Re: [PATCH 4/5] netdev/phy: Add driver for Broadcom BCM87XX 10G Ethernet PHYs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/22/2012 11:17 AM, Joe Perches wrote:
On Tue, 2012-05-22 at 10:59 -0700, David Daney wrote:
From: David Daney<david.daney@xxxxxxxxxx>

trivia:

As long as we are splitting hairs...


diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c
[]
@@ -0,0 +1,237 @@

+static int bcm87xx_of_reg_init(struct phy_device *phydev)
+{
+	const __be32 *paddr;
+	int len, i, ret;
+
+	if (!phydev->dev.of_node)
+		return 0;
+
+	paddr = of_get_property(phydev->dev.of_node,
+				"broadcom,c45-reg-init",&len);
+	if (!paddr || len<  (4 * sizeof(*paddr)))
+		return 0;
+
+	ret = 0;
+	len /= sizeof(*paddr);
+	for (i = 0; i<  len - 3; i += 4) {
+		u16 devid = be32_to_cpup(paddr + i);
+		u16 reg = be32_to_cpup(paddr + i + 1);
+		u16 mask = be32_to_cpup(paddr + i + 2);
+		u16 val_bits = be32_to_cpup(paddr + i + 3);
+		int val;

These might read better as

	len /= 4;

Where did the magic value of 4 come from?

	for (i = 0; i<  len; i++) {
		u16 devid	= be32_to_cpu(*paddr++);
		u16 reg		= be32_to_cpu(*paddr++);
		u16 mask	= be32_to_cpu(*paddr++);
		u16 val_bits	= be32_to_cpu(*paddr++);

Is the main problem that they didn't align, or that the index was explicit instead of implicit?




[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux