Loongson: Add UEFI-like firmware interface support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 03/14] MIPS: Loongson: Make Loongson 3 to use BCD format for RTC.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 02/14] MIPS: Loongson 3: Add Lemote-3A machtypes definition.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 01/14] MIPS: Loongson: Add basic Loongson 3 CPU support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• [PATCH 00/14] MIPS: Add Loongson-3 based machines support.
  • From: Huacai Chen <chenhuacai@xxxxxxxxx>
• Re: booting linux-3.3 or linux 3.4 on an SGI O2?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: booting linux-3.3 or linux 3.4 on an SGI O2?
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• MIPS: Move processing of coherency kernel parameters earlier
  • From: Shane McDonald <mcdonald.shane@xxxxxxxxx>
• Re: MIPS: Fixup ordering of micro assembler instructions.
  • From: "Steven J. Hill" <sjhill@xxxxxxxxxxxxxxxxxx>
• Re: MIPS: Fixup ordering of micro assembler instructions.
  • From: "Steven J. Hill" <sjhill@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: remove three unused headers
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [PATCH v2 5/5] MIPS: Move cache setup to setup_arch().
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] MIPS: Move cache setup to setup_arch().
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH v2 5/5] MIPS: Move cache setup to setup_arch().
  • From: Shane McDonald <mcdonald.shane@xxxxxxxxx>
• Re: [PATCH 1/8] MIPS: BCM63XX: move flash registration out of board_bcm963xx.c
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: remove three unused headers
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/8] MIPS: BCM63XX: move flash registration out of board_bcm963xx.c
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 1/8] MIPS: BCM63XX: move flash registration out of board_bcm963xx.c
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/8] MIPS: BCM63XX: move flash registration out of board_bcm963xx.c
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 1/8] MIPS: BCM63XX: move flash registration out of board_bcm963xx.c
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 0/8] Add basic support for BCM6328
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH] MIPS: remove two unused headers
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• [PATCH] MIPS: remove three unused headers
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• [PATCH 8/8] MIPS: BCM63XX: add 96328avng reference board
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH 7/8] MIPS: expose PCIe drivers for MIPS
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH 6/8] MIPS: BCM63XX: Add PCIe Support for BCM6328
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH 3/8] MIPS: BCM63XX: use the Chip ID register for identifying the SoC
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH 2/8] MIPS: BCM63XX: add flash type detection
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH 5/8] MIPS: BCM63XX: Move the PCI initialization into its own function
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH 1/8] MIPS: BCM63XX: move flash registration out of board_bcm963xx.c
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH 4/8] MIPS: BCM63XX: add basic BCM6328 CPU support
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH 0/8] Add basic support for BCM6328
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: [PATCH v2 5/5] MIPS: Move cache setup to setup_arch().
  • From: Shane McDonald <mcdonald.shane@xxxxxxxxx>
• Re: [PATCH v2 5/5] MIPS: Move cache setup to setup_arch().
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH v2 5/5] MIPS: Move cache setup to setup_arch().
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] MIPS: Remove unused smvp.h
  • From: "Steven J. Hill" <sjhill@xxxxxxxxxxxxxxxxxx>
• [PATCH] MIPS: Remove unused smvp.h
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [PATCH v2 5/5] MIPS: Move cache setup to setup_arch().
  • From: Shane McDonald <mcdonald.shane@xxxxxxxxx>
• [PATCH v2] MIPS: OCTEON: Remove some unused OCTEON_IRQ_* definitions.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 2/3] MIPS: OCTEON: Remove some unused OCTEON_IRQ_* definitions.
  • From: David Daney <david.daney@xxxxxxxxxx>
• [PATCH 3/3] MIPS:Update cavium-octeon_defconfig
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 2/3] MIPS: OCTEON: Remove some unused OCTEON_IRQ_* definitions.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 1/3] MIPS: OCTEON: Fix build error when configured without PCI_MSI
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 00/35] Cleanup firmware support across multiple platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxxxxxxxxxxxx>
• Patch for the "ug" bug
  • From: Jean-Yves Avenard <jyavenard@xxxxxxxxx>
• [PATCH 2/2] Octeon 6xxx: Add Power Throttling support for CN6xxx and above
  • From: philby john <pjohn@xxxxxxxxxx>
• [PATCH 1/2] Octeon 6xxx: Initial commit porting executive files from sdk2.3
  • From: philby john <pjohn@xxxxxxxxxx>
• Re: [PATCH v8 1/1] of/lib: Allow scripts/dtc/libfdt to be used from kernel code
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [RFC PATCH] sched/numa: do load balance between remote nodes
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• [PATCH v3 5/5] MIPS: Octeon: Use device tree to register serial ports.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v3 3/5] netdev: octeon_mgmt: Convert to use device tree.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v3 4/5] staging: octeon_ethernet: Convert to use device tree.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v3 1/5] i2c: Convert i2c-octeon.c to use device tree.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v3 2/5] netdev: mdio-octeon.c: Convert to use device tree.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v3 0/5] MIPS: OCTEON: Convert some device to use Device Tree.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v8 2/4] MIPS: Octeon: Add device tree source files.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v8 4/4] MIPS: Octeon: Setup irq_domains for interrupts.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v8 0/4] MIPS: OCTEON: Use Device Tree.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v8 3/4] MIPS: Octeon: Initialize and fixup device tree.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v8 1/4] MIPS: Don't define early_init_devtree() and device_tree_init() in prom.c for CPU_CAVIUM_OCTEON
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v8 1/1] of/lib: Allow scripts/dtc/libfdt to be used from kernel code
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 1/3] MIPS: Octeon: Add irq handlers for GPIO interrupts.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 3/3] MIPS: OCTEON: Consolidate the edge and level irq_chip structures.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 2/3] MIPS: OCTEON: Remove unneeded OCTEON_IRQ_* defines.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 0/3] MIPS: OCTEON: irq handling improvements.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH] MIPS: Octeon: Implement Octeon specific __copy_user_inatomic
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Symbol address in instructions is different from that in symbol table
  • From: yan yan <clouds.yan@xxxxxxxxx>
• Re: [PATCH 32/35] MIPS: txx9: Cleanup firmware support for txx9 platforms.
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 06/35] MIPS: ath79: Cleanup firmware support for the ath79 platform.
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• Re: [PATCH 13/35] MIPS: jz4740: Cleanup files effected by firmware changes.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 00/35] Cleanup firmware support across multiple platforms.
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 12/35] MIPS: jz4740: Cleanup firmware support for the JZ4740 platform.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 23/35] MIPS: Netlogic: Cleanup files effected by firmware changes.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 17/35] MIPS: Lasat: Cleanup files effected by firmware changes.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 13/35] MIPS: jz4740: Cleanup files effected by firmware changes.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 11/35] MIPS: Emma: Cleanup files effected by firmware changes.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 07/35] MIPS: ath79: Cleanup files effected by firmware changes.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC PATCH] sched/numa: do load balance between remote nodes
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC PATCH] sched/numa: do load balance between remote nodes
  • From: Peter Zijlstra <a.p.zijlstra@xxxxxxxxx>
• Re: [PATCH 23/35] MIPS: Netlogic: Cleanup files effected by firmware changes.
  • From: "Jayachandran C." <c.jayachandran@xxxxxxxxx>
• [RFC PATCH] sched/numa: do load balance between remote nodes
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• Re: [PATCH 15/35] MIPS: lantiq: Cleanup files effected by firmware changes.
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 34/35] MIPS: vr41xx: Cleanup firmware support for vr41xx platforms.
  • From: Yuasa Yoichi <yuasa@xxxxxxxxxxxxxx>
• Re: [PATCH 35/35] MIPS: vr41xx: Cleanup files effected by firmware changes.
  • From: Yuasa Yoichi <yuasa@xxxxxxxxxxxxxx>
• RE: [PATCH 34/35] MIPS: vr41xx: Cleanup firmware support for vr41xx platforms.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• RE: [PATCH 09/35] MIPS: Cobalt: Cleanup files effected by firmware changes.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• Re: [PATCH 34/35] MIPS: vr41xx: Cleanup firmware support for vr41xx platforms.
  • From: Yuasa Yoichi <yuasa@xxxxxxxxxxxxxx>
• RE: [PATCH 35/35] MIPS: vr41xx: Cleanup files effected by firmware changes.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• Re: [PATCH 35/35] MIPS: vr41xx: Cleanup files effected by firmware changes.
  • From: Yuasa Yoichi <yuasa@xxxxxxxxxxxxxx>
• Re: [PATCH 09/35] MIPS: Cobalt: Cleanup files effected by firmware changes.
  • From: Yuasa Yoichi <yuasa@xxxxxxxxxxxxxx>
• [PATCH 16/35] MIPS: Lasat: Cleanup firmware support for the Lasat platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 17/35] MIPS: Lasat: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 29/35] MIPS: PowerTV: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 28/35] MIPS: PowerTV: Cleanup firmware support for PowerTV platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 23/35] MIPS: Netlogic: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 25/35] MIPS: MSP71xx, Yosemite: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 15/35] MIPS: lantiq: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 33/35] MIPS: txx9: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 31/35] MIPS: RB532: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 14/35] MIPS: lantiq: Cleanup firmware support for the lantiq platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 27/35] MIPS: PNX83xx, PNX8550: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 30/35] MIPS: RB532: Cleanup firmware support for RB532 platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 18/35] MIPS: Loongson: Cleanup firmware support for the Loongson platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 11/35] MIPS: Emma: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 10/35] MIPS: Emma: Cleanup firmware support for the Emma platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 20/35] MIPS: Malta: Cleanup firmware support for the Malta platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 26/35] MIPS: PNX83xx, PNX8550: Cleanup firmware support for PNX platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 21/35] MIPS: Malta: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 22/35] MIPS: Netlogic: Cleanup firmware support for the XLR platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 32/35] MIPS: txx9: Cleanup firmware support for txx9 platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 13/35] MIPS: jz4740: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 24/35] MIPS: MSP71xx, Yosemite: Cleanup firmware support for PMC platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 12/35] MIPS: jz4740: Cleanup firmware support for the JZ4740 platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 35/35] MIPS: vr41xx: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 19/35] MIPS: Loongson: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 34/35] MIPS: vr41xx: Cleanup firmware support for vr41xx platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 09/35] MIPS: Cobalt: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 08/35] MIPS: Cobalt: Cleanup firmware support for the Cobalt platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 07/35] MIPS: ath79: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 06/35] MIPS: ath79: Cleanup firmware support for the ath79 platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 05/35] MIPS: AR7: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 04/35] MIPS: AR7: Cleanup firmware support for the AR7 platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 03/35] MIPS: Alchemy: Cleanup files effected by firmware changes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 00/35] Cleanup firmware support across multiple platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 02/35] MIPS: Alchemy: Cleanup firmware support for Alchemy platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 01/35] MIPS: Add environment variable processing code to firmware library.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: booting linux-3.3 or linux 3.4 on an SGI O2?
  • From: David Daney <david.daney@xxxxxxxxxx>
• booting linux-3.3 or linux 3.4 on an SGI O2?
  • From: Jim Faulkner <jfaulkne@xxxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: BCM63XX: be consistent in clock bits enable naming
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH] MIPS: OCTEON: Remove some unused files.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 10/27] mips, smpboot: Use generic SMP booting infrastructure
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• Re: [PATCH 10/27] mips, smpboot: Use generic SMP booting infrastructure
  • From: "Srivatsa S. Bhat" <srivatsa.bhat@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 10/27] mips, smpboot: Use generic SMP booting infrastructure
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• Submitting patches, patchwork
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 03/27] smpboot: Define and use cpu_state per-cpu variable in generic code
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 03/27] smpboot: Define and use cpu_state per-cpu variable in generic code
  • From: "Srivatsa S. Bhat" <srivatsa.bhat@xxxxxxxxxxxxxxxxxx>
• [PATCH 10/27] mips, smpboot: Use generic SMP booting infrastructure
  • From: "Srivatsa S. Bhat" <srivatsa.bhat@xxxxxxxxxxxxxxxxxx>
• Re: BCM36xx support.
  • From: Rogier Wolff <R.E.Wolff@xxxxxxxxxxxx>
• Re: BCM36xx support.
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 0/5] Add explicit support YAMON firmware.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Add explicit support YAMON firmware.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Add explicit support YAMON firmware.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 5/5] MIPS: Clean up YAMON support for MIPS Malta and SEAD-3 platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 4/5] MIPS: Clean up YAMON support for PMC Sierra platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 3/5] MIPS: Clean up YAMON support for PowerTV platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 2/5] MIPS: Clean up YAMON support for Alchemy platforms.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 1/5] MIPS: Add initial support for YAMON firmware.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 0/5] Add explicit support YAMON firmware.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v4,01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: [PATCH] MIPS: Refactor 'clear_page' and 'copy_page' functions.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Refactor 'clear_page' and 'copy_page' functions.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Refactor 'clear_page' and 'copy_page' functions.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 3/9] MIPS: Add support for microMIPS exception handling.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 1/9] MIPS: Add microMIPS breakpoints and DSP support.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 2/9] MIPS: Add support for microMIPS instructions.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 0/9 v3] MIPS: BCM63XX: add support for SPI
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH] MIPS: fix duplicate config ARCH_SPARSEMEM_ENABLE
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: fix BCMA_DRIVER_PCI_HOSTMODE config dependencies
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] MIPS: Clean-up GIC and vectored interrupts.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: fix duplicate config ARCH_SPARSEMEM_ENABLE
  • From: Yoichi Yuasa <yuasa@xxxxxxxxxxxxxx>
• [PATCH] MIPS: fix BCMA_DRIVER_PCI_HOSTMODE config dependencies
  • From: Yoichi Yuasa <yuasa@xxxxxxxxxxxxxx>
• RE: [PATCH V5 16/17] SPI: MIPS: lantiq: add FALCON spi driver
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH V5 16/17] SPI: MIPS: lantiq: add FALCON spi driver
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• RE: [PATCH V5 16/17] SPI: MIPS: lantiq: add FALCON spi driver
  • From: "Langer Thomas (LQDE CPE AE SW)" <thomas.langer@xxxxxxxxxx>
• Re: [PATCH] MIPS: Add support for the MIPS32 4Kc family I/D caches.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add support for the MIPS32 4Kc family I/D caches.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 6/8] MIPS: call set_cpu_online() on the uping cpu with irq disabled
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• Re: [PATCH 6/8] MIPS: call set_cpu_online() on the uping cpu with irq disabled
  • From: "Srivatsa S. Bhat" <srivatsa.bhat@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add support for the MIPS32 4Kc family I/D caches.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH V5 16/17] SPI: MIPS: lantiq: add FALCON spi driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH V5 16/17] SPI: MIPS: lantiq: add FALCON spi driver
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• [PATCH] MIPS: Properly align the .data..init_task section.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH v2] Update all configuration files for new features.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Update all configuration files for new features.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH v2] Update all configuration files for new features.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 4/4] MIPS: Optimise core library function 'strnlen' for microMIPS.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 3/4] MIPS: Optimise core library function 'strlen' for microMIPS.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 2/4] MIPS: Optimise core library function 'strncpy' for microMIPS.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 1/4] MIPS: Optimise core library function 'memset' for microMIPS.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 0/4] Optimise core MIPS library functions for microMIPS.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 9/9] MIPS: Add microMIPS configuration option.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 8/9] MIPS: Fixup ordering of micro assembler instructions.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 7/9] MIPS: Work-around microMIPS GNU assembler bug.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 6/9] MIPS: Support microMIPS/MIPS16e floating point.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 5/9] MIPS: Support microMIPS/MIPS16e unaligned accesses.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 3/9] MIPS: Add support for microMIPS exception handling.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 4/9] MIPS: Support microMIPS/MIPS16e handling of delay slots.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 2/9] MIPS: Add support for microMIPS instructions.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 1/9] MIPS: Add microMIPS breakpoints and DSP support.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 0/9] Add support for pure microMIPS kernel.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH] MIPS: Refactor 'clear_page' and 'copy_page' functions.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: [PATCH] swiotlb: add "dma_attrs" argument to alloc and free, to match dma_map_ops
  • From: Alessandro Rubini <rubini@xxxxxxxxx>
• Re: [PATCH] swiotlb: add "dma_attrs" argument to alloc and free, to match dma_map_ops
  • From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
• [PATCH] MIPS: Add support for the M14KEc core.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: [PATCH] swiotlb: add "dma_attrs" argument to alloc and free, to match dma_map_ops
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [v2,4/5] MIPS: Malta PCI changes for PCI 2.1 compatibility and conflicts.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• [PATCH] swiotlb: add "dma_attrs" argument to alloc and free, to match dma_map_ops
  • From: Alessandro Rubini <rubini@xxxxxxxxx>
• Re: [v2,4/5] MIPS: Malta PCI changes for PCI 2.1 compatibility and conflicts.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Fix race condition with FPU thread task flag during context switch.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [PATCH v2] Fix race condition with FPU thread task flag during context switch.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• Re: [PATCH v2] Fix race condition with FPU thread task flag during context switch.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v2] Fix race condition with FPU thread task flag during context switch.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• RE: [PATCH v2] Fix race condition with FPU thread task flag during context switch.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• Re: [PATCH v2] Fix race condition with FPU thread task flag during context switch.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: fix/enrich 34K APRP (APSP) functionalities
  • From: Deng-Cheng Zhu <dczhu@xxxxxxxx>
• Re: handle_sys question
  • From: Songmao Tian <kingkongmao@xxxxxxxxx>
• [PATCH v2,4/9] MIPS: Add microMIPS breakpoints and DSP support.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: [PATCH 1/3] of: Add prefix parameter to of_modalias_node().
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 1/3] of: Add prefix parameter to of_modalias_node().
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: fix/enrich 34K APRP (APSP) functionalities
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] of: Add prefix parameter to of_modalias_node().
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: handle_sys question
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 1/3] of: Add prefix parameter to of_modalias_node().
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 5/5] netdev/phy: Add driver for Cortina cs4321 quad 10G PHY.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 0/5] netdev/phy: 10G PHY support.
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] netdev/phy: Add driver for Cortina cs4321 quad 10G PHY.
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] netdev/phy: Add driver for Broadcom BCM87XX 10G Ethernet PHYs
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 4/5] netdev/phy: Add driver for Broadcom BCM87XX 10G Ethernet PHYs
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 4/5] netdev/phy: Add driver for Broadcom BCM87XX 10G Ethernet PHYs
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 5/5] netdev/phy: Add driver for Cortina cs4321 quad 10G PHY.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 2/5] netdev/phy/of: Handle IEEE802.3 clause 45 Ethernet PHYs in of_mdiobus_register()
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 1/5] netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 4/5] netdev/phy: Add driver for Broadcom BCM87XX 10G Ethernet PHYs
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 3/5] netdev/phy/of: Add more methods for binding PHY devices to drivers.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 0/5] netdev/phy: 10G PHY support.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] MIPS: Add support for the MIPS32 4Kc family I/D caches.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 4/9] MIPS: Add microMIPS breakpoints and DSP support.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• handle_sys question
  • From: Songmao Tian <kingkongmao@xxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: fix/enrich 34K APRP (APSP) functionalities
  • From: Deng-Cheng Zhu <dczhu@xxxxxxxx>
• Re: [PATCH 6/8] MIPS: call set_cpu_online() on the uping cpu with irq disabled
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• Re: [PATCH 6/8] MIPS: call set_cpu_online() on the uping cpu with irq disabled
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: fix/enrich 34K APRP (APSP) functionalities
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: bcm63xx: kbuild: remove -Werror
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v3,2/9] MIPS: Optimise core library functions for microMIPS.
  • From: David Daney <david.daney@xxxxxxxxxx>
• [PATCH v3,2/9] MIPS: Optimise core library functions for microMIPS.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v3,08/10] MIPS: MIPS32R2 optimisations for pipeline stalls and code size.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• RE: [PATCH v2,1/5] MIPS: Add support for the 1074K core.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• [PATCH] MIPS: Add support for the MIPS32 4Kc family I/D caches.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH] MIPS: Remove dead code related to 1004K oprofile support.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v3,1/5] MIPS: Add support for the 1074K core.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: [PATCH 6/8] MIPS: call set_cpu_online() on the uping cpu with irq disabled
  • From: "Srivatsa S. Bhat" <srivatsa.bhat@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/8] MIPS: call set_cpu_online() on the uping cpu with irq disabled
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 8/8] MIPS: sync-r4k: remove redundant irq operation
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 7/8] MIPS: smp: Warn on too early irq enable
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 6/8] MIPS: call set_cpu_online() on the uping cpu with irq disabled
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 5/8] MIPS: call ->smp_finish() a little late
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 4/8] MIPS: Yosemite: delay irq enable to ->smp_finish()
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 3/8] MIPS: SMTC: delay irq enable to ->smp_finish()
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 2/8] MIPS: BMIPS: delay irq enable to ->smp_finish()
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 1/8] MIPS: Octeon: delay enable irq to ->smp_finish()
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [V1 PATCH 0/8] patchset focus on MIPS SMP woes
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: fix/enrich 34K APRP (APSP) functionalities
  • From: Deng-Cheng Zhu <dczhu@xxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: fix/enrich 34K APRP (APSP) functionalities
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• [PATCH V5 16/17] SPI: MIPS: lantiq: add FALCON spi driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH V4 16/17] SPI: MIPS: lantiq: add FALCON spi driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V4 16/17] SPI: MIPS: lantiq: add FALCON spi driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 3/3] eeprom/of: Add device tree bindings to at25.
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 1/3] of: Add prefix parameter to of_modalias_node().
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 1/3] of: Add prefix parameter to of_modalias_node().
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 2/2] spi: Add SPI master controller for OCTEON SOCs.
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 2/2] spi: Add SPI master controller for OCTEON SOCs.
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: OCTEON: Add register definitions for SPI host hardware.
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH V3 16/17] SPI: MIPS: lantiq: add FALCON spi driver
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH] mips: set ST0_MX flag for MDMX
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] MIPS: Octeon: Use device tree to register serial ports.
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 4/5] staging: octeon_ethernet: Convert to use device tree.
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 2/5] netdev: mdio-octeon.c: Convert to use device tree.
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 1/5] i2c: Convert i2c-octeon.c to use device tree.
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v8 2/4] MIPS: Octeon: Setup irq_domains for interrupts.
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH V4 1/3] GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: fix/enrich 34K APRP (APSP) functionalities
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH V3 17/17] MIPS: lantiq: remove orphaned code
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V4 2/3] GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V4 3/3] GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V4 1/3] GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: fix/enrich 34K APRP (APSP) functionalities
  • From: Deng-Cheng Zhu <dczhu@xxxxxxxx>
• Re: [PATCH] OF: PCI: const usage needed by MIPS
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH 2/2] gpio/MIPS/OCTEON: Add a driver for OCTEON's on-chip GPIO pins.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 2/2] gpio/MIPS/OCTEON: Add a driver for OCTEON's on-chip GPIO pins.
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH V3 3/3] GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH V3 2/3] GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH V3 1/3] GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 0/8] patchset focus on MIPS SMP woes
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 0/8] patchset focus on MIPS SMP woes
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: fix/enrich 34K APRP (APSP) functionalities
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 6/8] MIPS: call set_cpu_online() on the uping cpu with irq disabled
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 7/8] MIPS: smp: Warn on too early irq enable
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 8/8] MIPS: sync-r4k: remove redundant irq operation
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 7/8] MIPS: smp: Warn on too early irq enable
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 6/8] MIPS: call set_cpu_online() on the uping cpu with irq disabled
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 5/8] MIPS: call ->smp_finish() a little late
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 4/8] MIPS: Yosemite: delay irq enable to ->smp_finish()
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 3/8] MIPS: SMTC: delay irq enable to ->smp_finish()
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 2/8] MIPS: BMIPS: delay irq enable to ->smp_finish()
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 1/8] MIPS: Octeon: delay enable irq to ->smp_finish()
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 0/8] patchset focus on MIPS SMP woes
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH v2 2/2] MIPS: enable CPS multicore APRP (APSP)
  • From: Deng-Cheng Zhu <dczhu@xxxxxxxx>
• [PATCH v2 1/2] MIPS: fix/enrich 34K APRP (APSP) functionalities
  • From: Deng-Cheng Zhu <dczhu@xxxxxxxx>
• [PATCH v2 0/2] MIPS: enable APRP (APSP) and add features - v2
  • From: Deng-Cheng Zhu <dczhu@xxxxxxxx>
• Re: [PATCH] mips: fix endless loop when processing signals for kernel tasks
  • From: Dmitry Adamushko <dmitry.adamushko@xxxxxxxxx>
• [PATCH V3 3/3] GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V3 2/3] GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V3 1/3] GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 3/4] kbuild: link of vmlinux moved to a script
  • From: Michal Marek <mmarek@xxxxxxx>
• Re: [PATCH 0/8] ssb/bcma/bcm47xx: extend boardinfo and sprom
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 0/8] ssb/bcma/bcm47xx: extend boardinfo and sprom
  • From: "John W. Linville" <linville@xxxxxxxxxxxxx>
• [PATCH V4 06/17] MIPS: lantiq: convert dma to platform driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [RESEND PATCH V2 06/17] MIPS: lantiq: convert dma to platform driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [RESEND PATCH V2 06/17] MIPS: lantiq: convert dma to platform driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 3/3] eeprom/of: Add device tree bindings to at25.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH V3 06/17] MIPS: lantiq: convert dma to platform driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] MIPS: Make set_handler() __cpuinit.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RESEND PATCH V2 06/17] MIPS: lantiq: convert dma to platform driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RESEND PATCH V2 14/17] MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• [PATCH v2 5/5] MIPS: Move cache setup to setup_arch().
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 4/5] MIPS: Use board_cache_error_setup for r4k cache error handler setup.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 3/5] MIPS: Octeon: Use board_cache_error_setup for cache error handler setup.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 1/5] MIPS: Introduce board_cache_error_setup() hook.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 0/5] MIPS: Move cache setup earlier.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 2/5] MIPS: Make set_handler() __cpuinit.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 2/2] spi: Add SPI master controller for OCTEON SOCs.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: OCTEON: Add register definitions for SPI host hardware.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH V3 16/17] SPI: MIPS: lantiq: add FALCON spi driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [RESEND PATCH V2 10/17] SERIAL: MIPS: lantiq: implement OF support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [RESEND PATCH V2 10/17] SERIAL: MIPS: lantiq: implement OF support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH V2 16/17] SPI: MIPS: lantiq: add FALCON spi driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [RESEND PATCH V2 16/17] SPI: MIPS: lantiq: add FALCON spi driver
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: [PATCH 2/2] spi: Add SPI master controller for OCTEON SOCs.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [RESEND PATCH V2 12/17] NET: MIPS: lantiq: implement OF support inside the etop driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 14/17] MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 15/17] MIPS: lantiq: implement support for FALCON soc
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 17/17] MIPS: lantiq: remove orphaned code
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 16/17] SPI: MIPS: lantiq: add FALCON spi driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 13/17] MTD: MIPS: lantiq: implement OF support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 11/17] watchdog: MIPS: lantiq: implement OF support and minor fixes
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [RESEND PATCH V2 10/17] SERIAL: MIPS: lantiq: implement OF support
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• [RESEND PATCH V2 10/17] SERIAL: MIPS: lantiq: implement OF support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 09/17] GPIO: MIPS: lantiq: convert gpio-ebu to OF and move it to subsystem
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 08/17] GPIO: MIPS: lantiq: convert gpio-stp to OF and move it to subsystem
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 07/17] MIPS: pci: convert lantiq driver to OF
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 06/17] MIPS: lantiq: convert dma to platform driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 05/17] MIPS: lantiq: implement support for clkdev api
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 02/17] OF: MIPS: lantiq: implement OF support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 03/17] OF: MIPS: lantiq: implement irq_domain support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 04/17] MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [RESEND PATCH V2 01/17] MIPS: lantiq: drop mips_machine support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 12/14] MTD: MIPS: lantiq: implement OF support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 12/14] MTD: MIPS: lantiq: implement OF support
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH 2/2] spi: Add SPI master controller for OCTEON SOCs.
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Kbuild: remove -Werror
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: [PATCH v2,1/5] MIPS: Add support for the 1074K core.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] OF: PCI: const usage needed by MIPS
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 02/14] OF: MIPS: lantiq: implement OF support
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• [PATCH 3/3] eeprom/of: Add device tree bindings to at25.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 1/3] of: Add prefix parameter to of_modalias_node().
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 2/3] spi: Use consistent MODALIAS values.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 0/3] of/spi/eeprom: Configure at25 from device tree and autoload its driver.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 1/2] MIPS: OCTEON: Add register definitions for SPI host hardware.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 2/2] spi: Add SPI master controller for OCTEON SOCs.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH 0/2] MIPS/spi: New driver for SPI master controller for OCTEON SOCs.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH v2,08/10] MIPS: MIPS32R2 optimisations for pipeline stalls and code size.
  • From: David Daney <david.daney@xxxxxxxxxx>
• [PATCH v3,04/10] Add the MIPS32R2 'ins' and 'ext' instructions for use by the kernel's micro-assembler.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2,08/10] MIPS: MIPS32R2 optimisations for pipeline stalls and code size.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v3] Add support for MIPS64R2 on the Malta platform:
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v4] Revert fixrange_init() limiting to the FIXMAP region.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: [PATCH V2 04/14] OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v2] Add MIPS64R2 core support.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [PATCH v2] Add MIPS64R2 core support.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• Re: [PATCH v2,04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH v2] Add MIPS64R2 core support.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v2] Add MIPS64R2 core support.
  • From: "Yegoshin, Leonid" <yegoshin@xxxxxxxx>
• Re: [PATCH v2] Add MIPS64R2 core support.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v2] Add MIPS64R2 core support.
  • From: "Yegoshin, Leonid" <yegoshin@xxxxxxxx>
• Re: [PATCH v2] Add MIPS64R2 core support.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v3] Revert fixrange_init() limiting to the FIXMAP region.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH v3] Revert fixrange_init() limiting to the FIXMAP region.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: [PATCH 12/14] MTD: MIPS: lantiq: implement OF support
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH 12/14] MTD: MIPS: lantiq: implement OF support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 12/14] MTD: MIPS: lantiq: implement OF support
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: SMP MIPS and Linux 3.2
  • From: JoeJ <tttechmail@xxxxxxxxx>
• RE: [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxxxx>
• [PATCH] MIPS: Fixup ordering of micro assembler instructions.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH] MIPS: Work-around microMIPS GNU assembler bug.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2] Revert fixrange_init() limiting to the FIXMAP region.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH] Update all configuration files for new features.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2] Add MIPS64R2 core support.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2] Fix race condition with FPU thread task flag during context switch.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v3,6/9] MIPS: Add support for microMIPS exception handling.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2,5/9] MIPS: Add support for microMIPS instructions.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH] MIPS: Add support for microMIPS instructions.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 4/9] MIPS: Add microMIPS breakpoints and DSP support.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v3,3/9] MIPS: Add support for the M14KE core.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2,2/9] MIPS: Optimise core library functions for microMIPS.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2,1/9] MIPS: Add microMIPS configuration option.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2,08/10] MIPS: MIPS32R2 optimisations for pipeline stalls and code size.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v3,06/10] MIPS: Code formatting fixes.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2,04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH 03/10] MIPS: Add support for the M14Kc core.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH] MIPS: Add support for the M14Kc core.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2,02/10] MIPS: Changes to configuration files for SEAD-3 platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v3,01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2,5/5] MIPS: Add option to disable software I/O coherency.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2,3/5] MIPS: Updates to SMTC and SMVP support for threaded cores.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• [PATCH v2,1/5] MIPS: Add support for the 1074K core.
  • From: "Steven J. Hill" <sjhill@xxxxxxxx>
• Re: [PATCH 3/4] kbuild: link of vmlinux moved to a script
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [PATCH V2 04/14] OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH V2 04/14] OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 03/14] OF: MIPS: lantiq: implement irq_domain support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 3/4] kbuild: link of vmlinux moved to a script
  • From: Michal Marek <mmarek@xxxxxxx>
• Re: [PATCH 3/4] kbuild: link of vmlinux moved to a script
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 3/4] kbuild: link of vmlinux moved to a script
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [PATCH] mips: set ST0_MX flag for MDMX
  • From: Matt Turner <mattst88@xxxxxxxxx>
• [PATCH RFC] mmc: Add host driver for OCTEON MMC controller.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] mips: set ST0_MX flag for MDMX
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• RE: [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• Re: [PATCH 03/14] OF: MIPS: lantiq: implement irq_domain support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 03/14] OF: MIPS: lantiq: implement irq_domain support
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 04/14] OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 04/14] OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 04/14] OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 04/14] OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 04/14] OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 04/14] OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] mips: bcm63xx: fix compilation problems
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH 14/14] MIPS: Netlogic: Add XLP SoC devices in FDT
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 13/14] MIPS: Netlogic: Add IRQ mappings for more devices
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 11/14] MIPS: Netlogic: XLP PCIe controller support.
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 08/14] MIPS: Netlogic: Platform changes for XLS USB
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 09/14] MIPS: Netlogic: Platform NAND/NOR flash support
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 10/14] MIPS: Netlogic: Platform changes for XLR/XLS I2C
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 12/14] MIPS: Netlogic: USB support for XLP
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 06/14] MIPS: Netlogic: SMP wakeup code update
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 07/14] MIPS: Netlogic: Remove NETLOGIC_ prefix
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 02/14] MIPS: Netlogic: MSI enable fix for XLS
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 03/14] MIPS: Netlogic: Remove unused pcibios_fixups
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 04/14] MIPS: Netlogic: Fix TLB size of boot CPU.
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH UPDATED 00/14] Netlogic XLR/XLS/XLP updates.
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 01/14] MIPS: Netlogic: Fix PCIX irq on XLR chips
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 05/14] MIPS: Netlogic: Update comments in smpboot.S
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• Re: xway_nand does not build
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: xway_nand does not build
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• RE: [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: xway_nand does not build
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: xway_nand does not build
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: xway_nand does not build
  • From: John Crispin <blogic@xxxxxxxxxxx>
• xway_nand does not build
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH] mtd: xway_nand: add OF dependency
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH] mtd: xway_nand: add OF dependency
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH] OF: PCI: const usage needed by MIPS
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH] mips: bcm63xx: fix compilation problems
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
  • From: Shinya Kuribayashi <shinya.kuribayashi.px@xxxxxxxxxxx>
• Re: [PATCH v6 3/3] netdev/of/phy: Add MDIO bus multiplexer driven by GPIO lines.
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v6 2/3] netdev/of/phy: Add MDIO bus multiplexer support.
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/3] netdev/of/phy: New function: of_mdio_find_bus().
  • From: David Miller <davem@xxxxxxxxxxxxx>
• RE: [PATCH 01/10] MIPS: Add core files for MIPS SEAD-3 development platform.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• Re: [PATCH] Revert "MIPS: cache: Provide cache flush operations for XFS"
  • From: Leonid Yegoshin <yegoshin@xxxxxxxx>
• RE: [PATCH] Revert "MIPS: cache: Provide cache flush operations for XFS"
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• Re: [PATCH] OF: PCI: const usage needed by MIPS
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• RE: [PATCH 04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions.
  • From: "Hill, Steven" <sjhill@xxxxxxxx>
• Re: [PATCH 04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Kbuild: remove -Werror
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Kbuild: remove -Werror
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Kbuild: remove -Werror
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: bcm63xx: kbuild: remove -Werror
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Kbuild: remove -Werror
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH 2/2] MIPS: bcm63xx: kbuild: remove -Werror
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Kbuild: remove -Werror
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH v2,4/9] MIPS: Add microMIPS versions of breakpoints, BUG, etc.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH v2,3/9] MIPS: Add support for the M14KE core.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH v2,03/10] MIPS: Add support for the M14K core.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• [PATCH] mips: include export.h in for EXPORT_SYMBOL in ops-loongson2.c
  • From: Matt Turner <mattst88@xxxxxxxxx>
• Re: [PATCH] mips: set ST0_MX flag for MDMX
  • From: Matt Turner <mattst88@xxxxxxxxx>
• Re: [Bug-fix] Fix-the-backtrcae-problem-Ftrace is enable
  • From: Akhilesh Kumar <akhilesh.lxr@xxxxxxxxx>
• Re: [PATCH 04/14] OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH] MIPS: Handle huge pages with 64KB base page size.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [Bug-fix] Fix-the-backtrcae-problem-Ftrace is enable
  • From: Akhilesh Kumar <akhilesh.lxr@xxxxxxxxx>
• pci and pcie coexistence
  • From: John Crispin <john@xxxxxxxxxxx>
• Re: [PATCH 11/14] watchdog: MIPS: lantiq: implement OF support and minor fixes
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• [PATCH 12/14] MTD: MIPS: lantiq: implement OF support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 13/14] NET: MIPS: lantiq: implement OF support inside the etop driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 14/14] MIPS: lantiq: remove orphaned code
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 11/14] watchdog: MIPS: lantiq: implement OF support and minor fixes
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 10/14] SERIAL: MIPS: lantiq: implement OF support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 04/14] OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 09/14] GPIO: MIPS: lantiq: convert gpio-ebu to OF and move it to subsystem
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 08/14] GPIO: MIPS: lantiq: convert gpio-stp to OF and move it to subsystem
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 07/14] MIPS: pci: convert lantiq driver to OF
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 06/14] MIPS: lantiq: convert dma to platform driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 05/14] MIPS: lantiq: implement support for clkdev api
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 03/14] OF: MIPS: lantiq: implement irq_domain support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 02/14] OF: MIPS: lantiq: implement OF support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 01/14] MIPS: lantiq: drop mips_machine support
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH] mips: set ST0_MX flag for MDMX
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] OF: PCI: const usage needed by MIPS
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V4 02/14] MIPS: pci: parse memory ranges from devicetree
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH] OF: PCI: const usage needed by MIPS
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] OF: PCI: const usage needed by MIPS
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• [PATCH] mips: set ST0_MX flag for MDMX
  • From: Matt Turner <mattst88@xxxxxxxxx>
• Re: [PATCH 02/14] MIPS: pci: parse memory ranges from devicetree
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 02/14] MIPS: pci: parse memory ranges from devicetree
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 02/14] MIPS: pci: parse memory ranges from devicetree
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH v2 1/5] i2c: Convert i2c-octeon.c to use device tree.
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH v6 3/3] netdev/of/phy: Add MDIO bus multiplexer driven by GPIO lines.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v6 2/3] netdev/of/phy: Add MDIO bus multiplexer support.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v6 1/3] netdev/of/phy: New function: of_mdio_find_bus().
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v6 0/3] netdev/of/phy: MDIO bus multiplexer support.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH V2 02/14] MIPS: pci: parse memory ranges from devicetree
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH V3 01/14] MIPS: make oprofile use cp0_perfcount_irq if it is set
  • From: John Crispin <blogic@xxxxxxxxxxx>
• NFS data corruption on 3.4
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH V2 12/14] MIPS: lantiq: fix cmdline parsing
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 11/14] MIPS: lantiq: fix early printk
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 09/14] MIPS: lantiq: enable oprofile support on lantiq targets
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 08/14] MIPS: lantiq: clear all irqs properly on boot
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 05/14] MIPS: parse chosen node on boot
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 02/14] MIPS: pci: parse memory ranges from devicetree
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 01/14] MIPS: make oprofile use cp0_perfcount_irq if it is set
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 04/14] MIPS: Add helper function to allow platforms to point at a DTB.
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 3/3] mtd: nand: kill NAND_NO_AUTOINCR option
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• [PATCH] usb: [MIPS] fix unresolved err() reference in host/ohci-au1xxx.c
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• [PATCH] usb: [MIPS] fix unresolved err() reference in host/ohci-pnx8550.c
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• [RFC][PATCH 5/5] sched: Rewrite the CONFIG_NUMA sched domain support
  • From: Peter Zijlstra <a.p.zijlstra@xxxxxxxxx>
• Re: [PATCH] OF: PCI: const usage needed by MIPS
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 02/14] MIPS: pci: parse memory ranges from devicetree
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 2/9] MIPS: Optimise core library functions for microMIPS.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 08/14] MIPS: lantiq: clear all irqs properly on boot
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 04/10] MIPS: Add micro-assembler support for 'ins' and 'ext' instructions.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] MIPS: Add support for the 1074K core.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 08/14] MIPS: lantiq: clear all irqs properly on boot
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 04/14] MIPS: Add helper function to allow platforms to point at a DTB.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] OF: PCI: const usage needed by MIPS
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH] OF: PCI: const usage needed by MIPS
  • From: John Crispin <blogic@xxxxxxxxxxx>