Re: [PATCH V5 09/18] MIPS: Loongson: Add swiotlb to support big memory (>4GB).

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 16, 2012 at 4:24 AM, Ralf Baechle <ralf@xxxxxxxxxxxxxx> wrote:
> On Mon, Aug 13, 2012 at 01:54:47PM -0400, Konrad Rzeszutek Wilk wrote:
>
>> > +static void *loongson_dma_alloc_coherent(struct device *dev, size_t size,
>> > +                           dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
>> > +{
>> > +   void *ret;
>> > +
>> > +   if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
>> > +           return ret;
>> > +
>> > +   /* ignore region specifiers */
>> > +   gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
>> > +
>> > +#ifdef CONFIG_ZONE_DMA
>> > +   if (dev == NULL)
>> > +           gfp |= __GFP_DMA;
>>
>> When would this happen? dev == NULL?
>
> A legacy (ISA) device driver.  Some of the Loongsons have some kind of
> southbridge which incorporates legacy devices though of the top of my
> head I'm not sure which if any of these are actually being used.  Huacai?
ISA driver isn't used now, but I think keep "dev == NULL" here has no
side effect.
BTW, "dev == NULL" only happend in ISA case?  I use "grep
pci_alloc_consistent drivers/ -rwI | grep NULL" and also get some
lines.

>
>> > +   else if (dev->coherent_dma_mask <= DMA_BIT_MASK(24))
>> > +           gfp |= __GFP_DMA;
>> > +   else
>> > +#endif
>> > +#ifdef CONFIG_ZONE_DMA32
>> > +   if (dev->coherent_dma_mask <= DMA_BIT_MASK(32))
>> > +           gfp |= __GFP_DMA32;
>> > +   else
>>
>> Why the 'else'
>> > +#endif
>> > +   ;
>>
>> why?
>> > +   gfp |= __GFP_NORETRY;
>> > +
>> > +   ret = swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
>> > +   mb();
>>
>> Why the 'mb()' ? Can you just do
>>       return swiotlb_alloc_coherent(...)
>>
>> > +   return ret;
>> > +}
>> > +
>> > +static void loongson_dma_free_coherent(struct device *dev, size_t size,
>> > +                           void *vaddr, dma_addr_t dma_handle, struct dma_attrs *attrs)
>> > +{
>> > +   int order = get_order(size);
>> > +
>> > +   if (dma_release_from_coherent(dev, order, vaddr))
>> > +           return;
>> > +
>> > +   swiotlb_free_coherent(dev, size, vaddr, dma_handle);
>> > +}
>> > +
>> > +static dma_addr_t loongson_dma_map_page(struct device *dev, struct page *page,
>> > +                           unsigned long offset, size_t size,
>> > +                           enum dma_data_direction dir,
>> > +                           struct dma_attrs *attrs)
>> > +{
>> > +   dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
>> > +                                   dir, attrs);
>> > +   mb();
>>
>> Please do 'return swiotlb_map_page(..)'..
>>
>> But if you are doing that why don't you just set the dma_ops.map_page = swiotlb_map_page
>> ?
>>
>>
>> > +   return daddr;
>> > +}
>> > +
>> > +static int loongson_dma_map_sg(struct device *dev, struct scatterlist *sg,
>> > +                           int nents, enum dma_data_direction dir,
>> > +                           struct dma_attrs *attrs)
>> > +{
>> > +   int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, NULL);
>> > +   mb();
>> > +
>> > +   return r;
>> > +}
>> > +
>> > +static void loongson_dma_sync_single_for_device(struct device *dev,
>> > +                           dma_addr_t dma_handle, size_t size,
>> > +                           enum dma_data_direction dir)
>> > +{
>> > +   swiotlb_sync_single_for_device(dev, dma_handle, size, dir);
>> > +   mb();
>> > +}
>> > +
>> > +static void loongson_dma_sync_sg_for_device(struct device *dev,
>> > +                           struct scatterlist *sg, int nents,
>> > +                           enum dma_data_direction dir)
>> > +{
>> > +   swiotlb_sync_sg_for_device(dev, sg, nents, dir);
>> > +   mb();
>> > +}
>> > +
>>
>> I am not really sure why you have these extra functions, when you could
>> just modify the dma_ops to point to the swiotlb ones
>>
>> > +static dma_addr_t loongson_unity_phys_to_dma(struct device *dev, phys_addr_t paddr)
>> > +{
>> > +   return (paddr < 0x10000000) ?
>> > +                   (paddr | 0x0000000080000000) : paddr;
>> > +}
>> > +
>> > +static phys_addr_t loongson_unity_dma_to_phys(struct device *dev, dma_addr_t daddr)
>> > +{
>> > +   return (daddr < 0x90000000 && daddr >= 0x80000000) ?
>> > +                   (daddr & 0x0fffffff) : daddr;
>> > +}
>> > +
>> > +struct loongson_dma_map_ops {
>> > +   struct dma_map_ops dma_map_ops;
>> > +   dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
>> > +   phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
>> > +};
>> > +
>> > +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
>> > +{
>> > +   struct loongson_dma_map_ops *ops = container_of(get_dma_ops(dev),
>> > +                                   struct loongson_dma_map_ops, dma_map_ops);
>> > +
>> > +   return ops->phys_to_dma(dev, paddr);
>> > +}
>> > +
>> > +phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
>> > +{
>> > +   struct loongson_dma_map_ops *ops = container_of(get_dma_ops(dev),
>> > +                                   struct loongson_dma_map_ops, dma_map_ops);
>> > +
>> > +   return ops->dma_to_phys(dev, daddr);
>> > +}
>> > +
>> > +static int loongson_dma_set_mask(struct device *dev, u64 mask)
>> > +{
>> > +   /* Loongson doesn't support DMA above 32-bit */
>> > +   if (mask > DMA_BIT_MASK(32))
>> > +           return -EIO;
>> > +
>> > +   *dev->dma_mask = mask;
>> > +
>> > +   return 0;
>> > +}
>> > +
>> > +static struct loongson_dma_map_ops loongson_linear_dma_map_ops = {
>> > +   .dma_map_ops = {
>> > +           .alloc = loongson_dma_alloc_coherent,
>> > +           .free = loongson_dma_free_coherent,
>> > +           .map_page = loongson_dma_map_page,
>>
>> But why not 'swiotlb_map_page'?
>>
>> > +           .unmap_page = swiotlb_unmap_page,
>> > +           .map_sg = loongson_dma_map_sg,
>> > +           .unmap_sg = swiotlb_unmap_sg_attrs,
>> > +           .sync_single_for_cpu = swiotlb_sync_single_for_cpu,
>> > +           .sync_single_for_device = loongson_dma_sync_single_for_device,
>> > +           .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
>> > +           .sync_sg_for_device = loongson_dma_sync_sg_for_device,
>> > +           .mapping_error = swiotlb_dma_mapping_error,
>> > +           .dma_supported = swiotlb_dma_supported,
>> > +           .set_dma_mask = loongson_dma_set_mask
>> > +   },
>> > +   .phys_to_dma = loongson_unity_phys_to_dma,
>> > +   .dma_to_phys = loongson_unity_dma_to_phys
>>
>> Why do you need these? I am not seeing it being used here by any external code?
>>
>> > +};
>> > +
>> > +void __init plat_swiotlb_setup(void)
>> > +{
>> > +   swiotlb_init(1);
>> > +   mips_dma_map_ops = &loongson_linear_dma_map_ops.dma_map_ops;
>> > +}
>> > diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
>> > index 3fab204..122f4f8 100644
>> > --- a/arch/mips/mm/dma-default.c
>> > +++ b/arch/mips/mm/dma-default.c
>> > @@ -42,6 +42,13 @@ static inline int cpu_is_noncoherent_r10000(struct device *dev)
>> >            current_cpu_type() == CPU_R12000);
>> >  }
>> >
>> > +static inline int cpu_is_noncoherent_loongson(struct device *dev)
>> > +{
>> > +   return !plat_device_is_coherent(dev) &&
>> > +                   (current_cpu_type() == CPU_LOONGSON2 ||
>> > +                    current_cpu_type() == CPU_LOONGSON3);
>> > +}
>> > +
>> >  static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
>> >  {
>> >     gfp_t dma_flag;
>> > @@ -209,7 +216,7 @@ static inline void __dma_sync(struct page *page,
>> >  static void mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
>> >     size_t size, enum dma_data_direction direction, struct dma_attrs *attrs)
>> >  {
>> > -   if (cpu_is_noncoherent_r10000(dev))
>> > +   if (cpu_is_noncoherent_r10000(dev) || cpu_is_noncoherent_loongson(dev))
>
> Why this?  I hope you're not claiming the Loongson has the same very weird
> behaviour as the R10000 in a non-coherent system.  No sane CPU should ...
This can be removed on Loongson, thank you.

>
>   Ralf



[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux