From: "Steven J. Hill" <sjhill@xxxxxxxx>
Make headers consistent across the files and make changes based on
running the checkpatch script.
Signed-off-by: Steven J. Hill <sjhill@xxxxxxxx>
---
arch/mips/alchemy/board-gpr.c | 23 ++++++-----------------
arch/mips/alchemy/board-mtx1.c | 23 ++++++-----------------
arch/mips/alchemy/board-xxs1500.c | 23 +++++------------------
arch/mips/alchemy/common/platform.c | 27 +++++++++++++--------------
arch/mips/alchemy/common/prom.c | 31 +++++--------------------------
arch/mips/alchemy/devboards/prom.c | 34 ++++++++--------------------------
6 files changed, 43 insertions(+), 118 deletions(-)
diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c
index 1139173..51d3598 100644
--- a/arch/mips/alchemy/board-gpr.c
+++ b/arch/mips/alchemy/board-gpr.c
@@ -1,23 +1,12 @@
/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
* GPR board platform device registration (Au1550)
*
* Copyright (C) 2010 Wolfgang Grandegger <wg@xxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -65,7 +54,7 @@ static void gpr_reset(char *c)
alchemy_gpio_direction_output(5, 0);
/* trigger watchdog to reset board in 200ms */
- printk(KERN_EMERG "Triggering watchdog soft reset...\n");
+ pr_emerg("Triggering watchdog soft reset...\n");
raw_local_irq_disable();
alchemy_gpio_direction_output(1, 0);
udelay(1);
@@ -82,7 +71,7 @@ static void gpr_power_off(void)
void __init board_setup(void)
{
- printk(KERN_INFO "Trapeze ITS GPR board\n");
+ pr_info("Trapeze ITS GPR board\n");
pm_power_off = gpr_power_off;
_machine_halt = gpr_power_off;
diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c
index 7d1ea7a..c59d098 100644
--- a/arch/mips/alchemy/board-mtx1.c
+++ b/arch/mips/alchemy/board-mtx1.c
@@ -1,23 +1,12 @@
/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
* MTX-1 platform devices registration (Au1500)
*
* Copyright (C) 2007-2009, Florian Fainelli <florian@xxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
@@ -98,7 +87,7 @@ void __init board_setup(void)
_machine_halt = mtx1_power_off;
_machine_restart = mtx1_reset;
- printk(KERN_INFO "4G Systems MTX-1 Board\n");
+ pr_info("4G Systems MTX-1 Board\n");
}
/******************************************************************************/
@@ -296,7 +285,7 @@ static int __init mtx1_register_devices(void)
rc = gpio_request(mtx1_gpio_button[0].gpio,
mtx1_gpio_button[0].desc);
if (rc < 0) {
- printk(KERN_INFO "mtx1: failed to request %d\n",
+ pr_info("mtx1: failed to request %d\n",
mtx1_gpio_button[0].gpio);
goto out;
}
diff --git a/arch/mips/alchemy/board-xxs1500.c b/arch/mips/alchemy/board-xxs1500.c
index 0469f1c..20eafd5 100644
--- a/arch/mips/alchemy/board-xxs1500.c
+++ b/arch/mips/alchemy/board-xxs1500.c
@@ -1,25 +1,12 @@
/*
- * BRIEF MODULE DESCRIPTION
- * MyCable XXS1500 board support
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*
- * Copyright 2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
+ * MyCable XXS1500 board support
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Copyright 2003, 2008 MontaVista Software Inc. <source@xxxxxxxxxx>
*/
-
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 2c5c014..c7400f8 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -1,16 +1,15 @@
/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
* Platform device support for Au1x00 SoCs.
*
* Copyright 2004, Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>
*
* (C) Copyright Embedded Alley Solutions, Inc 2005
* Author: Pantelis Antoniou <pantelis@xxxxxxxxxxxxxxxxx>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
*/
-
#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
@@ -103,7 +102,7 @@ static void __init alchemy_setup_uarts(int ctype)
ports = kzalloc(s * (c + 1), GFP_KERNEL);
if (!ports) {
- printk(KERN_INFO "Alchemy: no memory for UART data\n");
+ pr_info("Alchemy: no memory for UART data\n");
return;
}
memcpy(ports, au1x00_uart_data[ctype], s * c);
@@ -113,7 +112,7 @@ static void __init alchemy_setup_uarts(int ctype)
for (s = 0; s < c; s++)
ports[s].uartclk = uartclk;
if (platform_device_register(&au1xx0_uart_device))
- printk(KERN_INFO "Alchemy: failed to register UARTs\n");
+ pr_info("Alchemy: failed to register UARTs\n");
}
@@ -173,7 +172,7 @@ static void __init alchemy_setup_usb(int ctype)
pdev->dev.dma_mask = &alchemy_ohci_dmamask;
if (platform_device_register(pdev))
- printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
+ pr_info("Alchemy USB: cannot add OHCI0\n");
/* setup EHCI0: Au1200/Au1300 */
@@ -192,7 +191,7 @@ static void __init alchemy_setup_usb(int ctype)
pdev->dev.dma_mask = &alchemy_ehci_dmamask;
if (platform_device_register(pdev))
- printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
+ pr_info("Alchemy USB: cannot add EHCI0\n");
}
/* Au1300: OHCI1 */
@@ -211,7 +210,7 @@ static void __init alchemy_setup_usb(int ctype)
pdev->dev.dma_mask = &alchemy_ohci_dmamask;
if (platform_device_register(pdev))
- printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");
+ pr_info("Alchemy USB: cannot add OHCI1\n");
}
}
@@ -335,7 +334,7 @@ static void __init alchemy_setup_macs(int ctype)
macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
if (!macres) {
- printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
+ pr_info("Alchemy: no memory for MAC0 resources\n");
return;
}
memcpy(macres, au1xxx_eth0_resources[ctype],
@@ -348,7 +347,7 @@ static void __init alchemy_setup_macs(int ctype)
ret = platform_device_register(&au1xxx_eth0_device);
if (ret)
- printk(KERN_INFO "Alchemy: failed to register MAC0\n");
+ pr_info("Alchemy: failed to register MAC0\n");
/* Handle 2nd MAC */
@@ -357,7 +356,7 @@ static void __init alchemy_setup_macs(int ctype)
macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
if (!macres) {
- printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
+ pr_info("Alchemy: no memory for MAC1 resources\n");
return;
}
memcpy(macres, au1xxx_eth1_resources[ctype],
@@ -372,7 +371,7 @@ static void __init alchemy_setup_macs(int ctype)
if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) {
ret = platform_device_register(&au1xxx_eth1_device);
if (ret)
- printk(KERN_INFO "Alchemy: failed to register MAC1\n");
+ pr_info("Alchemy: failed to register MAC1\n");
}
}
diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c
index a67012d..6d1df07 100644
--- a/arch/mips/alchemy/common/prom.c
+++ b/arch/mips/alchemy/common/prom.c
@@ -1,38 +1,17 @@
/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*
- * BRIEF MODULE DESCRIPTION
- * PROM library initialisation code, supports YAMON and U-Boot.
+ * PROM library initialisation code, supports YAMON and U-Boot. This file
+ * was derived from Carsten Langgaard's arch/mips/mips-boards/xx files.
*
* Copyright 2000-2001, 2006, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
*
- * This file was derived from Carsten Langgaard's
- * arch/mips/mips-boards/xx files.
- *
* Carsten Langgaard, carstenl@xxxxxxxx
* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
#include <linux/module.h>
#include <linux/init.h>
#include <linux/string.h>
diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c
index 59af1d4..f3229d0 100644
--- a/arch/mips/alchemy/devboards/prom.c
+++ b/arch/mips/alchemy/devboards/prom.c
@@ -1,40 +1,22 @@
/*
- * Common code used by all Alchemy develboards.
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*
- * Extracted from files which had this to say:
+ * Common code used by all Alchemy development boards.
+ * GPR board platform device registration (Au1550)
*
* Copyright 2000, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
#include <linux/init.h>
#include <linux/kernel.h>
+
#include <asm/fw/fw.h>
#include <asm/mach-au1x00/au1000.h>
-#if defined(CONFIG_MIPS_DB1000) || \
- defined(CONFIG_MIPS_PB1100) || \
- defined(CONFIG_MIPS_PB1500)
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_PB1100) || \
+ defined(CONFIG_MIPS_PB1500)
#define ALCHEMY_BOARD_DEFAULT_MEMSIZE 0x04000000
#else /* Au1550/Au1200-based develboards */
--
1.7.10.3
