Clean up this driver somewhat.
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
---
drivers/usb/serial/spcp8x5.c | 72 +++++++++++++++++++++++---------------------
1 file changed, 37 insertions(+), 35 deletions(-)
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index f34930c..a5c3a36 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -13,8 +13,6 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
- *
*/
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -28,7 +26,7 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
-#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver"
+#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver"
#define SPCP8x5_007_VID 0x04FC
#define SPCP8x5_007_PID 0x0201
@@ -52,7 +50,7 @@ static const struct usb_device_id id_table[] = {
MODULE_DEVICE_TABLE(usb, id_table);
struct spcp8x5_usb_ctrl_arg {
- u8 type;
+ u8 type;
u8 cmd;
u8 cmd_type;
u16 value;
@@ -147,10 +145,10 @@ enum spcp8x5_type {
};
struct spcp8x5_private {
- spinlock_t lock;
+ spinlock_t lock;
enum spcp8x5_type type;
- u8 line_control;
- u8 line_status;
+ u8 line_control;
+ u8 line_status;
};
static int spcp8x5_port_probe(struct usb_serial_port *port)
@@ -180,7 +178,7 @@ static int spcp8x5_port_probe(struct usb_serial_port *port)
spin_lock_init(&priv->lock);
priv->type = type;
- usb_set_serial_port_data(port , priv);
+ usb_set_serial_port_data(port, priv);
return 0;
}
@@ -195,13 +193,16 @@ static int spcp8x5_port_remove(struct usb_serial_port *port)
return 0;
}
-/* set the modem control line of the device.
- * NOTE spcp825-007 not supported this */
-static int spcp8x5_set_ctrlLine(struct usb_device *dev, u8 value,
+/*
+ * Set the modem control line of the device.
+ *
+ * NOTE: not supported by spcp825-007
+ */
+static int spcp8x5_set_ctrl_line(struct usb_device *dev, u8 value,
enum spcp8x5_type type)
{
int retval;
- u8 mcr = 0 ;
+ u8 mcr = 0;
if (type == SPCP825_007_TYPE)
return -EPERM;
@@ -215,8 +216,11 @@ static int spcp8x5_set_ctrlLine(struct usb_device *dev, u8 value,
return retval;
}
-/* get the modem status register of the device
- * NOTE spcp825-007 not supported this */
+/*
+ * Get the modem status register of the device.
+ *
+ * NOTE: not supported by spcp825-007
+ */
static int spcp8x5_get_msr(struct usb_device *dev, u8 *status,
enum spcp8x5_type type)
{
@@ -249,9 +253,12 @@ static int spcp8x5_get_msr(struct usb_device *dev, u8 *status,
return ret;
}
-/* select the work mode.
- * NOTE this function not supported by spcp825-007 */
-static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
+/*
+ * Select the work mode.
+ *
+ * NOTE: not supported by spcp825-007
+ */
+static void spcp8x5_set_work_mode(struct usb_device *dev, u16 value,
u16 index, enum spcp8x5_type type)
{
int ret;
@@ -273,8 +280,10 @@ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
static int spcp8x5_carrier_raised(struct usb_serial_port *port)
{
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+
if (priv->line_status & MSR_STATUS_LINE_DCD)
return 1;
+
return 0;
}
@@ -293,20 +302,17 @@ static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
| MCR_CONTROL_LINE_RTS);
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
- spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
+ spcp8x5_set_ctrl_line(port->serial->dev, control, priv->type);
}
static void spcp8x5_init_termios(struct tty_struct *tty)
{
- /* for the 1st time call this function */
tty->termios = tty_std_termios;
tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
tty->termios.c_ispeed = 115200;
tty->termios.c_ospeed = 115200;
}
-/* set the serial param for transfer. we should check if we really need to
- * transfer. if we set flow control we should do this too. */
static void spcp8x5_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
@@ -321,7 +327,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
int i;
u8 control;
-
/* check that they really want us to change something */
if (!tty_termios_hw_change(&tty->termios, old_termios))
return;
@@ -337,7 +342,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
if (control != priv->line_control) {
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
- spcp8x5_set_ctrlLine(serial->dev, control , priv->type);
+ spcp8x5_set_ctrl_line(serial->dev, control , priv->type);
} else {
spin_unlock_irqrestore(&priv->lock, flags);
}
@@ -397,9 +402,9 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
if (cflag & PARENB) {
buf[1] |= (cflag & PARODD) ?
SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
- } else
+ } else {
buf[1] |= SET_UART_FORMAT_PAR_NONE;
-
+ }
uartdata = buf[0] | buf[1]<<8;
i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
@@ -412,13 +417,11 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
if (cflag & CRTSCTS) {
/* enable hardware flow control */
- spcp8x5_set_workMode(serial->dev, 0x000a,
+ spcp8x5_set_work_mode(serial->dev, 0x000a,
SET_WORKING_MODE_U2C, priv->type);
}
}
-/* open the serial port. do some usb system call. set termios and get the line
- * status of the device. */
static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ktermios tmp_termios;
@@ -438,7 +441,7 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
if (ret)
return ret;
- spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
+ spcp8x5_set_ctrl_line(serial->dev, priv->line_control, priv->type);
/* Setup termios */
if (tty)
@@ -476,7 +479,7 @@ static int spcp8x5_tiocmset(struct tty_struct *tty,
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
- return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
+ return spcp8x5_set_ctrl_line(port->serial->dev, control, priv->type);
}
static int spcp8x5_tiocmget(struct tty_struct *tty)
@@ -503,7 +506,6 @@ static int spcp8x5_tiocmget(struct tty_struct *tty)
return result;
}
-/* All of the device info needed for the spcp8x5 SIO serial converter */
static struct usb_serial_driver spcp8x5_device = {
.driver = {
.owner = THIS_MODULE,
@@ -511,13 +513,13 @@ static struct usb_serial_driver spcp8x5_device = {
},
.id_table = id_table,
.num_ports = 1,
- .open = spcp8x5_open,
+ .open = spcp8x5_open,
.dtr_rts = spcp8x5_dtr_rts,
.carrier_raised = spcp8x5_carrier_raised,
- .set_termios = spcp8x5_set_termios,
+ .set_termios = spcp8x5_set_termios,
.init_termios = spcp8x5_init_termios,
- .tiocmget = spcp8x5_tiocmget,
- .tiocmset = spcp8x5_tiocmset,
+ .tiocmget = spcp8x5_tiocmget,
+ .tiocmset = spcp8x5_tiocmset,
.port_probe = spcp8x5_port_probe,
.port_remove = spcp8x5_port_remove,
};
--
1.8.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
