Hi Samuel, One of my patch that I sent for 3.9 introduces a bug that fails to update the port mode hostconfig register. Because of that, the port modes will always be 0 (i.e. EHCI PHY mode) and other modes will not work. PHY mode will work, so beagle/panda have no issues. Since my hardware setup uses only PHY mode, I couldn't catch this problem earlier. Below is the fix. >From 82466757a212bd8b54d806c9d56b1acccbd4d464 Mon Sep 17 00:00:00 2001 From: Roger Quadros <rogerq@xxxxxx> Date: Wed, 27 Feb 2013 15:19:24 +0200 Subject: [PATCH] mfd: omap-usb-host: Actually update hostconfig The helper functions omap_usbhs_rev1_hostconfig() and omap_usbhs_rev2_hostconfig() don't write into the hostconfig register. Make sure that we write the return value into the hostconfig register. Signed-off-by: Roger Quadros <rogerq@xxxxxx> --- drivers/mfd/omap-usb-host.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 6b5edf6..4febc5c 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -460,15 +460,15 @@ static void omap_usbhs_init(struct device *dev) switch (omap->usbhs_rev) { case OMAP_USBHS_REV1: - omap_usbhs_rev1_hostconfig(omap, reg); + reg = omap_usbhs_rev1_hostconfig(omap, reg); break; case OMAP_USBHS_REV2: - omap_usbhs_rev2_hostconfig(omap, reg); + reg = omap_usbhs_rev2_hostconfig(omap, reg); break; default: /* newer revisions */ - omap_usbhs_rev2_hostconfig(omap, reg); + reg = omap_usbhs_rev2_hostconfig(omap, reg); break; } -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html