Linux USB Users

• Thread Index

• [PATCH v1] usb: serial: Remove redundant NULL check before kfree
  • From: syamsidhardh@xxxxxxxxx
• [PATCH v1] usb: otg: Remove redundant NULL check before kfree
  • From: syamsidhardh@xxxxxxxxx
• RE: dwc3 PHY autosuspend feature
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: dwc3 PHY autosuspend feature
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] usb: dwc3: gadget: use num_(in|out)_eps from HW params
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: Problem with linux-3.7.7 (Stern - d01875f11f05f76fc471cec94d701201c1b34389)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: dwc3 PHY autosuspend feature
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: dwc3 PHY autosuspend feature
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [Fwd: [PATCH v2 0/4] TTY: port hangup and close fixes]
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc3: gadget: use num_(in|out)_eps from HW params
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v11 9/9] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc3: gadget: use num_(in|out)_eps from HW params
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] usb: dwc3: gadget: use num_(in|out)_eps from HW params
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] usb: dwc3: gadget: use num_(in|out)_eps from HW params
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] usb: dwc3: calculate the number of endpoints
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v11 3/9] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [Fwd: [PATCH v2 0/4] TTY: port hangup and close fixes]
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH] USB: added support for Cinterion's products AH6 and PLS8
  • From: Schmiedl Christian <Christian.Schmiedl@xxxxxxxxxxx>
• Re: [Fwd: [PATCH v2 0/4] TTY: port hangup and close fixes]
  • From: Jiri Slaby <jslaby@xxxxxxx>
• Re: 答复: [PATCH] USB: storage: fix Huawei mode switching regression
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH v4] xhci - correct comp_mode_recovery_timer on return from hibernate
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] xhci - correct comp_mode_recovery_timer on return from hibernate
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: [PATCH v1 1/7] USB: adds comment on suspend callback
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] xhci - correct comp_mode_recovery_timer on return from hibernate
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: v3.9-rc1: swapper/0 [ INFO: possible circular locking dependency detected ]
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH] usb: Makefile: fix drivers/usb/phy/ Makefile entry
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v1 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: v3.9-rc1: swapper/0 [ INFO: possible circular locking dependency detected ]
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Fwd: USB2 isochronous camera not working on USB3 port
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• [PATCH v2] usb: musb: da8xx: Fix build breakage due to typo
  • From: Michael Riesch <michael.riesch@xxxxxxxxxx>
• Re: [PATCH v1 7/7] usbnet: qmi_wwan: don't recover device if suspend fails in system sleep
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v1 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v11 6/9] usb: chipidea: add vbus regulator control
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v11 4/9] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state
  • From: Felipe Balbi <balbi@xxxxxx>
• dwc3 PHY autosuspend feature
  • From: Felipe Balbi <balbi@xxxxxx>
• v3.9-rc1: swapper/0 [ INFO: possible circular locking dependency detected ]
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH v1 7/7] usbnet: qmi_wwan: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v1 6/7] usbnet: smsc75xx: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v1 5/7] usbnet: smsc95xx: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v1 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v1 3/7] USBHID: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v1 2/7] USB: serial: handle suspend failure path correctly
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v1 1/7] USB: adds comment on suspend callback
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v1 0/7] USB: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH v11 8/9] usb: chipidea: imx: add getting vbus regulator code
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v11 9/9] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v11 8/9] usb: chipidea: imx: add getting vbus regulator code
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v11 6/9] usb: chipidea: add vbus regulator control
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v11 7/9] usb: chipidea: delete the delayed work
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v11 5/9] usb: chipidea: udc: retire the flag CI13_PULLUP_ON_VBUS
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v11 4/9] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v11 3/9] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v11 1/9] Revert "USB: chipidea: add vbus detect for udc"
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v11 0/9] Add tested id switch and vbus connect detect support for Chipidea
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v11 2/9] usb: chipidea: add otg file
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Bo Shen <voice.shen@xxxxxxxxx>
• Re: mfd: omap-usb-host: bug fix for 3.9
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
  • From: Chao Xie <xiechao.mail@xxxxxxxxx>
• Re: [PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH 3/5] usb: musb: ux500: add otg notifier support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
  • From: Chao Xie <xiechao.mail@xxxxxxxxx>
• Re: [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/9] usb: gadget: fix omap_udc build errors
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 3/7] HCD files for the DWC2 driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/7] usb: common: add a routine to print the OTG state
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
  • From: Chao Xie <xiechao.mail@xxxxxxxxx>
• Re: Stable backport request, Was: Re: [regression] external HDD in USB3 enclosure cannot be dynamically removed (Re: Linux 3.7.5)
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: 答复: [PATCH] USB: storage: fix Huawei mode switching regression
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] usb: musb: ux500: add otg notifier support
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• Re: v3.8 regression: Huawei mode switching fails (was Re: [PATCH 2/2]linux-usb:optimize to match the Huawei USB storage devices and support new switch command)
  • From: "greg@xxxxxxxxx" <greg@xxxxxxxxx>
• 答复: [PATCH] USB: storage: fix Huawei mode switching regression
  • From: "Linlei (Lei Lin)" <lei.lin@xxxxxxxxxx>
• Re: [PATCH 4/9] usb: gadget: fix omap_udc build errors
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH][v3] xhci: correctly enable interrupts
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Fwd: a usb regression in kernel 2.6.37 and upper
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/23] ldisc fixes
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] xhci - correct comp_mode_recovery_timer on return from hibernate
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH v6 3/7] HCD files for the DWC2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH] pci: do not try to assign irq 255
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [Fwd: [PATCH v2 0/4] TTY: port hangup and close fixes]
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/9] usb: gadget: fix omap_udc build errors
  • From: Felipe Balbi <balbi@xxxxxx>
• Stable backport request, Was: Re: [regression] external HDD in USB3 enclosure cannot be dynamically removed (Re: Linux 3.7.5)
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [Fwd: [PATCH v2 0/4] TTY: port hangup and close fixes]
  • From: Jiri Slaby <jslaby@xxxxxxx>
• Re: [Fwd: [PATCH v2 0/4] TTY: port hangup and close fixes]
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [Fwd: [PATCH v2 0/4] TTY: port hangup and close fixes]
  • From: Jiri Slaby <jslaby@xxxxxxx>
• [PATCH] usb: serial: Remove redundant NULL check before kfree
  • From: Syam Sidhardhan <syamsidhardh@xxxxxxxxx>
• [PATCH] usb: otg: Remove redundant NULL check before kfree
  • From: Syam Sidhardhan <syamsidhardh@xxxxxxxxx>
• Re: [PATCH] usb/gadget: initialize gadget functions helper befor functions & gadgets
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH] usb/gadget: initialize gadget functions helper befor functions & gadgets
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [Fwd: [PATCH v2 0/4] TTY: port hangup and close fixes]
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] USB: Palmas OTG Transceiver Driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [Fwd: [PATCH v2 0/4] TTY: port hangup and close fixes]
  • From: Jiri Slaby <jslaby@xxxxxxx>
• Re: [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: dwc3: dwc3-omap: return -EPROBE_DEFER if probe has not yet executed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/4] usb: dwc3: dwc3-omap: return -EPROBE_DEFER if probe has not yet executed
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH 1/4] usb: dwc3: dwc3-omap: set dma_mask for dwc3 inorder for host mode to work
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] usb: dwc3: dwc3-omap: set dma_mask for dwc3 inorder for host mode to work
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH 2/4] usb: dwc3: dwc3-omap: return -EPROBE_DEFER if probe has not yet executed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 2/4] usb: dwc3: dwc3-omap: return -EPROBE_DEFER if probe has not yet executed
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH v2 7/8] ARM: dts: omap5: add dwc3 omap dt data
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH 2/4] usb: dwc3: dwc3-omap: return -EPROBE_DEFER if probe has not yet executed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] usb: dwc3: dwc3-omap: set dma_mask for dwc3 inorder for host mode to work
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH v2 7/8] ARM: dts: omap5: add dwc3 omap dt data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 7/8] ARM: dts: omap5: add dwc3 omap dt data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 2/8] ARM: dts: omap: Add omap-usb2 dt data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 6/8] ARM: dts: omap5: Add omap-usb3 and omap-usb2 dt data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 0/8] ARM: dts: omap: Add dts data for USB
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 5/8] ARM: dts: omap5: Add ocp2scp data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 4/8] ARM: dts: omap5: Add omap control usb data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 1/8] ARM: dts: omap: Add omap control usb data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 3/8] ARM: dts: omap: Add usb_otg and glue data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 3/4] USB: Palmas OTG Transceiver Driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 1/4] usb: dwc3: dwc3-omap: set dma_mask for dwc3 inorder for host mode to work
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 0/4] usb: added palmas-usb driver and a few misc fixes
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 4/4] usb: musb: omap2430: replace *_* with *-* in property names
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/4] usb: dwc3: dwc3-omap: return -EPROBE_DEFER if probe has not yet executed
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] USB: storage: fix Huawei mode switching regression
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 0/7] USB: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 0/7] USB: don't recover device if suspend fails in system sleep
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 0/7] USB: don't recover device if suspend fails in system sleep
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 1/7] USB: adds comment on suspend callback
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 0/7] USB: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 0/7] USB: don't recover device if suspend fails in system sleep
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 7/7] usbnet: qmi_wwan: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: v3.8 regression: Huawei mode switching fails (was Re: [PATCH 2/2]linux-usb:optimize to match the Huawei USB storage devices and support new switch command)
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] USB: storage: fix Huawei mode switching regression
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] USB: storage: fix Huawei mode switching regression
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH] usb: musb: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: musb: remove all 'select' from Kconfig
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/1] usb: gadget: fsl_udc_core: Use module_platform_driver_probe macro
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] drivers/usb/gadget: beautify code, delete unused code
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] usb: musb: omap2430: fix omap_musb_mailbox glue check again
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 2/2] usb: musb: omap2430: fix sparse warning
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 0/7] USB: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] usb: gadget: fsl_udc_core: Use module_platform_driver_probe macro
  • From: Li Yang-R58472 <r58472@xxxxxxxxxxxxx>
• Re: [PATCH] usb/gadget: initialize gadget functions helper befor functions & gadgets
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 3/7] HCD files for the DWC2 driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH][v3] xhci: correctly enable interrupts
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: [PATCH] usb/gadget: initialize gadget functions helper befor functions & gadgets
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• Re: [PATCH] USB: storage: fix Huawei mode switching regression
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v6 0/7] DWC2 DesignWare HS OTG driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb/gadget: initialize gadget functions helper befor functions & gadgets
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• Re: [PATCH 5/5] usb: chipidea: udc: add multiple td support to hardware_{en,de}queue
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• RE: v3.8 regression: Huawei mode switching fails (was Re: [PATCH 2/2]linux-usb:optimize to match the Huawei USB storage devices and support new switch command)
  • From: "Fangxiaozhi (Franko)" <fangxiaozhi@xxxxxxxxxx>
• [PATCH] USB: storage: in-kernel modeswitching is deprecated
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: v3.8 regression: Huawei mode switching fails (was Re: [PATCH 2/2]linux-usb:optimize to match the Huawei USB storage devices and support new switch command)
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• Re: [PATCH 4/5] usb: chipidea: udc: manage dynamic amount of tds with an linked list
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH] USB: storage: fix Huawei mode switching regression
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 7/7] usbnet: qmi_wwan: don't recover device if suspend fails in system sleep
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 0/7] USB: don't recover device if suspend fails in system sleep
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 0/7] USB: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 1/1] usb: gadget: fsl_udc_core: Use module_platform_driver_probe macro
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 7/7] usbnet: qmi_wwan: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 6/7] usbnet: smsc75xx: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 5/7] usbnet: smsc95xx: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 4/7] usbnet: cdc_mbim: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 3/7] USBHID: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 2/7] USB: serial: handle suspend failure path correctly
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 1/7] USB: adds comment on suspend callback
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 0/7] USB: don't recover device if suspend fails in system sleep
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Bo Shen <voice.shen@xxxxxxxxx>
• Re: [PATCH] drivers/usb/gadget: using strlcpy instead of strncpy
  • From: Chen Gang <gang.chen@xxxxxxxxxxx>
• RE: v3.8 regression: Huawei mode switching fails (was Re: [PATCH 2/2]linux-usb:optimize to match the Huawei USB storage devices and support new switch command)
  • From: "Fangxiaozhi (Franko)" <fangxiaozhi@xxxxxxxxxx>
• RE: [PATCH] USB: storage: fix Huawei mode switching regression
  • From: "Fangxiaozhi (Franko)" <fangxiaozhi@xxxxxxxxxx>
• Re: [V8 PATCH 02/16] usb: gadget: mv_udc: use PHY driver for udc
  • From: Chao Xie <xiechao.mail@xxxxxxxxx>
• Re: [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
  • From: Chao Xie <xiechao.mail@xxxxxxxxx>
• Re: [PATCH] drivers/usb/gadget: beautify code, delete unused code
  • From: Chen Gang <gang.chen@xxxxxxxxxxx>
• Re: [PATCH] drivers/usb/gadget: using strlcpy instead of strncpy
  • From: Chen Gang <gang.chen@xxxxxxxxxxx>
• Re: [GIT PULL] usb: fixes for v3.9-rc2
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: tegra: Reset Tegra USB controller before init
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 0/7] DWC2 DesignWare HS OTG driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: storage: fix Huawei mode switching regression
  • From: Josua Dietze <digidietze@xxxxxxxxxxxxxxx>
• Re: [RFC] USB: storage: in-kernel modeswitching is deprecated
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• [PATCH] usb: gadget: composite: fix kernel-doc warnings
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] USB: fix trivial usb_device kernel-doc errors
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFC] USB: storage: in-kernel modeswitching is deprecated
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb/gadget: initialize gadget functions helper befor functions & gadgets
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [RFC] USB: storage: in-kernel modeswitching is deprecated
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [RFC] USB: storage: in-kernel modeswitching is deprecated
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH] usb/gadget: initialize gadget functions helper befor functions & gadgets
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH v6 7/7] Add a MAINTAINERS entry for the DWC2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v6 6/7] Hook the DWC2 driver into the build system
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v6 5/7] PCI bus interface for the DWC2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v6 4/7] HCD descriptor DMA support for the DWC2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v6 3/7] HCD files for the DWC2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v6 2/7] Core files for the DWC2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v6 1/7] usb: common: add a routine to print the OTG state
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v6 0/7] DWC2 DesignWare HS OTG driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH] USB: storage: fix Huawei mode switching regression
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 3.8-stable] usbnet: smsc95xx: fix suspend failure
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: tegra: Reset Tegra USB controller before init
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH][v3] xhci: correctly enable interrupts
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH][v3] xhci: correctly enable interrupts
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: storage: fix Huawei mode switching regression
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: tegra: Reset Tegra USB controller before init
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] USB: storage: fix Huawei mode switching regression
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH][v3] xhci: correctly enable interrupts
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: [PATCH][v2] xhci: correctly enable interrupts
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: [PATCH v2 06/10] usb: xhci: Enable runtime pm in xhci-plat
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 06/10] usb: xhci: Enable runtime pm in xhci-plat
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/10] usb: phy: Add APIs for runtime power management
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH][v2] xhci: correctly enable interrupts
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC] usb: dwc3: Get PHY from platform specific dwc3 dt node.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/5] usb: musb: ux500: add otg notifier support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] drivers/usb/gadget: beautify code, delete unused code
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: storage: fix Huawei mode switching regression
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• Re: [V8 PATCH 02/16] usb: gadget: mv_udc: use PHY driver for udc
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [V8 PATCH 01/16] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH][v2] xhci: correctly enable interrupts
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] USB: storage: fix Huawei mode switching regression
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH -v3 13/23] uwb: rename random32() to prandom_u32()
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [GIT PULL] usb: fixes for v3.9-rc2
  • From: Felipe Balbi <balbi@xxxxxx>
• v3.8 regression: Huawei mode switching fails (was Re: [PATCH 2/2]linux-usb:optimize to match the Huawei USB storage devices and support new switch command)
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH][v2] xhci: correctly enable interrupts
  • From: David Härdeman <david@xxxxxxxxxxx>
• Re: [PATCH v10 6/8] usb: chipidea: imx: add internal vbus regulator control
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/5] usb: chipidea: udc: move _ep_queue into an unlocked function
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [PATCH 3.8-stable] usbnet: smsc95xx: fix suspend failure
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: phy: omap-control-usb: Convert to devm_ioremap_resource()
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: phy: omap-usb3: Convert to devm_ioremap_resource()
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: phy: samsung: Convert to devm_ioremap_resource()
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] fusb300_udc: modify stall clear and idma reset procedure
  • From: Yuan-Hsin Chen <yuanlmm@xxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• [PATCH 3/3] usb: phy: omap-control-usb: Convert to devm_ioremap_resource()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 2/3] usb: phy: omap-usb3: Convert to devm_ioremap_resource()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 1/3] usb: phy: samsung: Convert to devm_ioremap_resource()
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH][v2] xhci: correctly enable interrupts
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 06/10] usb: xhci: Enable runtime pm in xhci-plat
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• RE: [PATCH] usb: host: tegra: Reset Tegra USB controller before init
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Bo Shen <voice.shen@xxxxxxxxx>
• Re: [PATCH 3/5] usb: chipidea: udc: add the define TD_COUNT and fix all users
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Fwd: a usb regression in kernel 2.6.37 and upper
  • From: Joshua <joshua520@xxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v2 2/5] usb: chipidea: udc: configure iso endpoints
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] usb: chipidea: udc: move _ep_queue into an unlocked function
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• RE: Not enough resource for old configuration after USB bus reset
  • From: Soar Hung <soarhung@xxxxxxxxxxx>
• Re: [PATCH 0/5] usb: musb: am335x support
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH 3/3] usb: Make sure each c67x00 TD has been executed
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH 0/5] usb: musb: am335x support
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH] drivers/usb/gadget: using strlcpy instead of strncpy
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: usb-skeleton.c: fix blocked forever in skel_read
  • From: duxing2007 <duxing2007@xxxxxxxxx>
• Re: [PATCH resubmit] ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v2 06/10] usb: xhci: Enable runtime pm in xhci-plat
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] drivers/usb/gadget: using strlcpy instead of strncpy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 06/10] usb: xhci: Enable runtime pm in xhci-plat
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 06/10] usb: xhci: Enable runtime pm in xhci-plat
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 06/10] usb: xhci: Enable runtime pm in xhci-plat
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/5] usb: musb: am335x support
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: [PATCH 0/5] usb: musb: am335x support
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 06/10] usb: xhci: Enable runtime pm in xhci-plat
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [usb gadget] WARNING: at kernel/mutex.c:198 __mutex_lock_common()
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• Re: [usb gadget] WARNING: at kernel/mutex.c:198 __mutex_lock_common()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [usb gadget] WARNING: at kernel/mutex.c:198 __mutex_lock_common()
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• [PATCH v2 00/10] usb: dwc3/xhci/phy: Enable runtime power management
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v2 02/10] USB: dwc3: Adjust runtime pm to allow autosuspend
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH] usb: dwc3: Set DWC3 context's mode based on selected mode.
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v2 04/10] usb: dwc3: Add runtime power management callbacks
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v2 03/10] usb: dwc3: Enable runtime pm only after PHYs are initialized
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v2 05/10] usb: dwc3: exynos: Enable runtime power management
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v2 07/10] usb: phy: samsung: Enable runtime power management on usb3phy
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v2 08/10] usb: phy: samsung: Add support for external reference clock
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v2 09/10] usb: phy: samsung: Add support for PHY ref_clk gpio
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v2 06/10] usb: xhci: Enable runtime pm in xhci-plat
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v2 01/10] usb: phy: Add APIs for runtime power management
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• RE: [PATCH 00/12] UVC gadget patches for v3.10
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• Re: Testing for hardware bug in EHCI controllers
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• [PATCH resubmit] ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver
  • From: Freddy Xin <freddy@xxxxxxxxxxx>
• Re: [PATCH 0/5] usb: musb: am335x support
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [GIT PATCH] USB patch revert for 3.9-rc1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] usb: chipidea: AR933x platform support for the chipidea driver
  • From: Svetoslav Neykov <svetoslav@xxxxxxxxxxx>
• [PATCH v2 1/2] usb: chipidea: big-endian support
  • From: Svetoslav Neykov <svetoslav@xxxxxxxxxxx>
• [PATCH v2 0/2] Chipidea driver support for the AR933x platform
  • From: Svetoslav Neykov <svetoslav@xxxxxxxxxxx>
• Re: [PATCH 0/5] usb: musb: am335x support
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH resubmit] ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH 02/12] usb: gadget/uvc: Rename STATUS_BYTECOUNT to UVC_STATUS_MAX_PACKET_SIZE
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 04/12] usb: gadget/uvc: Merge the SS/HS/FS control endpoint descriptors
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 00/12] UVC gadget patches for v3.10
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 05/12] usb: gadget/uvc: Merge the streaming maxpacket and mult parameters
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 03/12] usb: gadget/uvc: Fix coding style issues introduced by SS support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 06/12] usb: gadget/uvc: Configure the streaming endpoint based on the speed
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 07/12] usb: gadget/uvc: Add fix for UVC compliance test suite assertion 6.3.90 failure
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 08/12] usb: gadget/uvc: Add fix for UVC compliance test suite's assertion 6.1.25 failure
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 09/12] usb: gadget/uvc: Delay the status stage when setting alternate setting 1
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 10/12] usb: gadget/uvc: Make video streaming buffer size comply with USB3.0 SS
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 11/12] usb: gadget/uvc: Use GFP_ATOMIC under spin lock
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 12/12] usb: gadget/uvc: Use strlcpy instead of strncpy
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drivers/usb/gadget: using strlcpy instead of strncpy
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 01/12] usb: gadget/uvc: Clarify comment about string descriptors
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] usb: chipidea: udc: fixes, iso ep and multi td support
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [regression] external HDD in USB3 enclosure cannot be dynamically removed (Re: Linux 3.7.5)
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] usb: chipidea: udc: fixes, iso ep and multi td support
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: fix EP_BUSY in case of dequeue
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] USB: EHCI: don't check DMA values in QH overlays
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] USB: EHCI: work around silicon bug in Intel's EHCI controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] usb: chipidea: udc: fixes, iso ep and multi td support
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• isp1760: ptd and payload data flow
  • From: Richard Retanubun <richardretanubun@xxxxxxxxxxxxx>
• Re: [PATCH] usb: correctly enable interrupts for xhci
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/5] usb: chipidea: udc: add the define TD_COUNT and fix all users
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 4/5] usb: chipidea: udc: manage dynamic amount of tds with an linked list
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] usb: chipidea: udc: move _ep_queue into an unlocked function
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2 2/5] usb: chipidea: udc: configure iso endpoints
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 5/5] usb: chipidea: udc: add multiple td support to hardware_{en,de}queue
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 0/5] usb: chipidea: udc: fixes, iso ep and multi td support
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: correctly enable interrupts for xhci
  • From: David Härdeman <david@xxxxxxxxxxx>
• [PATCH] usb: correctly enable interrupts for xhci
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] usb: dwc3: fix EP_BUSY in case of dequeue
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH] pci: do not try to assign irq 255
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH RFC] usb: dwc3: Get PHY from platform specific dwc3 dt node.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: fix EP_BUSY in case of dequeue
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch] usb: storage: onetouch: tighten a range check
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 1/2] ACPI / glue: Add .match() callback to struct acpi_bus_type
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/5 V3] usb: call pm_runtime_put_noidle in pm_runtime_get_sync failed case
  • From: Li Fei <fei.li@xxxxxxxxx>
• [PATCH 4/5 V3] usb: call pm_runtime_put_noidle in pm_runtime_get_sync failed case
  • From: Li Fei <fei.li@xxxxxxxxx>
• RE: [PATCH 4/5 V2] usb: call pm_runtime_put_sync in pm_runtime_get_sync failed case
  • From: "Liu, Chuansheng" <chuansheng.liu@xxxxxxxxx>
• Re: [PATCH 4/5 V2] usb: call pm_runtime_put_sync in pm_runtime_get_sync failed case
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 4/5 V2] usb: call pm_runtime_put_sync in pm_runtime_get_sync failed case
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• RE: [PATCH 4/5 V2] usb: call pm_runtime_put_sync in pm_runtime_get_sync failed case
  • From: "Liu, Chuansheng" <chuansheng.liu@xxxxxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: About chipidea tree
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• RE: [PATCH 4/5 V2] usb: call pm_runtime_put_sync in pm_runtime_get_sync failed case
  • From: "Liu, Chuansheng" <chuansheng.liu@xxxxxxxxx>
• Re: [PATCH 4/5 V2] usb: call pm_runtime_put_sync in pm_runtime_get_sync failed case
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• RE: [PATCH 4/5 V2] usb: call pm_runtime_put_sync in pm_runtime_get_sync failed case
  • From: "Liu, Chuansheng" <chuansheng.liu@xxxxxxxxx>
• Re: [PATCH 2/2] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 1/2] ACPI / glue: Add .match() callback to struct acpi_bus_type
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 1/2] ACPI / glue: Add .match() callback to struct acpi_bus_type
  • From: Yinghai Lu <yinghai@xxxxxxxxxx>
• Re: [PATCH 2/2] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Jeff Garzik <jgarzik@xxxxxxxxx>
• [PATCH 1/2] ACPI / glue: Add .match() callback to struct acpi_bus_type
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH 2/2] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• RE: Problem with linux-3.7.7 (Stern - d01875f11f05f76fc471cec94d701201c1b34389)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] usb: Make sure each c67x00 TD has been executed
  • From: Dave Tubbs <dave.tubbs@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: Make sure each c67x00 TD has been executed
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: tegra: Reset Tegra USB controller before init
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] usb: host: tegra: Reset Tegra USB controller before init
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] usb: Make sure each c67x00 TD has been executed
  • From: Dave Tubbs <dave.tubbs@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: Make sure each c67x00 TD has been executed
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• [PATCH 3/3] usb: Make sure each c67x00 TD has been executed
  • From: Dave Tubbs <dave.tubbs@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: tegra: Reset Tegra USB controller before init
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] usb: host: tegra: Reset Tegra USB controller before init
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v4] xhci - correct comp_mode_recovery_timer on return from hibernate
  • From: Tony Camuso <tcamuso@xxxxxxxxxx>
• Re: [PATCH] pci: do not try to assign irq 255
  • From: Hannes Reinecke <hare@xxxxxxx>
• RE: [PATCH v4] xhci - correct comp_mode_recovery_timer on return from hibernate
  • From: "Cortes, Alexis" <alexis.cortes@xxxxxx>
• Re: [PATCH 4/5 V2] usb: call pm_runtime_put_sync in pm_runtime_get_sync failed case
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] usb: call pm_runtime_put_sync in pm_runtime_get_sync failed case
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: tegra: Reset Tegra USB controller before init
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC] usb: dwc3: Get PHY from platform specific dwc3 dt node.
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH 3/3] usb: Make sure each c67x00 TD has been executed
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: About chipidea tree
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] USB mxs-phy: use readl(), writel() instead of the _relaxed() versions
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: fix EP_BUSY in case of dequeue
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH 2/3] USB: add devicetree helpers for determining dr_mode and phy_type
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: About chipidea tree
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH 3/5] USB chipidea: introduce dual role mode pdata flags
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/5] USB chipidea: add PTW and PTS handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/5] USB chipidea: ci13xxx-imx: create dynamic platformdata
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/5] USB chipidea i.MX: introduce dr_mode property
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 5/5] USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/5] chipidea-for-v3.10-v2: USB chipidea: make use of DT helpers in chipidea driver improve driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] USB mxs-phy: Register phy with framework
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/4] otg-for-v3.10-v2: separate phy code and add DT helper
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/4] USB: move bulk of otg/otg.c to phy/phy.c
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/4] USB mxs-phy: use readl(), writel() instead of the _relaxed() versions
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/4] USB mxs-phy: Register phy with framework
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/4] USB: add devicetree helpers for determining dr_mode and phy_type
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: fix EP_BUSY in case of dequeue
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/5] usb: musb: ux500_dma: add missing MEM resource check
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH 3/5] usb: musb: ux500: add otg notifier support
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH 4/5] usb: otg: ab8500-usb: drop support for ab8500 pre v2.0
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH 5/5] usb: otg: ab8500-usb: update irq handling code
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH 2/5] usb: musb: ux500: implement musb_set_vbus
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH 0/5] musb-ux500 and ab8500-usb updates
  • From: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
• [PATCH] usb: dwc3: fix EP_BUSY in case of dequeue
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: Make sure each c67x00 TD has been executed
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH 2/3] usb: c67x00 RetryCnt value in c67x00 TD should be 3
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH 1/3] usb: Correction to c67x00 TD data length mask
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH 3/3] USB mxs-phy: Register phy with framework
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] USB: add devicetree helpers for determining dr_mode and phy_type
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] USB mxs-phy: Register phy with framework
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/5 V2] usb: call pm_runtime_put_sync in pm_runtime_get_sync failed case
  • From: Li Fei <fei.li@xxxxxxxxx>
• RE: [PATCH 4/5] usb: call pm_runtime_put_sync in pm_runtime_get_sync failed case
  • From: "Li, Fei" <fei.li@xxxxxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/5] usb: call pm_runtime_put_sync in pm_runtime_get_sync failed case
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v10 6/8] usb: chipidea: imx: add internal vbus regulator control
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH] drivers/usb/gadget: beautify code, delete unused code
  • From: Chen Gang <gang.chen@xxxxxxxxxxx>
• [PATCH v2 corrected] usb/gadget: f_rndis: convert to new function interface with backward compatibility
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH 3/3] USB mxs-phy: Register phy with framework
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/5] usb: call pm_runtime_put_sync in pm_runtime_get_sync failed case
  • From: Li Fei <fei.li@xxxxxxxxx>
• Re: [PATCH 2/3] USB: add devicetree helpers for determining dr_mode and phy_type
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v10 6/8] usb: chipidea: imx: add internal vbus regulator control
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: host: tegra: Reset Tegra USB controller before init
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: [PATCH v10 4/8] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: kishon <kishon@xxxxxx>
• Re: [PATCH v10 6/8] usb: chipidea: imx: add internal vbus regulator control
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [patch] usb: gadget: u_uac1: NULL dereference on error path
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [patch] usb: gadget: f_uac1: silence an info leak warning
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: Re: Build break on usb-next with exynos_defconfig
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: Re: Build break on usb-next with exynos_defconfig
  • From: PADMAVATHI VENNA <padma.v@xxxxxxxxxxx>
• Re: [PATCH v10 8/8] usb: chipidea: imx: fix the error that using uninitialized pointer
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v10 8/8] usb: chipidea: imx: fix the error that using uninitialized pointer
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] xhci - correct comp_mode_recovery_timer on return from hibernate
  • From: Tony Camuso <tcamuso@xxxxxxxxxx>
• Re: [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH v4] xhci - correct comp_mode_recovery_timer on return from hibernate
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 3/3] usb: Make sure each c67x00 TD has been executed
  • From: Dave Tubbs <dave.tubbs@xxxxxxxxxxxxxx>
• [PATCH 2/3] usb: c67x00 RetryCnt value in c67x00 TD should be 3
  • From: Dave Tubbs <dave.tubbs@xxxxxxxxxxxxxx>
• [PATCH 1/3] usb: Correction to c67x00 TD data length mask
  • From: Dave Tubbs <dave.tubbs@xxxxxxxxxxxxxx>
• Re: [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Yinghai Lu <yinghai@xxxxxxxxxx>
• Re: [PATCH] USB Storage: add support for Maxtor One-Touch button
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• Re: [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• RE: [PATCH v5 3/6] HCD files for the DWC2 driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] xhci - correct comp_mode_recovery_timer on return from hibernate
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v5 3/6] HCD files for the DWC2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH v5 3/6] HCD files for the DWC2 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• HELP NEEDED PROFITABLE NOBLE BUSINESS DEAL TRANSACTION!!
  • From: "Dr.Benson Nkulunkulu" <benson.nkulunkulu.0.123.1.1@xxxxxxxxxxx>
• Re: [PATCH] pci: do not try to assign irq 255
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: [PATCH v10 6/8] usb: chipidea: imx: add internal vbus regulator control
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4] xhci - correct comp_mode_recovery_timer on return from hibernate
  • From: Tony Camuso <tcamuso@xxxxxxxxxx>
• Re: [PATCH] usb: limit OMAP related USB options to OMAP2PLUS platforms
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [PATCH] usb: limit OMAP related USB options to OMAP2PLUS platforms
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: limit OMAP related USB options to OMAP2PLUS platforms
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: c67x00 TD data length is 10 bits, correct TD_PORTLENMASK_DL.
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: Not enough resource for old configuration after USB bus reset
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCHv2] usb/net/asix_devices: Add USBNET HG20F9 ethernet dongle
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] net: cdc_ncm: tag Huawei devices (e.g. E5331) with FLAG_WWAN
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Problem with linux-3.7.7 (Stern - d01875f11f05f76fc471cec94d701201c1b34389)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: mx28 usb host fails on 3.8
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] chipidea-for-v3.10-v1: USB chipidea: make use of DT helpers in chipidea driver improve driver
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] otg-for-v3.10-v1: separate phy code and add DT helper
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH] otg-for-v3.9-v1: USB otg: fix usage of try_module_get() and module_put()
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH] USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH resend 0/5] USB: fixes for 3.9-rc
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 12/15] USB: quatech2: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 07/15] USB: mct_u232: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 03/15] USB: cypress_m8: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 09/15] USB: mos7840: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 11/15] USB: pl2303: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 01/15] USB: ark3116: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 08/15] USB: mos7840: fix broken TIOCMIWAIT
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 04/15] USB: f81232: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 05/15] USB: io_edgeport: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 15/15] USB: ti_usb_3410_5052: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 10/15] USB: oti6858: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 14/15] USB: ssu100: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 06/15] USB: io_ti: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 02/15] USB: ch341: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 13/15] USB: spcp8x5: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v2 00/15] USB: serial: fix TIOCMIWAIT and disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>