This patch fixes two checks for valid gpio number, formerly (wrongly)
considering zero as invalid, now using gpio_is_valid().
Signed-off-by: Roland Stigge <stigge@xxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
Applies to v3.5-rc4
arch/mips/pci/pci-lantiq.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- linux-2.6.orig/arch/mips/pci/pci-lantiq.c
+++ linux-2.6/arch/mips/pci/pci-lantiq.c
@@ -129,7 +129,7 @@ static int __devinit ltq_pci_startup(str
/* setup reset gpio used by pci */
reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
- if (reset_gpio > 0)
+ if (gpio_is_valid(reset_gpio))
devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");
/* enable auto-switching between PCI and EBU */
@@ -192,7 +192,7 @@ static int __devinit ltq_pci_startup(str
ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
/* toggle reset pin */
- if (reset_gpio > 0) {
+ if (gpio_is_valid(reset_gpio)) {
__gpio_set_value(reset_gpio, 0);
wmb();
mdelay(1);
