Added Kconfig options include: Loongson-3 CPU and machine definition, UEFI-like firmware interface, HT-linked PCI, big memory support, etc. Signed-off-by: Huacai Chen <chenhc@xxxxxxxxxx> Signed-off-by: Hongliang Tao <taohl@xxxxxxxxxx> Signed-off-by: Hua Yan <yanh@xxxxxxxxxx> --- arch/mips/Kconfig | 22 ++++++++++++++++++ arch/mips/loongson/Kconfig | 52 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 74 insertions(+), 0 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index c179461..da2b1e5 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1544,6 +1544,16 @@ config CPU_LOONGSON2 select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM +config CPU_LOONGSON3 + bool "Loongson 3 CPU" + depends on SYS_HAS_CPU_LOONGSON3 + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + help + The Loongson 3 processor implements the MIPS III instruction set + with many extensions. + config CPU_BMIPS bool select CPU_MIPS32 @@ -1562,6 +1572,9 @@ config SYS_HAS_CPU_LOONGSON2F select CPU_SUPPORTS_ADDRWINCFG if 64BIT select CPU_SUPPORTS_UNCACHED_ACCELERATED +config SYS_HAS_CPU_LOONGSON3 + bool + config SYS_HAS_CPU_MIPS32_R1 bool @@ -2361,6 +2374,15 @@ config PCI your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, say Y, otherwise N. +config HT_PCI + bool "Support for HT-linked PCI" + select PCI_DOMAINS + help + Loongson family machines use Hyper-Transport bus for inter-core + connection and device connection. The PCI bus is a subordinate + linked at HT. Choose Y unless you are using Loongson 2E/2F based + machines. + config PCI_DOMAINS bool diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index aca93ee..9a591ae 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -58,6 +58,33 @@ config LEMOTE_MACH2F These family machines include fuloong2f mini PC, yeeloong2f notebook, LingLoong allinone PC and so forth. + +config LEMOTE_MACH3A + bool "Lemote Loongson 3A family machines" + select ARCH_SPARSEMEM_ENABLE + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select GENERIC_HARDIRQS_NO__DO_IRQ + select BOOT_ELF32 + select BOARD_SCACHE + select CSRC_R4K + select CEVT_R4K + select CPU_HAS_WB + select HW_HAS_PCI + select ISA + select I8259 + select IRQ_CPU + select SYS_HAS_CPU_LOONGSON3 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select LOONGSON_MC146818 + select UEFI_FIRMWARE_INTERFACE + help + Lemote Loongson 3A family machines utilize the 3A revision of + Loongson processor and RS780/SBX00 chipset. endchoice config CS5536 @@ -85,8 +112,33 @@ config LOONGSON_UART_BASE default y depends on EARLY_PRINTK || SERIAL_8250 +config LOONGSON_BIGMEM + bool "Soft IOMMU Support for Big Memory (>4GB)" + depends on CPU_LOONGSON3 + select SWIOTLB + select ZONE_DMA32 + +config IOMMU_HELPER + bool + +config NEED_SG_DMA_LENGTH + bool + +config SWIOTLB + bool + select IOMMU_HELPER + select NEED_SG_DMA_LENGTH + select NEED_DMA_MAP_STATE + config LOONGSON_MC146818 bool default n +config ARCH_SPARSEMEM_ENABLE + bool + select SPARSEMEM_STATIC + +config UEFI_FIRMWARE_INTERFACE + bool + endif # MACH_LOONGSON -- 1.7.7.3
