Hi Joshua, 2.6.37 is a few years old by now, and isn't being updated with bug fixes. I recommend trying the latest stable kernel instead (3.8.1). Is there a particular reason you needed to stick with Ubuntu 10.04 instead of 12.04? Sarah Sharp On Mon, Mar 04, 2013 at 01:28:06PM +0800, Joshua wrote: > ---------- Forwarded message ---------- > From: Joshua <joshua520@xxxxxxxxx> > Date: Mon, Mar 4, 2013 at 1:24 PM > Subject: a usb regression in kernel 2.6.37 and upper > To: linux-usb@xxxxxxxxxxxxxxx > > > Hi Experts, > > I have a old tablet netbook named Touchpad B16 from Hanwang Company. I have > installed Ubuntu 10.04 with kernel 2.6.32. > The input usb device(pid:8408,vid 0b57) was working good. But when I upgrade > the kernel to 2.6.37. The device keeping disconnect and connect. > I had tried with 2.6.36, it also works. > > I had viewed a lot of kernel change log for 2.6.37. Unfortunately, I found > nothing related with this issue. Could you please give me some comments or > help? > > This is the dmesg info > > > <7>[ 0.530700] PCI: max bus depth: 1 pci_try_num: 2 > <6>[ 0.530737] pci 0000:00:1c.1: BAR 9: assigned [mem > 0x80000000-0x801fffff pref] > <6>[ 0.530747] pci 0000:00:1c.0: BAR 9: assigned [mem > 0x80200000-0x803fffff pref] > <6>[ 0.530757] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] > <6>[ 0.530764] pci 0000:00:1c.0: PCI bridge to [bus 01-01] > <6>[ 0.530772] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] > <6>[ 0.530782] pci 0000:00:1c.0: bridge window [mem > 0xcfc00000-0xcfcfffff] > <6>[ 0.530790] pci 0000:00:1c.0: bridge window [mem > 0x80200000-0x803fffff pref] > <6>[ 0.530801] pci 0000:00:1c.1: PCI bridge to [bus 02-02] > <6>[ 0.530808] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] > <6>[ 0.530817] pci 0000:00:1c.1: bridge window [mem > 0xcfd00000-0xcfdfffff] > <6>[ 0.530826] pci 0000:00:1c.1: bridge window [mem > 0x80000000-0x801fffff pref] > <6>[ 0.530846] pci 0000:00:1c.0: enabling device (0106 -> 0107) > <6>[ 0.530878] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ > 16 > <7>[ 0.530888] pci 0000:00:1c.0: setting latency timer to 64 > <6>[ 0.530908] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ > 17 > <7>[ 0.530917] pci 0000:00:1c.1: setting latency timer to 64 > <7>[ 0.530926] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > <7>[ 0.530932] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > <7>[ 0.530939] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > <7>[ 0.530945] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] > <7>[ 0.530952] pci_bus 0000:00: resource 8 [mem 0x3f800000-0xdfffffff] > <7>[ 0.530958] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff] > <7>[ 0.530965] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] > <7>[ 0.530971] pci_bus 0000:01: resource 1 [mem 0xcfc00000-0xcfcfffff] > <7>[ 0.530978] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff > pref] > <7>[ 0.530985] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] > <7>[ 0.530991] pci_bus 0000:02: resource 1 [mem 0xcfd00000-0xcfdfffff] > <7>[ 0.530997] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff > pref] > <6>[ 0.531132] NET: Registered protocol family 2 > <6>[ 0.531273] IP route cache hash table entries: 32768 (order: 5, 131072 > bytes) > <6>[ 0.531886] TCP established hash table entries: 131072 (order: 8, > 1048576 bytes) > <6>[ 0.533050] TCP bind hash table entries: 65536 (order: 7, 524288 > bytes) > <6>[ 0.533712] TCP: Hash tables configured (established 131072 bind > 65536) > <6>[ 0.533720] TCP reno registered > <6>[ 0.533730] UDP hash table entries: 512 (order: 2, 16384 bytes) > <6>[ 0.533757] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) > <6>[ 0.534046] NET: Registered protocol family 1 > <7>[ 0.534096] pci 0000:00:02.0: Boot video device > <6>[ 0.534166] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ > 20 > <7>[ 0.534177] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c1 > <7>[ 0.534182] pci 0000:00:1d.0: Performing full reset > <6>[ 0.534200] pci 0000:00:1d.0: PCI INT A disabled > <6>[ 0.534223] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ > 21 > <7>[ 0.534232] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c1 > <7>[ 0.534238] pci 0000:00:1d.1: Performing full reset > <6>[ 0.534254] pci 0000:00:1d.1: PCI INT B disabled > <6>[ 0.534276] pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ > 22 > <7>[ 0.534285] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c1 > <7>[ 0.534290] pci 0000:00:1d.2: Performing full reset > <6>[ 0.534307] pci 0000:00:1d.2: PCI INT C disabled > <6>[ 0.534330] pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ > 23 > <6>[ 0.534373] pci 0000:00:1d.7: PCI INT D disabled > <7>[ 0.534412] PCI: CLS 32 bytes, default 64 > <6>[ 0.534524] Trying to unpack rootfs image as initramfs... > <6>[ 0.589060] Freeing initrd memory: 1272k freed > <6>[ 0.592809] microcode: CPU0 sig=0x106c2, pf=0x1, revision=0x217 > <6>[ 0.592824] microcode: CPU1 sig=0x106c2, pf=0x1, revision=0x217 > <6>[ 0.592930] microcode: Microcode Update Driver: v2.00 > <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba > <6>[ 0.596372] ashmem: initialized > <5>[ 0.596514] VFS: Disk quotas dquot_6.5.2 > <4>[ 0.596587] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > <6>[ 0.596953] squashfs: version 4.0 (2009/01/31) Phillip Lougher > <6>[ 0.597020] fuse init (API version 7.16) > <6>[ 0.597195] msgmni has been set to 1759 > <6>[ 0.597954] io scheduler noop registered > <6>[ 0.597960] io scheduler deadline registered > <6>[ 0.598001] io scheduler cfq registered (default) > <6>[ 0.598565] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > <7>[ 0.603663] power_supply ADP1: uevent > <7>[ 0.603671] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 > <7>[ 0.605592] power_supply ADP1: prop ONLINE=1 > <7>[ 0.605695] power_supply ADP1: power_supply_changed > <6>[ 0.605708] ACPI: AC Adapter [ADP1] (on-line) > <7>[ 0.605749] power_supply ADP1: power_supply_changed_work > <6>[ 0.606019] input: Power Button as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 > <6>[ 0.606031] ACPI: Power Button [PWRB] > <6>[ 0.606203] input: Lid Switch as > /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 > <6>[ 0.606251] ACPI: Lid Switch [LID] > <7>[ 0.606565] ACPI: acpi_idle registered with cpuidle > <7>[ 0.607866] power_supply ADP1: power_supply_update_gen_leds 1 > <7>[ 0.607893] power_supply ADP1: uevent > <7>[ 0.607905] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 > <7>[ 0.610602] power_supply ADP1: prop ONLINE=1 > <7>[ 0.639031] power_supply BAT0: uevent > <7>[ 0.639038] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > <7>[ 0.674109] power_supply BAT0: prop STATUS=Unknown > <7>[ 0.674120] power_supply BAT0: prop PRESENT=1 > <7>[ 0.674128] power_supply BAT0: prop TECHNOLOGY=Li-ion > <7>[ 0.674135] power_supply BAT0: prop CYCLE_COUNT=0 > <7>[ 0.674143] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=7400000 > <7>[ 0.674150] power_supply BAT0: prop VOLTAGE_NOW=8320000 > <7>[ 0.674157] power_supply BAT0: prop CURRENT_NOW=65535000 > <7>[ 0.674165] power_supply BAT0: prop CHARGE_FULL_DESIGN=2700000 > <7>[ 0.674172] power_supply BAT0: prop CHARGE_FULL=2919000 > <7>[ 0.674179] power_supply BAT0: prop CHARGE_NOW=2871000 > <7>[ 0.674186] power_supply BAT0: prop MODEL_NAME=Menlow > <7>[ 0.674193] power_supply BAT0: prop MANUFACTURER=LC Computer > <7>[ 0.674200] power_supply BAT0: prop SERIAL_NUMBER=53001 > <7>[ 0.674308] power_supply BAT0: power_supply_changed > <6>[ 0.674344] ACPI: Battery Slot [BAT0] (battery present) > <7>[ 0.674460] power_supply BAT0: power_supply_changed_work > <7>[ 0.674472] power_supply BAT0: power_supply_update_bat_leds 0 > <7>[ 0.674498] power_supply BAT0: uevent > <7>[ 0.674505] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > <7>[ 0.674516] power_supply BAT0: prop STATUS=Unknown > <7>[ 0.674523] power_supply BAT0: prop PRESENT=1 > <7>[ 0.674530] power_supply BAT0: prop TECHNOLOGY=Li-ion > <7>[ 0.674537] power_supply BAT0: prop CYCLE_COUNT=0 > <7>[ 0.674544] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=7400000 > <7>[ 0.674552] power_supply BAT0: prop VOLTAGE_NOW=8320000 > <7>[ 0.674559] power_supply BAT0: prop CURRENT_NOW=65535000 > <7>[ 0.674566] power_supply BAT0: prop CHARGE_FULL_DESIGN=2700000 > <7>[ 0.674574] power_supply BAT0: prop CHARGE_FULL=2919000 > <7>[ 0.674581] power_supply BAT0: prop CHARGE_NOW=2871000 > <7>[ 0.674588] power_supply BAT0: prop MODEL_NAME=Menlow > <7>[ 0.674595] power_supply BAT0: prop MANUFACTURER=LC Computer > <7>[ 0.674602] power_supply BAT0: prop SERIAL_NUMBER=53001 > <6>[ 0.723183] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > <6>[ 1.141177] Linux agpgart interface v0.103 > <6>[ 1.145673] brd: module loaded > <6>[ 1.147793] loop: module loaded > <7>[ 1.148240] ahci 0000:02:00.0: version 3.0 > <6>[ 1.148272] ahci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ > 17 > <6>[ 1.160058] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps > 0x3 impl SATA mode > <6>[ 1.160068] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio > slum part > <7>[ 1.160079] ahci 0000:02:00.0: setting latency timer to 64 > <6>[ 1.161293] scsi0 : ahci > <6>[ 1.161629] scsi1 : ahci > <6>[ 1.161950] ata1: SATA max UDMA/133 abar m8192@0xcfdfe000 port > 0xcfdfe100 irq 17 > <6>[ 1.161960] ata2: SATA max UDMA/133 abar m8192@0xcfdfe000 port > 0xcfdfe180 irq 17 > <7>[ 1.162296] pata_sch 0000:00:1f.1: version 0.2 > <7>[ 1.162384] pata_sch 0000:00:1f.1: setting latency timer to 64 > <6>[ 1.163360] scsi2 : pata_sch > <6>[ 1.163610] scsi3 : pata_sch > <6>[ 1.164268] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 > irq 14 > <6>[ 1.164276] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 > irq 15 > <6>[ 1.165737] tun: Universal TUN/TAP device driver, 1.6 > <6>[ 1.165743] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> > <6>[ 1.166102] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > <7>[ 1.166111] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 > <6>[ 1.166174] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> > IRQ 23 > <7>[ 1.166217] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > <6>[ 1.166225] ehci_hcd 0000:00:1d.7: EHCI Host Controller > <6>[ 1.166240] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned > bus number 1 > <7>[ 1.166259] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103208 dbg=1 > cc=3 pcc=2 ordered !ppc ports=8 > <7>[ 1.166270] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 > uframes 1024 64 bit addr > <6>[ 1.166315] ehci_hcd 0000:00:1d.7: debug port 1 > <7>[ 1.166326] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 > ithresh=8 period=1024 Reset HALT > <7>[ 1.170205] ehci_hcd 0000:00:1d.7: bogus port configuration: cc=3 x > pcc=2 < ports=8 > <7>[ 1.170219] ehci_hcd 0000:00:1d.7: cache line size of 32 is not > supported > <7>[ 1.170225] ehci_hcd 0000:00:1d.7: supports USB remote wakeup > <6>[ 1.170268] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff5bc00 > <7>[ 1.170279] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 > ithresh=8 period=1024 Reset HALT > <7>[ 1.174172] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 > ithresh=1 period=1024 RUN > <6>[ 1.190209] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > <7>[ 1.190295] usb usb1: default language 0x0409 > <7>[ 1.190311] usb usb1: udev 1, busnum 1, minor = 0 > <6>[ 1.190317] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 > <6>[ 1.190323] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > <6>[ 1.190330] usb usb1: Product: EHCI Host Controller > <6>[ 1.190335] usb usb1: Manufacturer: Linux 3.0.36-android-x86-eeepc+ > ehci_hcd > <6>[ 1.190341] usb usb1: SerialNumber: 0000:00:1d.7 > <7>[ 1.190743] usb usb1: usb_probe_device > <7>[ 1.190753] usb usb1: configuration #1 chosen from 1 choice > <7>[ 1.190773] usb usb1: adding 1-0:1.0 (config #1, interface 0) > <7>[ 1.190897] hub 1-0:1.0: usb_probe_interface > <7>[ 1.190904] hub 1-0:1.0: usb_probe_interface - got id > <6>[ 1.190909] hub 1-0:1.0: USB hub found > <6>[ 1.190920] hub 1-0:1.0: 8 ports detected > <7>[ 1.190925] hub 1-0:1.0: standalone hub > <7>[ 1.190929] hub 1-0:1.0: no power switching (usb 1.0) > <7>[ 1.190935] hub 1-0:1.0: individual port over-current protection > <7>[ 1.190940] hub 1-0:1.0: power on to power good time: 20ms > <7>[ 1.190950] hub 1-0:1.0: local power source is good > <7>[ 1.190956] hub 1-0:1.0: trying to enable port power on non-switchable > hub > <6>[ 1.191170] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > <7>[ 1.191177] ohci_hcd: block sizes: ed 64 td 64 > <6>[ 1.191294] uhci_hcd: USB Universal Host Controller Interface driver > <6>[ 1.191373] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> > IRQ 20 > <7>[ 1.191390] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > <6>[ 1.191398] uhci_hcd 0000:00:1d.0: UHCI Host Controller > <6>[ 1.191411] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned > bus number 2 > <6>[ 1.191427] uhci_hcd 0000:00:1d.0: detected 2 ports > <7>[ 1.191435] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = > 0x0000 > <7>[ 1.191441] uhci_hcd 0000:00:1d.0: Performing full reset > <7>[ 1.191458] uhci_hcd 0000:00:1d.0: supports USB remote wakeup > <6>[ 1.191498] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480 > <7>[ 1.191573] usb usb2: default language 0x0409 > <7>[ 1.191592] usb usb2: udev 1, busnum 2, minor = 128 > <6>[ 1.191598] usb usb2: New USB device found, idVendor=1d6b, > idProduct=0001 > <6>[ 1.191604] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > <6>[ 1.191611] usb usb2: Product: UHCI Host Controller > <6>[ 1.191616] usb usb2: Manufacturer: Linux 3.0.36-android-x86-eeepc+ > uhci_hcd > <6>[ 1.191622] usb usb2: SerialNumber: 0000:00:1d.0 > <7>[ 1.191986] usb usb2: usb_probe_device > <7>[ 1.191996] usb usb2: configuration #1 chosen from 1 choice > <7>[ 1.192015] usb usb2: adding 2-0:1.0 (config #1, interface 0) > <7>[ 1.192134] hub 2-0:1.0: usb_probe_interface > <7>[ 1.192140] hub 2-0:1.0: usb_probe_interface - got id > <6>[ 1.192146] hub 2-0:1.0: USB hub found > <6>[ 1.192157] hub 2-0:1.0: 2 ports detected > <7>[ 1.192162] hub 2-0:1.0: standalone hub > <7>[ 1.192166] hub 2-0:1.0: no power switching (usb 1.0) > <7>[ 1.192171] hub 2-0:1.0: individual port over-current protection > <7>[ 1.192177] hub 2-0:1.0: power on to power good time: 2ms > <7>[ 1.192187] hub 2-0:1.0: local power source is good > <7>[ 1.192192] hub 2-0:1.0: trying to enable port power on non-switchable > hub > <7>[ 1.192274] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 > <6>[ 1.192314] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> > IRQ 21 > <7>[ 1.192329] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > <6>[ 1.192336] uhci_hcd 0000:00:1d.1: UHCI Host Controller > <6>[ 1.192349] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned > bus number 3 > <6>[ 1.192366] uhci_hcd 0000:00:1d.1: detected 2 ports > <7>[ 1.192374] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = > 0x0000 > <7>[ 1.192380] uhci_hcd 0000:00:1d.1: Performing full reset > <7>[ 1.192397] uhci_hcd 0000:00:1d.1: supports USB remote wakeup > <6>[ 1.192435] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000e080 > <7>[ 1.192511] usb usb3: default language 0x0409 > <7>[ 1.192526] usb usb3: udev 1, busnum 3, minor = 256 > <6>[ 1.192532] usb usb3: New USB device found, idVendor=1d6b, > idProduct=0001 > <6>[ 1.192538] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > <6>[ 1.192544] usb usb3: Product: UHCI Host Controller > <6>[ 1.192550] usb usb3: Manufacturer: Linux 3.0.36-android-x86-eeepc+ > uhci_hcd > <6>[ 1.192555] usb usb3: SerialNumber: 0000:00:1d.1 > <7>[ 1.192886] usb usb3: usb_probe_device > <7>[ 1.192895] usb usb3: configuration #1 chosen from 1 choice > <7>[ 1.192914] usb usb3: adding 3-0:1.0 (config #1, interface 0) > <7>[ 1.193037] hub 3-0:1.0: usb_probe_interface > <7>[ 1.193044] hub 3-0:1.0: usb_probe_interface - got id > <6>[ 1.193049] hub 3-0:1.0: USB hub found > <6>[ 1.193060] hub 3-0:1.0: 2 ports detected > <7>[ 1.193065] hub 3-0:1.0: standalone hub > <7>[ 1.193069] hub 3-0:1.0: no power switching (usb 1.0) > <7>[ 1.193074] hub 3-0:1.0: individual port over-current protection > <7>[ 1.193080] hub 3-0:1.0: power on to power good time: 2ms > <7>[ 1.193089] hub 3-0:1.0: local power source is good > <7>[ 1.193095] hub 3-0:1.0: trying to enable port power on non-switchable > hub > <7>[ 1.193171] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 > <6>[ 1.193210] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> > IRQ 22 > <7>[ 1.193224] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > <6>[ 1.193231] uhci_hcd 0000:00:1d.2: UHCI Host Controller > <6>[ 1.193244] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned > bus number 4 > <6>[ 1.193258] uhci_hcd 0000:00:1d.2: detected 2 ports > <7>[ 1.193266] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = > 0x0000 > <7>[ 1.193271] uhci_hcd 0000:00:1d.2: Performing full reset > <7>[ 1.193289] uhci_hcd 0000:00:1d.2: supports USB remote wakeup > <6>[ 1.193328] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000ef00 > <7>[ 1.193404] usb usb4: default language 0x0409 > <7>[ 1.193419] usb usb4: udev 1, busnum 4, minor = 384 > <6>[ 1.193425] usb usb4: New USB device found, idVendor=1d6b, > idProduct=0001 > <6>[ 1.193432] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > <6>[ 1.193438] usb usb4: Product: UHCI Host Controller > <6>[ 1.193443] usb usb4: Manufacturer: Linux 3.0.36-android-x86-eeepc+ > uhci_hcd > <6>[ 1.193449] usb usb4: SerialNumber: 0000:00:1d.2 > <7>[ 1.193777] usb usb4: usb_probe_device > <7>[ 1.193786] usb usb4: configuration #1 chosen from 1 choice > <7>[ 1.193804] usb usb4: adding 4-0:1.0 (config #1, interface 0) > <7>[ 1.193925] hub 4-0:1.0: usb_probe_interface > <7>[ 1.193931] hub 4-0:1.0: usb_probe_interface - got id > <6>[ 1.193937] hub 4-0:1.0: USB hub found > <6>[ 1.193949] hub 4-0:1.0: 2 ports detected > <7>[ 1.193954] hub 4-0:1.0: standalone hub > <7>[ 1.193958] hub 4-0:1.0: no power switching (usb 1.0) > <7>[ 1.193963] hub 4-0:1.0: individual port over-current protection > <7>[ 1.193969] hub 4-0:1.0: power on to power good time: 2ms > <7>[ 1.193978] hub 4-0:1.0: local power source is good > <7>[ 1.193984] hub 4-0:1.0: trying to enable port power on non-switchable > hub > <7>[ 1.194060] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 > <6>[ 1.194280] Initializing USB Mass Storage driver... > <6>[ 1.194422] usbcore: registered new interface driver usb-storage > <6>[ 1.194428] USB Mass Storage support registered. > <6>[ 1.194566] usbcore: registered new interface driver libusual > <6>[ 1.194798] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 > irq 1 > <4>[ 1.194805] i8042: PNP: PS/2 appears to have AUX port disabled, if > this is incorrect please boot with i8042.nopnp > <6>[ 1.196921] serio: i8042 KBD port at 0x60,0x64 irq 1 > <6>[ 1.197731] mousedev: PS/2 mouse device common for all mice > <6>[ 1.198306] usbcore: registered new interface driver hanwang > <6>[ 1.199084] rtc_cmos 00:02: RTC can wake from S4 > <7>[ 1.199153] rtc (null): alarm rollover: day > <6>[ 1.199466] using rtc device, rtc_cmos, for alarms > <7>[ 1.199476] rtc_cmos: dev (254:0) > <6>[ 1.199494] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 > <6>[ 1.199537] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet > irqs > <6>[ 1.199635] i2c /dev entries driver > <6>[ 1.199907] device-mapper: uevent: version 1.0.3 > <6>[ 1.200251] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) > initialised: dm-devel@xxxxxxxxxx > <6>[ 1.200300] cpuidle: using governor ladder > <6>[ 1.200305] cpuidle: using governor menu > <6>[ 1.200399] sdhci: Secure Digital Host Controller Interface driver > <6>[ 1.200404] sdhci: Copyright(c) Pierre Ossman > <6>[ 1.200877] usbcore: registered new interface driver usbhid > <6>[ 1.200883] usbhid: USB HID core driver > <6>[ 1.201404] logger: created 256K log 'log_main' > <6>[ 1.201608] logger: created 256K log 'log_events' > <6>[ 1.201792] logger: created 256K log 'log_radio' > <6>[ 1.201974] logger: created 256K log 'log_system' > <6>[ 1.202068] oprofile: using NMI interrupt. > <6>[ 1.202141] GACT probability NOT on > <6>[ 1.202149] Mirror/redirect action on > <6>[ 1.202154] u32 classifier > <6>[ 1.202157] Actions configured > <6>[ 1.202162] Netfilter messages via NETLINK v0.30. > <6>[ 1.202207] nf_conntrack version 0.5.0 (14074 buckets, 56296 max) > <6>[ 1.202722] ctnetlink v0.93: registering with nfnetlink. > <6>[ 1.202746] NF_TPROXY: Transparent proxy support initialized, version > 4.1.0 > <6>[ 1.202752] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. > <6>[ 1.203149] xt_time: kernel timezone is -0000 > <6>[ 1.204364] ip_tables: (C) 2000-2006 Netfilter Core Team > <6>[ 1.204466] arp_tables: (C) 2002 David S. Miller > <6>[ 1.204493] TCP cubic registered > <6>[ 1.204620] NET: Registered protocol family 10 > <6>[ 1.207589] Mobile IPv6 > <6>[ 1.207612] ip6_tables: (C) 2000-2006 Netfilter Core Team > <6>[ 1.207773] IPv6 over IPv4 tunneling driver > <6>[ 1.211465] NET: Registered protocol family 17 > <6>[ 1.211488] NET: Registered protocol family 15 > <6>[ 1.211504] NET: Registered protocol family 35 > <6>[ 1.211609] Using IPI No-Shortcut mode > <6>[ 1.212827] rtc_cmos 00:02: setting system clock to 2013-02-04 > 10:19:25 UTC (1359973165) > <6>[ 1.222469] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input2 > <7>[ 1.290068] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 > ACK POWER sig=j CSC CONNECT > <7>[ 1.290082] hub 1-0:1.0: port 1: status 0501 change 0001 > <7>[ 1.290099] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001803 0 > ACK POWER sig=j CSC CONNECT > <7>[ 1.290108] hub 1-0:1.0: port 2: status 0501 change 0001 > <7>[ 1.290127] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001803 0 > ACK POWER sig=j CSC CONNECT > <7>[ 1.290135] hub 1-0:1.0: port 4: status 0501 change 0001 > <7>[ 1.290153] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001803 0 > ACK POWER sig=j CSC CONNECT > <7>[ 1.290161] hub 1-0:1.0: port 6: status 0501 change 0001 > <7>[ 1.290180] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0 > ACK POWER sig=j CSC CONNECT > <7>[ 1.290188] hub 1-0:1.0: port 8: status 0501 change 0001 > <7>[ 1.290206] uhci_hcd 0000:00:1d.0: port 1 portsc 0082,00 > <7>[ 1.290220] uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00 > <7>[ 1.290239] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 1.290255] uhci_hcd 0000:00:1d.1: port 2 portsc 0082,00 > <7>[ 1.290274] uhci_hcd 0000:00:1d.2: port 2 portsc 0082,00 > <7>[ 1.390051] hub 1-0:1.0: state 7 ports 8 chg 0156 evt 0000 > <7>[ 1.390067] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s > <7>[ 1.450327] ehci_hcd 0000:00:1d.7: port 1 high speed > <7>[ 1.450338] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001005 0 > ACK POWER sig=se0 PE CONNECT > <6>[ 1.510041] usb 1-1: new high speed USB device number 2 using ehci_hcd > <6>[ 1.510055] ata2: SATA link down (SStatus 0 SControl 300) > <7>[ 1.570326] ehci_hcd 0000:00:1d.7: port 1 high speed > <7>[ 1.570337] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001005 0 > ACK POWER sig=se0 PE CONNECT > <6>[ 1.590028] Refined TSC clocksource calibration: 1595.991 MHz. > <6>[ 1.590039] Switching to clocksource tsc > <7>[ 1.660720] usb 1-1: skipped 1 descriptor after endpoint > <7>[ 1.660727] usb 1-1: skipped 1 descriptor after endpoint > <7>[ 1.660733] usb 1-1: skipped 1 descriptor after endpoint > <7>[ 1.660739] usb 1-1: skipped 1 descriptor after endpoint > <7>[ 1.660966] usb 1-1: default language 0x0409 > <7>[ 1.661342] usb 1-1: udev 2, busnum 1, minor = 1 > <6>[ 1.661348] usb 1-1: New USB device found, idVendor=059f, > idProduct=1046 > <6>[ 1.661355] usb 1-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 1.661361] usb 1-1: Product: FastKey USB3.0 > <6>[ 1.661366] usb 1-1: Manufacturer: LaCie > <6>[ 1.661371] usb 1-1: SerialNumber: 63422992156125000063 > <7>[ 1.661771] usb 1-1: usb_probe_device > <7>[ 1.661782] usb 1-1: configuration #1 chosen from 1 choice > <7>[ 1.661981] usb 1-1: adding 1-1:1.0 (config #1, interface 0) > <7>[ 1.662124] usb-storage 1-1:1.0: usb_probe_interface > <7>[ 1.662140] usb-storage 1-1:1.0: usb_probe_interface - got id > <6>[ 1.662234] scsi4 : usb-storage 1-1:1.0 > <7>[ 1.662527] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s > <6>[ 1.710041] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > <7>[ 1.720201] ehci_hcd 0000:00:1d.7: port 2 full speed --> companion > <7>[ 1.720213] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003801 0 > ACK POWER OWNER sig=j CONNECT > <7>[ 1.720222] hub 1-0:1.0: port 2 not reset yet, waiting 50ms > <7>[ 1.780024] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 1.780058] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s > <7>[ 1.840201] ehci_hcd 0000:00:1d.7: port 4 high speed > <7>[ 1.840212] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 > ACK POWER sig=se0 PE CONNECT > <6>[ 1.900023] usb 1-4: new high speed USB device number 4 using ehci_hcd > <7>[ 1.960325] ehci_hcd 0000:00:1d.7: port 4 high speed > <7>[ 1.960336] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 > ACK POWER sig=se0 PE CONNECT > <6>[ 2.013998] ata1.00: ATA-8: TOSHIBA MK1235GSL, PV010A, max UDMA/100 > <6>[ 2.014005] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth > 31/32), AA > <6>[ 2.014867] ata1.00: configured for UDMA/100 > <5>[ 2.015092] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1235GS > PV01 PQ: 0 ANSI: 5 > <5>[ 2.015575] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 > GB/111 GiB) > <5>[ 2.015754] sd 0:0:0:0: [sda] Write Protect is off > <7>[ 2.015764] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > <5>[ 2.015840] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > <5>[ 2.016006] sd 0:0:0:0: Attached scsi generic sg0 type 0 > <7>[ 2.051348] usb 1-4: skipped 1 descriptor after configuration > <7>[ 2.051356] usb 1-4: skipped 4 descriptors after interface > <7>[ 2.051363] usb 1-4: skipped 2 descriptors after interface > <7>[ 2.051371] usb 1-4: skipped 2 descriptors after endpoint > <7>[ 2.051376] usb 1-4: skipped 5 descriptors after interface > <7>[ 2.051383] usb 1-4: skipped 1 descriptor after endpoint > <7>[ 2.051389] usb 1-4: skipped 12 descriptors after endpoint > <7>[ 2.051396] usb 1-4: udev 4, busnum 1, minor = 3 > <6>[ 2.051402] usb 1-4: New USB device found, idVendor=eb1a, > idProduct=2776 > <6>[ 2.051408] usb 1-4: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > <7>[ 2.051820] usb 1-4: usb_probe_device > <7>[ 2.051829] usb 1-4: configuration #1 chosen from 1 choice > <7>[ 2.051990] usb 1-4: adding 1-4:1.2 (config #1, interface 2) > <7>[ 2.052143] usb 1-4: adding 1-4:1.3 (config #1, interface 3) > <7>[ 2.052284] usb 1-4: adding 1-4:1.0 (config #1, interface 0) > <7>[ 2.052444] usb 1-4: adding 1-4:1.1 (config #1, interface 1) > <7>[ 2.052626] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s > <6>[ 2.099713] sda: sda1 sda2 < sda5 sda6 > > <5>[ 2.100816] sd 0:0:0:0: [sda] Attached SCSI disk > <7>[ 2.110202] ehci_hcd 0000:00:1d.7: port 6 full speed --> companion > <7>[ 2.110215] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 003801 0 > ACK POWER OWNER sig=j CONNECT > <7>[ 2.110226] hub 1-0:1.0: port 6 not reset yet, waiting 50ms > <7>[ 2.170028] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 2.170072] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s > <6>[ 2.180874] Freeing unused kernel memory: 376k freed > <6>[ 2.181216] Write protecting the kernel text: 4268k > <6>[ 2.181270] Write protecting the kernel read-only data: 1524k > <7>[ 2.230335] ehci_hcd 0000:00:1d.7: port 8 high speed > <7>[ 2.230354] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001005 0 > ACK POWER sig=se0 PE CONNECT > <6>[ 2.290089] usb 1-8: new high speed USB device number 6 using ehci_hcd > <7>[ 2.350337] ehci_hcd 0000:00:1d.7: port 8 high speed > <7>[ 2.350355] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001005 0 > ACK POWER sig=se0 PE CONNECT > <7>[ 2.441260] usb 1-8: skipped 1 descriptor after configuration > <7>[ 2.441271] usb 1-8: skipped 5 descriptors after interface > <7>[ 2.441280] usb 1-8: skipped 1 descriptor after endpoint > <7>[ 2.441290] usb 1-8: skipped 12 descriptors after endpoint > <7>[ 2.441301] usb 1-8: udev 6, busnum 1, minor = 5 > <6>[ 2.441309] usb 1-8: New USB device found, idVendor=eb1a, > idProduct=2771 > <6>[ 2.441317] usb 1-8: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > <7>[ 2.442042] usb 1-8: usb_probe_device > <7>[ 2.442055] usb 1-8: configuration #1 chosen from 1 choice > <7>[ 2.442262] usb 1-8: adding 1-8:1.0 (config #1, interface 0) > <7>[ 2.444525] usb 1-8: adding 1-8:1.1 (config #1, interface 1) > <7>[ 2.446860] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004 > <7>[ 2.446886] uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00 > <7>[ 2.446907] hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s > <7>[ 2.540058] usb usb3: suspend_rh (auto-stop) > <7>[ 2.600063] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms > status 0x101 > <5>[ 2.661005] scsi 4:0:0:0: Direct-Access LaCie FastKey USB3.0 > 3468 PQ: 0 ANSI: 4 > <5>[ 2.664278] sd 4:0:0:0: [sdb] 58400768 512-byte logical blocks: (29.9 > GB/27.8 GiB) > <5>[ 2.665011] sd 4:0:0:0: Attached scsi generic sg1 type 0 > <5>[ 2.665228] sd 4:0:0:0: [sdb] Write Protect is off > <7>[ 2.665240] sd 4:0:0:0: [sdb] Mode Sense: 67 00 10 08 > <3>[ 2.666156] sd 4:0:0:0: [sdb] No Caching mode page present > <3>[ 2.666167] sd 4:0:0:0: [sdb] Assuming drive cache: write through > <3>[ 2.669487] sd 4:0:0:0: [sdb] No Caching mode page present > <3>[ 2.669495] sd 4:0:0:0: [sdb] Assuming drive cache: write through > <6>[ 2.670111] sdb: sdb1 > <3>[ 2.673124] sd 4:0:0:0: [sdb] No Caching mode page present > <3>[ 2.673132] sd 4:0:0:0: [sdb] Assuming drive cache: write through > <5>[ 2.673141] sd 4:0:0:0: [sdb] Attached SCSI disk > <6>[ 2.720040] usb 2-2: new full speed USB device number 2 using uhci_hcd > <7>[ 2.860021] usb 2-2: ep0 maxpacket = 8 > <7>[ 2.882571] usb 2-2: default language 0x0409 > <7>[ 2.898575] usb 2-2: udev 2, busnum 2, minor = 129 > <6>[ 2.898581] usb 2-2: New USB device found, idVendor=413c, > idProduct=1002 > <6>[ 2.898588] usb 2-2: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > <6>[ 2.898595] usb 2-2: Product: Dell USB Keyboard Hub > <6>[ 2.898600] usb 2-2: Manufacturer: Dell > <7>[ 2.899119] usb 2-2: usb_probe_device > <7>[ 2.899136] usb 2-2: configuration #1 chosen from 1 choice > <7>[ 2.904581] usb 2-2: adding 2-2:1.0 (config #1, interface 0) > <7>[ 2.906825] hub 2-2:1.0: usb_probe_interface > <7>[ 2.906838] hub 2-2:1.0: usb_probe_interface - got id > <6>[ 2.906882] hub 2-2:1.0: USB hub found > <6>[ 2.907598] hub 2-2:1.0: 3 ports detected > <7>[ 2.907643] hub 2-2:1.0: compound device; port removable status: FRR > <7>[ 2.907652] hub 2-2:1.0: individual port power switching > <7>[ 2.907659] hub 2-2:1.0: individual port over-current protection > <7>[ 2.907667] hub 2-2:1.0: power on to power good time: 100ms > <7>[ 2.908587] hub 2-2:1.0: hub controller current requirement: 90mA > <7>[ 2.908595] hub 2-2:1.0: 100mA bus power budget for each child > <7>[ 2.909576] hub 2-2:1.0: enabling power on all ports > <7>[ 2.912640] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 > <7>[ 2.912649] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004 > <7>[ 2.912663] uhci_hcd 0000:00:1d.2: port 2 portsc 0093,00 > <7>[ 2.912676] hub 4-0:1.0: port 2, status 0101, change 0001, 12 Mb/s > <3>[ 3.000179] VFS: could not find a valid V7 on sda. > <7>[ 3.011577] hub 2-2:1.0: port 1: status 0101 change 0001 > <7>[ 3.014572] hub 2-2:1.0: port 3: status 0301 change 0001 > <7>[ 3.070024] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms > status 0x101 > <7>[ 3.110029] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, > phase 0, 12 us > <6>[ 3.190094] usb 4-2: new full speed USB device number 2 using uhci_hcd > <7>[ 3.344581] usb 4-2: udev 2, busnum 4, minor = 385 > <6>[ 3.344589] usb 4-2: New USB device found, idVendor=0cf3, > idProduct=3000 > <6>[ 3.344596] usb 4-2: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > <7>[ 3.345113] usb 4-2: usb_probe_device > <7>[ 3.345127] usb 4-2: configuration #1 chosen from 1 choice > <7>[ 3.348599] usb 4-2: adding 4-2:1.0 (config #1, interface 0) > <7>[ 3.348949] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 3.348980] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 3.349002] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 3.500030] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 3.500054] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 3.500079] usb usb3: wakeup_rh (auto-start) > <7>[ 3.560025] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 3.560061] hub 2-2:1.0: state 7 ports 3 chg 000a evt 0000 > <7>[ 3.561577] hub 2-2:1.0: port 1, status 0101, change 0000, 12 Mb/s > <4>[ 3.570068] mount: sending ioctl 5310 to a partition! > <4>[ 3.570075] mount: sending ioctl 5310 to a partition! > <6>[ 3.641580] usb 2-2.1: new full speed USB device number 3 using > uhci_hcd > <3>[ 3.680184] VFS: could not find a valid V7 on sda1. > <7>[ 3.740019] usb 2-2.1: ep0 maxpacket = 8 > <7>[ 3.761624] usb 2-2.1: skipped 1 descriptor after interface > <7>[ 3.761638] usb 2-2.1: skipped 1 descriptor after interface > <7>[ 3.766588] usb 2-2.1: default language 0x0409 > <7>[ 3.782574] usb 2-2.1: udev 3, busnum 2, minor = 130 > <6>[ 3.782581] usb 2-2.1: New USB device found, idVendor=413c, > idProduct=2002 > <6>[ 3.782588] usb 2-2.1: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > <6>[ 3.782595] usb 2-2.1: Product: Dell USB Keyboard Hub > <6>[ 3.782600] usb 2-2.1: Manufacturer: Dell > <7>[ 3.783155] usb 2-2.1: usb_probe_device > <7>[ 3.783174] usb 2-2.1: configuration #1 chosen from 1 choice > <7>[ 3.787579] usb 2-2.1: adding 2-2.1:1.0 (config #1, interface 0) > <7>[ 3.789824] usbhid 2-2.1:1.0: usb_probe_interface > <7>[ 3.789836] usbhid 2-2.1:1.0: usb_probe_interface - got id > <6>[ 3.792903] input: Dell Dell USB Keyboard Hub as > /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input3 > <7>[ 3.792944] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 16, > phase 8, 17 us > <6>[ 3.794858] generic-usb 0003:413C:2002.0001: input,hidraw0: USB HID > v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.0-2.1/input0 > <7>[ 3.794926] usb 2-2.1: adding 2-2.1:1.1 (config #1, interface 1) > <7>[ 3.796861] usbhid 2-2.1:1.1: usb_probe_interface > <7>[ 3.796875] usbhid 2-2.1:1.1: usb_probe_interface - got id > <6>[ 3.806926] input: Dell Dell USB Keyboard Hub as > /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input4 > <7>[ 3.806964] uhci_hcd 0000:00:1d.0: reserve dev 3 ep82-INT, period 32, > phase 16, 14 us > <6>[ 3.808804] generic-usb 0003:413C:2002.0002: input,hidraw1: USB HID > v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.0-2.1/input1 > <7>[ 3.808898] hub 2-2:1.0: 410mA power budget left > <7>[ 3.809617] hub 2-2:1.0: port 3, status 0301, change 0000, 1.5 Mb/s > <6>[ 3.891590] usb 2-2.3: new low speed USB device number 4 using > uhci_hcd > <7>[ 4.008601] usb 2-2.3: skipped 1 descriptor after interface > <7>[ 4.013573] usb 2-2.3: default language 0x0409 > <7>[ 4.029589] usb 2-2.3: udev 4, busnum 2, minor = 131 > <6>[ 4.029597] usb 2-2.3: New USB device found, idVendor=046d, > idProduct=c016 > <6>[ 4.029605] usb 2-2.3: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > <6>[ 4.029611] usb 2-2.3: Product: Optical USB Mouse > <6>[ 4.029616] usb 2-2.3: Manufacturer: Logitech > <7>[ 4.030161] usb 2-2.3: usb_probe_device > <7>[ 4.030177] usb 2-2.3: configuration #1 chosen from 1 choice > <7>[ 4.032617] usb 2-2.3: adding 2-2.3:1.0 (config #1, interface 0) > <7>[ 4.032899] usbhid 2-2.3:1.0: usb_probe_interface > <7>[ 4.032911] usbhid 2-2.3:1.0: usb_probe_interface - got id > <6>[ 4.046696] input: Logitech Optical USB Mouse as > /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input5 > <6>[ 4.049979] generic-usb 0003:046D:C016.0003: input,hidraw2: USB HID > v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2.3/input0 > <7>[ 4.050102] hub 2-2:1.0: 310mA power budget left > <7>[ 4.050114] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 4.050136] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 4.050155] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <3>[ 4.131868] EXT3-fs (sda2): error: unable to read superblock > <7>[ 4.210059] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <3>[ 4.210138] EXT2-fs (sda2): error: unable to read superblock > <3>[ 4.300073] EXT4-fs (sda2): unable to read superblock > <6>[ 4.330029] usb 3-1: new low speed USB device number 2 using uhci_hcd > <7>[ 4.488581] usb 3-1: skipped 1 descriptor after interface > <7>[ 4.493573] usb 3-1: default language 0x0409 > <7>[ 4.512574] usb 3-1: udev 2, busnum 3, minor = 257 > <6>[ 4.512582] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 4.512588] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 4.512595] usb 3-1: Product: Tablet > <6>[ 4.512600] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 4.512605] usb 3-1: SerialNumber: V1.0 > <7>[ 4.513127] usb 3-1: usb_probe_device > <7>[ 4.513142] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 4.515618] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 4.515897] hanwang 3-1:1.0: usb_probe_interface > <7>[ 4.515908] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 4.515941] usbhid 3-1:1.0: usb_probe_interface > <7>[ 4.515949] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 4.521678] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 4.521697] hub 2-2:1.0: state 7 ports 3 chg 0000 evt 0008 > <4>[ 4.640076] mount: sending ioctl 5310 to a partition! > <4>[ 4.640084] mount: sending ioctl 5310 to a partition! > <4>[ 4.640100] isofs_fill_super: bread failed, dev=sda2, iso_blknum=16, > block=32 > <3>[ 4.760183] VFS: could not find a valid V7 on sda2. > <4>[ 5.180061] mount: sending ioctl 5310 to a partition! > <4>[ 5.180070] mount: sending ioctl 5310 to a partition! > <3>[ 5.280273] VFS: could not find a valid V7 on sda5. > <3>[ 5.414734] EXT3-fs (sda6): error: couldn't mount because of > unsupported optional features (240) > <3>[ 5.460190] EXT2-fs (sda6): error: couldn't mount because of > unsupported optional features (240) > <6>[ 5.539523] EXT4-fs (sda6): mounted filesystem with ordered data mode. > Opts: (null) > <7>[ 6.290062] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 6.290079] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 6.290097] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 6.290105] usb 3-1: USB disconnect, device number 2 > <7>[ 6.290110] usb 3-1: unregistering device > <7>[ 6.290116] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 6.290403] usb 3-1: usb_disable_device nuking all URBs > <7>[ 6.450032] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <3>[ 7.200205] VFS: could not find a valid V7 on sda. > <7>[ 7.540044] usb usb3: suspend_rh (auto-stop) > <4>[ 7.780059] mount: sending ioctl 5310 to a partition! > <4>[ 7.780067] mount: sending ioctl 5310 to a partition! > <3>[ 7.960233] VFS: could not find a valid V7 on sda1. > <7>[ 8.269128] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 8.269149] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 8.269166] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 8.420027] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 8.420052] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 8.420081] usb usb3: wakeup_rh (auto-start) > <3>[ 8.431920] EXT3-fs (sda2): error: unable to read superblock > <7>[ 8.480047] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 8.480089] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 8.480102] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 8.480114] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <3>[ 8.490104] EXT2-fs (sda2): error: unable to read superblock > <3>[ 8.600077] EXT4-fs (sda2): unable to read superblock > <7>[ 8.640030] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 8.760028] usb 3-1: new low speed USB device number 3 using uhci_hcd > <7>[ 8.918580] usb 3-1: skipped 1 descriptor after interface > <7>[ 8.923575] usb 3-1: default language 0x0409 > <7>[ 8.942580] usb 3-1: udev 3, busnum 3, minor = 258 > <6>[ 8.942587] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 8.942594] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 8.942600] usb 3-1: Product: Tablet > <6>[ 8.942605] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 8.942610] usb 3-1: SerialNumber: V1.0 > <7>[ 8.943130] usb 3-1: usb_probe_device > <7>[ 8.943146] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 8.945619] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 8.945913] hanwang 3-1:1.0: usb_probe_interface > <7>[ 8.945927] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 8.945959] usbhid 3-1:1.0: usb_probe_interface > <7>[ 8.945968] usbhid 3-1:1.0: usb_probe_interface - got id > <4>[ 8.950131] mount: sending ioctl 5310 to a partition! > <4>[ 8.950140] mount: sending ioctl 5310 to a partition! > <4>[ 8.950161] isofs_fill_super: bread failed, dev=sda2, iso_blknum=16, > block=32 > <7>[ 8.951674] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 8.951692] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <3>[ 9.150230] VFS: could not find a valid V7 on sda2. > <4>[ 9.610064] mount: sending ioctl 5310 to a partition! > <4>[ 9.610073] mount: sending ioctl 5310 to a partition! > <3>[ 9.710276] VFS: could not find a valid V7 on sda5. > <3>[ 9.843103] EXT3-fs (sda6): error: couldn't mount because of > unsupported optional features (240) > <3>[ 9.890189] EXT2-fs (sda6): error: couldn't mount because of > unsupported optional features (240) > <6>[ 9.967847] EXT4-fs (sda6): mounted filesystem with ordered data mode. > Opts: (null) > <7>[ 10.431240] ISO 9660 Extensions: Microsoft Joliet Level 3 > <7>[ 10.432232] ISO 9660 Extensions: RRIP_1991A > <3>[ 10.464208] EXT3-fs (loop0): error: couldn't mount because of > unsupported optional features (40) > <3>[ 10.500201] EXT2-fs (loop0): error: couldn't mount because of > unsupported optional features (40) > <6>[ 10.575452] EXT4-fs (loop0): mounted filesystem with ordered data > mode. Opts: (null) > <7>[ 10.790107] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 10.790129] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 10.790153] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 10.790164] usb 3-1: USB disconnect, device number 3 > <7>[ 10.790172] usb 3-1: unregistering device > <7>[ 10.790180] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 10.790529] usb 3-1: usb_disable_device nuking all URBs > <6>[ 10.886273] input: Video Bus as > /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 > <6>[ 10.886789] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: > no) > <6>[ 10.927279] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > <7>[ 10.927366] HDA Intel 0000:00:1b.0: setting latency timer to 64 > <7>[ 10.950040] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <6>[ 11.041743] hda_codec: ALC662 rev1: BIOS auto-probing. > <6>[ 11.048019] input: HDA Intel MID Mic as > /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 > <6>[ 11.050511] input: HDA Intel MID Headphone as > /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 > <4>[ 11.090866] ACPI: resource (null) [io 0x0480-0x04bf] conflicts with > ACPI region PHO_ [io 0x4bc-0x4bc] > <6>[ 11.090877] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > <4>[ 11.092026] lpc_sch: probe of 0000:00:1f.0 failed with error -16 > <6>[ 11.120085] cfg80211: Calling CRDA to update world regulatory domain > <6>[ 11.169320] ath9k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > <7>[ 11.169339] ath9k 0000:01:00.0: setting latency timer to 64 > <7>[ 11.218581] ath: EEPROM regdomain: 0x60 > <7>[ 11.218588] ath: EEPROM indicates we should expect a direct regpair > map > <7>[ 11.218597] ath: Country alpha2 being used: 00 > <7>[ 11.218601] ath: Regpair used: 0x60 > <7>[ 11.221499] ieee80211 phy0: Selected rate control algorithm > 'ath9k_rate_control' > <7>[ 11.233229] Registered led device: ath9k-phy0 > <6>[ 11.233257] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8b20000, > irq=16 > <6>[ 11.255823] input: PC Speaker as /devices/platform/pcspkr/input/input9 > <6>[ 11.291198] Linux video capture interface: v2.00 > <7>[ 11.297331] uvcvideo 1-4:1.0: usb_probe_interface > <7>[ 11.297346] uvcvideo 1-4:1.0: usb_probe_interface - got id > <6>[ 11.297401] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2776) > <6>[ 11.298957] input: UVC Camera (eb1a:2776) as > /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input10 > <7>[ 11.300818] uvcvideo 1-8:1.0: usb_probe_interface > <7>[ 11.300835] uvcvideo 1-8:1.0: usb_probe_interface - got id > <6>[ 11.300893] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2771) > <6>[ 11.302591] input: UVC Camera (eb1a:2771) as > /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input11 > <6>[ 11.304912] usbcore: registered new interface driver uvcvideo > <6>[ 11.304922] USB Video Class driver (v1.1.0) > <7>[ 11.323458] snd-usb-audio 1-4:1.2: usb_probe_interface > <7>[ 11.323480] snd-usb-audio 1-4:1.2: usb_probe_interface - got id > <6>[ 11.327220] usbcore: registered new interface driver snd-usb-audio > <6>[ 11.379059] Bluetooth: Core ver 2.16 > <6>[ 11.379285] NET: Registered protocol family 31 > <6>[ 11.379295] Bluetooth: HCI device and connection manager initialized > <6>[ 11.379304] Bluetooth: HCI socket layer initialized > <6>[ 11.379311] Bluetooth: L2CAP socket layer initialized > <6>[ 11.379330] Bluetooth: SCO socket layer initialized > <6>[ 11.381002] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > <6>[ 11.381013] Bluetooth: BNEP filters: protocol multicast > <6>[ 11.387970] Bluetooth: RFCOMM TTY layer initialized > <6>[ 11.387990] Bluetooth: RFCOMM socket layer initialized > <6>[ 11.387998] Bluetooth: RFCOMM ver 1.11 > <6>[ 11.418151] Bluetooth: Generic Bluetooth USB driver ver 0.6 > <6>[ 11.418421] usbcore: registered new interface driver btusb > <6>[ 11.426796] usbcore: registered new interface driver cdc_acm > <6>[ 11.426806] cdc_acm: USB Abstract Control Model driver for USB modems > and ISDN adapters > <6>[ 11.437295] usbcore: registered new interface driver usbserial > <6>[ 11.437306] usbserial: USB Serial Driver core > <6>[ 11.442693] USB Serial support registered for GSM modem (1-port) > <6>[ 11.444268] usbcore: registered new interface driver option > <6>[ 11.444277] option: v0.7.2:USB Driver for GSM modems > <6>[ 11.452144] PPP generic driver version 2.4.2 > <6>[ 11.456321] NET: Registered protocol family 24 > <6>[ 11.466852] PPP Deflate Compression module registered > <6>[ 11.470876] PPP BSD Compression module registered > <6>[ 11.519351] uvesafb: Intel Corporation, Intel(r)Poulsbo Graphics > Controller, Hardware Version 0.0, OEM: Intel(r)Poulsbo Graphics Chip > Accelerated VGA BIOS, VBE v3.0 > <6>[ 11.532228] uvesafb: VBIOS/hardware supports DDC2 transfers > <6>[ 11.544710] uvesafb: monitor limits: vf = 61 Hz, hf = 38 kHz, clk = 50 > MHz > <6>[ 11.544869] uvesafb: scrolling: redraw > <4>[ 11.544891] mtrr: type mismatch for 3f800000,400000 old: write-back > new: write-combining > <4>[ 11.544900] mtrr: type mismatch for 3f800000,200000 old: write-back > new: write-combining > <4>[ 11.544907] mtrr: type mismatch for 3f800000,100000 old: write-back > new: write-combining > <4>[ 11.544915] mtrr: type mismatch for 3f800000,80000 old: write-back > new: write-combining > <4>[ 11.544923] mtrr: type mismatch for 3f800000,40000 old: write-back > new: write-combining > <4>[ 11.544930] mtrr: type mismatch for 3f800000,20000 old: write-back > new: write-combining > <4>[ 11.544938] mtrr: type mismatch for 3f800000,10000 old: write-back > new: write-combining > <4>[ 11.544945] mtrr: type mismatch for 3f800000,8000 old: write-back new: > write-combining > <4>[ 11.544953] mtrr: type mismatch for 3f800000,4000 old: write-back new: > write-combining > <4>[ 11.544960] mtrr: type mismatch for 3f800000,2000 old: write-back new: > write-combining > <4>[ 11.544968] mtrr: type mismatch for 3f800000,1000 old: write-back new: > write-combining > <7>[ 12.040230] usb usb3: suspend_rh (auto-stop) > <6>[ 12.127682] Console: switching to colour frame buffer device 100x37 > <6>[ 12.137254] uvesafb: framebuffer at 0x3f800000, mapped to 0xf8d80000, > using 3750k, total 8000k > <6>[ 12.137262] fb0: VESA VGA frame buffer device > <7>[ 12.261636] power_supply ADP1: uevent > <7>[ 12.261644] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 > <7>[ 12.262949] power_supply ADP1: prop ONLINE=1 > <7>[ 12.263136] power_supply BAT0: uevent > <7>[ 12.263142] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > <7>[ 12.295885] power_supply BAT0: prop STATUS=Unknown > <7>[ 12.295898] power_supply BAT0: prop PRESENT=1 > <7>[ 12.295906] power_supply BAT0: prop TECHNOLOGY=Li-ion > <7>[ 12.295914] power_supply BAT0: prop CYCLE_COUNT=0 > <7>[ 12.295921] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=7400000 > <7>[ 12.295929] power_supply BAT0: prop VOLTAGE_NOW=8320000 > <7>[ 12.295937] power_supply BAT0: prop CURRENT_NOW=65535000 > <7>[ 12.295944] power_supply BAT0: prop CHARGE_FULL_DESIGN=2700000 > <7>[ 12.295952] power_supply BAT0: prop CHARGE_FULL=2919000 > <7>[ 12.295959] power_supply BAT0: prop CHARGE_NOW=2871000 > <7>[ 12.295967] power_supply BAT0: prop MODEL_NAME=Menlow > <7>[ 12.295974] power_supply BAT0: prop MANUFACTURER=LC Computer > <7>[ 12.295982] power_supply BAT0: prop SERIAL_NUMBER=53001 > <3>[ 12.314460] init: cannot open '/initlogo.rle' > <7>[ 12.699124] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 12.699144] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 12.699160] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <4>[ 12.782850] init (1): /proc/1/oom_adj is deprecated, please use > /proc/1/oom_score_adj instead. > <7>[ 12.850078] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 12.850112] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 12.850151] usb usb3: wakeup_rh (auto-start) > <7>[ 12.910060] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 12.910107] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 12.910120] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 12.910132] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 13.070065] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <7>[ 13.100930] uhci_hcd 0000:00:1d.0: reserve dev 4 ep81-INT, period 8, > phase 4, 93 us > <7>[ 13.141594] uhci_hcd 0000:00:1d.0: release dev 4 ep81-INT, period 8, > phase 4, 93 us > <6>[ 13.147490] warning: `rild' uses 32-bit capabilities (legacy support > in use) > <6>[ 13.190056] usb 3-1: new low speed USB device number 4 using uhci_hcd > <7>[ 13.348605] usb 3-1: skipped 1 descriptor after interface > <7>[ 13.353599] usb 3-1: default language 0x0409 > <7>[ 13.372602] usb 3-1: udev 4, busnum 3, minor = 259 > <6>[ 13.372611] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 13.372618] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 13.372625] usb 3-1: Product: Tablet > <6>[ 13.372630] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 13.372636] usb 3-1: SerialNumber: V1.0 > <7>[ 13.372995] usb 3-1: usb_probe_device > <7>[ 13.373008] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 13.375622] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 13.375758] hanwang 3-1:1.0: usb_probe_interface > <7>[ 13.375768] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 13.375801] usbhid 3-1:1.0: usb_probe_interface > <7>[ 13.375809] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 13.381729] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <6>[ 14.250291] input: Android Power Button as > /devices/virtual/input/input12 > <7>[ 15.290077] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 15.290094] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 15.290112] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 15.290120] usb 3-1: USB disconnect, device number 4 > <7>[ 15.290125] usb 3-1: unregistering device > <7>[ 15.290131] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 15.290252] usb 3-1: usb_disable_device nuking all URBs > <7>[ 15.450059] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 16.540076] usb usb3: suspend_rh (auto-stop) > <7>[ 17.129214] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 17.129243] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 17.129267] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 17.280084] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 17.280134] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 17.280169] usb usb3: wakeup_rh (auto-start) > <7>[ 17.340094] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 17.340145] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 17.340161] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 17.340176] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 17.500073] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 17.620095] usb 3-1: new low speed USB device number 5 using uhci_hcd > <7>[ 17.778605] usb 3-1: skipped 1 descriptor after interface > <7>[ 17.783618] usb 3-1: default language 0x0409 > <7>[ 17.802598] usb 3-1: udev 5, busnum 3, minor = 260 > <6>[ 17.802607] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 17.802614] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 17.802621] usb 3-1: Product: Tablet > <6>[ 17.802626] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 17.802631] usb 3-1: SerialNumber: V1.0 > <7>[ 17.802976] usb 3-1: usb_probe_device > <7>[ 17.802988] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 17.805621] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 17.805751] hanwang 3-1:1.0: usb_probe_interface > <7>[ 17.805761] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 17.805794] usbhid 3-1:1.0: usb_probe_interface > <7>[ 17.805802] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 17.811806] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 18.430089] uhci_hcd 0000:00:1d.0: reserve dev 4 ep81-INT, period 8, > phase 4, 93 us > <7>[ 18.481597] uhci_hcd 0000:00:1d.0: release dev 4 ep81-INT, period 8, > phase 4, 93 us > <7>[ 19.790083] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 19.790103] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 19.790125] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 19.790135] usb 3-1: USB disconnect, device number 5 > <7>[ 19.790142] usb 3-1: unregistering device > <7>[ 19.790150] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 19.790297] usb 3-1: usb_disable_device nuking all URBs > <7>[ 19.950120] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 21.040059] usb usb3: suspend_rh (auto-stop) > <7>[ 21.559195] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 21.559223] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 21.559244] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 21.710070] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 21.710103] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 21.710135] usb usb3: wakeup_rh (auto-start) > <7>[ 21.770062] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 21.770106] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 21.770120] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 21.770131] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 21.930056] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 22.050225] usb 3-1: new low speed USB device number 6 using uhci_hcd > <7>[ 22.212607] usb 3-1: skipped 1 descriptor after interface > <7>[ 22.217629] usb 3-1: default language 0x0409 > <7>[ 22.236659] usb 3-1: udev 6, busnum 3, minor = 261 > <6>[ 22.236669] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 22.236677] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 22.236686] usb 3-1: Product: Tablet > <6>[ 22.236692] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 22.236698] usb 3-1: SerialNumber: V1.0 > <7>[ 22.237256] usb 3-1: usb_probe_device > <7>[ 22.237269] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 22.239643] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 22.239800] hanwang 3-1:1.0: usb_probe_interface > <7>[ 22.239810] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 22.239843] usbhid 3-1:1.0: usb_probe_interface > <7>[ 22.239851] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 22.245822] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 24.040133] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 24.040155] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 24.040178] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 24.040188] usb 3-1: USB disconnect, device number 6 > <7>[ 24.040195] usb 3-1: unregistering device > <7>[ 24.040202] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 24.040345] usb 3-1: usb_disable_device nuking all URBs > <7>[ 24.210093] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 25.290070] usb usb3: suspend_rh (auto-stop) > <6>[ 25.423101] request_suspend_state: wakeup (3->0) at 25423087269 > (2013-02-04 10:19:49.698278249 UTC) > <3>[ 25.520138] init: no such service 'hciattach' > <7>[ 25.522828] uhci_hcd 0000:00:1d.0: reserve dev 4 ep81-INT, period 8, > phase 4, 93 us > <7>[ 25.989185] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 25.989211] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 25.989235] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <6>[ 26.020806] ath9k 0000:01:00.0: PCI INT A disabled > <6>[ 26.020873] ath9k: Driver unloaded > <7>[ 26.150130] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 26.150161] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 26.150195] usb usb3: wakeup_rh (auto-start) > <7>[ 26.210071] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 26.210124] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 26.210142] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 26.210158] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 26.370105] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 26.490078] usb 3-1: new low speed USB device number 7 using uhci_hcd > <7>[ 26.648657] usb 3-1: skipped 1 descriptor after interface > <7>[ 26.653637] usb 3-1: default language 0x0409 > <7>[ 26.679614] usb 3-1: udev 7, busnum 3, minor = 262 > <6>[ 26.679623] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 26.679630] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 26.679637] usb 3-1: Product: Tablet > <6>[ 26.679642] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 26.679648] usb 3-1: SerialNumber: V1.0 > <7>[ 26.679997] usb 3-1: usb_probe_device > <7>[ 26.680036] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 26.682678] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 26.682844] hanwang 3-1:1.0: usb_probe_interface > <7>[ 26.682855] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 26.682887] usbhid 3-1:1.0: usb_probe_interface > <7>[ 26.682895] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 26.688876] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <3>[ 26.920988] init: no such service 'hciattach' > <3>[ 28.323981] init: no such service 'hciattach' > <7>[ 28.540205] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 28.540267] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 28.540303] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 28.540318] usb 3-1: USB disconnect, device number 7 > <7>[ 28.540326] usb 3-1: unregistering device > <7>[ 28.540335] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 28.540604] usb 3-1: usb_disable_device nuking all URBs > <7>[ 28.702305] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <3>[ 29.725195] init: no such service 'hciattach' > <7>[ 29.790067] usb usb3: suspend_rh (auto-stop) > <7>[ 30.430113] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 30.430149] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 30.430172] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 30.590099] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 30.590149] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 30.590179] usb usb3: wakeup_rh (auto-start) > <7>[ 30.650096] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 30.650165] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 30.650182] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 30.650206] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 30.810075] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 30.930097] usb 3-1: new low speed USB device number 8 using uhci_hcd > <7>[ 31.098651] usb 3-1: skipped 1 descriptor after interface > <7>[ 31.103656] usb 3-1: default language 0x0409 > <7>[ 31.122655] usb 3-1: udev 8, busnum 3, minor = 263 > <6>[ 31.122667] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 31.122677] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 31.122686] usb 3-1: Product: Tablet > <6>[ 31.122693] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 31.122701] usb 3-1: SerialNumber: V1.0 > <7>[ 31.123128] usb 3-1: usb_probe_device > <7>[ 31.123144] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 31.125675] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 31.125847] hanwang 3-1:1.0: usb_probe_interface > <7>[ 31.125857] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 31.125890] usbhid 3-1:1.0: usb_probe_interface > <7>[ 31.125898] usbhid 3-1:1.0: usb_probe_interface - got id > <3>[ 31.130569] init: no such service 'hciattach' > <7>[ 31.131830] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <3>[ 32.531267] init: no such service 'hciattach' > <4>[ 32.990393] hda-intel: Invalid position buffer, using LPIB read method > instead. > <7>[ 33.040167] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 33.040187] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 33.040211] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 33.040221] usb 3-1: USB disconnect, device number 8 > <7>[ 33.040228] usb 3-1: unregistering device > <7>[ 33.040236] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 33.040387] usb 3-1: usb_disable_device nuking all URBs > <4>[ 33.082917] hda-intel: IRQ timing workaround is activated for card #0. > Suggest a bigger bdl_pos_adj. > <7>[ 33.200083] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <3>[ 33.931951] init: no such service 'hciattach' > <7>[ 34.290079] usb usb3: suspend_rh (auto-stop) > <7>[ 34.869192] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 34.869217] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 34.869241] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 35.020077] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 35.020106] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 35.020141] usb usb3: wakeup_rh (auto-start) > <7>[ 35.081206] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 35.081285] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 35.081307] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 35.081327] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 35.240108] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <3>[ 35.332662] init: no such service 'hciattach' > <6>[ 35.360095] usb 3-1: new low speed USB device number 9 using uhci_hcd > <7>[ 35.518642] usb 3-1: skipped 1 descriptor after interface > <7>[ 35.523639] usb 3-1: default language 0x0409 > <7>[ 35.541627] usb 3-1: udev 9, busnum 3, minor = 264 > <6>[ 35.541638] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 35.541647] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 35.541655] usb 3-1: Product: Tablet > <6>[ 35.541662] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 35.541669] usb 3-1: SerialNumber: V1.0 > <7>[ 35.542058] usb 3-1: usb_probe_device > <7>[ 35.542071] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 35.545110] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 35.545272] hanwang 3-1:1.0: usb_probe_interface > <7>[ 35.545282] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 35.545311] usbhid 3-1:1.0: usb_probe_interface > <7>[ 35.545319] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 35.550802] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <3>[ 36.733633] init: no such service 'hciattach' > <7>[ 37.290848] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 37.290871] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 37.290893] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 37.290903] usb 3-1: USB disconnect, device number 9 > <7>[ 37.290909] usb 3-1: unregistering device > <7>[ 37.290917] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 37.291086] usb 3-1: usb_disable_device nuking all URBs > <7>[ 37.450086] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <3>[ 38.137650] init: no such service 'hciattach' > <7>[ 38.540170] usb usb3: suspend_rh (auto-stop) > <7>[ 39.299185] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 39.299212] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 39.299235] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 39.450084] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 39.450116] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 39.450150] usb usb3: wakeup_rh (auto-start) > <7>[ 39.510124] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 39.510183] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 39.510202] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 39.510218] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <3>[ 39.538470] init: no such service 'hciattach' > <3>[ 39.538681] init: no such service 'hciattach' > <7>[ 39.670098] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 39.790127] usb 3-1: new low speed USB device number 10 using uhci_hcd > <7>[ 39.950176] usb 3-1: skipped 1 descriptor after interface > <7>[ 39.960280] usb 3-1: default language 0x0409 > <7>[ 39.978673] usb 3-1: udev 10, busnum 3, minor = 265 > <6>[ 39.978684] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 39.978692] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 39.978700] usb 3-1: Product: Tablet > <6>[ 39.978707] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 39.978714] usb 3-1: SerialNumber: V1.0 > <7>[ 39.979292] usb 3-1: usb_probe_device > <7>[ 39.979306] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 39.980854] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 39.981030] hanwang 3-1:1.0: usb_probe_interface > <7>[ 39.981040] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 39.981082] usbhid 3-1:1.0: usb_probe_interface > <7>[ 39.981646] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 39.987836] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 41.790114] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 41.790134] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 41.790156] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 41.790166] usb 3-1: USB disconnect, device number 10 > <7>[ 41.790172] usb 3-1: unregistering device > <7>[ 41.790180] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 41.790349] usb 3-1: usb_disable_device nuking all URBs > <7>[ 41.950406] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 43.040076] usb usb3: suspend_rh (auto-stop) > <7>[ 43.730115] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 43.730143] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 43.730166] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 43.890084] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 43.890116] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 43.890151] usb usb3: wakeup_rh (auto-start) > <7>[ 43.950085] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 43.950142] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 43.950160] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 43.950177] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 44.110115] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 44.230123] usb 3-1: new low speed USB device number 11 using uhci_hcd > <7>[ 44.388619] usb 3-1: skipped 1 descriptor after interface > <7>[ 44.393601] usb 3-1: default language 0x0409 > <7>[ 44.412608] usb 3-1: udev 11, busnum 3, minor = 266 > <6>[ 44.412615] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 44.412622] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 44.412628] usb 3-1: Product: Tablet > <6>[ 44.412633] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 44.412639] usb 3-1: SerialNumber: V1.0 > <7>[ 44.412975] usb 3-1: usb_probe_device > <7>[ 44.412987] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 44.415668] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 44.415811] hanwang 3-1:1.0: usb_probe_interface > <7>[ 44.415820] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 44.415854] usbhid 3-1:1.0: usb_probe_interface > <7>[ 44.415862] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 44.421830] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <6>[ 45.613122] ath9k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > <7>[ 45.613148] ath9k 0000:01:00.0: setting latency timer to 64 > <7>[ 45.673562] ath: EEPROM regdomain: 0x60 > <7>[ 45.673574] ath: EEPROM indicates we should expect a direct regpair > map > <7>[ 45.673587] ath: Country alpha2 being used: 00 > <7>[ 45.673592] ath: Regpair used: 0x60 > <7>[ 45.678445] ieee80211 phy1: Selected rate control algorithm > 'ath9k_rate_control' > <7>[ 45.687436] Registered led device: ath9k-phy1 > <6>[ 45.687480] ieee80211 phy1: Atheros AR9285 Rev:2 mem=0xf8a00000, > irq=16 > <6>[ 45.812571] ADDRCONF(NETDEV_UP): wlan0: link is not ready > <7>[ 46.290102] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 46.290122] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 46.290144] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 46.290155] usb 3-1: USB disconnect, device number 11 > <7>[ 46.290162] usb 3-1: unregistering device > <7>[ 46.290169] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 46.290314] usb 3-1: usb_disable_device nuking all URBs > <7>[ 46.450051] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 47.540041] usb usb3: suspend_rh (auto-stop) > <7>[ 48.169156] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 48.169177] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 48.169194] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 48.320026] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 48.320047] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 48.320073] usb usb3: wakeup_rh (auto-start) > <7>[ 48.380032] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 48.380068] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 48.380079] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 48.380090] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 48.540049] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 48.660099] usb 3-1: new low speed USB device number 12 using uhci_hcd > <7>[ 48.818700] usb 3-1: skipped 1 descriptor after interface > <7>[ 48.822631] usb 3-1: default language 0x0409 > <7>[ 48.841657] usb 3-1: udev 12, busnum 3, minor = 267 > <6>[ 48.841669] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 48.841677] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 48.841685] usb 3-1: Product: Tablet > <6>[ 48.841691] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 48.841698] usb 3-1: SerialNumber: V1.0 > <7>[ 48.842256] usb 3-1: usb_probe_device > <7>[ 48.842269] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 48.844822] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 48.844998] hanwang 3-1:1.0: usb_probe_interface > <7>[ 48.845007] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 48.845041] usbhid 3-1:1.0: usb_probe_interface > <7>[ 48.845047] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 48.853816] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 50.790070] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 50.790089] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 50.790107] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 50.790115] usb 3-1: USB disconnect, device number 12 > <7>[ 50.790120] usb 3-1: unregistering device > <7>[ 50.790126] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 50.790248] usb 3-1: usb_disable_device nuking all URBs > <7>[ 50.950035] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 50.993402] wlan0: authenticate with 00:3a:99:05:c9:21 (try 1) > <7>[ 51.190033] wlan0: authenticate with 00:3a:99:05:c9:21 (try 2) > <7>[ 51.198326] wlan0: authenticated > <7>[ 51.227116] wlan0: associate with 00:3a:99:05:c9:21 (try 1) > <7>[ 51.284511] wlan0: RX AssocResp from 00:3a:99:05:c9:21 (capab=0x401 > status=0 aid=58) > <7>[ 51.284522] wlan0: associated > <6>[ 51.285339] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > <7>[ 52.040047] usb usb3: suspend_rh (auto-stop) > <7>[ 52.599176] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 52.599197] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 52.599215] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 52.750027] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 52.750048] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 52.750072] usb usb3: wakeup_rh (auto-start) > <7>[ 52.810029] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 52.810068] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 52.810080] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 52.810091] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 52.972076] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 53.090118] usb 3-1: new low speed USB device number 13 using uhci_hcd > <7>[ 53.248648] usb 3-1: skipped 1 descriptor after interface > <7>[ 53.253643] usb 3-1: default language 0x0409 > <7>[ 53.272672] usb 3-1: udev 13, busnum 3, minor = 268 > <6>[ 53.272683] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 53.272693] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 53.272701] usb 3-1: Product: Tablet > <6>[ 53.272708] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 53.272716] usb 3-1: SerialNumber: V1.0 > <7>[ 53.273116] usb 3-1: usb_probe_device > <7>[ 53.273131] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 53.275692] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 53.275869] hanwang 3-1:1.0: usb_probe_interface > <7>[ 53.275880] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 53.275914] usbhid 3-1:1.0: usb_probe_interface > <7>[ 53.275923] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 53.281838] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 55.040078] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 55.040094] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 55.040113] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 55.040120] usb 3-1: USB disconnect, device number 13 > <7>[ 55.040126] usb 3-1: unregistering device > <7>[ 55.040131] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 55.040249] usb 3-1: usb_disable_device nuking all URBs > <7>[ 55.200038] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 56.290064] usb usb3: suspend_rh (auto-stop) > <7>[ 57.029195] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 57.029222] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 57.029244] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 57.180090] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 57.180124] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 57.180156] usb usb3: wakeup_rh (auto-start) > <7>[ 57.240234] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 57.240284] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 57.240301] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 57.240316] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 57.400109] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 57.520048] usb 3-1: new low speed USB device number 14 using uhci_hcd > <7>[ 57.678629] usb 3-1: skipped 1 descriptor after interface > <7>[ 57.683614] usb 3-1: default language 0x0409 > <7>[ 57.702618] usb 3-1: udev 14, busnum 3, minor = 269 > <6>[ 57.702625] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 57.702632] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 57.702639] usb 3-1: Product: Tablet > <6>[ 57.702644] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 57.702649] usb 3-1: SerialNumber: V1.0 > <7>[ 57.703000] usb 3-1: usb_probe_device > <7>[ 57.703013] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 57.705668] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 57.705812] hanwang 3-1:1.0: usb_probe_interface > <7>[ 57.705822] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 57.705857] usbhid 3-1:1.0: usb_probe_interface > <7>[ 57.705865] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 57.711761] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 57.711786] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 59.540060] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 59.540077] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 59.540095] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 59.540103] usb 3-1: USB disconnect, device number 14 > <7>[ 59.540108] usb 3-1: unregistering device > <7>[ 59.540114] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 59.540232] usb 3-1: usb_disable_device nuking all URBs > <7>[ 59.700078] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 60.790148] usb usb3: suspend_rh (auto-stop) > <7>[ 61.460800] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 61.460837] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 61.460861] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 61.620083] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 61.620113] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 61.620144] usb usb3: wakeup_rh (auto-start) > <7>[ 61.680100] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 61.680150] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 61.680166] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 61.680181] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 61.790034] wlan0: no IPv6 routers present > <7>[ 61.840085] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 61.960087] usb 3-1: new low speed USB device number 15 using uhci_hcd > <7>[ 62.118632] usb 3-1: skipped 1 descriptor after interface > <7>[ 62.123630] usb 3-1: default language 0x0409 > <7>[ 62.142635] usb 3-1: udev 15, busnum 3, minor = 270 > <6>[ 62.142646] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 62.142655] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 62.142664] usb 3-1: Product: Tablet > <6>[ 62.142671] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 62.142678] usb 3-1: SerialNumber: V1.0 > <7>[ 62.143098] usb 3-1: usb_probe_device > <7>[ 62.143110] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 62.145671] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 62.145840] hanwang 3-1:1.0: usb_probe_interface > <7>[ 62.145849] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 62.145886] usbhid 3-1:1.0: usb_probe_interface > <7>[ 62.145893] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 62.151891] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 64.040542] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 64.040563] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 64.040585] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 64.040595] usb 3-1: USB disconnect, device number 15 > <7>[ 64.040601] usb 3-1: unregistering device > <7>[ 64.040609] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 64.040779] usb 3-1: usb_disable_device nuking all URBs > <7>[ 64.200055] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 65.290084] usb usb3: suspend_rh (auto-stop) > <7>[ 65.902138] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 65.902161] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 65.902179] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 66.060034] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 66.060059] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 66.060086] usb usb3: wakeup_rh (auto-start) > <7>[ 66.120028] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 66.120064] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 66.120076] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 66.120087] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 66.280115] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 66.400124] usb 3-1: new low speed USB device number 16 using uhci_hcd > <7>[ 66.558640] usb 3-1: skipped 1 descriptor after interface > <7>[ 66.563617] usb 3-1: default language 0x0409 > <7>[ 66.582625] usb 3-1: udev 16, busnum 3, minor = 271 > <6>[ 66.582633] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 66.582640] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 66.582647] usb 3-1: Product: Tablet > <6>[ 66.582652] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 66.582657] usb 3-1: SerialNumber: V1.0 > <7>[ 66.582993] usb 3-1: usb_probe_device > <7>[ 66.583004] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 66.585656] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 66.585780] hanwang 3-1:1.0: usb_probe_interface > <7>[ 66.585790] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 66.585823] usbhid 3-1:1.0: usb_probe_interface > <7>[ 66.585832] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 66.591755] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 68.540063] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 68.540080] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 68.540098] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 68.540106] usb 3-1: USB disconnect, device number 16 > <7>[ 68.540111] usb 3-1: unregistering device > <7>[ 68.540117] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 68.540233] usb 3-1: usb_disable_device nuking all URBs > <7>[ 68.700031] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 69.790038] usb usb3: suspend_rh (auto-stop) > <7>[ 70.339196] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 70.339216] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 70.339233] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 70.490030] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 70.490054] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 70.490081] usb usb3: wakeup_rh (auto-start) > <7>[ 70.550028] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 70.550064] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 70.550075] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 70.550086] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 70.710029] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 70.830033] usb 3-1: new low speed USB device number 17 using uhci_hcd > <7>[ 70.988628] usb 3-1: skipped 1 descriptor after interface > <7>[ 70.993623] usb 3-1: default language 0x0409 > <7>[ 71.012626] usb 3-1: udev 17, busnum 3, minor = 272 > <6>[ 71.012633] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 71.012639] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 71.012645] usb 3-1: Product: Tablet > <6>[ 71.012651] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 71.012656] usb 3-1: SerialNumber: V1.0 > <7>[ 71.013001] usb 3-1: usb_probe_device > <7>[ 71.013013] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 71.015659] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 71.015815] hanwang 3-1:1.0: usb_probe_interface > <7>[ 71.015824] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 71.015858] usbhid 3-1:1.0: usb_probe_interface > <7>[ 71.015866] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 71.021799] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 72.790064] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 72.790082] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 72.790099] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 72.790107] usb 3-1: USB disconnect, device number 17 > <7>[ 72.790112] usb 3-1: unregistering device > <7>[ 72.790118] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 72.790237] usb 3-1: usb_disable_device nuking all URBs > <7>[ 72.950035] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 74.040041] usb usb3: suspend_rh (auto-stop) > <7>[ 74.769116] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 74.769137] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 74.769153] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 74.920027] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 74.920047] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 74.920071] usb usb3: wakeup_rh (auto-start) > <7>[ 74.980026] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 74.980061] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 74.980072] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 74.980084] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 75.140026] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 75.260024] usb 3-1: new low speed USB device number 18 using uhci_hcd > <7>[ 75.418635] usb 3-1: skipped 1 descriptor after interface > <7>[ 75.423627] usb 3-1: default language 0x0409 > <7>[ 75.442628] usb 3-1: udev 18, busnum 3, minor = 273 > <6>[ 75.442635] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 75.442642] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 75.442648] usb 3-1: Product: Tablet > <6>[ 75.442653] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 75.442659] usb 3-1: SerialNumber: V1.0 > <7>[ 75.442998] usb 3-1: usb_probe_device > <7>[ 75.443010] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 75.445690] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 75.445834] hanwang 3-1:1.0: usb_probe_interface > <7>[ 75.445844] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 75.445878] usbhid 3-1:1.0: usb_probe_interface > <7>[ 75.445886] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 75.451815] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 75.451845] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 77.290061] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 77.290079] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 77.290097] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 77.290105] usb 3-1: USB disconnect, device number 18 > <7>[ 77.290110] usb 3-1: unregistering device > <7>[ 77.290116] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 77.290233] usb 3-1: usb_disable_device nuking all URBs > <7>[ 77.450031] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 78.540041] usb usb3: suspend_rh (auto-stop) > <7>[ 79.199142] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 79.199165] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 79.199182] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 79.350066] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 79.350098] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 79.350128] usb usb3: wakeup_rh (auto-start) > <7>[ 79.410084] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 79.410137] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 79.410153] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 79.410168] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 79.570105] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 79.690139] usb 3-1: new low speed USB device number 19 using uhci_hcd > <7>[ 79.848650] usb 3-1: skipped 1 descriptor after interface > <7>[ 79.853627] usb 3-1: default language 0x0409 > <7>[ 79.872629] usb 3-1: udev 19, busnum 3, minor = 274 > <6>[ 79.872636] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 79.872642] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 79.872649] usb 3-1: Product: Tablet > <6>[ 79.872654] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 79.872659] usb 3-1: SerialNumber: V1.0 > <7>[ 79.872992] usb 3-1: usb_probe_device > <7>[ 79.873004] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 79.875669] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 79.875794] hanwang 3-1:1.0: usb_probe_interface > <7>[ 79.875804] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 79.875836] usbhid 3-1:1.0: usb_probe_interface > <7>[ 79.875844] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 79.881765] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 81.790063] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 81.790080] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 81.790098] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 81.790106] usb 3-1: USB disconnect, device number 19 > <7>[ 81.790111] usb 3-1: unregistering device > <7>[ 81.790117] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 81.790234] usb 3-1: usb_disable_device nuking all URBs > <7>[ 81.950050] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 83.040103] usb usb3: suspend_rh (auto-stop) > <7>[ 83.629209] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 83.629235] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 83.629257] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 83.780072] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 83.780106] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 83.780146] usb usb3: wakeup_rh (auto-start) > <7>[ 83.840098] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 83.840150] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 83.840166] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 83.840181] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 84.002678] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 84.120113] usb 3-1: new low speed USB device number 20 using uhci_hcd > <7>[ 84.278643] usb 3-1: skipped 1 descriptor after interface > <7>[ 84.283630] usb 3-1: default language 0x0409 > <7>[ 84.302633] usb 3-1: udev 20, busnum 3, minor = 275 > <6>[ 84.302641] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 84.302648] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 84.302654] usb 3-1: Product: Tablet > <6>[ 84.302659] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 84.302665] usb 3-1: SerialNumber: V1.0 > <7>[ 84.303004] usb 3-1: usb_probe_device > <7>[ 84.303016] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 84.305670] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 84.305795] hanwang 3-1:1.0: usb_probe_interface > <7>[ 84.305804] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 84.305837] usbhid 3-1:1.0: usb_probe_interface > <7>[ 84.305846] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 84.311768] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 86.290061] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 86.290079] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 86.290098] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 86.290105] usb 3-1: USB disconnect, device number 20 > <7>[ 86.290111] usb 3-1: unregistering device > <7>[ 86.290116] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 86.290239] usb 3-1: usb_disable_device nuking all URBs > <7>[ 86.450034] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 87.540030] usb usb3: suspend_rh (auto-stop) > <7>[ 88.059156] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 88.059177] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 88.059194] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 88.210026] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 88.210046] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 88.210072] usb usb3: wakeup_rh (auto-start) > <7>[ 88.270029] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 88.270064] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 88.270075] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 88.270086] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 88.430052] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 88.550029] usb 3-1: new low speed USB device number 21 using uhci_hcd > <7>[ 88.708642] usb 3-1: skipped 1 descriptor after interface > <7>[ 88.713635] usb 3-1: default language 0x0409 > <7>[ 88.732637] usb 3-1: udev 21, busnum 3, minor = 276 > <6>[ 88.732644] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 88.732651] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 88.732657] usb 3-1: Product: Tablet > <6>[ 88.732662] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 88.732667] usb 3-1: SerialNumber: V1.0 > <7>[ 88.733004] usb 3-1: usb_probe_device > <7>[ 88.733016] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 88.735672] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 88.735797] hanwang 3-1:1.0: usb_probe_interface > <7>[ 88.735807] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 88.735841] usbhid 3-1:1.0: usb_probe_interface > <7>[ 88.735849] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 88.741771] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 90.540125] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 90.540147] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 90.540169] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 90.540180] usb 3-1: USB disconnect, device number 21 > <7>[ 90.540186] usb 3-1: unregistering device > <7>[ 90.540194] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 90.540369] usb 3-1: usb_disable_device nuking all URBs > <7>[ 90.700036] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 91.790082] usb usb3: suspend_rh (auto-stop) > <7>[ 92.489133] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 92.489154] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 92.489171] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 92.640026] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 92.640045] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 92.640071] usb usb3: wakeup_rh (auto-start) > <7>[ 92.700030] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 92.700067] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 92.700078] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 92.700089] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 92.860037] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 92.980028] usb 3-1: new low speed USB device number 22 using uhci_hcd > <7>[ 93.138644] usb 3-1: skipped 1 descriptor after interface > <7>[ 93.143638] usb 3-1: default language 0x0409 > <7>[ 93.162640] usb 3-1: udev 22, busnum 3, minor = 277 > <6>[ 93.162647] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 93.162654] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 93.162660] usb 3-1: Product: Tablet > <6>[ 93.162665] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 93.162671] usb 3-1: SerialNumber: V1.0 > <7>[ 93.163008] usb 3-1: usb_probe_device > <7>[ 93.163020] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 93.165676] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 93.165801] hanwang 3-1:1.0: usb_probe_interface > <7>[ 93.165811] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 93.165844] usbhid 3-1:1.0: usb_probe_interface > <7>[ 93.165852] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 93.171823] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 95.040060] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 95.040077] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 95.040095] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 95.040103] usb 3-1: USB disconnect, device number 22 > <7>[ 95.040108] usb 3-1: unregistering device > <7>[ 95.040114] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 95.040234] usb 3-1: usb_disable_device nuking all URBs > <7>[ 95.200039] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 96.290085] usb usb3: suspend_rh (auto-stop) > <7>[ 96.919127] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 96.919148] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 96.919165] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 97.070103] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 97.070138] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 97.070187] usb usb3: wakeup_rh (auto-start) > <7>[ 97.130050] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 97.130106] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 97.130122] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 97.130133] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 97.290082] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 97.410074] usb 3-1: new low speed USB device number 23 using uhci_hcd > <7>[ 97.568692] usb 3-1: skipped 1 descriptor after interface > <7>[ 97.573647] usb 3-1: default language 0x0409 > <7>[ 97.592664] usb 3-1: udev 23, busnum 3, minor = 278 > <6>[ 97.592675] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 97.592684] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 97.592693] usb 3-1: Product: Tablet > <6>[ 97.592700] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 97.592708] usb 3-1: SerialNumber: V1.0 > <7>[ 97.593133] usb 3-1: usb_probe_device > <7>[ 97.593145] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 97.595742] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 97.595913] hanwang 3-1:1.0: usb_probe_interface > <7>[ 97.595923] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 97.595956] usbhid 3-1:1.0: usb_probe_interface > <7>[ 97.595963] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 97.601838] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 99.540198] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 99.540219] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 99.540240] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 99.540251] usb 3-1: USB disconnect, device number 23 > <7>[ 99.540257] usb 3-1: unregistering device > <7>[ 99.540265] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 99.540427] usb 3-1: usb_disable_device nuking all URBs > <7>[ 99.700100] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 100.790064] usb usb3: suspend_rh (auto-stop) > <7>[ 101.349177] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 101.349203] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 101.349224] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 101.500098] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 101.500135] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 101.500176] usb usb3: wakeup_rh (auto-start) > <7>[ 101.560115] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 101.560167] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 101.560183] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 101.560197] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 101.720085] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 101.840172] usb 3-1: new low speed USB device number 24 using uhci_hcd > <7>[ 101.998681] usb 3-1: skipped 1 descriptor after interface > <7>[ 102.003648] usb 3-1: default language 0x0409 > <7>[ 102.022663] usb 3-1: udev 24, busnum 3, minor = 279 > <6>[ 102.022673] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 102.022683] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 102.022691] usb 3-1: Product: Tablet > <6>[ 102.022698] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 102.022706] usb 3-1: SerialNumber: V1.0 > <7>[ 102.023083] usb 3-1: usb_probe_device > <7>[ 102.023095] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 102.025743] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 102.025914] hanwang 3-1:1.0: usb_probe_interface > <7>[ 102.025923] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 102.025955] usbhid 3-1:1.0: usb_probe_interface > <7>[ 102.025962] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 102.030844] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 103.790077] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 103.790094] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 103.790112] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 103.790120] usb 3-1: USB disconnect, device number 24 > <7>[ 103.790125] usb 3-1: unregistering device > <7>[ 103.790131] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 103.790249] usb 3-1: usb_disable_device nuking all URBs > <7>[ 103.950096] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 105.040104] usb usb3: suspend_rh (auto-stop) > <7>[ 105.779302] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 105.779345] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 105.779376] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 105.930093] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 105.930125] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 105.930167] usb usb3: wakeup_rh (auto-start) > <7>[ 105.990049] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 105.990093] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 105.990107] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 105.990118] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 106.150118] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 106.270056] usb 3-1: new low speed USB device number 25 using uhci_hcd > <7>[ 106.460114] usb 3-1: skipped 1 descriptor after interface > <7>[ 106.464691] usb 3-1: default language 0x0409 > <7>[ 106.483705] usb 3-1: udev 25, busnum 3, minor = 280 > <6>[ 106.483717] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 106.483726] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 106.483735] usb 3-1: Product: Tablet > <6>[ 106.483742] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 106.483749] usb 3-1: SerialNumber: V1.0 > <7>[ 106.484147] usb 3-1: usb_probe_device > <7>[ 106.484161] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 106.487295] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 106.487467] hanwang 3-1:1.0: usb_probe_interface > <7>[ 106.487476] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 106.487507] usbhid 3-1:1.0: usb_probe_interface > <7>[ 106.487514] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 106.492974] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 106.493000] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 108.290062] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 108.290079] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 108.290097] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 108.290105] usb 3-1: USB disconnect, device number 25 > <7>[ 108.290111] usb 3-1: unregistering device > <7>[ 108.290116] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 108.290241] usb 3-1: usb_disable_device nuking all URBs > <7>[ 108.450052] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 109.540055] usb usb3: suspend_rh (auto-stop) > <7>[ 110.220108] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 110.220139] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 110.220160] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 110.380128] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 110.380162] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 110.380191] usb usb3: wakeup_rh (auto-start) > <7>[ 110.440087] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 110.440140] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 110.440156] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 110.440170] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 110.603012] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 110.720099] usb 3-1: new low speed USB device number 26 using uhci_hcd > <7>[ 110.878672] usb 3-1: skipped 1 descriptor after interface > <7>[ 110.883653] usb 3-1: default language 0x0409 > <7>[ 110.902668] usb 3-1: udev 26, busnum 3, minor = 281 > <6>[ 110.902678] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 110.902688] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 110.902697] usb 3-1: Product: Tablet > <6>[ 110.902703] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 110.902711] usb 3-1: SerialNumber: V1.0 > <7>[ 110.903096] usb 3-1: usb_probe_device > <7>[ 110.903108] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 110.907720] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 110.907890] hanwang 3-1:1.0: usb_probe_interface > <7>[ 110.907900] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 110.907931] usbhid 3-1:1.0: usb_probe_interface > <7>[ 110.907939] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 110.913850] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 112.790088] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 112.790109] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 112.790132] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 112.790142] usb 3-1: USB disconnect, device number 26 > <7>[ 112.790149] usb 3-1: unregistering device > <7>[ 112.790157] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 112.790296] usb 3-1: usb_disable_device nuking all URBs > <7>[ 112.950083] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 114.040092] usb usb3: suspend_rh (auto-stop) > <7>[ 114.659659] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 114.659689] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 114.659789] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 114.810085] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 114.810118] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 114.810158] usb usb3: wakeup_rh (auto-start) > <7>[ 114.870079] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 114.870133] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 114.870148] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 114.870163] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 115.030086] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 115.150114] usb 3-1: new low speed USB device number 27 using uhci_hcd > <7>[ 115.308704] usb 3-1: skipped 1 descriptor after interface > <7>[ 115.313711] usb 3-1: default language 0x0409 > <7>[ 115.332666] usb 3-1: udev 27, busnum 3, minor = 282 > <6>[ 115.332674] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 115.332682] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 115.332688] usb 3-1: Product: Tablet > <6>[ 115.332693] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 115.332699] usb 3-1: SerialNumber: V1.0 > <7>[ 115.333033] usb 3-1: usb_probe_device > <7>[ 115.333045] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 115.335753] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 115.335921] hanwang 3-1:1.0: usb_probe_interface > <7>[ 115.335931] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 115.335965] usbhid 3-1:1.0: usb_probe_interface > <7>[ 115.335974] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 115.341895] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 117.290081] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 117.290103] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 117.290124] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 117.290135] usb 3-1: USB disconnect, device number 27 > <7>[ 117.290142] usb 3-1: unregistering device > <7>[ 117.290149] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 117.290320] usb 3-1: usb_disable_device nuking all URBs > <7>[ 117.450108] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 118.540066] usb usb3: suspend_rh (auto-stop) > <7>[ 119.089220] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 119.089249] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 119.089270] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 119.240082] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 119.240112] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 119.240144] usb usb3: wakeup_rh (auto-start) > <7>[ 119.300098] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 119.300151] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 119.300167] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 119.300182] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 119.460085] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 119.580091] usb 3-1: new low speed USB device number 28 using uhci_hcd > <7>[ 119.738707] usb 3-1: skipped 1 descriptor after interface > <7>[ 119.743679] usb 3-1: default language 0x0409 > <7>[ 119.762691] usb 3-1: udev 28, busnum 3, minor = 283 > <6>[ 119.762702] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 119.762711] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 119.762720] usb 3-1: Product: Tablet > <6>[ 119.762727] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 119.762735] usb 3-1: SerialNumber: V1.0 > <7>[ 119.763189] usb 3-1: usb_probe_device > <7>[ 119.763203] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 119.766233] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 119.766411] hanwang 3-1:1.0: usb_probe_interface > <7>[ 119.766422] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 119.766455] usbhid 3-1:1.0: usb_probe_interface > <7>[ 119.766464] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 119.777063] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 121.540262] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 121.540283] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 121.540304] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 121.540315] usb 3-1: USB disconnect, device number 28 > <7>[ 121.540322] usb 3-1: unregistering device > <7>[ 121.540330] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 121.540478] usb 3-1: usb_disable_device nuking all URBs > <7>[ 121.700095] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 122.790076] usb usb3: suspend_rh (auto-stop) > <7>[ 123.519277] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 123.519318] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 123.519346] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 123.670082] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 123.670114] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 123.670142] usb usb3: wakeup_rh (auto-start) > <7>[ 123.730071] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 123.730125] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 123.730142] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 123.730159] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 123.890071] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 124.010076] usb 3-1: new low speed USB device number 29 using uhci_hcd > <7>[ 124.168698] usb 3-1: skipped 1 descriptor after interface > <7>[ 124.173712] usb 3-1: default language 0x0409 > <7>[ 124.192716] usb 3-1: udev 29, busnum 3, minor = 284 > <6>[ 124.192727] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 124.192737] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 124.192745] usb 3-1: Product: Tablet > <6>[ 124.192752] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 124.192760] usb 3-1: SerialNumber: V1.0 > <7>[ 124.193167] usb 3-1: usb_probe_device > <7>[ 124.193180] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 124.195744] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 124.195911] hanwang 3-1:1.0: usb_probe_interface > <7>[ 124.195920] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 124.195952] usbhid 3-1:1.0: usb_probe_interface > <7>[ 124.195960] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 124.201899] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 124.201922] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 126.040236] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 126.040255] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 126.040276] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 126.040286] usb 3-1: USB disconnect, device number 29 > <7>[ 126.040293] usb 3-1: unregistering device > <7>[ 126.040301] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 126.040454] usb 3-1: usb_disable_device nuking all URBs > <7>[ 126.200046] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 127.290043] usb usb3: suspend_rh (auto-stop) > <7>[ 127.949144] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 127.949171] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 127.949195] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 128.100030] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 128.100053] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 128.100080] usb usb3: wakeup_rh (auto-start) > <7>[ 128.160029] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 128.160065] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 128.160076] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 128.160087] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 128.320163] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 128.440089] usb 3-1: new low speed USB device number 30 using uhci_hcd > <7>[ 128.598682] usb 3-1: skipped 1 descriptor after interface > <7>[ 128.603665] usb 3-1: default language 0x0409 > <7>[ 128.622707] usb 3-1: udev 30, busnum 3, minor = 285 > <6>[ 128.622718] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 128.622727] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 128.622736] usb 3-1: Product: Tablet > <6>[ 128.622742] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 128.622750] usb 3-1: SerialNumber: V1.0 > <7>[ 128.623142] usb 3-1: usb_probe_device > <7>[ 128.623155] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 128.625736] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 128.625897] hanwang 3-1:1.0: usb_probe_interface > <7>[ 128.625906] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 128.625937] usbhid 3-1:1.0: usb_probe_interface > <7>[ 128.625945] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 128.631152] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 130.540107] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 130.540128] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 130.540150] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 130.540160] usb 3-1: USB disconnect, device number 30 > <7>[ 130.540167] usb 3-1: unregistering device > <7>[ 130.540175] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 130.540346] usb 3-1: usb_disable_device nuking all URBs > <7>[ 130.700048] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 131.790083] usb usb3: suspend_rh (auto-stop) > <7>[ 132.379213] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 132.379241] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 132.379263] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 132.530093] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 132.530125] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 132.530171] usb usb3: wakeup_rh (auto-start) > <7>[ 132.590105] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 132.590158] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 132.590175] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 132.590190] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 132.750082] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 132.870075] usb 3-1: new low speed USB device number 31 using uhci_hcd > <7>[ 133.028857] usb 3-1: skipped 1 descriptor after interface > <7>[ 133.033711] usb 3-1: default language 0x0409 > <7>[ 133.051825] usb 3-1: udev 31, busnum 3, minor = 286 > <6>[ 133.051838] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 133.051848] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 133.051857] usb 3-1: Product: Tablet > <6>[ 133.051864] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 133.051871] usb 3-1: SerialNumber: V1.0 > <7>[ 133.052600] usb 3-1: usb_probe_device > <7>[ 133.052616] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 133.054818] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 133.055028] hanwang 3-1:1.0: usb_probe_interface > <7>[ 133.055039] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 133.055075] usbhid 3-1:1.0: usb_probe_interface > <7>[ 133.055083] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 133.061010] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 135.040066] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 135.040086] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 135.040109] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 135.040119] usb 3-1: USB disconnect, device number 31 > <7>[ 135.040126] usb 3-1: unregistering device > <7>[ 135.040134] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 135.040281] usb 3-1: usb_disable_device nuking all URBs > <7>[ 135.200072] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 136.290067] usb usb3: suspend_rh (auto-stop) > <7>[ 136.809246] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 136.809275] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 136.809297] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 136.960128] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 136.960161] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 136.960201] usb usb3: wakeup_rh (auto-start) > <7>[ 137.020144] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 137.020203] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 137.020220] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 137.020233] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 137.180061] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 137.300081] usb 3-1: new low speed USB device number 32 using uhci_hcd > <7>[ 137.458744] usb 3-1: skipped 1 descriptor after interface > <7>[ 137.463703] usb 3-1: default language 0x0409 > <7>[ 137.483633] usb 3-1: udev 32, busnum 3, minor = 287 > <6>[ 137.483645] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 137.483654] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 137.483663] usb 3-1: Product: Tablet > <6>[ 137.483670] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 137.483678] usb 3-1: SerialNumber: V1.0 > <7>[ 137.484056] usb 3-1: usb_probe_device > <7>[ 137.484069] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 137.486753] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 137.486922] hanwang 3-1:1.0: usb_probe_interface > <7>[ 137.486932] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 137.486963] usbhid 3-1:1.0: usb_probe_interface > <7>[ 137.486970] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 137.492883] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 139.290052] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 139.290069] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 139.290088] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 139.290096] usb 3-1: USB disconnect, device number 32 > <7>[ 139.290101] usb 3-1: unregistering device > <7>[ 139.290107] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 139.290227] usb 3-1: usb_disable_device nuking all URBs > <7>[ 139.450765] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 140.540033] usb usb3: suspend_rh (auto-stop) > <7>[ 141.239192] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 141.239213] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 141.239231] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 141.390049] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 141.390073] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 141.390101] usb usb3: wakeup_rh (auto-start) > <7>[ 141.450044] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 141.450090] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 141.450103] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 141.450114] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 141.610033] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 141.730033] usb 3-1: new low speed USB device number 33 using uhci_hcd > <7>[ 141.888680] usb 3-1: skipped 1 descriptor after interface > <7>[ 141.893709] usb 3-1: default language 0x0409 > <7>[ 141.912738] usb 3-1: udev 33, busnum 3, minor = 288 > <6>[ 141.912749] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 141.912759] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 141.912768] usb 3-1: Product: Tablet > <6>[ 141.912775] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 141.912782] usb 3-1: SerialNumber: V1.0 > <7>[ 141.913252] usb 3-1: usb_probe_device > <7>[ 141.913267] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 141.915741] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 141.915911] hanwang 3-1:1.0: usb_probe_interface > <7>[ 141.915921] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 141.915952] usbhid 3-1:1.0: usb_probe_interface > <7>[ 141.915959] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 141.921931] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 143.790066] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 143.790083] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 143.790101] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 143.790109] usb 3-1: USB disconnect, device number 33 > <7>[ 143.790114] usb 3-1: unregistering device > <7>[ 143.790120] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 143.790238] usb 3-1: usb_disable_device nuking all URBs > <7>[ 143.950034] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 145.040127] usb usb3: suspend_rh (auto-stop) > <7>[ 145.669138] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 145.669158] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 145.669176] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 145.820071] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 145.820095] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 145.820119] usb usb3: wakeup_rh (auto-start) > <7>[ 145.880126] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 145.880187] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 145.880203] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 145.880217] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 146.040056] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 146.160082] usb 3-1: new low speed USB device number 34 using uhci_hcd > <7>[ 146.318689] usb 3-1: skipped 1 descriptor after interface > <7>[ 146.323678] usb 3-1: default language 0x0409 > <7>[ 146.342681] usb 3-1: udev 34, busnum 3, minor = 289 > <6>[ 146.342689] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 146.342696] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 146.342702] usb 3-1: Product: Tablet > <6>[ 146.342707] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 146.342712] usb 3-1: SerialNumber: V1.0 > <7>[ 146.343059] usb 3-1: usb_probe_device > <7>[ 146.343072] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 146.345723] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 146.345856] hanwang 3-1:1.0: usb_probe_interface > <7>[ 146.345866] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 146.345898] usbhid 3-1:1.0: usb_probe_interface > <7>[ 146.345906] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 146.351864] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 148.290075] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 148.290092] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 148.290110] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 148.290118] usb 3-1: USB disconnect, device number 34 > <7>[ 148.290123] usb 3-1: unregistering device > <7>[ 148.290129] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 148.290252] usb 3-1: usb_disable_device nuking all URBs > <7>[ 148.450036] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 149.540044] usb usb3: suspend_rh (auto-stop) > <7>[ 150.099130] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 150.099150] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 150.099167] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 150.250038] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 150.250062] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 150.250088] usb usb3: wakeup_rh (auto-start) > <7>[ 150.310027] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 150.310063] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 150.310075] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 150.310086] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 150.470043] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 150.590030] usb 3-1: new low speed USB device number 35 using uhci_hcd > <7>[ 150.748687] usb 3-1: skipped 1 descriptor after interface > <7>[ 150.753680] usb 3-1: default language 0x0409 > <7>[ 150.772682] usb 3-1: udev 35, busnum 3, minor = 290 > <6>[ 150.772689] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 150.772696] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 150.772702] usb 3-1: Product: Tablet > <6>[ 150.772707] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 150.772713] usb 3-1: SerialNumber: V1.0 > <7>[ 150.773055] usb 3-1: usb_probe_device > <7>[ 150.773067] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 150.775720] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 150.775845] hanwang 3-1:1.0: usb_probe_interface > <7>[ 150.775855] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 150.775889] usbhid 3-1:1.0: usb_probe_interface > <7>[ 150.775897] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 150.781818] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > > > <7>[ 143.790101] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 143.790109] usb 3-1: USB disconnect, device number 33 > <7>[ 143.790114] usb 3-1: unregistering device > <7>[ 143.790120] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 143.790238] usb 3-1: usb_disable_device nuking all URBs > <7>[ 143.950034] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 145.040127] usb usb3: suspend_rh (auto-stop) > <7>[ 145.669138] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 145.669158] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 145.669176] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 145.820071] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 145.820095] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 145.820119] usb usb3: wakeup_rh (auto-start) > <7>[ 145.880126] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 145.880187] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 145.880203] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 145.880217] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 146.040056] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 146.160082] usb 3-1: new low speed USB device number 34 using uhci_hcd > <7>[ 146.318689] usb 3-1: skipped 1 descriptor after interface > <7>[ 146.323678] usb 3-1: default language 0x0409 > <7>[ 146.342681] usb 3-1: udev 34, busnum 3, minor = 289 > <6>[ 146.342689] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 146.342696] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 146.342702] usb 3-1: Product: Tablet > <6>[ 146.342707] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 146.342712] usb 3-1: SerialNumber: V1.0 > <7>[ 146.343059] usb 3-1: usb_probe_device > <7>[ 146.343072] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 146.345723] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 146.345856] hanwang 3-1:1.0: usb_probe_interface > <7>[ 146.345866] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 146.345898] usbhid 3-1:1.0: usb_probe_interface > <7>[ 146.345906] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 146.351864] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 148.290075] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 148.290092] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > <7>[ 148.290110] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > <6>[ 148.290118] usb 3-1: USB disconnect, device number 34 > <7>[ 148.290123] usb 3-1: unregistering device > <7>[ 148.290129] usb 3-1: unregistering interface 3-1:1.0 > <7>[ 148.290252] usb 3-1: usb_disable_device nuking all URBs > <7>[ 148.450036] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x100 > <7>[ 149.540044] usb usb3: suspend_rh (auto-stop) > <7>[ 150.099130] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > <7>[ 150.099150] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > ACK POWER sig=k CSC CONNECT > <7>[ 150.099167] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > <7>[ 150.250038] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > status 0x501 > <7>[ 150.250062] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > <7>[ 150.250088] usb usb3: wakeup_rh (auto-start) > <7>[ 150.310027] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > ACK POWER OWNER sig=se0 CSC > <7>[ 150.310063] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > <7>[ 150.310075] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > <7>[ 150.310086] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > <7>[ 150.470043] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > status 0x301 > <6>[ 150.590030] usb 3-1: new low speed USB device number 35 using uhci_hcd > <7>[ 150.748687] usb 3-1: skipped 1 descriptor after interface > <7>[ 150.753680] usb 3-1: default language 0x0409 > <7>[ 150.772682] usb 3-1: udev 35, busnum 3, minor = 290 > <6>[ 150.772689] usb 3-1: New USB device found, idVendor=0b57, > idProduct=8408 > <6>[ 150.772696] usb 3-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > <6>[ 150.772702] usb 3-1: Product: Tablet > <6>[ 150.772707] usb 3-1: Manufacturer: 汉王科技股份有限公司 > <6>[ 150.772713] usb 3-1: SerialNumber: V1.0 > <7>[ 150.773055] usb 3-1: usb_probe_device > <7>[ 150.773067] usb 3-1: configuration #1 chosen from 1 choice > <7>[ 150.775720] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > <7>[ 150.775845] hanwang 3-1:1.0: usb_probe_interface > <7>[ 150.775855] hanwang 3-1:1.0: usb_probe_interface - got id > <7>[ 150.775889] usbhid 3-1:1.0: usb_probe_interface > <7>[ 150.775897] usbhid 3-1:1.0: usb_probe_interface - got id > <7>[ 150.781818] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
