On Wed, Feb 27, 2013 at 03:11:12PM +0100, Marc Kleine-Budde wrote:
> Hello,
>
> this patch is intended for v3.9 and applies to Greg's usb/master tree. If fixes
> the use of try_module_get() and module_put() in all usb_get_phy functions.
>
> regards,
> Marc
>
>
> The following changes since commit 74e1a2a39355b2d3ae8c60c78d8add162c6d7183:
>
> Merge tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb (2013-02-21 12:20:00 -0800)
>
> are available in the git repository at:
>
>
> git://git.pengutronix.de/git/mkl/linux.git tags/otg-for-v3.9-v1
>
> for you to fetch changes up to 6bef020b4aebd7886281fb7fb37c788d5a365eea:
>
> USB otg: use try_module_get in all usb_get_phy functions and add missing module_put (2013-02-27 12:53:15 +0100)
>
> ----------------------------------------------------------------
> USB otg: add missing try_module_get and module_put
>
> Add try_module_get() to usb_get_phy() and usb_get_phy_dev(). Further the
> missing module_put() is added to usb_put_phy()
>
> ----------------------------------------------------------------
> Marc Kleine-Budde (1):
> USB otg: use try_module_get in all usb_get_phy functions and add missing module_put
>
> drivers/usb/otg/otg.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
>
>
>
Hi,
with this series plus
otg-for-v3.10-v1: separate phy code and add DT helper
chipidea-for-v3.10-v1 : USB chipidea: make use of DT helpers in chipidea driver improve driver
v9: Add tested id switch and vbus connect detect support for Chipidea
and
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 13b7053..1eeff3c 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -907,7 +907,8 @@
compatible = "fsl,imx28-usb", "fsl,imx27-usb";
reg = <0x80080000 0x10000>;
interrupts = <93>;
- clocks = <&clks 60>;
+ clocks = <&clks 60>, <&clks 60>, <&clks 60>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbphy = <&usbphy0>;
status = "disabled";
};
@@ -916,7 +917,8 @@
compatible = "fsl,imx28-usb", "fsl,imx27-usb";
reg = <0x80090000 0x10000>;
interrupts = <92>;
- clocks = <&clks 61>;
+ clocks = <&clks 61>, <&clks 61>, <&clks 61>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbphy = <&usbphy1>;
status = "disabled";
};
I have USB otg+host working on v3.8 on an i.MX28.
So,
Tested-by: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
Regards,
Steffen
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
