[PATCH 04/14] MIPS: Netlogic: Fix TLB size of boot CPU.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Starting other threads in the core will change the number of
TLB entries of a CPU.  Re-calculate current_cpu_data.tlbsize
on the boot cpu after enabling and waking up other threads.

The secondary CPUs do not need this logic because the threads
are enabled on the secondary cores at wakeup and before cpu_probe.

Signed-off-by: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
---
 arch/mips/netlogic/xlp/setup.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index acb677a..b3df7c2 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -82,8 +82,10 @@ void __init prom_free_prom_memory(void)
 
 void xlp_mmu_init(void)
 {
+	/* enable extended TLB and Large Fixed TLB */
 	write_c0_config6(read_c0_config6() | 0x24);
-	current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
+	/* set page mask of Fixed TLB in config7 */
 	write_c0_config7(PM_DEFAULT_MASK >>
 		(13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
 }
@@ -100,6 +102,10 @@ void __init prom_init(void)
 	nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1));
 #ifdef CONFIG_SMP
 	nlm_wakeup_secondary_cpus(0xffffffff);
+
+	/* update TLB size after waking up threads */
+	current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
 	register_smp_ops(&nlm_smp_ops);
 #endif
 }
-- 
1.7.9.5





[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux