Linux USB Users

• Thread Index

• Re: [PATCH v5 3/6] HCD files for the DWC2 driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Build break on usb-next with exynos_defconfig
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH v5 3/6] HCD files for the DWC2 driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 049/103] USB: fix urb-poison imbalance
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Build break on usb-next with exynos_defconfig
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• mx28 usb host fails on 3.8
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH] USB: option: add Huawei E5331
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH v6 0/2] Adding USB 3.0 DRD-phy support for exynos5250
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v6 1/2] usb: phy: samsung: Common out the generic stuff
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v6 2/2] usb: phy: samsung: Add PHY support for USB 3.0 controller
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH v10 6/8] usb: chipidea: imx: add internal vbus regulator control
  • From: Darius Augulis <augulis.darius@xxxxxxxxx>
• [PATCHv2] usb/net/asix_devices: Add USBNET HG20F9 ethernet dongle
  • From: Glen Turner <gdt@xxxxxxxxx>
• Re: [PATCH 1/9] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/5] USB chipidea: introduce dual role mode pdata flags
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 5/5] USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/5] USB chipidea: ci13xxx-imx: create dynamic platformdata
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/5] chipidea-for-v3.10-v1: USB chipidea: make use of DT helpers in chipidea driver improve driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/5] USB chipidea i.MX: introduce dr_mode property
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/5] USB chipidea: add PTW and PTS handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] USB: option: use vendor match for Huawei "ACM" devices
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH 3/3] USB mxs-phy: Register phy with framework
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/3] USB: move bulk of otg/otg.c to phy/phy.c
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/3] USB: add devicetree helpers for determining dr_mode and phy_type
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/3] otg-for-v3.10-v1: separate phy code and add DT helper
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Build break on usb-next with exynos_defconfig
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• [PATCH] otg-for-v3.9-v1: USB otg: fix usage of try_module_get() and module_put()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] USB: option: use vendor match for Huawei "ACM" devices
  • From: Bjørn Mork <bjorn@xxxxxxx>
• mfd: omap-usb-host: bug fix for 3.9
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/9] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/9] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/5] USB: cdc-acm: fix device unregistration
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH] net: cdc_ncm: tag Huawei devices (e.g. E5331) with FLAG_WWAN
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 1/9] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 5/5] USB: serial: fix interface refcounting
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 4/5] USB: io_ti: fix get_icount for two port adapters
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 2/5] USB: ftdi_sio: fix use after free in TIOCMIWAIT
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 1/5] USB: cdc-acm: fix device unregistration
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 3/5] USB: garmin_gps: fix memory leak on disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH resend 0/5] USB: fixes for 3.9-rc
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH 1/9] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/9] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/9] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/9] USB: add devicetree helpers for determining dr_mode and phy_type
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/9] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v10 8/8] usb: chipidea: imx: fix the error that using uninitialized pointer
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/9] USB: add devicetree helpers for determining dr_mode and phy_type
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• re: [PATCH] USB Storage: add support for Maxtor One-Touch button
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 3/9] USB: add devicetree helpers for determining dr_mode and phy_type
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/9] USB: add devicetree helpers for determining dr_mode and phy_type
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/9] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/9] USB: move bulk of otg/otg.c to phy/phy.c
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/9] USB: add devicetree helpers for determining dr_mode and phy_type
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/9] USB: move bulk of otg/otg.c to phy/phy.c
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/9] USB: add devicetree helpers for determining dr_mode and phy_type
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v5 0/9] USB: add devicetree helpers for determining dr_mode and phy_type
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/9] USB: move bulk of otg/otg.c to phy/phy.c
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/9] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 6/9] USB chipidea: introduce dual role mode pdata flags
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 8/9] USB mxs-phy: Register phy with framework
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 9/9] USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 5/9] USB chipidea: add PTW and PTS handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/9] USB chipidea: ci13xxx-imx: create dynamic platformdata
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 7/9] USB chipidea i.MX: introduce dr_mode property
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: phy: samsung: let it be built as a module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: phy: samsung: let it be built as a module
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH] usb: phy: samsung: let it be built as a module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH resubmit] ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver
  • From: Freddy Xin <freddy@xxxxxxxxxxx>
• Re: [PATCH] usb: phy: samsung: let it be built as a module
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• RE: Not enough resource for old configuration after USB bus reset
  • From: Soar Hung <soarhung@xxxxxxxxxxx>
• Re: test procedure for cdc-wdm
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 1/4] usb: musb: Enable DMA Mode1 for device mode RX
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [usb gadget] WARNING: at kernel/mutex.c:198 __mutex_lock_common()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: phy: samsung: let it be built as a module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 6/9] USB chipidea: introduce dual role mode pdata flags
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 5/9] USB: chipidea: add PTW and PTS handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Samsung SCX-3205 scanner does not work with Toshiba Satellite L855
  • From: Michal Nowak <newman.x@xxxxxxxxx>
• Re: test procedure for cdc-wdm
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH] cdc-wdm: fix buffer overflow
  • From: oliver@xxxxxxxxxx
• Re: test procedure for cdc-wdm
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 1/2] USB mxs-phy: Register phy with framework
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v5 0/6] DWC2 DesignWare HS OTG driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v5 5/6] PCI bus interface for the DWC2 driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v5 4/6] HCD descriptor DMA support for the DWC2 driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb/net/asix_devices: Add USBNET HG20F9 ethernet dongle
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v5 2/6] Core files for the DWC2 driver
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v8 8/8] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH v5 6/6] Hook the DWC2 driver into the build system
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/4] USB: dwc3: Adjust runtime pm the dwc3 driver to allow runtime suspend
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH v5 1/6] usb: common: add a routine to print the OTG state
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v8 8/8] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RESEND PATCH v9 0/2] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH v10 6/8] usb: chipidea: imx: add internal vbus regulator control
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RESEND PATCH v9 0/2] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RESEND PATCH v9 0/2] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH] drivers/usb/gadget: using strlcpy instead of strncpy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH V2] usb:musb: musbhsdma: change the number of dma channels according to hardware configuration
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RESEND PATCH v9 0/2] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v10 6/8] usb: chipidea: imx: add internal vbus regulator control
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB mxs-phy: Register phy with framework
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v2 01/37] usb/gadget: use consistent naming scheme for usb function modules
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: set TXMAXP and AUTOSET for full speed bulk in device mode
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v10 6/8] usb: chipidea: imx: add internal vbus regulator control
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] USB: dwc3: Adjust runtime pm the dwc3 driver to allow runtime suspend
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 063/100] usb: dwc3: add count field to event buffer
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v10 6/8] usb: chipidea: imx: add internal vbus regulator control
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH V2] usb:musb: musbhsdma: change the number of dma channels according to hardware configuration
  • From: Yingchun Li <sword.l.dragon@xxxxxxxxx>
• [PATCH 2/2] usb: dwc3: workaround: unexpected transtion U3 -> RESUME
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] usb: dwc3: core: define more revisions
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v10 8/8] usb: chipidea: imx: fix the error that using uninitialized pointer
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v10 7/8] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v10 6/8] usb: chipidea: imx: add internal vbus regulator control
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v10 5/8] usb: chipidea: udc: retire the flag CI13_PULLUP_ON_VBUS
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v10 4/8] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v10 3/8] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v10 2/8] usb: chipidea: add otg file
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v10 1/8] Revert "USB: chipidea: add vbus detect for udc"
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v10 0/8] Add tested id switch and vbus connect detect support for Chipidea
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: About chipidea tree
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v5 6/6] Hook the DWC2 driver into the build system
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v5 5/6] PCI bus interface for the DWC2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v5 4/6] HCD descriptor DMA support for the DWC2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v5 3/6] HCD files for the DWC2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v5 2/6] Core files for the DWC2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v5 1/6] usb: common: add a routine to print the OTG state
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v5 0/6] DWC2 DesignWare HS OTG driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH v8 8/8] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2] usb: xhci: add the suspend/resume functionality
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH] USB: xhci - fix bit definitions for IMAN register
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb/net/asix_devices: Add USBNET HG20F9 ethernet dongle
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] usb/net/asix_devices: Add USBNET HG20F9 ethernet dongle
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] usb/net/asix_devices: Add USBNET HG20F9 ethernet dongle
  • From: Richard Ash <richard@xxxxxxxxxxxxxxxx>
• Re: [PATCH 076/100] usb: gadget: udc-core: copy dma-related parameters from parent
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 095/103] USB: opticon: remove disconnect test from tiocmset
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 099/103] USB: visor: always disable uart on close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 062/103] USB: f81232: add custom tiocmiwait operation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 081/103] USB: spcp8x5: clean up modem status retrieval
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 071/103] USB: mos7840: switch to generic get_icount implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 038/103] USB: usb_wwan: remove bogus disconnect test in close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 077/103] USB: spcp8x5: remove broken TIOCMIWAIT support
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 083/103] USB: spcp8x5: add proper modem-status support
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 058/103] USB: ark3116: switch to generic get_icount implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 028/103] USB: serial: remove port number from generic-driver debug
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 018/103] USB: ti_usb_3410_5052: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 037/103] USB: sierra: remove bogus disconnect test in close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 041/103] USB: ssu100: remove custom close operation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 022/103] USB: pl2303: use interface device for debug
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 054/103] USB: serial: add generic get_icount implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 072/103] USB: mos7840: switch to generic TIOCMIWAIT implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 068/103] USB: mct_u232: switch to generic TIOCMIWAIT implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 098/103] USB: quatech2: always disable uart on close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 070/103] USB: mos7840: remove smp barriers from icount handling
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 056/103] USB: ftio_sio: switch to generic TIOCMIWAIT implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 074/103] USB: pl2303: add custom tiocmiwait operation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 021/103] USB: iuu_phoenix: remove unnecessary urb kill on close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 027/103] USB: serial: remove redundant allocation error messages
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 019/103] USB: ftdi_sio: remove obsolete port data refcounting
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 040/103] USB: ssu100: remove explicit initialisation of disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 048/103] USB: serial: rename port release
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 014/103] USB: oti6858: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 060/103] USB: ch341: replace custom ioctl operation with tiocmiwait
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 089/103] USB: cypress_m8: remove bogus disconnect test from close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 031/103] USB: digi_acceleport: remove bogus disconnect test in close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 026/103] USB: serial: clean up debug info
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 057/103] USB: ftdi_sio: switch to generic get_icount implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 075/103] USB: quatech2: switch to generic get_icount implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 015/103] USB: pl2303: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 045/103] USB: serial: clean up generic-operation handling
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 090/103] USB: io_ti: always disable uart on close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 094/103] USB: opticon: fix return value of tiocmset
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 086/103] USB: ti_usb_3410_5052: switch to generic get_icount implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 047/103] USB: serial: fix port release
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 032/103] USB: iuu_phoenix: remove bogus disconnect test in close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 069/103] USB: mos7720: remove broken get_icount and TIOCMIWAIT
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 093/103] USB: mos7720: always disable uart on close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 064/103] USB: io_edgeport: switch to generic TIOCMIWAIT implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 063/103] USB: io_edgeport: switch to generic get_icount implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 025/103] USB: serial: remove redundant comments
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 035/103] USB: keyspan_pda: remove bogus disconnect test in close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 091/103] USB: kl5kusb105: always disable uart on close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 051/103] USB: serial: fix usb-serial bus device removal
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 042/103] USB: serial: fix generic disconnect implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 067/103] USB: mct_u232: switch to generic get_icount implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 020/103] USB: kl5kusb105: remove unnecessary urb kill on close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 034/103] USB: keyspan_pda: remove bogus disconnect test from dtr_rts
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 087/103] USB: ti_usb_3410_5052: switch to generic TIOCMIWAIT implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 046/103] USB: cyberjack: fix disconnect handling
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 065/103] USB: io_ti: switch to generic get_icount implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 030/103] USB: cyberjack: remove bogus disconnect test in close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 029/103] USB: ark3116: remove bogus disconnect test in close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 103/103] USB: serial: update copyright information
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 080/103] USB: spcp8x5: pass usb-serial port to control functions
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 049/103] USB: fix urb-poison imbalance
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 050/103] USB: serial: use urb poison to reliably kill traffic
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 052/103] USB: serial: add tiocmiwait subdriver operation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 044/103] USB: serial: remove generic release callback
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 084/103] USB: ssu100: switch to generic get_icount implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 061/103] USB: cypress_m8: replace custom ioctl operation with tiocmiwait
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 100/103] USB: garmin_gps: remove bogus disconnect test in close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 079/103] USB: spcp8x5: clean up code
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 082/103] USB: spcp8x5: reimplement device type detection
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 096/103] USB: pl2303: fix return value of tiocmset
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 053/103] USB: serial: add generic TIOCMIWAIT implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 066/103] USB: io_ti: switch to generic TIOCMIWAIT implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 076/103] USB: quatech2: switch to generic TIOCMIWAIT implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 102/103] USB: iuu_phoenix: remove bogus disconnect test in close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 024/103] USB: serial: rename tty-port callbacks
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 013/103] USB: mos7840: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 088/103] USB: cp210x: always disable uart on close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 017/103] USB: ssu100: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 039/103] USB: serial: remove bogus disconnect test in cleanup
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 055/103] USB: ftdi_sio: use port icount
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 097/103] USB: pl2303: remove disconnect test from tiocmset
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 009/103] USB: f81232: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 033/103] USB: keyspan: remove bogus disconnect test in close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 043/103] USB: serial: remove generic disconnect callback
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 101/103] USB: garmin_gps: remove bogus disconnect test in bulk callback
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 023/103] USB: pl2303: make set_control_lines a port operation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 059/103] USB: ark3116: switch to generic TIOCMIWAIT implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 078/103] USB: spcp8x5: remove broken uart-error handling
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 036/103] USB: mos7840: remove bogus disconnect test in close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 085/103] USB: ssu100: switch to generic TIOCMIWAIT implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 99/103] USB: visor: always disable uart on close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH 076/100] usb: gadget: udc-core: copy dma-related parameters from parent
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 007/103] USB: ch341: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 005/103] USB: serial: fix interface refcounting
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 012/103] USB: mct_u232: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 011/103] USB: io_ti: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 073/103] USB: oti6858: replace custom ioctl operation with tiocmiwait
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 016/103] USB: quatech2: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 008/103] USB: cypress_m8: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 010/103] USB: io_edgeport: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 092/103] USB: metro-usb: always disable uart on close
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 004/103] USB: io_ti: fix get_icount for two port adapters
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 001/103] USB: cdc-acm: fix device unregistration
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 006/103] USB: ark3116: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 003/103] USB: garmin_gps: fix memory leak on disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 000/103] USB: serial/cdc-acm: disconnect-related patches
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 002/103] USB: ftdi_sio: fix use after free in TIOCMIWAIT
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH 063/100] usb: dwc3: add count field to event buffer
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 059/100] usb: musb: gadget: fix compile warning
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2 00/37] Towards configfs - usb functions conversion to the new interface
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH v2 00/37] Towards configfs - usb functions conversion to the new interface
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/37] usb/gadget: use consistent naming scheme for usb function modules
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v8 8/8] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 01/37] usb/gadget: use consistent naming scheme for usb function modules
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v2 01/37] usb/gadget: use consistent naming scheme for usb function modules
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH v5] musb: blackfin: add bf60x support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] fusb300_udc: modify stall clear and idma reset procedure
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [ANNOUNCE] tree maintenance change
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 01/37] usb/gadget: use consistent naming scheme for usb function modules
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 43/49] usb: gadget: omap_udc: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 07/37] usb/gadget: convert mass_storage to new function interface
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 04/37] usb/gadget: create header file for f_mass_storage
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 02/37] usb/gadget: create utility for mass_storage
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 09/37] usb/gadget: f_mass_storage: remove compatibility layer
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 06/37] usb/gadget: convert acm_ms to new function interface
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 03/37] usb/gadget: allow not clearing the memory for struct fsg_common
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 15/37] usb/gadget: f_ncm: remove compatibility layer
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 13/37] usb/gadget: f_ncm: convert to new function interface with backward compatibility
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 16/37] usb/gadget: f_eem: convert to new function interface with backward compatibility
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 12/37] usb/gadget: rndis: convert into module
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 17/37] usb/gadget: ether: convert to new interface of f_eem
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 18/37] usb/gadget: f_eem: remove compatibility layer
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 20/37] usb/gadget: cdc2: convert to new interface of f_ecm
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 19/37] usb/gadget: f_ecm: convert to new function interface with backward compatibility
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 21/37] usb/gadget: ether: convert to new interface of f_ecm
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 11/37] usb/gadget: u_ether: convert into module
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 26/37] usb/gadget: multi: Remove unused include
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 22/37] usb/gadget: g_ffs: convert to new interface of f_ecm
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 25/37] usb/gadget: f_ecm: remove compatibility layer
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 23/37] usb/gadget: multi: convert to new interface of f_ecm
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 31/37] usb/gadget: f_rndis: convert to new function interface with backward compatibility
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 24/37] usb/gadget: nokia: convert to new interface of f_ecm
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 34/37] usb/gadget: multi: convert to new interface of f_rndis
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 28/37] usb/gadget: ether: convert to new interface of f_subset
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 37/37] usb/gadget: merge f_rndis_usb.ko with u_rndis.ko into f_rndis_usb.ko
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 35/37] usb/gadget: f_rndis: remove compatibility layer
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 36/37] usb/gadget: g_ffs: use consistent naming for config bind functions
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 30/37] usb/gadget: f_subset: remove compatibility layer
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 32/37] usb/gadget: ether: convert to new interface of f_rndis
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 33/37] usb/gadget: g_ffs: convert to new interface of f_rndis
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 29/37] usb/gadget: g_ffs: convert to new interface of f_subset
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 27/37] usb/gadget: f_subset: convert to new function interface with backward compatibility
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 14/37] usb/gadget: ncm: convert to new function interface
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 08/37] usb/gadget: convert multi to new function interface
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 10/37] usb/gadget: merge u_ms.ko with f_mass_storage_usb.ko into f_mass_storage_usb.ko
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 05/37] usb/gadget: convert f_mass_storage to new function interface with backward compatibility
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 01/37] usb/gadget: use consistent naming scheme for usb function modules
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH v2 00/37] Towards configfs - usb functions conversion to the new interface
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH 43/49] usb: gadget: omap_udc: don't assign gadget.dev.release directly
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/49] usb: gadget: udc-core: initialize gadget->dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: carl9170 A-MPDU transmit problem
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• Re: [PATCH v4] xhci - correct comp_mode_recovery_timer on return from hibernate
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Prevent USB hub remove oops
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: About chipidea tree
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/49] usb: gadget: udc-core: initialize gadget->dev.driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Chipidea driver support for the AR933x platform
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] Prevent USB hub remove oops
  • From: Daniel J Blueman <daniel@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH 0/5] Chipidea driver support for the AR933x platform
  • From: "Svetoslav Neykov" <svetoslav@xxxxxxxxxxx>
• RE: [PATCH 0/5] Chipidea driver support for the AR933x platform
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• RE: [PATCH 0/5] Chipidea driver support for the AR933x platform
  • From: "Svetoslav Neykov" <svetoslav@xxxxxxxxxxx>
• [PATCH 3/3] usb: dwc3-omap: stop using nop-usb-xceiv
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/3] usb: dwc3-omap: remove platform data associated with dwc3-omap
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 1/3] usb: dwc3-omap: Minor fixes to get dt working
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: About chipidea tree
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: test procedure for cdc-wdm
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH v4] xhci - correct comp_mode_recovery_timer on return from hibernate
  • From: Tony Camuso <tcamuso@xxxxxxxxxx>
• Re: test procedure for cdc-wdm
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 049/100] usb: dwc3: omap: bail out early on non-DT boot
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH 049/100] usb: dwc3: omap: bail out early on non-DT boot
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] pci: do not try to assign irq 255
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: About chipidea tree
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 049/100] usb: dwc3: omap: bail out early on non-DT boot
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH] usb: chipidea: register debugging sysfs on our device
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 01/49] usb: gadget: fsl_udc_core: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 26/49] usb: gadget: s3c2410_udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] pci: do not try to assign irq 255
  • From: David Härdeman <david@xxxxxxxxxxx>
• [PATCH 32/49] usb: gadget: bcm63xx_udc: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 49/49] usb: gadget: udc-core: remove protection when setting gadget.dev.release
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 48/49] usb: renesas: gadget: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 46/49] usb: gadget: s3c-hsotg: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 47/49] usb: musb: gadget: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 34/49] usb: gadget: fsl_qe_udc: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 45/49] usb: gadget: r8a66597-udc: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 31/49] usb: gadget: amd5536udc: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 30/49] usb: dwc3: gadget: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 36/49] usb: gadget: fusb300_udc: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 44/49] usb: gadget: pch_udc: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 43/49] usb: gadget: omap_udc: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 42/49] usb: gadget: net2280: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 41/49] usb: gadget: net2272: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 40/49] usb: gadget: mv_udc_core: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 39/49] usb: gadget: mv_u3d_core: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 38/49] usb: gadget: m66592-udc: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 37/49] usb: gadget: goku_udc: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 35/49] usb: gadget: fsl_udc_core: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 33/49] usb: gadget: dummy_hcd: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 28/49] usb: gadget: udc-core: introduce usb_add_gadget_udc_release()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 29/49] usb: chipidea: udc: don't assign gadget.dev.release directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 27/49] usb: renesas: gadget: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 25/49] usb: gadget: s3c-hsudc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 24/49] usb: gadget: s3c-hsotg: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 23/49] usb: gadget: pxa27x_udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 11/49] usb: gadget: fusb300_udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 22/49] usb: gadget: pxa25x_udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 21/49] usb: gadget: pch_udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 20/49] usb: gadget: omap_udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 19/49] usb: gadget: net2280: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 18/49] usb: gadget: net2272: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 17/49] usb: gadget: mv_udc_core: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 16/49] usb: gadget: mv_u3d_core: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 15/49] usb: gadget: m66592-udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 14/49] usb: gadget: lpc32xx_udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 13/49] usb: gadget: imx_udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 12/49] usb: gadget: goku_udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 10/49] usb: gadget: fsl_udc_core: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 09/49] usb: gadget: fsl_qe_udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 08/49] usb: gadget: dummy_hcd: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 07/49] usb: gadget: bcm63xx_udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 04/49] usb: gadget: amd5536udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 06/49] usb: gadget: atmel_usba_udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 05/49] usb: gadget: at91_udc: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 03/49] usb: dwc3: gadget: don't touch gadget.dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 02/49] usb: gadget: udc-core: initialize gadget->dev.driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 00/49] usb: gadget: more patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/5] Chipidea driver support for the AR933x platform
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: register debugging sysfs on our device
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: About chipidea tree
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: About chipidea tree
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 076/100] usb: gadget: udc-core: copy dma-related parameters from parent
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 0/4] TTY: port hangup and close fixes
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 087/100] usb: dwc3: gadget: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: About chipidea tree
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] TTY: clean up port drain-delay handling
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 2/4] TTY: fix DTR not being dropped on hang up
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 0/4] TTY: port hangup and close fixes
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 1/4] TTY: clean up port shutdown
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 4/4] TTY: fix close of uninitialised ports
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH 2/4] TTY: fix DTR not being dropped on hang up
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: About chipidea tree
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: About chipidea tree
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: register debugging sysfs on our device
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: chipidea: register debugging sysfs on our device
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 006/100] usb: gadget: at91_udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 001/100] usb: gadget: udc-core: allow udc class register gadget device
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 005/100] usb: gadget: amd5536udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 013/100] usb: gadget: goku_udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 014/100] usb: gadget: imx_udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 012/100] usb: gadget: fusb300_udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 016/100] usb: gadget: m66592-udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 011/100] usb: gadget: fsl_udc_core: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 021/100] usb: gadget: net2280: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 020/100] usb: gadget: net2272: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 024/100] usb: gadget: s3c-hsotg: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 023/100] usb: gadget: r8a66597-udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 030/100] usb: chipidea: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 029/100] usb: gadget: pxa27x_udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 031/100] usb: gadget: drop now unnecessary flag
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 027/100] usb: renesas_usbhs: gadget: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 035/100] usb: gadget: fsl_udc_core: switch over to usb_gadget_map/unmap_request()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 036/100] usb: gadget: fusb300: switch over to usb_gadget_map/unmap_request()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 042/100] usb: dwc3: gadget: save state of pullups
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 045/100] usb: dwc3: omap: remove unused fields from private structure
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 044/100] usb: dwc3: omap: introduce enable/disable IRQ methods
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 052/100] usb: musb: switch over to devm_ioremap_resource()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 046/100] usb: dwc3: omap: add basic suspend/resume support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 051/100] usb: musb: core: remove unnecessary pr_info()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 054/100] usb: musb: force PIO-only if we're building multiplatform kernels
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 050/100] usb: dwc3: omap: fix error path
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 057/100] usb: musb: ux500_dma: kill compile warnings
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 00/11] usb: gadget: bug fixes
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 03/11] usb: dwc3: glue layers shouldn't know about the core IP
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 066/100] usb: gadget: introduce gadget state tracking
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 02/11] usb: dwc3: omap: fix a typo on of_device_id
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 04/11] usb: dwc3: gadget: remove unnecessary code
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 05/11] usb: chipidea: register debugging sysfs on our device
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 08/11] usb: gadget: s3c2410: fix gadget->dev registration
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 072/100] usb: dwc3: debugfs: improve debugfs file creation
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 07/11] usb: gadget: make usb functions to load before gadget driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 09/11] usb: gadget: pxa25x: fix gadget->dev registration
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 076/100] usb: gadget: udc-core: copy dma-related parameters from parent
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 074/100] usb: gadget: pxa27x_udc: drop ARCH_PXA dependency
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 077/100] usb: gadget: udc-core: initialize parent
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 075/100] usb: gadget: pxa27x_udc: switch over to module_platform_driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 078/100] usb: gadget: chipidea: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 10/11] usb: gadget: imx_udc: fix gadget->dev registration
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 086/100] usb: gadget: m66592-udc: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 079/100] usb: gadget: amd5536udc: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 085/100] usb: gadget: imx_udc: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 088/100] usb: gadget: mv_u3d_core: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 084/100] usb: gadget: goku_udc: remove unused macro
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 089/100] usb: gadget: mv_udc_core: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 093/100] usb: gadget: pch_udc: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 098/100] usb: gadget: s3c-hsudc: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 096/100] usb: gadget: r8a66597-udc: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 097/100] usb: gadget: s3c-hsotg: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 100/100] usb: musb: gadget: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 099/100] usb: gadget: s3c2410_udc: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 095/100] usb: gadget: pxa27x_udc: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 092/100] usb: gadget: omap_udc: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 094/100] usb: gadget: pxa25x_udc: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 091/100] usb: gadget: net2280: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 090/100] usb: gadget: net2272: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 087/100] usb: dwc3: gadget: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 083/100] usb: gadget: goku_udc: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 082/100] usb: gadget: fusb300_udc: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 081/100] usb: gadget: bcm63xx_udc: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 080/100] usb: gadget: atmel_usba_udc: remove unnecessary initializations
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 073/100] usb: dwc3: core: avoid checkpatch.pl warning
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 11/11] usb: gadget: s3c2410: fix build breakage
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 070/100] usb: dwc3: debugfs: when unknown, print only the state value
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 071/100] usb: dwc3: debugfs: mark our regset structure const
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 06/11] usb: gadget: pxa27x: fix gadget->dev registration
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 069/100] usb: dwc3: debugfs: add two missing Link States
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 068/100] usb: dwc3: remove our homebrew state mechanism
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 067/100] usb: dwc3: gadget: implement gadget state tracking
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 01/11] usb: dwc3: core: don't forget to free coherent memory
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 065/100] usb: common: introduce usb_state_string()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 064/100] usb: dwc3: gadget: move to threaded IRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 063/100] usb: dwc3: add count field to event buffer
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 062/100] usb: dwc3: add a flags field to event buffer
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 061/100] usb: dwc3: core: remove bogus comment to our structure
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 060/100] usb: musb: Kconfig: drop unnecessary dependencies
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 059/100] usb: musb: gadget: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 058/100] usb: musb: dsps: fix possible compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 056/100] usb: musb: dsps: add missing include
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 055/100] usb: musb: make davinci and da8xx glues depend on BROKEN
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 053/100] usb: musb: gadget: delete wrong comment
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 047/100] usb: dwc3: exynos: add basic suspend/resume support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 049/100] usb: dwc3: omap: bail out early on non-DT boot
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 048/100] usb: dwc3: pci: add basic suspend/resume support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 043/100] usb: dwc3: core: add power management support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v9 0/9] Add tested id switch and vbus connect detect support for Chipidea
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH 039/100] usb: musb: gadget: switch over to usb_gadget_map/unmap_request()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 041/100] usb: dwc3: gadget: introduce and use enable/disable irq methods
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 038/100] usb: gadget: mv_udc_core: switch over to usb_gadget_map/unmap_request()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 040/100] usb: dwc3: core: explicitly setup and cleanup event buffers
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 037/100] usb: gadget: lpc32xx_udc: switch over to usb_gadget_map/unmap_request()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 034/100] usb: gadget: atmel_usba_udc: switch over to usb_gadget_map/unmap_request()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 033/100] usb: gadget: amd5536udc: remove unused structure member
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 032/100] usb: gadget: s3c-hsotg: switch over to usb_gadget_map/unmap_request()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 028/100] usb: gadget: pxa25x_udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 026/100] usb: gadget: s3c2410_udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 025/100] usb: gadget: s3c-hsudc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 022/100] usb: gadget: pch_udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 019/100] usb: gadget: mv_udc_core: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 018/100] usb: gadget: mv_u3d_core: fix a compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 017/100] usb: gadget: mv_u3d_core: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 015/100] usb: gadget: lpc32xx_udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 009/100] usb: gadget: dummy_hcd: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 010/100] usb: gadget: fsl_qe_udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 008/100] usb: gadget: bcm63xx_udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 007/100] usb: gadget: atmel_usba_udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 004/100] usb: gadget: omap_udc: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 003/100] usb: musb: gadget: let udc-core manage gadget-dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 002/100] usb: dwc3: gadget: let udc-core manage gadget->dev
  • From: Felipe Balbi <balbi@xxxxxx>