On Mon, Mar 11, 2013 at 02:50:57PM +0800, Joshua wrote: > Hi Sarah， > > Thank you for replying. No worries! Will you please hit 'reply all' next time, so we keep the mailing list on Cc? Thanks. :) > I had also tried kernel (3.8.1) or Ubuntu 12.04, and the result was the same. > But I found the reason in those days debugging. It seems that if the > device was not attached by usbhid driver, the device will keep > disconnect. > > So my solution was, firstly let it to be attached by usbhid during > booting, after that I will manually unbind usbhid and bind with my own > driver. That works! Huh. That's odd. Maybe your device needs some initialization that the usbhid driver does during its probe routine, but your own driver doesn't do. Out of curiosity, is your driver an in-kernel driver or an out-of-tree userspace driver? > Recently, I read the EHCI 1.1 addendum specification. I noticed there > are some implementations in kernel for that spec by intel engineers, > but i didn't find the "Hardware Prefetching" support . Did the kernel > support that feature? > I doubt there have such a EHCI that supports the EHCI 1.1. What would an EHCI addendum have to do with your particular bug? Or is this a different question? Alan Stern would probably be the best person to ask this question, since he's the EHCI maintainer. Sarah Sharp > On Wed, Mar 6, 2013 at 7:28 AM, Sarah Sharp > <sarah.a.sharp@xxxxxxxxxxxxxxx> wrote: > > Hi Joshua, > > > > 2.6.37 is a few years old by now, and isn't being updated with bug > > fixes. I recommend trying the latest stable kernel instead (3.8.1). > > > > Is there a particular reason you needed to stick with Ubuntu 10.04 > > instead of 12.04? > > > > Sarah Sharp > > > > On Mon, Mar 04, 2013 at 01:28:06PM +0800, Joshua wrote: > >> ---------- Forwarded message ---------- > >> From: Joshua <joshua520@xxxxxxxxx> > >> Date: Mon, Mar 4, 2013 at 1:24 PM > >> Subject: a usb regression in kernel 2.6.37 and upper > >> To: linux-usb@xxxxxxxxxxxxxxx > >> > >> > >> Hi Experts, > >> > >> I have a old tablet netbook named Touchpad B16 from Hanwang Company. I have > >> installed Ubuntu 10.04 with kernel 2.6.32. > >> The input usb device(pid:8408,vid 0b57) was working good. But when I upgrade > >> the kernel to 2.6.37. The device keeping disconnect and connect. > >> I had tried with 2.6.36, it also works. > >> > >> I had viewed a lot of kernel change log for 2.6.37. Unfortunately, I found > >> nothing related with this issue. Could you please give me some comments or > >> help? > >> > >> This is the dmesg info > >> > >> > >> <7>[ 0.530700] PCI: max bus depth: 1 pci_try_num: 2 > >> <6>[ 0.530737] pci 0000:00:1c.1: BAR 9: assigned [mem > >> 0x80000000-0x801fffff pref] > >> <6>[ 0.530747] pci 0000:00:1c.0: BAR 9: assigned [mem > >> 0x80200000-0x803fffff pref] > >> <6>[ 0.530757] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] > >> <6>[ 0.530764] pci 0000:00:1c.0: PCI bridge to [bus 01-01] > >> <6>[ 0.530772] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] > >> <6>[ 0.530782] pci 0000:00:1c.0: bridge window [mem > >> 0xcfc00000-0xcfcfffff] > >> <6>[ 0.530790] pci 0000:00:1c.0: bridge window [mem > >> 0x80200000-0x803fffff pref] > >> <6>[ 0.530801] pci 0000:00:1c.1: PCI bridge to [bus 02-02] > >> <6>[ 0.530808] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] > >> <6>[ 0.530817] pci 0000:00:1c.1: bridge window [mem > >> 0xcfd00000-0xcfdfffff] > >> <6>[ 0.530826] pci 0000:00:1c.1: bridge window [mem > >> 0x80000000-0x801fffff pref] > >> <6>[ 0.530846] pci 0000:00:1c.0: enabling device (0106 -> 0107) > >> <6>[ 0.530878] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ > >> 16 > >> <7>[ 0.530888] pci 0000:00:1c.0: setting latency timer to 64 > >> <6>[ 0.530908] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ > >> 17 > >> <7>[ 0.530917] pci 0000:00:1c.1: setting latency timer to 64 > >> <7>[ 0.530926] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > >> <7>[ 0.530932] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > >> <7>[ 0.530939] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > >> <7>[ 0.530945] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] > >> <7>[ 0.530952] pci_bus 0000:00: resource 8 [mem 0x3f800000-0xdfffffff] > >> <7>[ 0.530958] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff] > >> <7>[ 0.530965] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] > >> <7>[ 0.530971] pci_bus 0000:01: resource 1 [mem 0xcfc00000-0xcfcfffff] > >> <7>[ 0.530978] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff > >> pref] > >> <7>[ 0.530985] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] > >> <7>[ 0.530991] pci_bus 0000:02: resource 1 [mem 0xcfd00000-0xcfdfffff] > >> <7>[ 0.530997] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff > >> pref] > >> <6>[ 0.531132] NET: Registered protocol family 2 > >> <6>[ 0.531273] IP route cache hash table entries: 32768 (order: 5, 131072 > >> bytes) > >> <6>[ 0.531886] TCP established hash table entries: 131072 (order: 8, > >> 1048576 bytes) > >> <6>[ 0.533050] TCP bind hash table entries: 65536 (order: 7, 524288 > >> bytes) > >> <6>[ 0.533712] TCP: Hash tables configured (established 131072 bind > >> 65536) > >> <6>[ 0.533720] TCP reno registered > >> <6>[ 0.533730] UDP hash table entries: 512 (order: 2, 16384 bytes) > >> <6>[ 0.533757] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) > >> <6>[ 0.534046] NET: Registered protocol family 1 > >> <7>[ 0.534096] pci 0000:00:02.0: Boot video device > >> <6>[ 0.534166] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ > >> 20 > >> <7>[ 0.534177] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c1 > >> <7>[ 0.534182] pci 0000:00:1d.0: Performing full reset > >> <6>[ 0.534200] pci 0000:00:1d.0: PCI INT A disabled > >> <6>[ 0.534223] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ > >> 21 > >> <7>[ 0.534232] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c1 > >> <7>[ 0.534238] pci 0000:00:1d.1: Performing full reset > >> <6>[ 0.534254] pci 0000:00:1d.1: PCI INT B disabled > >> <6>[ 0.534276] pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ > >> 22 > >> <7>[ 0.534285] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c1 > >> <7>[ 0.534290] pci 0000:00:1d.2: Performing full reset > >> <6>[ 0.534307] pci 0000:00:1d.2: PCI INT C disabled > >> <6>[ 0.534330] pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ > >> 23 > >> <6>[ 0.534373] pci 0000:00:1d.7: PCI INT D disabled > >> <7>[ 0.534412] PCI: CLS 32 bytes, default 64 > >> <6>[ 0.534524] Trying to unpack rootfs image as initramfs... > >> <6>[ 0.589060] Freeing initrd memory: 1272k freed > >> <6>[ 0.592809] microcode: CPU0 sig=0x106c2, pf=0x1, revision=0x217 > >> <6>[ 0.592824] microcode: CPU1 sig=0x106c2, pf=0x1, revision=0x217 > >> <6>[ 0.592930] microcode: Microcode Update Driver: v2.00 > >> <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba > >> <6>[ 0.596372] ashmem: initialized > >> <5>[ 0.596514] VFS: Disk quotas dquot_6.5.2 > >> <4>[ 0.596587] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > >> <6>[ 0.596953] squashfs: version 4.0 (2009/01/31) Phillip Lougher > >> <6>[ 0.597020] fuse init (API version 7.16) > >> <6>[ 0.597195] msgmni has been set to 1759 > >> <6>[ 0.597954] io scheduler noop registered > >> <6>[ 0.597960] io scheduler deadline registered > >> <6>[ 0.598001] io scheduler cfq registered (default) > >> <6>[ 0.598565] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > >> <7>[ 0.603663] power_supply ADP1: uevent > >> <7>[ 0.603671] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 > >> <7>[ 0.605592] power_supply ADP1: prop ONLINE=1 > >> <7>[ 0.605695] power_supply ADP1: power_supply_changed > >> <6>[ 0.605708] ACPI: AC Adapter [ADP1] (on-line) > >> <7>[ 0.605749] power_supply ADP1: power_supply_changed_work > >> <6>[ 0.606019] input: Power Button as > >> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 > >> <6>[ 0.606031] ACPI: Power Button [PWRB] > >> <6>[ 0.606203] input: Lid Switch as > >> /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 > >> <6>[ 0.606251] ACPI: Lid Switch [LID] > >> <7>[ 0.606565] ACPI: acpi_idle registered with cpuidle > >> <7>[ 0.607866] power_supply ADP1: power_supply_update_gen_leds 1 > >> <7>[ 0.607893] power_supply ADP1: uevent > >> <7>[ 0.607905] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 > >> <7>[ 0.610602] power_supply ADP1: prop ONLINE=1 > >> <7>[ 0.639031] power_supply BAT0: uevent > >> <7>[ 0.639038] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > >> <7>[ 0.674109] power_supply BAT0: prop STATUS=Unknown > >> <7>[ 0.674120] power_supply BAT0: prop PRESENT=1 > >> <7>[ 0.674128] power_supply BAT0: prop TECHNOLOGY=Li-ion > >> <7>[ 0.674135] power_supply BAT0: prop CYCLE_COUNT=0 > >> <7>[ 0.674143] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=7400000 > >> <7>[ 0.674150] power_supply BAT0: prop VOLTAGE_NOW=8320000 > >> <7>[ 0.674157] power_supply BAT0: prop CURRENT_NOW=65535000 > >> <7>[ 0.674165] power_supply BAT0: prop CHARGE_FULL_DESIGN=2700000 > >> <7>[ 0.674172] power_supply BAT0: prop CHARGE_FULL=2919000 > >> <7>[ 0.674179] power_supply BAT0: prop CHARGE_NOW=2871000 > >> <7>[ 0.674186] power_supply BAT0: prop MODEL_NAME=Menlow > >> <7>[ 0.674193] power_supply BAT0: prop MANUFACTURER=LC Computer > >> <7>[ 0.674200] power_supply BAT0: prop SERIAL_NUMBER=53001 > >> <7>[ 0.674308] power_supply BAT0: power_supply_changed > >> <6>[ 0.674344] ACPI: Battery Slot [BAT0] (battery present) > >> <7>[ 0.674460] power_supply BAT0: power_supply_changed_work > >> <7>[ 0.674472] power_supply BAT0: power_supply_update_bat_leds 0 > >> <7>[ 0.674498] power_supply BAT0: uevent > >> <7>[ 0.674505] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > >> <7>[ 0.674516] power_supply BAT0: prop STATUS=Unknown > >> <7>[ 0.674523] power_supply BAT0: prop PRESENT=1 > >> <7>[ 0.674530] power_supply BAT0: prop TECHNOLOGY=Li-ion > >> <7>[ 0.674537] power_supply BAT0: prop CYCLE_COUNT=0 > >> <7>[ 0.674544] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=7400000 > >> <7>[ 0.674552] power_supply BAT0: prop VOLTAGE_NOW=8320000 > >> <7>[ 0.674559] power_supply BAT0: prop CURRENT_NOW=65535000 > >> <7>[ 0.674566] power_supply BAT0: prop CHARGE_FULL_DESIGN=2700000 > >> <7>[ 0.674574] power_supply BAT0: prop CHARGE_FULL=2919000 > >> <7>[ 0.674581] power_supply BAT0: prop CHARGE_NOW=2871000 > >> <7>[ 0.674588] power_supply BAT0: prop MODEL_NAME=Menlow > >> <7>[ 0.674595] power_supply BAT0: prop MANUFACTURER=LC Computer > >> <7>[ 0.674602] power_supply BAT0: prop SERIAL_NUMBER=53001 > >> <6>[ 0.723183] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > >> <6>[ 1.141177] Linux agpgart interface v0.103 > >> <6>[ 1.145673] brd: module loaded > >> <6>[ 1.147793] loop: module loaded > >> <7>[ 1.148240] ahci 0000:02:00.0: version 3.0 > >> <6>[ 1.148272] ahci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ > >> 17 > >> <6>[ 1.160058] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps > >> 0x3 impl SATA mode > >> <6>[ 1.160068] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio > >> slum part > >> <7>[ 1.160079] ahci 0000:02:00.0: setting latency timer to 64 > >> <6>[ 1.161293] scsi0 : ahci > >> <6>[ 1.161629] scsi1 : ahci > >> <6>[ 1.161950] ata1: SATA max UDMA/133 abar m8192@0xcfdfe000 port > >> 0xcfdfe100 irq 17 > >> <6>[ 1.161960] ata2: SATA max UDMA/133 abar m8192@0xcfdfe000 port > >> 0xcfdfe180 irq 17 > >> <7>[ 1.162296] pata_sch 0000:00:1f.1: version 0.2 > >> <7>[ 1.162384] pata_sch 0000:00:1f.1: setting latency timer to 64 > >> <6>[ 1.163360] scsi2 : pata_sch > >> <6>[ 1.163610] scsi3 : pata_sch > >> <6>[ 1.164268] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 > >> irq 14 > >> <6>[ 1.164276] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 > >> irq 15 > >> <6>[ 1.165737] tun: Universal TUN/TAP device driver, 1.6 > >> <6>[ 1.165743] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> > >> <6>[ 1.166102] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > >> <7>[ 1.166111] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 > >> <6>[ 1.166174] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> > >> IRQ 23 > >> <7>[ 1.166217] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > >> <6>[ 1.166225] ehci_hcd 0000:00:1d.7: EHCI Host Controller > >> <6>[ 1.166240] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned > >> bus number 1 > >> <7>[ 1.166259] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103208 dbg=1 > >> cc=3 pcc=2 ordered !ppc ports=8 > >> <7>[ 1.166270] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 > >> uframes 1024 64 bit addr > >> <6>[ 1.166315] ehci_hcd 0000:00:1d.7: debug port 1 > >> <7>[ 1.166326] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 > >> ithresh=8 period=1024 Reset HALT > >> <7>[ 1.170205] ehci_hcd 0000:00:1d.7: bogus port configuration: cc=3 x > >> pcc=2 < ports=8 > >> <7>[ 1.170219] ehci_hcd 0000:00:1d.7: cache line size of 32 is not > >> supported > >> <7>[ 1.170225] ehci_hcd 0000:00:1d.7: supports USB remote wakeup > >> <6>[ 1.170268] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff5bc00 > >> <7>[ 1.170279] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 > >> ithresh=8 period=1024 Reset HALT > >> <7>[ 1.174172] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 > >> ithresh=1 period=1024 RUN > >> <6>[ 1.190209] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > >> <7>[ 1.190295] usb usb1: default language 0x0409 > >> <7>[ 1.190311] usb usb1: udev 1, busnum 1, minor = 0 > >> <6>[ 1.190317] usb usb1: New USB device found, idVendor=1d6b, > >> idProduct=0002 > >> <6>[ 1.190323] usb usb1: New USB device strings: Mfr=3, Product=2, > >> SerialNumber=1 > >> <6>[ 1.190330] usb usb1: Product: EHCI Host Controller > >> <6>[ 1.190335] usb usb1: Manufacturer: Linux 3.0.36-android-x86-eeepc+ > >> ehci_hcd > >> <6>[ 1.190341] usb usb1: SerialNumber: 0000:00:1d.7 > >> <7>[ 1.190743] usb usb1: usb_probe_device > >> <7>[ 1.190753] usb usb1: configuration #1 chosen from 1 choice > >> <7>[ 1.190773] usb usb1: adding 1-0:1.0 (config #1, interface 0) > >> <7>[ 1.190897] hub 1-0:1.0: usb_probe_interface > >> <7>[ 1.190904] hub 1-0:1.0: usb_probe_interface - got id > >> <6>[ 1.190909] hub 1-0:1.0: USB hub found > >> <6>[ 1.190920] hub 1-0:1.0: 8 ports detected > >> <7>[ 1.190925] hub 1-0:1.0: standalone hub > >> <7>[ 1.190929] hub 1-0:1.0: no power switching (usb 1.0) > >> <7>[ 1.190935] hub 1-0:1.0: individual port over-current protection > >> <7>[ 1.190940] hub 1-0:1.0: power on to power good time: 20ms > >> <7>[ 1.190950] hub 1-0:1.0: local power source is good > >> <7>[ 1.190956] hub 1-0:1.0: trying to enable port power on non-switchable > >> hub > >> <6>[ 1.191170] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > >> <7>[ 1.191177] ohci_hcd: block sizes: ed 64 td 64 > >> <6>[ 1.191294] uhci_hcd: USB Universal Host Controller Interface driver > >> <6>[ 1.191373] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> > >> IRQ 20 > >> <7>[ 1.191390] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > >> <6>[ 1.191398] uhci_hcd 0000:00:1d.0: UHCI Host Controller > >> <6>[ 1.191411] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned > >> bus number 2 > >> <6>[ 1.191427] uhci_hcd 0000:00:1d.0: detected 2 ports > >> <7>[ 1.191435] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = > >> 0x0000 > >> <7>[ 1.191441] uhci_hcd 0000:00:1d.0: Performing full reset > >> <7>[ 1.191458] uhci_hcd 0000:00:1d.0: supports USB remote wakeup > >> <6>[ 1.191498] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480 > >> <7>[ 1.191573] usb usb2: default language 0x0409 > >> <7>[ 1.191592] usb usb2: udev 1, busnum 2, minor = 128 > >> <6>[ 1.191598] usb usb2: New USB device found, idVendor=1d6b, > >> idProduct=0001 > >> <6>[ 1.191604] usb usb2: New USB device strings: Mfr=3, Product=2, > >> SerialNumber=1 > >> <6>[ 1.191611] usb usb2: Product: UHCI Host Controller > >> <6>[ 1.191616] usb usb2: Manufacturer: Linux 3.0.36-android-x86-eeepc+ > >> uhci_hcd > >> <6>[ 1.191622] usb usb2: SerialNumber: 0000:00:1d.0 > >> <7>[ 1.191986] usb usb2: usb_probe_device > >> <7>[ 1.191996] usb usb2: configuration #1 chosen from 1 choice > >> <7>[ 1.192015] usb usb2: adding 2-0:1.0 (config #1, interface 0) > >> <7>[ 1.192134] hub 2-0:1.0: usb_probe_interface > >> <7>[ 1.192140] hub 2-0:1.0: usb_probe_interface - got id > >> <6>[ 1.192146] hub 2-0:1.0: USB hub found > >> <6>[ 1.192157] hub 2-0:1.0: 2 ports detected > >> <7>[ 1.192162] hub 2-0:1.0: standalone hub > >> <7>[ 1.192166] hub 2-0:1.0: no power switching (usb 1.0) > >> <7>[ 1.192171] hub 2-0:1.0: individual port over-current protection > >> <7>[ 1.192177] hub 2-0:1.0: power on to power good time: 2ms > >> <7>[ 1.192187] hub 2-0:1.0: local power source is good > >> <7>[ 1.192192] hub 2-0:1.0: trying to enable port power on non-switchable > >> hub > >> <7>[ 1.192274] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 > >> <6>[ 1.192314] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> > >> IRQ 21 > >> <7>[ 1.192329] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > >> <6>[ 1.192336] uhci_hcd 0000:00:1d.1: UHCI Host Controller > >> <6>[ 1.192349] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned > >> bus number 3 > >> <6>[ 1.192366] uhci_hcd 0000:00:1d.1: detected 2 ports > >> <7>[ 1.192374] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = > >> 0x0000 > >> <7>[ 1.192380] uhci_hcd 0000:00:1d.1: Performing full reset > >> <7>[ 1.192397] uhci_hcd 0000:00:1d.1: supports USB remote wakeup > >> <6>[ 1.192435] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000e080 > >> <7>[ 1.192511] usb usb3: default language 0x0409 > >> <7>[ 1.192526] usb usb3: udev 1, busnum 3, minor = 256 > >> <6>[ 1.192532] usb usb3: New USB device found, idVendor=1d6b, > >> idProduct=0001 > >> <6>[ 1.192538] usb usb3: New USB device strings: Mfr=3, Product=2, > >> SerialNumber=1 > >> <6>[ 1.192544] usb usb3: Product: UHCI Host Controller > >> <6>[ 1.192550] usb usb3: Manufacturer: Linux 3.0.36-android-x86-eeepc+ > >> uhci_hcd > >> <6>[ 1.192555] usb usb3: SerialNumber: 0000:00:1d.1 > >> <7>[ 1.192886] usb usb3: usb_probe_device > >> <7>[ 1.192895] usb usb3: configuration #1 chosen from 1 choice > >> <7>[ 1.192914] usb usb3: adding 3-0:1.0 (config #1, interface 0) > >> <7>[ 1.193037] hub 3-0:1.0: usb_probe_interface > >> <7>[ 1.193044] hub 3-0:1.0: usb_probe_interface - got id > >> <6>[ 1.193049] hub 3-0:1.0: USB hub found > >> <6>[ 1.193060] hub 3-0:1.0: 2 ports detected > >> <7>[ 1.193065] hub 3-0:1.0: standalone hub > >> <7>[ 1.193069] hub 3-0:1.0: no power switching (usb 1.0) > >> <7>[ 1.193074] hub 3-0:1.0: individual port over-current protection > >> <7>[ 1.193080] hub 3-0:1.0: power on to power good time: 2ms > >> <7>[ 1.193089] hub 3-0:1.0: local power source is good > >> <7>[ 1.193095] hub 3-0:1.0: trying to enable port power on non-switchable > >> hub > >> <7>[ 1.193171] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 > >> <6>[ 1.193210] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> > >> IRQ 22 > >> <7>[ 1.193224] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > >> <6>[ 1.193231] uhci_hcd 0000:00:1d.2: UHCI Host Controller > >> <6>[ 1.193244] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned > >> bus number 4 > >> <6>[ 1.193258] uhci_hcd 0000:00:1d.2: detected 2 ports > >> <7>[ 1.193266] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = > >> 0x0000 > >> <7>[ 1.193271] uhci_hcd 0000:00:1d.2: Performing full reset > >> <7>[ 1.193289] uhci_hcd 0000:00:1d.2: supports USB remote wakeup > >> <6>[ 1.193328] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000ef00 > >> <7>[ 1.193404] usb usb4: default language 0x0409 > >> <7>[ 1.193419] usb usb4: udev 1, busnum 4, minor = 384 > >> <6>[ 1.193425] usb usb4: New USB device found, idVendor=1d6b, > >> idProduct=0001 > >> <6>[ 1.193432] usb usb4: New USB device strings: Mfr=3, Product=2, > >> SerialNumber=1 > >> <6>[ 1.193438] usb usb4: Product: UHCI Host Controller > >> <6>[ 1.193443] usb usb4: Manufacturer: Linux 3.0.36-android-x86-eeepc+ > >> uhci_hcd > >> <6>[ 1.193449] usb usb4: SerialNumber: 0000:00:1d.2 > >> <7>[ 1.193777] usb usb4: usb_probe_device > >> <7>[ 1.193786] usb usb4: configuration #1 chosen from 1 choice > >> <7>[ 1.193804] usb usb4: adding 4-0:1.0 (config #1, interface 0) > >> <7>[ 1.193925] hub 4-0:1.0: usb_probe_interface > >> <7>[ 1.193931] hub 4-0:1.0: usb_probe_interface - got id > >> <6>[ 1.193937] hub 4-0:1.0: USB hub found > >> <6>[ 1.193949] hub 4-0:1.0: 2 ports detected > >> <7>[ 1.193954] hub 4-0:1.0: standalone hub > >> <7>[ 1.193958] hub 4-0:1.0: no power switching (usb 1.0) > >> <7>[ 1.193963] hub 4-0:1.0: individual port over-current protection > >> <7>[ 1.193969] hub 4-0:1.0: power on to power good time: 2ms > >> <7>[ 1.193978] hub 4-0:1.0: local power source is good > >> <7>[ 1.193984] hub 4-0:1.0: trying to enable port power on non-switchable > >> hub > >> <7>[ 1.194060] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 > >> <6>[ 1.194280] Initializing USB Mass Storage driver... > >> <6>[ 1.194422] usbcore: registered new interface driver usb-storage > >> <6>[ 1.194428] USB Mass Storage support registered. > >> <6>[ 1.194566] usbcore: registered new interface driver libusual > >> <6>[ 1.194798] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 > >> irq 1 > >> <4>[ 1.194805] i8042: PNP: PS/2 appears to have AUX port disabled, if > >> this is incorrect please boot with i8042.nopnp > >> <6>[ 1.196921] serio: i8042 KBD port at 0x60,0x64 irq 1 > >> <6>[ 1.197731] mousedev: PS/2 mouse device common for all mice > >> <6>[ 1.198306] usbcore: registered new interface driver hanwang > >> <6>[ 1.199084] rtc_cmos 00:02: RTC can wake from S4 > >> <7>[ 1.199153] rtc (null): alarm rollover: day > >> <6>[ 1.199466] using rtc device, rtc_cmos, for alarms > >> <7>[ 1.199476] rtc_cmos: dev (254:0) > >> <6>[ 1.199494] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 > >> <6>[ 1.199537] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet > >> irqs > >> <6>[ 1.199635] i2c /dev entries driver > >> <6>[ 1.199907] device-mapper: uevent: version 1.0.3 > >> <6>[ 1.200251] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) > >> initialised: dm-devel@xxxxxxxxxx > >> <6>[ 1.200300] cpuidle: using governor ladder > >> <6>[ 1.200305] cpuidle: using governor menu > >> <6>[ 1.200399] sdhci: Secure Digital Host Controller Interface driver > >> <6>[ 1.200404] sdhci: Copyright(c) Pierre Ossman > >> <6>[ 1.200877] usbcore: registered new interface driver usbhid > >> <6>[ 1.200883] usbhid: USB HID core driver > >> <6>[ 1.201404] logger: created 256K log 'log_main' > >> <6>[ 1.201608] logger: created 256K log 'log_events' > >> <6>[ 1.201792] logger: created 256K log 'log_radio' > >> <6>[ 1.201974] logger: created 256K log 'log_system' > >> <6>[ 1.202068] oprofile: using NMI interrupt. > >> <6>[ 1.202141] GACT probability NOT on > >> <6>[ 1.202149] Mirror/redirect action on > >> <6>[ 1.202154] u32 classifier > >> <6>[ 1.202157] Actions configured > >> <6>[ 1.202162] Netfilter messages via NETLINK v0.30. > >> <6>[ 1.202207] nf_conntrack version 0.5.0 (14074 buckets, 56296 max) > >> <6>[ 1.202722] ctnetlink v0.93: registering with nfnetlink. > >> <6>[ 1.202746] NF_TPROXY: Transparent proxy support initialized, version > >> 4.1.0 > >> <6>[ 1.202752] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. > >> <6>[ 1.203149] xt_time: kernel timezone is -0000 > >> <6>[ 1.204364] ip_tables: (C) 2000-2006 Netfilter Core Team > >> <6>[ 1.204466] arp_tables: (C) 2002 David S. Miller > >> <6>[ 1.204493] TCP cubic registered > >> <6>[ 1.204620] NET: Registered protocol family 10 > >> <6>[ 1.207589] Mobile IPv6 > >> <6>[ 1.207612] ip6_tables: (C) 2000-2006 Netfilter Core Team > >> <6>[ 1.207773] IPv6 over IPv4 tunneling driver > >> <6>[ 1.211465] NET: Registered protocol family 17 > >> <6>[ 1.211488] NET: Registered protocol family 15 > >> <6>[ 1.211504] NET: Registered protocol family 35 > >> <6>[ 1.211609] Using IPI No-Shortcut mode > >> <6>[ 1.212827] rtc_cmos 00:02: setting system clock to 2013-02-04 > >> 10:19:25 UTC (1359973165) > >> <6>[ 1.222469] input: AT Translated Set 2 keyboard as > >> /devices/platform/i8042/serio0/input/input2 > >> <7>[ 1.290068] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 > >> ACK POWER sig=j CSC CONNECT > >> <7>[ 1.290082] hub 1-0:1.0: port 1: status 0501 change 0001 > >> <7>[ 1.290099] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001803 0 > >> ACK POWER sig=j CSC CONNECT > >> <7>[ 1.290108] hub 1-0:1.0: port 2: status 0501 change 0001 > >> <7>[ 1.290127] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001803 0 > >> ACK POWER sig=j CSC CONNECT > >> <7>[ 1.290135] hub 1-0:1.0: port 4: status 0501 change 0001 > >> <7>[ 1.290153] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001803 0 > >> ACK POWER sig=j CSC CONNECT > >> <7>[ 1.290161] hub 1-0:1.0: port 6: status 0501 change 0001 > >> <7>[ 1.290180] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0 > >> ACK POWER sig=j CSC CONNECT > >> <7>[ 1.290188] hub 1-0:1.0: port 8: status 0501 change 0001 > >> <7>[ 1.290206] uhci_hcd 0000:00:1d.0: port 1 portsc 0082,00 > >> <7>[ 1.290220] uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00 > >> <7>[ 1.290239] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 1.290255] uhci_hcd 0000:00:1d.1: port 2 portsc 0082,00 > >> <7>[ 1.290274] uhci_hcd 0000:00:1d.2: port 2 portsc 0082,00 > >> <7>[ 1.390051] hub 1-0:1.0: state 7 ports 8 chg 0156 evt 0000 > >> <7>[ 1.390067] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s > >> <7>[ 1.450327] ehci_hcd 0000:00:1d.7: port 1 high speed > >> <7>[ 1.450338] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001005 0 > >> ACK POWER sig=se0 PE CONNECT > >> <6>[ 1.510041] usb 1-1: new high speed USB device number 2 using ehci_hcd > >> <6>[ 1.510055] ata2: SATA link down (SStatus 0 SControl 300) > >> <7>[ 1.570326] ehci_hcd 0000:00:1d.7: port 1 high speed > >> <7>[ 1.570337] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001005 0 > >> ACK POWER sig=se0 PE CONNECT > >> <6>[ 1.590028] Refined TSC clocksource calibration: 1595.991 MHz. > >> <6>[ 1.590039] Switching to clocksource tsc > >> <7>[ 1.660720] usb 1-1: skipped 1 descriptor after endpoint > >> <7>[ 1.660727] usb 1-1: skipped 1 descriptor after endpoint > >> <7>[ 1.660733] usb 1-1: skipped 1 descriptor after endpoint > >> <7>[ 1.660739] usb 1-1: skipped 1 descriptor after endpoint > >> <7>[ 1.660966] usb 1-1: default language 0x0409 > >> <7>[ 1.661342] usb 1-1: udev 2, busnum 1, minor = 1 > >> <6>[ 1.661348] usb 1-1: New USB device found, idVendor=059f, > >> idProduct=1046 > >> <6>[ 1.661355] usb 1-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 1.661361] usb 1-1: Product: FastKey USB3.0 > >> <6>[ 1.661366] usb 1-1: Manufacturer: LaCie > >> <6>[ 1.661371] usb 1-1: SerialNumber: 63422992156125000063 > >> <7>[ 1.661771] usb 1-1: usb_probe_device > >> <7>[ 1.661782] usb 1-1: configuration #1 chosen from 1 choice > >> <7>[ 1.661981] usb 1-1: adding 1-1:1.0 (config #1, interface 0) > >> <7>[ 1.662124] usb-storage 1-1:1.0: usb_probe_interface > >> <7>[ 1.662140] usb-storage 1-1:1.0: usb_probe_interface - got id > >> <6>[ 1.662234] scsi4 : usb-storage 1-1:1.0 > >> <7>[ 1.662527] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s > >> <6>[ 1.710041] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > >> <7>[ 1.720201] ehci_hcd 0000:00:1d.7: port 2 full speed --> companion > >> <7>[ 1.720213] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003801 0 > >> ACK POWER OWNER sig=j CONNECT > >> <7>[ 1.720222] hub 1-0:1.0: port 2 not reset yet, waiting 50ms > >> <7>[ 1.780024] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 1.780058] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s > >> <7>[ 1.840201] ehci_hcd 0000:00:1d.7: port 4 high speed > >> <7>[ 1.840212] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 > >> ACK POWER sig=se0 PE CONNECT > >> <6>[ 1.900023] usb 1-4: new high speed USB device number 4 using ehci_hcd > >> <7>[ 1.960325] ehci_hcd 0000:00:1d.7: port 4 high speed > >> <7>[ 1.960336] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 > >> ACK POWER sig=se0 PE CONNECT > >> <6>[ 2.013998] ata1.00: ATA-8: TOSHIBA MK1235GSL, PV010A, max UDMA/100 > >> <6>[ 2.014005] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth > >> 31/32), AA > >> <6>[ 2.014867] ata1.00: configured for UDMA/100 > >> <5>[ 2.015092] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1235GS > >> PV01 PQ: 0 ANSI: 5 > >> <5>[ 2.015575] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 > >> GB/111 GiB) > >> <5>[ 2.015754] sd 0:0:0:0: [sda] Write Protect is off > >> <7>[ 2.015764] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > >> <5>[ 2.015840] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > >> enabled, doesn't support DPO or FUA > >> <5>[ 2.016006] sd 0:0:0:0: Attached scsi generic sg0 type 0 > >> <7>[ 2.051348] usb 1-4: skipped 1 descriptor after configuration > >> <7>[ 2.051356] usb 1-4: skipped 4 descriptors after interface > >> <7>[ 2.051363] usb 1-4: skipped 2 descriptors after interface > >> <7>[ 2.051371] usb 1-4: skipped 2 descriptors after endpoint > >> <7>[ 2.051376] usb 1-4: skipped 5 descriptors after interface > >> <7>[ 2.051383] usb 1-4: skipped 1 descriptor after endpoint > >> <7>[ 2.051389] usb 1-4: skipped 12 descriptors after endpoint > >> <7>[ 2.051396] usb 1-4: udev 4, busnum 1, minor = 3 > >> <6>[ 2.051402] usb 1-4: New USB device found, idVendor=eb1a, > >> idProduct=2776 > >> <6>[ 2.051408] usb 1-4: New USB device strings: Mfr=0, Product=0, > >> SerialNumber=0 > >> <7>[ 2.051820] usb 1-4: usb_probe_device > >> <7>[ 2.051829] usb 1-4: configuration #1 chosen from 1 choice > >> <7>[ 2.051990] usb 1-4: adding 1-4:1.2 (config #1, interface 2) > >> <7>[ 2.052143] usb 1-4: adding 1-4:1.3 (config #1, interface 3) > >> <7>[ 2.052284] usb 1-4: adding 1-4:1.0 (config #1, interface 0) > >> <7>[ 2.052444] usb 1-4: adding 1-4:1.1 (config #1, interface 1) > >> <7>[ 2.052626] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s > >> <6>[ 2.099713] sda: sda1 sda2 < sda5 sda6 > > >> <5>[ 2.100816] sd 0:0:0:0: [sda] Attached SCSI disk > >> <7>[ 2.110202] ehci_hcd 0000:00:1d.7: port 6 full speed --> companion > >> <7>[ 2.110215] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 003801 0 > >> ACK POWER OWNER sig=j CONNECT > >> <7>[ 2.110226] hub 1-0:1.0: port 6 not reset yet, waiting 50ms > >> <7>[ 2.170028] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 2.170072] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s > >> <6>[ 2.180874] Freeing unused kernel memory: 376k freed > >> <6>[ 2.181216] Write protecting the kernel text: 4268k > >> <6>[ 2.181270] Write protecting the kernel read-only data: 1524k > >> <7>[ 2.230335] ehci_hcd 0000:00:1d.7: port 8 high speed > >> <7>[ 2.230354] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001005 0 > >> ACK POWER sig=se0 PE CONNECT > >> <6>[ 2.290089] usb 1-8: new high speed USB device number 6 using ehci_hcd > >> <7>[ 2.350337] ehci_hcd 0000:00:1d.7: port 8 high speed > >> <7>[ 2.350355] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001005 0 > >> ACK POWER sig=se0 PE CONNECT > >> <7>[ 2.441260] usb 1-8: skipped 1 descriptor after configuration > >> <7>[ 2.441271] usb 1-8: skipped 5 descriptors after interface > >> <7>[ 2.441280] usb 1-8: skipped 1 descriptor after endpoint > >> <7>[ 2.441290] usb 1-8: skipped 12 descriptors after endpoint > >> <7>[ 2.441301] usb 1-8: udev 6, busnum 1, minor = 5 > >> <6>[ 2.441309] usb 1-8: New USB device found, idVendor=eb1a, > >> idProduct=2771 > >> <6>[ 2.441317] usb 1-8: New USB device strings: Mfr=0, Product=0, > >> SerialNumber=0 > >> <7>[ 2.442042] usb 1-8: usb_probe_device > >> <7>[ 2.442055] usb 1-8: configuration #1 chosen from 1 choice > >> <7>[ 2.442262] usb 1-8: adding 1-8:1.0 (config #1, interface 0) > >> <7>[ 2.444525] usb 1-8: adding 1-8:1.1 (config #1, interface 1) > >> <7>[ 2.446860] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004 > >> <7>[ 2.446886] uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00 > >> <7>[ 2.446907] hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s > >> <7>[ 2.540058] usb usb3: suspend_rh (auto-stop) > >> <7>[ 2.600063] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms > >> status 0x101 > >> <5>[ 2.661005] scsi 4:0:0:0: Direct-Access LaCie FastKey USB3.0 > >> 3468 PQ: 0 ANSI: 4 > >> <5>[ 2.664278] sd 4:0:0:0: [sdb] 58400768 512-byte logical blocks: (29.9 > >> GB/27.8 GiB) > >> <5>[ 2.665011] sd 4:0:0:0: Attached scsi generic sg1 type 0 > >> <5>[ 2.665228] sd 4:0:0:0: [sdb] Write Protect is off > >> <7>[ 2.665240] sd 4:0:0:0: [sdb] Mode Sense: 67 00 10 08 > >> <3>[ 2.666156] sd 4:0:0:0: [sdb] No Caching mode page present > >> <3>[ 2.666167] sd 4:0:0:0: [sdb] Assuming drive cache: write through > >> <3>[ 2.669487] sd 4:0:0:0: [sdb] No Caching mode page present > >> <3>[ 2.669495] sd 4:0:0:0: [sdb] Assuming drive cache: write through > >> <6>[ 2.670111] sdb: sdb1 > >> <3>[ 2.673124] sd 4:0:0:0: [sdb] No Caching mode page present > >> <3>[ 2.673132] sd 4:0:0:0: [sdb] Assuming drive cache: write through > >> <5>[ 2.673141] sd 4:0:0:0: [sdb] Attached SCSI disk > >> <6>[ 2.720040] usb 2-2: new full speed USB device number 2 using uhci_hcd > >> <7>[ 2.860021] usb 2-2: ep0 maxpacket = 8 > >> <7>[ 2.882571] usb 2-2: default language 0x0409 > >> <7>[ 2.898575] usb 2-2: udev 2, busnum 2, minor = 129 > >> <6>[ 2.898581] usb 2-2: New USB device found, idVendor=413c, > >> idProduct=1002 > >> <6>[ 2.898588] usb 2-2: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=0 > >> <6>[ 2.898595] usb 2-2: Product: Dell USB Keyboard Hub > >> <6>[ 2.898600] usb 2-2: Manufacturer: Dell > >> <7>[ 2.899119] usb 2-2: usb_probe_device > >> <7>[ 2.899136] usb 2-2: configuration #1 chosen from 1 choice > >> <7>[ 2.904581] usb 2-2: adding 2-2:1.0 (config #1, interface 0) > >> <7>[ 2.906825] hub 2-2:1.0: usb_probe_interface > >> <7>[ 2.906838] hub 2-2:1.0: usb_probe_interface - got id > >> <6>[ 2.906882] hub 2-2:1.0: USB hub found > >> <6>[ 2.907598] hub 2-2:1.0: 3 ports detected > >> <7>[ 2.907643] hub 2-2:1.0: compound device; port removable status: FRR > >> <7>[ 2.907652] hub 2-2:1.0: individual port power switching > >> <7>[ 2.907659] hub 2-2:1.0: individual port over-current protection > >> <7>[ 2.907667] hub 2-2:1.0: power on to power good time: 100ms > >> <7>[ 2.908587] hub 2-2:1.0: hub controller current requirement: 90mA > >> <7>[ 2.908595] hub 2-2:1.0: 100mA bus power budget for each child > >> <7>[ 2.909576] hub 2-2:1.0: enabling power on all ports > >> <7>[ 2.912640] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 > >> <7>[ 2.912649] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004 > >> <7>[ 2.912663] uhci_hcd 0000:00:1d.2: port 2 portsc 0093,00 > >> <7>[ 2.912676] hub 4-0:1.0: port 2, status 0101, change 0001, 12 Mb/s > >> <3>[ 3.000179] VFS: could not find a valid V7 on sda. > >> <7>[ 3.011577] hub 2-2:1.0: port 1: status 0101 change 0001 > >> <7>[ 3.014572] hub 2-2:1.0: port 3: status 0301 change 0001 > >> <7>[ 3.070024] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms > >> status 0x101 > >> <7>[ 3.110029] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, > >> phase 0, 12 us > >> <6>[ 3.190094] usb 4-2: new full speed USB device number 2 using uhci_hcd > >> <7>[ 3.344581] usb 4-2: udev 2, busnum 4, minor = 385 > >> <6>[ 3.344589] usb 4-2: New USB device found, idVendor=0cf3, > >> idProduct=3000 > >> <6>[ 3.344596] usb 4-2: New USB device strings: Mfr=0, Product=0, > >> SerialNumber=0 > >> <7>[ 3.345113] usb 4-2: usb_probe_device > >> <7>[ 3.345127] usb 4-2: configuration #1 chosen from 1 choice > >> <7>[ 3.348599] usb 4-2: adding 4-2:1.0 (config #1, interface 0) > >> <7>[ 3.348949] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 3.348980] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 3.349002] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 3.500030] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 3.500054] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 3.500079] usb usb3: wakeup_rh (auto-start) > >> <7>[ 3.560025] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 3.560061] hub 2-2:1.0: state 7 ports 3 chg 000a evt 0000 > >> <7>[ 3.561577] hub 2-2:1.0: port 1, status 0101, change 0000, 12 Mb/s > >> <4>[ 3.570068] mount: sending ioctl 5310 to a partition! > >> <4>[ 3.570075] mount: sending ioctl 5310 to a partition! > >> <6>[ 3.641580] usb 2-2.1: new full speed USB device number 3 using > >> uhci_hcd > >> <3>[ 3.680184] VFS: could not find a valid V7 on sda1. > >> <7>[ 3.740019] usb 2-2.1: ep0 maxpacket = 8 > >> <7>[ 3.761624] usb 2-2.1: skipped 1 descriptor after interface > >> <7>[ 3.761638] usb 2-2.1: skipped 1 descriptor after interface > >> <7>[ 3.766588] usb 2-2.1: default language 0x0409 > >> <7>[ 3.782574] usb 2-2.1: udev 3, busnum 2, minor = 130 > >> <6>[ 3.782581] usb 2-2.1: New USB device found, idVendor=413c, > >> idProduct=2002 > >> <6>[ 3.782588] usb 2-2.1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=0 > >> <6>[ 3.782595] usb 2-2.1: Product: Dell USB Keyboard Hub > >> <6>[ 3.782600] usb 2-2.1: Manufacturer: Dell > >> <7>[ 3.783155] usb 2-2.1: usb_probe_device > >> <7>[ 3.783174] usb 2-2.1: configuration #1 chosen from 1 choice > >> <7>[ 3.787579] usb 2-2.1: adding 2-2.1:1.0 (config #1, interface 0) > >> <7>[ 3.789824] usbhid 2-2.1:1.0: usb_probe_interface > >> <7>[ 3.789836] usbhid 2-2.1:1.0: usb_probe_interface - got id > >> <6>[ 3.792903] input: Dell Dell USB Keyboard Hub as > >> /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input3 > >> <7>[ 3.792944] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 16, > >> phase 8, 17 us > >> <6>[ 3.794858] generic-usb 0003:413C:2002.0001: input,hidraw0: USB HID > >> v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.0-2.1/input0 > >> <7>[ 3.794926] usb 2-2.1: adding 2-2.1:1.1 (config #1, interface 1) > >> <7>[ 3.796861] usbhid 2-2.1:1.1: usb_probe_interface > >> <7>[ 3.796875] usbhid 2-2.1:1.1: usb_probe_interface - got id > >> <6>[ 3.806926] input: Dell Dell USB Keyboard Hub as > >> /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input4 > >> <7>[ 3.806964] uhci_hcd 0000:00:1d.0: reserve dev 3 ep82-INT, period 32, > >> phase 16, 14 us > >> <6>[ 3.808804] generic-usb 0003:413C:2002.0002: input,hidraw1: USB HID > >> v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.0-2.1/input1 > >> <7>[ 3.808898] hub 2-2:1.0: 410mA power budget left > >> <7>[ 3.809617] hub 2-2:1.0: port 3, status 0301, change 0000, 1.5 Mb/s > >> <6>[ 3.891590] usb 2-2.3: new low speed USB device number 4 using > >> uhci_hcd > >> <7>[ 4.008601] usb 2-2.3: skipped 1 descriptor after interface > >> <7>[ 4.013573] usb 2-2.3: default language 0x0409 > >> <7>[ 4.029589] usb 2-2.3: udev 4, busnum 2, minor = 131 > >> <6>[ 4.029597] usb 2-2.3: New USB device found, idVendor=046d, > >> idProduct=c016 > >> <6>[ 4.029605] usb 2-2.3: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=0 > >> <6>[ 4.029611] usb 2-2.3: Product: Optical USB Mouse > >> <6>[ 4.029616] usb 2-2.3: Manufacturer: Logitech > >> <7>[ 4.030161] usb 2-2.3: usb_probe_device > >> <7>[ 4.030177] usb 2-2.3: configuration #1 chosen from 1 choice > >> <7>[ 4.032617] usb 2-2.3: adding 2-2.3:1.0 (config #1, interface 0) > >> <7>[ 4.032899] usbhid 2-2.3:1.0: usb_probe_interface > >> <7>[ 4.032911] usbhid 2-2.3:1.0: usb_probe_interface - got id > >> <6>[ 4.046696] input: Logitech Optical USB Mouse as > >> /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input5 > >> <6>[ 4.049979] generic-usb 0003:046D:C016.0003: input,hidraw2: USB HID > >> v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2.3/input0 > >> <7>[ 4.050102] hub 2-2:1.0: 310mA power budget left > >> <7>[ 4.050114] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 4.050136] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 4.050155] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <3>[ 4.131868] EXT3-fs (sda2): error: unable to read superblock > >> <7>[ 4.210059] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <3>[ 4.210138] EXT2-fs (sda2): error: unable to read superblock > >> <3>[ 4.300073] EXT4-fs (sda2): unable to read superblock > >> <6>[ 4.330029] usb 3-1: new low speed USB device number 2 using uhci_hcd > >> <7>[ 4.488581] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 4.493573] usb 3-1: default language 0x0409 > >> <7>[ 4.512574] usb 3-1: udev 2, busnum 3, minor = 257 > >> <6>[ 4.512582] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 4.512588] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 4.512595] usb 3-1: Product: Tablet > >> <6>[ 4.512600] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 4.512605] usb 3-1: SerialNumber: V1.0 > >> <7>[ 4.513127] usb 3-1: usb_probe_device > >> <7>[ 4.513142] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 4.515618] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 4.515897] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 4.515908] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 4.515941] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 4.515949] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 4.521678] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 4.521697] hub 2-2:1.0: state 7 ports 3 chg 0000 evt 0008 > >> <4>[ 4.640076] mount: sending ioctl 5310 to a partition! > >> <4>[ 4.640084] mount: sending ioctl 5310 to a partition! > >> <4>[ 4.640100] isofs_fill_super: bread failed, dev=sda2, iso_blknum=16, > >> block=32 > >> <3>[ 4.760183] VFS: could not find a valid V7 on sda2. > >> <4>[ 5.180061] mount: sending ioctl 5310 to a partition! > >> <4>[ 5.180070] mount: sending ioctl 5310 to a partition! > >> <3>[ 5.280273] VFS: could not find a valid V7 on sda5. > >> <3>[ 5.414734] EXT3-fs (sda6): error: couldn't mount because of > >> unsupported optional features (240) > >> <3>[ 5.460190] EXT2-fs (sda6): error: couldn't mount because of > >> unsupported optional features (240) > >> <6>[ 5.539523] EXT4-fs (sda6): mounted filesystem with ordered data mode. > >> Opts: (null) > >> <7>[ 6.290062] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 6.290079] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 6.290097] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 6.290105] usb 3-1: USB disconnect, device number 2 > >> <7>[ 6.290110] usb 3-1: unregistering device > >> <7>[ 6.290116] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 6.290403] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 6.450032] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <3>[ 7.200205] VFS: could not find a valid V7 on sda. > >> <7>[ 7.540044] usb usb3: suspend_rh (auto-stop) > >> <4>[ 7.780059] mount: sending ioctl 5310 to a partition! > >> <4>[ 7.780067] mount: sending ioctl 5310 to a partition! > >> <3>[ 7.960233] VFS: could not find a valid V7 on sda1. > >> <7>[ 8.269128] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 8.269149] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 8.269166] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 8.420027] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 8.420052] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 8.420081] usb usb3: wakeup_rh (auto-start) > >> <3>[ 8.431920] EXT3-fs (sda2): error: unable to read superblock > >> <7>[ 8.480047] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 8.480089] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 8.480102] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 8.480114] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <3>[ 8.490104] EXT2-fs (sda2): error: unable to read superblock > >> <3>[ 8.600077] EXT4-fs (sda2): unable to read superblock > >> <7>[ 8.640030] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 8.760028] usb 3-1: new low speed USB device number 3 using uhci_hcd > >> <7>[ 8.918580] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 8.923575] usb 3-1: default language 0x0409 > >> <7>[ 8.942580] usb 3-1: udev 3, busnum 3, minor = 258 > >> <6>[ 8.942587] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 8.942594] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 8.942600] usb 3-1: Product: Tablet > >> <6>[ 8.942605] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 8.942610] usb 3-1: SerialNumber: V1.0 > >> <7>[ 8.943130] usb 3-1: usb_probe_device > >> <7>[ 8.943146] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 8.945619] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 8.945913] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 8.945927] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 8.945959] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 8.945968] usbhid 3-1:1.0: usb_probe_interface - got id > >> <4>[ 8.950131] mount: sending ioctl 5310 to a partition! > >> <4>[ 8.950140] mount: sending ioctl 5310 to a partition! > >> <4>[ 8.950161] isofs_fill_super: bread failed, dev=sda2, iso_blknum=16, > >> block=32 > >> <7>[ 8.951674] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 8.951692] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <3>[ 9.150230] VFS: could not find a valid V7 on sda2. > >> <4>[ 9.610064] mount: sending ioctl 5310 to a partition! > >> <4>[ 9.610073] mount: sending ioctl 5310 to a partition! > >> <3>[ 9.710276] VFS: could not find a valid V7 on sda5. > >> <3>[ 9.843103] EXT3-fs (sda6): error: couldn't mount because of > >> unsupported optional features (240) > >> <3>[ 9.890189] EXT2-fs (sda6): error: couldn't mount because of > >> unsupported optional features (240) > >> <6>[ 9.967847] EXT4-fs (sda6): mounted filesystem with ordered data mode. > >> Opts: (null) > >> <7>[ 10.431240] ISO 9660 Extensions: Microsoft Joliet Level 3 > >> <7>[ 10.432232] ISO 9660 Extensions: RRIP_1991A > >> <3>[ 10.464208] EXT3-fs (loop0): error: couldn't mount because of > >> unsupported optional features (40) > >> <3>[ 10.500201] EXT2-fs (loop0): error: couldn't mount because of > >> unsupported optional features (40) > >> <6>[ 10.575452] EXT4-fs (loop0): mounted filesystem with ordered data > >> mode. Opts: (null) > >> <7>[ 10.790107] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 10.790129] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 10.790153] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 10.790164] usb 3-1: USB disconnect, device number 3 > >> <7>[ 10.790172] usb 3-1: unregistering device > >> <7>[ 10.790180] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 10.790529] usb 3-1: usb_disable_device nuking all URBs > >> <6>[ 10.886273] input: Video Bus as > >> /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 > >> <6>[ 10.886789] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: > >> no) > >> <6>[ 10.927279] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) > >> -> IRQ 16 > >> <7>[ 10.927366] HDA Intel 0000:00:1b.0: setting latency timer to 64 > >> <7>[ 10.950040] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <6>[ 11.041743] hda_codec: ALC662 rev1: BIOS auto-probing. > >> <6>[ 11.048019] input: HDA Intel MID Mic as > >> /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 > >> <6>[ 11.050511] input: HDA Intel MID Headphone as > >> /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 > >> <4>[ 11.090866] ACPI: resource (null) [io 0x0480-0x04bf] conflicts with > >> ACPI region PHO_ [io 0x4bc-0x4bc] > >> <6>[ 11.090877] ACPI: If an ACPI driver is available for this device, you > >> should use it instead of the native driver > >> <4>[ 11.092026] lpc_sch: probe of 0000:00:1f.0 failed with error -16 > >> <6>[ 11.120085] cfg80211: Calling CRDA to update world regulatory domain > >> <6>[ 11.169320] ath9k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> > >> IRQ 16 > >> <7>[ 11.169339] ath9k 0000:01:00.0: setting latency timer to 64 > >> <7>[ 11.218581] ath: EEPROM regdomain: 0x60 > >> <7>[ 11.218588] ath: EEPROM indicates we should expect a direct regpair > >> map > >> <7>[ 11.218597] ath: Country alpha2 being used: 00 > >> <7>[ 11.218601] ath: Regpair used: 0x60 > >> <7>[ 11.221499] ieee80211 phy0: Selected rate control algorithm > >> 'ath9k_rate_control' > >> <7>[ 11.233229] Registered led device: ath9k-phy0 > >> <6>[ 11.233257] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8b20000, > >> irq=16 > >> <6>[ 11.255823] input: PC Speaker as /devices/platform/pcspkr/input/input9 > >> <6>[ 11.291198] Linux video capture interface: v2.00 > >> <7>[ 11.297331] uvcvideo 1-4:1.0: usb_probe_interface > >> <7>[ 11.297346] uvcvideo 1-4:1.0: usb_probe_interface - got id > >> <6>[ 11.297401] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2776) > >> <6>[ 11.298957] input: UVC Camera (eb1a:2776) as > >> /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input10 > >> <7>[ 11.300818] uvcvideo 1-8:1.0: usb_probe_interface > >> <7>[ 11.300835] uvcvideo 1-8:1.0: usb_probe_interface - got id > >> <6>[ 11.300893] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2771) > >> <6>[ 11.302591] input: UVC Camera (eb1a:2771) as > >> /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input11 > >> <6>[ 11.304912] usbcore: registered new interface driver uvcvideo > >> <6>[ 11.304922] USB Video Class driver (v1.1.0) > >> <7>[ 11.323458] snd-usb-audio 1-4:1.2: usb_probe_interface > >> <7>[ 11.323480] snd-usb-audio 1-4:1.2: usb_probe_interface - got id > >> <6>[ 11.327220] usbcore: registered new interface driver snd-usb-audio > >> <6>[ 11.379059] Bluetooth: Core ver 2.16 > >> <6>[ 11.379285] NET: Registered protocol family 31 > >> <6>[ 11.379295] Bluetooth: HCI device and connection manager initialized > >> <6>[ 11.379304] Bluetooth: HCI socket layer initialized > >> <6>[ 11.379311] Bluetooth: L2CAP socket layer initialized > >> <6>[ 11.379330] Bluetooth: SCO socket layer initialized > >> <6>[ 11.381002] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > >> <6>[ 11.381013] Bluetooth: BNEP filters: protocol multicast > >> <6>[ 11.387970] Bluetooth: RFCOMM TTY layer initialized > >> <6>[ 11.387990] Bluetooth: RFCOMM socket layer initialized > >> <6>[ 11.387998] Bluetooth: RFCOMM ver 1.11 > >> <6>[ 11.418151] Bluetooth: Generic Bluetooth USB driver ver 0.6 > >> <6>[ 11.418421] usbcore: registered new interface driver btusb > >> <6>[ 11.426796] usbcore: registered new interface driver cdc_acm > >> <6>[ 11.426806] cdc_acm: USB Abstract Control Model driver for USB modems > >> and ISDN adapters > >> <6>[ 11.437295] usbcore: registered new interface driver usbserial > >> <6>[ 11.437306] usbserial: USB Serial Driver core > >> <6>[ 11.442693] USB Serial support registered for GSM modem (1-port) > >> <6>[ 11.444268] usbcore: registered new interface driver option > >> <6>[ 11.444277] option: v0.7.2:USB Driver for GSM modems > >> <6>[ 11.452144] PPP generic driver version 2.4.2 > >> <6>[ 11.456321] NET: Registered protocol family 24 > >> <6>[ 11.466852] PPP Deflate Compression module registered > >> <6>[ 11.470876] PPP BSD Compression module registered > >> <6>[ 11.519351] uvesafb: Intel Corporation, Intel(r)Poulsbo Graphics > >> Controller, Hardware Version 0.0, OEM: Intel(r)Poulsbo Graphics Chip > >> Accelerated VGA BIOS, VBE v3.0 > >> <6>[ 11.532228] uvesafb: VBIOS/hardware supports DDC2 transfers > >> <6>[ 11.544710] uvesafb: monitor limits: vf = 61 Hz, hf = 38 kHz, clk = 50 > >> MHz > >> <6>[ 11.544869] uvesafb: scrolling: redraw > >> <4>[ 11.544891] mtrr: type mismatch for 3f800000,400000 old: write-back > >> new: write-combining > >> <4>[ 11.544900] mtrr: type mismatch for 3f800000,200000 old: write-back > >> new: write-combining > >> <4>[ 11.544907] mtrr: type mismatch for 3f800000,100000 old: write-back > >> new: write-combining > >> <4>[ 11.544915] mtrr: type mismatch for 3f800000,80000 old: write-back > >> new: write-combining > >> <4>[ 11.544923] mtrr: type mismatch for 3f800000,40000 old: write-back > >> new: write-combining > >> <4>[ 11.544930] mtrr: type mismatch for 3f800000,20000 old: write-back > >> new: write-combining > >> <4>[ 11.544938] mtrr: type mismatch for 3f800000,10000 old: write-back > >> new: write-combining > >> <4>[ 11.544945] mtrr: type mismatch for 3f800000,8000 old: write-back new: > >> write-combining > >> <4>[ 11.544953] mtrr: type mismatch for 3f800000,4000 old: write-back new: > >> write-combining > >> <4>[ 11.544960] mtrr: type mismatch for 3f800000,2000 old: write-back new: > >> write-combining > >> <4>[ 11.544968] mtrr: type mismatch for 3f800000,1000 old: write-back new: > >> write-combining > >> <7>[ 12.040230] usb usb3: suspend_rh (auto-stop) > >> <6>[ 12.127682] Console: switching to colour frame buffer device 100x37 > >> <6>[ 12.137254] uvesafb: framebuffer at 0x3f800000, mapped to 0xf8d80000, > >> using 3750k, total 8000k > >> <6>[ 12.137262] fb0: VESA VGA frame buffer device > >> <7>[ 12.261636] power_supply ADP1: uevent > >> <7>[ 12.261644] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 > >> <7>[ 12.262949] power_supply ADP1: prop ONLINE=1 > >> <7>[ 12.263136] power_supply BAT0: uevent > >> <7>[ 12.263142] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > >> <7>[ 12.295885] power_supply BAT0: prop STATUS=Unknown > >> <7>[ 12.295898] power_supply BAT0: prop PRESENT=1 > >> <7>[ 12.295906] power_supply BAT0: prop TECHNOLOGY=Li-ion > >> <7>[ 12.295914] power_supply BAT0: prop CYCLE_COUNT=0 > >> <7>[ 12.295921] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=7400000 > >> <7>[ 12.295929] power_supply BAT0: prop VOLTAGE_NOW=8320000 > >> <7>[ 12.295937] power_supply BAT0: prop CURRENT_NOW=65535000 > >> <7>[ 12.295944] power_supply BAT0: prop CHARGE_FULL_DESIGN=2700000 > >> <7>[ 12.295952] power_supply BAT0: prop CHARGE_FULL=2919000 > >> <7>[ 12.295959] power_supply BAT0: prop CHARGE_NOW=2871000 > >> <7>[ 12.295967] power_supply BAT0: prop MODEL_NAME=Menlow > >> <7>[ 12.295974] power_supply BAT0: prop MANUFACTURER=LC Computer > >> <7>[ 12.295982] power_supply BAT0: prop SERIAL_NUMBER=53001 > >> <3>[ 12.314460] init: cannot open '/initlogo.rle' > >> <7>[ 12.699124] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 12.699144] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 12.699160] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <4>[ 12.782850] init (1): /proc/1/oom_adj is deprecated, please use > >> /proc/1/oom_score_adj instead. > >> <7>[ 12.850078] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 12.850112] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 12.850151] usb usb3: wakeup_rh (auto-start) > >> <7>[ 12.910060] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 12.910107] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 12.910120] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 12.910132] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 13.070065] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <7>[ 13.100930] uhci_hcd 0000:00:1d.0: reserve dev 4 ep81-INT, period 8, > >> phase 4, 93 us > >> <7>[ 13.141594] uhci_hcd 0000:00:1d.0: release dev 4 ep81-INT, period 8, > >> phase 4, 93 us > >> <6>[ 13.147490] warning: `rild' uses 32-bit capabilities (legacy support > >> in use) > >> <6>[ 13.190056] usb 3-1: new low speed USB device number 4 using uhci_hcd > >> <7>[ 13.348605] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 13.353599] usb 3-1: default language 0x0409 > >> <7>[ 13.372602] usb 3-1: udev 4, busnum 3, minor = 259 > >> <6>[ 13.372611] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 13.372618] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 13.372625] usb 3-1: Product: Tablet > >> <6>[ 13.372630] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 13.372636] usb 3-1: SerialNumber: V1.0 > >> <7>[ 13.372995] usb 3-1: usb_probe_device > >> <7>[ 13.373008] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 13.375622] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 13.375758] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 13.375768] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 13.375801] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 13.375809] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 13.381729] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <6>[ 14.250291] input: Android Power Button as > >> /devices/virtual/input/input12 > >> <7>[ 15.290077] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 15.290094] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 15.290112] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 15.290120] usb 3-1: USB disconnect, device number 4 > >> <7>[ 15.290125] usb 3-1: unregistering device > >> <7>[ 15.290131] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 15.290252] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 15.450059] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 16.540076] usb usb3: suspend_rh (auto-stop) > >> <7>[ 17.129214] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 17.129243] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 17.129267] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 17.280084] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 17.280134] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 17.280169] usb usb3: wakeup_rh (auto-start) > >> <7>[ 17.340094] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 17.340145] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 17.340161] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 17.340176] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 17.500073] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 17.620095] usb 3-1: new low speed USB device number 5 using uhci_hcd > >> <7>[ 17.778605] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 17.783618] usb 3-1: default language 0x0409 > >> <7>[ 17.802598] usb 3-1: udev 5, busnum 3, minor = 260 > >> <6>[ 17.802607] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 17.802614] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 17.802621] usb 3-1: Product: Tablet > >> <6>[ 17.802626] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 17.802631] usb 3-1: SerialNumber: V1.0 > >> <7>[ 17.802976] usb 3-1: usb_probe_device > >> <7>[ 17.802988] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 17.805621] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 17.805751] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 17.805761] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 17.805794] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 17.805802] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 17.811806] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 18.430089] uhci_hcd 0000:00:1d.0: reserve dev 4 ep81-INT, period 8, > >> phase 4, 93 us > >> <7>[ 18.481597] uhci_hcd 0000:00:1d.0: release dev 4 ep81-INT, period 8, > >> phase 4, 93 us > >> <7>[ 19.790083] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 19.790103] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 19.790125] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 19.790135] usb 3-1: USB disconnect, device number 5 > >> <7>[ 19.790142] usb 3-1: unregistering device > >> <7>[ 19.790150] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 19.790297] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 19.950120] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 21.040059] usb usb3: suspend_rh (auto-stop) > >> <7>[ 21.559195] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 21.559223] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 21.559244] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 21.710070] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 21.710103] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 21.710135] usb usb3: wakeup_rh (auto-start) > >> <7>[ 21.770062] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 21.770106] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 21.770120] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 21.770131] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 21.930056] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 22.050225] usb 3-1: new low speed USB device number 6 using uhci_hcd > >> <7>[ 22.212607] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 22.217629] usb 3-1: default language 0x0409 > >> <7>[ 22.236659] usb 3-1: udev 6, busnum 3, minor = 261 > >> <6>[ 22.236669] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 22.236677] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 22.236686] usb 3-1: Product: Tablet > >> <6>[ 22.236692] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 22.236698] usb 3-1: SerialNumber: V1.0 > >> <7>[ 22.237256] usb 3-1: usb_probe_device > >> <7>[ 22.237269] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 22.239643] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 22.239800] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 22.239810] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 22.239843] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 22.239851] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 22.245822] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 24.040133] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 24.040155] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 24.040178] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 24.040188] usb 3-1: USB disconnect, device number 6 > >> <7>[ 24.040195] usb 3-1: unregistering device > >> <7>[ 24.040202] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 24.040345] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 24.210093] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 25.290070] usb usb3: suspend_rh (auto-stop) > >> <6>[ 25.423101] request_suspend_state: wakeup (3->0) at 25423087269 > >> (2013-02-04 10:19:49.698278249 UTC) > >> <3>[ 25.520138] init: no such service 'hciattach' > >> <7>[ 25.522828] uhci_hcd 0000:00:1d.0: reserve dev 4 ep81-INT, period 8, > >> phase 4, 93 us > >> <7>[ 25.989185] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 25.989211] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 25.989235] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <6>[ 26.020806] ath9k 0000:01:00.0: PCI INT A disabled > >> <6>[ 26.020873] ath9k: Driver unloaded > >> <7>[ 26.150130] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 26.150161] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 26.150195] usb usb3: wakeup_rh (auto-start) > >> <7>[ 26.210071] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 26.210124] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 26.210142] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 26.210158] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 26.370105] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 26.490078] usb 3-1: new low speed USB device number 7 using uhci_hcd > >> <7>[ 26.648657] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 26.653637] usb 3-1: default language 0x0409 > >> <7>[ 26.679614] usb 3-1: udev 7, busnum 3, minor = 262 > >> <6>[ 26.679623] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 26.679630] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 26.679637] usb 3-1: Product: Tablet > >> <6>[ 26.679642] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 26.679648] usb 3-1: SerialNumber: V1.0 > >> <7>[ 26.679997] usb 3-1: usb_probe_device > >> <7>[ 26.680036] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 26.682678] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 26.682844] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 26.682855] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 26.682887] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 26.682895] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 26.688876] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <3>[ 26.920988] init: no such service 'hciattach' > >> <3>[ 28.323981] init: no such service 'hciattach' > >> <7>[ 28.540205] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 28.540267] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 28.540303] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 28.540318] usb 3-1: USB disconnect, device number 7 > >> <7>[ 28.540326] usb 3-1: unregistering device > >> <7>[ 28.540335] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 28.540604] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 28.702305] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <3>[ 29.725195] init: no such service 'hciattach' > >> <7>[ 29.790067] usb usb3: suspend_rh (auto-stop) > >> <7>[ 30.430113] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 30.430149] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 30.430172] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 30.590099] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 30.590149] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 30.590179] usb usb3: wakeup_rh (auto-start) > >> <7>[ 30.650096] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 30.650165] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 30.650182] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 30.650206] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 30.810075] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 30.930097] usb 3-1: new low speed USB device number 8 using uhci_hcd > >> <7>[ 31.098651] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 31.103656] usb 3-1: default language 0x0409 > >> <7>[ 31.122655] usb 3-1: udev 8, busnum 3, minor = 263 > >> <6>[ 31.122667] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 31.122677] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 31.122686] usb 3-1: Product: Tablet > >> <6>[ 31.122693] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 31.122701] usb 3-1: SerialNumber: V1.0 > >> <7>[ 31.123128] usb 3-1: usb_probe_device > >> <7>[ 31.123144] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 31.125675] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 31.125847] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 31.125857] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 31.125890] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 31.125898] usbhid 3-1:1.0: usb_probe_interface - got id > >> <3>[ 31.130569] init: no such service 'hciattach' > >> <7>[ 31.131830] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <3>[ 32.531267] init: no such service 'hciattach' > >> <4>[ 32.990393] hda-intel: Invalid position buffer, using LPIB read method > >> instead. > >> <7>[ 33.040167] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 33.040187] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 33.040211] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 33.040221] usb 3-1: USB disconnect, device number 8 > >> <7>[ 33.040228] usb 3-1: unregistering device > >> <7>[ 33.040236] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 33.040387] usb 3-1: usb_disable_device nuking all URBs > >> <4>[ 33.082917] hda-intel: IRQ timing workaround is activated for card #0. > >> Suggest a bigger bdl_pos_adj. > >> <7>[ 33.200083] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <3>[ 33.931951] init: no such service 'hciattach' > >> <7>[ 34.290079] usb usb3: suspend_rh (auto-stop) > >> <7>[ 34.869192] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 34.869217] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 34.869241] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 35.020077] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 35.020106] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 35.020141] usb usb3: wakeup_rh (auto-start) > >> <7>[ 35.081206] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 35.081285] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 35.081307] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 35.081327] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 35.240108] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <3>[ 35.332662] init: no such service 'hciattach' > >> <6>[ 35.360095] usb 3-1: new low speed USB device number 9 using uhci_hcd > >> <7>[ 35.518642] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 35.523639] usb 3-1: default language 0x0409 > >> <7>[ 35.541627] usb 3-1: udev 9, busnum 3, minor = 264 > >> <6>[ 35.541638] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 35.541647] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 35.541655] usb 3-1: Product: Tablet > >> <6>[ 35.541662] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 35.541669] usb 3-1: SerialNumber: V1.0 > >> <7>[ 35.542058] usb 3-1: usb_probe_device > >> <7>[ 35.542071] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 35.545110] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 35.545272] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 35.545282] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 35.545311] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 35.545319] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 35.550802] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <3>[ 36.733633] init: no such service 'hciattach' > >> <7>[ 37.290848] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 37.290871] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 37.290893] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 37.290903] usb 3-1: USB disconnect, device number 9 > >> <7>[ 37.290909] usb 3-1: unregistering device > >> <7>[ 37.290917] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 37.291086] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 37.450086] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <3>[ 38.137650] init: no such service 'hciattach' > >> <7>[ 38.540170] usb usb3: suspend_rh (auto-stop) > >> <7>[ 39.299185] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 39.299212] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 39.299235] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 39.450084] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 39.450116] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 39.450150] usb usb3: wakeup_rh (auto-start) > >> <7>[ 39.510124] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 39.510183] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 39.510202] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 39.510218] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <3>[ 39.538470] init: no such service 'hciattach' > >> <3>[ 39.538681] init: no such service 'hciattach' > >> <7>[ 39.670098] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 39.790127] usb 3-1: new low speed USB device number 10 using uhci_hcd > >> <7>[ 39.950176] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 39.960280] usb 3-1: default language 0x0409 > >> <7>[ 39.978673] usb 3-1: udev 10, busnum 3, minor = 265 > >> <6>[ 39.978684] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 39.978692] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 39.978700] usb 3-1: Product: Tablet > >> <6>[ 39.978707] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 39.978714] usb 3-1: SerialNumber: V1.0 > >> <7>[ 39.979292] usb 3-1: usb_probe_device > >> <7>[ 39.979306] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 39.980854] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 39.981030] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 39.981040] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 39.981082] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 39.981646] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 39.987836] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 41.790114] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 41.790134] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 41.790156] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 41.790166] usb 3-1: USB disconnect, device number 10 > >> <7>[ 41.790172] usb 3-1: unregistering device > >> <7>[ 41.790180] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 41.790349] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 41.950406] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 43.040076] usb usb3: suspend_rh (auto-stop) > >> <7>[ 43.730115] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 43.730143] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 43.730166] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 43.890084] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 43.890116] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 43.890151] usb usb3: wakeup_rh (auto-start) > >> <7>[ 43.950085] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 43.950142] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 43.950160] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 43.950177] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 44.110115] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 44.230123] usb 3-1: new low speed USB device number 11 using uhci_hcd > >> <7>[ 44.388619] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 44.393601] usb 3-1: default language 0x0409 > >> <7>[ 44.412608] usb 3-1: udev 11, busnum 3, minor = 266 > >> <6>[ 44.412615] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 44.412622] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 44.412628] usb 3-1: Product: Tablet > >> <6>[ 44.412633] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 44.412639] usb 3-1: SerialNumber: V1.0 > >> <7>[ 44.412975] usb 3-1: usb_probe_device > >> <7>[ 44.412987] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 44.415668] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 44.415811] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 44.415820] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 44.415854] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 44.415862] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 44.421830] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <6>[ 45.613122] ath9k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> > >> IRQ 16 > >> <7>[ 45.613148] ath9k 0000:01:00.0: setting latency timer to 64 > >> <7>[ 45.673562] ath: EEPROM regdomain: 0x60 > >> <7>[ 45.673574] ath: EEPROM indicates we should expect a direct regpair > >> map > >> <7>[ 45.673587] ath: Country alpha2 being used: 00 > >> <7>[ 45.673592] ath: Regpair used: 0x60 > >> <7>[ 45.678445] ieee80211 phy1: Selected rate control algorithm > >> 'ath9k_rate_control' > >> <7>[ 45.687436] Registered led device: ath9k-phy1 > >> <6>[ 45.687480] ieee80211 phy1: Atheros AR9285 Rev:2 mem=0xf8a00000, > >> irq=16 > >> <6>[ 45.812571] ADDRCONF(NETDEV_UP): wlan0: link is not ready > >> <7>[ 46.290102] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 46.290122] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 46.290144] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 46.290155] usb 3-1: USB disconnect, device number 11 > >> <7>[ 46.290162] usb 3-1: unregistering device > >> <7>[ 46.290169] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 46.290314] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 46.450051] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 47.540041] usb usb3: suspend_rh (auto-stop) > >> <7>[ 48.169156] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 48.169177] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 48.169194] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 48.320026] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 48.320047] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 48.320073] usb usb3: wakeup_rh (auto-start) > >> <7>[ 48.380032] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 48.380068] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 48.380079] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 48.380090] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 48.540049] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 48.660099] usb 3-1: new low speed USB device number 12 using uhci_hcd > >> <7>[ 48.818700] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 48.822631] usb 3-1: default language 0x0409 > >> <7>[ 48.841657] usb 3-1: udev 12, busnum 3, minor = 267 > >> <6>[ 48.841669] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 48.841677] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 48.841685] usb 3-1: Product: Tablet > >> <6>[ 48.841691] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 48.841698] usb 3-1: SerialNumber: V1.0 > >> <7>[ 48.842256] usb 3-1: usb_probe_device > >> <7>[ 48.842269] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 48.844822] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 48.844998] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 48.845007] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 48.845041] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 48.845047] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 48.853816] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 50.790070] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 50.790089] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 50.790107] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 50.790115] usb 3-1: USB disconnect, device number 12 > >> <7>[ 50.790120] usb 3-1: unregistering device > >> <7>[ 50.790126] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 50.790248] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 50.950035] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 50.993402] wlan0: authenticate with 00:3a:99:05:c9:21 (try 1) > >> <7>[ 51.190033] wlan0: authenticate with 00:3a:99:05:c9:21 (try 2) > >> <7>[ 51.198326] wlan0: authenticated > >> <7>[ 51.227116] wlan0: associate with 00:3a:99:05:c9:21 (try 1) > >> <7>[ 51.284511] wlan0: RX AssocResp from 00:3a:99:05:c9:21 (capab=0x401 > >> status=0 aid=58) > >> <7>[ 51.284522] wlan0: associated > >> <6>[ 51.285339] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > >> <7>[ 52.040047] usb usb3: suspend_rh (auto-stop) > >> <7>[ 52.599176] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 52.599197] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 52.599215] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 52.750027] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 52.750048] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 52.750072] usb usb3: wakeup_rh (auto-start) > >> <7>[ 52.810029] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 52.810068] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 52.810080] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 52.810091] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 52.972076] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 53.090118] usb 3-1: new low speed USB device number 13 using uhci_hcd > >> <7>[ 53.248648] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 53.253643] usb 3-1: default language 0x0409 > >> <7>[ 53.272672] usb 3-1: udev 13, busnum 3, minor = 268 > >> <6>[ 53.272683] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 53.272693] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 53.272701] usb 3-1: Product: Tablet > >> <6>[ 53.272708] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 53.272716] usb 3-1: SerialNumber: V1.0 > >> <7>[ 53.273116] usb 3-1: usb_probe_device > >> <7>[ 53.273131] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 53.275692] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 53.275869] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 53.275880] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 53.275914] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 53.275923] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 53.281838] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 55.040078] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 55.040094] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 55.040113] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 55.040120] usb 3-1: USB disconnect, device number 13 > >> <7>[ 55.040126] usb 3-1: unregistering device > >> <7>[ 55.040131] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 55.040249] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 55.200038] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 56.290064] usb usb3: suspend_rh (auto-stop) > >> <7>[ 57.029195] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 57.029222] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 57.029244] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 57.180090] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 57.180124] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 57.180156] usb usb3: wakeup_rh (auto-start) > >> <7>[ 57.240234] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 57.240284] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 57.240301] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 57.240316] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 57.400109] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 57.520048] usb 3-1: new low speed USB device number 14 using uhci_hcd > >> <7>[ 57.678629] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 57.683614] usb 3-1: default language 0x0409 > >> <7>[ 57.702618] usb 3-1: udev 14, busnum 3, minor = 269 > >> <6>[ 57.702625] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 57.702632] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 57.702639] usb 3-1: Product: Tablet > >> <6>[ 57.702644] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 57.702649] usb 3-1: SerialNumber: V1.0 > >> <7>[ 57.703000] usb 3-1: usb_probe_device > >> <7>[ 57.703013] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 57.705668] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 57.705812] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 57.705822] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 57.705857] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 57.705865] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 57.711761] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 57.711786] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 59.540060] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 59.540077] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 59.540095] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 59.540103] usb 3-1: USB disconnect, device number 14 > >> <7>[ 59.540108] usb 3-1: unregistering device > >> <7>[ 59.540114] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 59.540232] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 59.700078] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 60.790148] usb usb3: suspend_rh (auto-stop) > >> <7>[ 61.460800] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 61.460837] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 61.460861] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 61.620083] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 61.620113] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 61.620144] usb usb3: wakeup_rh (auto-start) > >> <7>[ 61.680100] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 61.680150] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 61.680166] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 61.680181] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 61.790034] wlan0: no IPv6 routers present > >> <7>[ 61.840085] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 61.960087] usb 3-1: new low speed USB device number 15 using uhci_hcd > >> <7>[ 62.118632] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 62.123630] usb 3-1: default language 0x0409 > >> <7>[ 62.142635] usb 3-1: udev 15, busnum 3, minor = 270 > >> <6>[ 62.142646] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 62.142655] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 62.142664] usb 3-1: Product: Tablet > >> <6>[ 62.142671] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 62.142678] usb 3-1: SerialNumber: V1.0 > >> <7>[ 62.143098] usb 3-1: usb_probe_device > >> <7>[ 62.143110] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 62.145671] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 62.145840] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 62.145849] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 62.145886] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 62.145893] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 62.151891] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 64.040542] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 64.040563] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 64.040585] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 64.040595] usb 3-1: USB disconnect, device number 15 > >> <7>[ 64.040601] usb 3-1: unregistering device > >> <7>[ 64.040609] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 64.040779] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 64.200055] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 65.290084] usb usb3: suspend_rh (auto-stop) > >> <7>[ 65.902138] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 65.902161] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 65.902179] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 66.060034] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 66.060059] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 66.060086] usb usb3: wakeup_rh (auto-start) > >> <7>[ 66.120028] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 66.120064] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 66.120076] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 66.120087] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 66.280115] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 66.400124] usb 3-1: new low speed USB device number 16 using uhci_hcd > >> <7>[ 66.558640] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 66.563617] usb 3-1: default language 0x0409 > >> <7>[ 66.582625] usb 3-1: udev 16, busnum 3, minor = 271 > >> <6>[ 66.582633] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 66.582640] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 66.582647] usb 3-1: Product: Tablet > >> <6>[ 66.582652] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 66.582657] usb 3-1: SerialNumber: V1.0 > >> <7>[ 66.582993] usb 3-1: usb_probe_device > >> <7>[ 66.583004] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 66.585656] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 66.585780] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 66.585790] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 66.585823] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 66.585832] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 66.591755] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 68.540063] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 68.540080] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 68.540098] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 68.540106] usb 3-1: USB disconnect, device number 16 > >> <7>[ 68.540111] usb 3-1: unregistering device > >> <7>[ 68.540117] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 68.540233] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 68.700031] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 69.790038] usb usb3: suspend_rh (auto-stop) > >> <7>[ 70.339196] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 70.339216] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 70.339233] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 70.490030] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 70.490054] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 70.490081] usb usb3: wakeup_rh (auto-start) > >> <7>[ 70.550028] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 70.550064] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 70.550075] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 70.550086] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 70.710029] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 70.830033] usb 3-1: new low speed USB device number 17 using uhci_hcd > >> <7>[ 70.988628] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 70.993623] usb 3-1: default language 0x0409 > >> <7>[ 71.012626] usb 3-1: udev 17, busnum 3, minor = 272 > >> <6>[ 71.012633] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 71.012639] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 71.012645] usb 3-1: Product: Tablet > >> <6>[ 71.012651] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 71.012656] usb 3-1: SerialNumber: V1.0 > >> <7>[ 71.013001] usb 3-1: usb_probe_device > >> <7>[ 71.013013] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 71.015659] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 71.015815] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 71.015824] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 71.015858] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 71.015866] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 71.021799] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 72.790064] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 72.790082] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 72.790099] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 72.790107] usb 3-1: USB disconnect, device number 17 > >> <7>[ 72.790112] usb 3-1: unregistering device > >> <7>[ 72.790118] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 72.790237] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 72.950035] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 74.040041] usb usb3: suspend_rh (auto-stop) > >> <7>[ 74.769116] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 74.769137] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 74.769153] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 74.920027] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 74.920047] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 74.920071] usb usb3: wakeup_rh (auto-start) > >> <7>[ 74.980026] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 74.980061] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 74.980072] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 74.980084] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 75.140026] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 75.260024] usb 3-1: new low speed USB device number 18 using uhci_hcd > >> <7>[ 75.418635] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 75.423627] usb 3-1: default language 0x0409 > >> <7>[ 75.442628] usb 3-1: udev 18, busnum 3, minor = 273 > >> <6>[ 75.442635] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 75.442642] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 75.442648] usb 3-1: Product: Tablet > >> <6>[ 75.442653] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 75.442659] usb 3-1: SerialNumber: V1.0 > >> <7>[ 75.442998] usb 3-1: usb_probe_device > >> <7>[ 75.443010] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 75.445690] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 75.445834] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 75.445844] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 75.445878] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 75.445886] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 75.451815] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 75.451845] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 77.290061] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 77.290079] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 77.290097] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 77.290105] usb 3-1: USB disconnect, device number 18 > >> <7>[ 77.290110] usb 3-1: unregistering device > >> <7>[ 77.290116] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 77.290233] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 77.450031] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 78.540041] usb usb3: suspend_rh (auto-stop) > >> <7>[ 79.199142] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 79.199165] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 79.199182] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 79.350066] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 79.350098] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 79.350128] usb usb3: wakeup_rh (auto-start) > >> <7>[ 79.410084] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 79.410137] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 79.410153] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 79.410168] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 79.570105] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 79.690139] usb 3-1: new low speed USB device number 19 using uhci_hcd > >> <7>[ 79.848650] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 79.853627] usb 3-1: default language 0x0409 > >> <7>[ 79.872629] usb 3-1: udev 19, busnum 3, minor = 274 > >> <6>[ 79.872636] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 79.872642] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 79.872649] usb 3-1: Product: Tablet > >> <6>[ 79.872654] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 79.872659] usb 3-1: SerialNumber: V1.0 > >> <7>[ 79.872992] usb 3-1: usb_probe_device > >> <7>[ 79.873004] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 79.875669] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 79.875794] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 79.875804] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 79.875836] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 79.875844] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 79.881765] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 81.790063] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 81.790080] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 81.790098] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 81.790106] usb 3-1: USB disconnect, device number 19 > >> <7>[ 81.790111] usb 3-1: unregistering device > >> <7>[ 81.790117] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 81.790234] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 81.950050] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 83.040103] usb usb3: suspend_rh (auto-stop) > >> <7>[ 83.629209] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 83.629235] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 83.629257] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 83.780072] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 83.780106] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 83.780146] usb usb3: wakeup_rh (auto-start) > >> <7>[ 83.840098] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 83.840150] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 83.840166] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 83.840181] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 84.002678] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 84.120113] usb 3-1: new low speed USB device number 20 using uhci_hcd > >> <7>[ 84.278643] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 84.283630] usb 3-1: default language 0x0409 > >> <7>[ 84.302633] usb 3-1: udev 20, busnum 3, minor = 275 > >> <6>[ 84.302641] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 84.302648] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 84.302654] usb 3-1: Product: Tablet > >> <6>[ 84.302659] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 84.302665] usb 3-1: SerialNumber: V1.0 > >> <7>[ 84.303004] usb 3-1: usb_probe_device > >> <7>[ 84.303016] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 84.305670] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 84.305795] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 84.305804] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 84.305837] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 84.305846] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 84.311768] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 86.290061] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 86.290079] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 86.290098] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 86.290105] usb 3-1: USB disconnect, device number 20 > >> <7>[ 86.290111] usb 3-1: unregistering device > >> <7>[ 86.290116] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 86.290239] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 86.450034] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 87.540030] usb usb3: suspend_rh (auto-stop) > >> <7>[ 88.059156] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 88.059177] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 88.059194] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 88.210026] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 88.210046] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 88.210072] usb usb3: wakeup_rh (auto-start) > >> <7>[ 88.270029] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 88.270064] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 88.270075] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 88.270086] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 88.430052] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 88.550029] usb 3-1: new low speed USB device number 21 using uhci_hcd > >> <7>[ 88.708642] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 88.713635] usb 3-1: default language 0x0409 > >> <7>[ 88.732637] usb 3-1: udev 21, busnum 3, minor = 276 > >> <6>[ 88.732644] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 88.732651] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 88.732657] usb 3-1: Product: Tablet > >> <6>[ 88.732662] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 88.732667] usb 3-1: SerialNumber: V1.0 > >> <7>[ 88.733004] usb 3-1: usb_probe_device > >> <7>[ 88.733016] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 88.735672] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 88.735797] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 88.735807] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 88.735841] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 88.735849] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 88.741771] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 90.540125] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 90.540147] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 90.540169] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 90.540180] usb 3-1: USB disconnect, device number 21 > >> <7>[ 90.540186] usb 3-1: unregistering device > >> <7>[ 90.540194] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 90.540369] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 90.700036] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 91.790082] usb usb3: suspend_rh (auto-stop) > >> <7>[ 92.489133] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 92.489154] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 92.489171] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 92.640026] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 92.640045] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 92.640071] usb usb3: wakeup_rh (auto-start) > >> <7>[ 92.700030] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 92.700067] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 92.700078] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 92.700089] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 92.860037] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 92.980028] usb 3-1: new low speed USB device number 22 using uhci_hcd > >> <7>[ 93.138644] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 93.143638] usb 3-1: default language 0x0409 > >> <7>[ 93.162640] usb 3-1: udev 22, busnum 3, minor = 277 > >> <6>[ 93.162647] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 93.162654] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 93.162660] usb 3-1: Product: Tablet > >> <6>[ 93.162665] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 93.162671] usb 3-1: SerialNumber: V1.0 > >> <7>[ 93.163008] usb 3-1: usb_probe_device > >> <7>[ 93.163020] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 93.165676] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 93.165801] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 93.165811] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 93.165844] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 93.165852] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 93.171823] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 95.040060] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 95.040077] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 95.040095] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 95.040103] usb 3-1: USB disconnect, device number 22 > >> <7>[ 95.040108] usb 3-1: unregistering device > >> <7>[ 95.040114] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 95.040234] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 95.200039] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 96.290085] usb usb3: suspend_rh (auto-stop) > >> <7>[ 96.919127] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 96.919148] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 96.919165] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 97.070103] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 97.070138] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 97.070187] usb usb3: wakeup_rh (auto-start) > >> <7>[ 97.130050] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 97.130106] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 97.130122] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 97.130133] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 97.290082] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 97.410074] usb 3-1: new low speed USB device number 23 using uhci_hcd > >> <7>[ 97.568692] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 97.573647] usb 3-1: default language 0x0409 > >> <7>[ 97.592664] usb 3-1: udev 23, busnum 3, minor = 278 > >> <6>[ 97.592675] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 97.592684] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 97.592693] usb 3-1: Product: Tablet > >> <6>[ 97.592700] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 97.592708] usb 3-1: SerialNumber: V1.0 > >> <7>[ 97.593133] usb 3-1: usb_probe_device > >> <7>[ 97.593145] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 97.595742] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 97.595913] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 97.595923] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 97.595956] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 97.595963] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 97.601838] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 99.540198] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 99.540219] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 99.540240] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 99.540251] usb 3-1: USB disconnect, device number 23 > >> <7>[ 99.540257] usb 3-1: unregistering device > >> <7>[ 99.540265] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 99.540427] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 99.700100] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 100.790064] usb usb3: suspend_rh (auto-stop) > >> <7>[ 101.349177] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 101.349203] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 101.349224] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 101.500098] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 101.500135] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 101.500176] usb usb3: wakeup_rh (auto-start) > >> <7>[ 101.560115] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 101.560167] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 101.560183] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 101.560197] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 101.720085] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 101.840172] usb 3-1: new low speed USB device number 24 using uhci_hcd > >> <7>[ 101.998681] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 102.003648] usb 3-1: default language 0x0409 > >> <7>[ 102.022663] usb 3-1: udev 24, busnum 3, minor = 279 > >> <6>[ 102.022673] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 102.022683] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 102.022691] usb 3-1: Product: Tablet > >> <6>[ 102.022698] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 102.022706] usb 3-1: SerialNumber: V1.0 > >> <7>[ 102.023083] usb 3-1: usb_probe_device > >> <7>[ 102.023095] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 102.025743] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 102.025914] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 102.025923] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 102.025955] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 102.025962] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 102.030844] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 103.790077] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 103.790094] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 103.790112] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 103.790120] usb 3-1: USB disconnect, device number 24 > >> <7>[ 103.790125] usb 3-1: unregistering device > >> <7>[ 103.790131] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 103.790249] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 103.950096] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 105.040104] usb usb3: suspend_rh (auto-stop) > >> <7>[ 105.779302] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 105.779345] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 105.779376] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 105.930093] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 105.930125] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 105.930167] usb usb3: wakeup_rh (auto-start) > >> <7>[ 105.990049] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 105.990093] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 105.990107] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 105.990118] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 106.150118] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 106.270056] usb 3-1: new low speed USB device number 25 using uhci_hcd > >> <7>[ 106.460114] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 106.464691] usb 3-1: default language 0x0409 > >> <7>[ 106.483705] usb 3-1: udev 25, busnum 3, minor = 280 > >> <6>[ 106.483717] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 106.483726] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 106.483735] usb 3-1: Product: Tablet > >> <6>[ 106.483742] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 106.483749] usb 3-1: SerialNumber: V1.0 > >> <7>[ 106.484147] usb 3-1: usb_probe_device > >> <7>[ 106.484161] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 106.487295] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 106.487467] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 106.487476] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 106.487507] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 106.487514] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 106.492974] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 106.493000] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 108.290062] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 108.290079] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 108.290097] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 108.290105] usb 3-1: USB disconnect, device number 25 > >> <7>[ 108.290111] usb 3-1: unregistering device > >> <7>[ 108.290116] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 108.290241] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 108.450052] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 109.540055] usb usb3: suspend_rh (auto-stop) > >> <7>[ 110.220108] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 110.220139] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 110.220160] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 110.380128] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 110.380162] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 110.380191] usb usb3: wakeup_rh (auto-start) > >> <7>[ 110.440087] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 110.440140] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 110.440156] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 110.440170] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 110.603012] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 110.720099] usb 3-1: new low speed USB device number 26 using uhci_hcd > >> <7>[ 110.878672] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 110.883653] usb 3-1: default language 0x0409 > >> <7>[ 110.902668] usb 3-1: udev 26, busnum 3, minor = 281 > >> <6>[ 110.902678] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 110.902688] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 110.902697] usb 3-1: Product: Tablet > >> <6>[ 110.902703] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 110.902711] usb 3-1: SerialNumber: V1.0 > >> <7>[ 110.903096] usb 3-1: usb_probe_device > >> <7>[ 110.903108] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 110.907720] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 110.907890] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 110.907900] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 110.907931] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 110.907939] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 110.913850] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 112.790088] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 112.790109] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 112.790132] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 112.790142] usb 3-1: USB disconnect, device number 26 > >> <7>[ 112.790149] usb 3-1: unregistering device > >> <7>[ 112.790157] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 112.790296] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 112.950083] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 114.040092] usb usb3: suspend_rh (auto-stop) > >> <7>[ 114.659659] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 114.659689] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 114.659789] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 114.810085] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 114.810118] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 114.810158] usb usb3: wakeup_rh (auto-start) > >> <7>[ 114.870079] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 114.870133] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 114.870148] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 114.870163] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 115.030086] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 115.150114] usb 3-1: new low speed USB device number 27 using uhci_hcd > >> <7>[ 115.308704] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 115.313711] usb 3-1: default language 0x0409 > >> <7>[ 115.332666] usb 3-1: udev 27, busnum 3, minor = 282 > >> <6>[ 115.332674] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 115.332682] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 115.332688] usb 3-1: Product: Tablet > >> <6>[ 115.332693] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 115.332699] usb 3-1: SerialNumber: V1.0 > >> <7>[ 115.333033] usb 3-1: usb_probe_device > >> <7>[ 115.333045] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 115.335753] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 115.335921] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 115.335931] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 115.335965] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 115.335974] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 115.341895] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 117.290081] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 117.290103] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 117.290124] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 117.290135] usb 3-1: USB disconnect, device number 27 > >> <7>[ 117.290142] usb 3-1: unregistering device > >> <7>[ 117.290149] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 117.290320] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 117.450108] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 118.540066] usb usb3: suspend_rh (auto-stop) > >> <7>[ 119.089220] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 119.089249] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 119.089270] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 119.240082] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 119.240112] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 119.240144] usb usb3: wakeup_rh (auto-start) > >> <7>[ 119.300098] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 119.300151] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 119.300167] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 119.300182] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 119.460085] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 119.580091] usb 3-1: new low speed USB device number 28 using uhci_hcd > >> <7>[ 119.738707] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 119.743679] usb 3-1: default language 0x0409 > >> <7>[ 119.762691] usb 3-1: udev 28, busnum 3, minor = 283 > >> <6>[ 119.762702] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 119.762711] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 119.762720] usb 3-1: Product: Tablet > >> <6>[ 119.762727] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 119.762735] usb 3-1: SerialNumber: V1.0 > >> <7>[ 119.763189] usb 3-1: usb_probe_device > >> <7>[ 119.763203] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 119.766233] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 119.766411] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 119.766422] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 119.766455] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 119.766464] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 119.777063] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 121.540262] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 121.540283] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 121.540304] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 121.540315] usb 3-1: USB disconnect, device number 28 > >> <7>[ 121.540322] usb 3-1: unregistering device > >> <7>[ 121.540330] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 121.540478] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 121.700095] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 122.790076] usb usb3: suspend_rh (auto-stop) > >> <7>[ 123.519277] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 123.519318] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 123.519346] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 123.670082] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 123.670114] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 123.670142] usb usb3: wakeup_rh (auto-start) > >> <7>[ 123.730071] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 123.730125] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 123.730142] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 123.730159] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 123.890071] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 124.010076] usb 3-1: new low speed USB device number 29 using uhci_hcd > >> <7>[ 124.168698] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 124.173712] usb 3-1: default language 0x0409 > >> <7>[ 124.192716] usb 3-1: udev 29, busnum 3, minor = 284 > >> <6>[ 124.192727] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 124.192737] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 124.192745] usb 3-1: Product: Tablet > >> <6>[ 124.192752] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 124.192760] usb 3-1: SerialNumber: V1.0 > >> <7>[ 124.193167] usb 3-1: usb_probe_device > >> <7>[ 124.193180] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 124.195744] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 124.195911] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 124.195920] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 124.195952] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 124.195960] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 124.201899] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 124.201922] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 126.040236] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 126.040255] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 126.040276] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 126.040286] usb 3-1: USB disconnect, device number 29 > >> <7>[ 126.040293] usb 3-1: unregistering device > >> <7>[ 126.040301] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 126.040454] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 126.200046] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 127.290043] usb usb3: suspend_rh (auto-stop) > >> <7>[ 127.949144] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 127.949171] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 127.949195] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 128.100030] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 128.100053] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 128.100080] usb usb3: wakeup_rh (auto-start) > >> <7>[ 128.160029] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 128.160065] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 128.160076] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 128.160087] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 128.320163] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 128.440089] usb 3-1: new low speed USB device number 30 using uhci_hcd > >> <7>[ 128.598682] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 128.603665] usb 3-1: default language 0x0409 > >> <7>[ 128.622707] usb 3-1: udev 30, busnum 3, minor = 285 > >> <6>[ 128.622718] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 128.622727] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 128.622736] usb 3-1: Product: Tablet > >> <6>[ 128.622742] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 128.622750] usb 3-1: SerialNumber: V1.0 > >> <7>[ 128.623142] usb 3-1: usb_probe_device > >> <7>[ 128.623155] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 128.625736] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 128.625897] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 128.625906] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 128.625937] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 128.625945] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 128.631152] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 130.540107] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 130.540128] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 130.540150] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 130.540160] usb 3-1: USB disconnect, device number 30 > >> <7>[ 130.540167] usb 3-1: unregistering device > >> <7>[ 130.540175] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 130.540346] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 130.700048] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 131.790083] usb usb3: suspend_rh (auto-stop) > >> <7>[ 132.379213] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 132.379241] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 132.379263] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 132.530093] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 132.530125] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 132.530171] usb usb3: wakeup_rh (auto-start) > >> <7>[ 132.590105] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 132.590158] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 132.590175] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 132.590190] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 132.750082] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 132.870075] usb 3-1: new low speed USB device number 31 using uhci_hcd > >> <7>[ 133.028857] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 133.033711] usb 3-1: default language 0x0409 > >> <7>[ 133.051825] usb 3-1: udev 31, busnum 3, minor = 286 > >> <6>[ 133.051838] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 133.051848] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 133.051857] usb 3-1: Product: Tablet > >> <6>[ 133.051864] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 133.051871] usb 3-1: SerialNumber: V1.0 > >> <7>[ 133.052600] usb 3-1: usb_probe_device > >> <7>[ 133.052616] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 133.054818] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 133.055028] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 133.055039] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 133.055075] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 133.055083] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 133.061010] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 135.040066] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 135.040086] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 135.040109] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 135.040119] usb 3-1: USB disconnect, device number 31 > >> <7>[ 135.040126] usb 3-1: unregistering device > >> <7>[ 135.040134] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 135.040281] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 135.200072] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 136.290067] usb usb3: suspend_rh (auto-stop) > >> <7>[ 136.809246] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 136.809275] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 136.809297] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 136.960128] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 136.960161] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 136.960201] usb usb3: wakeup_rh (auto-start) > >> <7>[ 137.020144] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 137.020203] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 137.020220] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 137.020233] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 137.180061] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 137.300081] usb 3-1: new low speed USB device number 32 using uhci_hcd > >> <7>[ 137.458744] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 137.463703] usb 3-1: default language 0x0409 > >> <7>[ 137.483633] usb 3-1: udev 32, busnum 3, minor = 287 > >> <6>[ 137.483645] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 137.483654] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 137.483663] usb 3-1: Product: Tablet > >> <6>[ 137.483670] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 137.483678] usb 3-1: SerialNumber: V1.0 > >> <7>[ 137.484056] usb 3-1: usb_probe_device > >> <7>[ 137.484069] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 137.486753] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 137.486922] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 137.486932] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 137.486963] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 137.486970] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 137.492883] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 139.290052] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 139.290069] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 139.290088] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 139.290096] usb 3-1: USB disconnect, device number 32 > >> <7>[ 139.290101] usb 3-1: unregistering device > >> <7>[ 139.290107] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 139.290227] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 139.450765] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 140.540033] usb usb3: suspend_rh (auto-stop) > >> <7>[ 141.239192] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 141.239213] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 141.239231] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 141.390049] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 141.390073] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 141.390101] usb usb3: wakeup_rh (auto-start) > >> <7>[ 141.450044] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 141.450090] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 141.450103] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 141.450114] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 141.610033] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 141.730033] usb 3-1: new low speed USB device number 33 using uhci_hcd > >> <7>[ 141.888680] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 141.893709] usb 3-1: default language 0x0409 > >> <7>[ 141.912738] usb 3-1: udev 33, busnum 3, minor = 288 > >> <6>[ 141.912749] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 141.912759] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 141.912768] usb 3-1: Product: Tablet > >> <6>[ 141.912775] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 141.912782] usb 3-1: SerialNumber: V1.0 > >> <7>[ 141.913252] usb 3-1: usb_probe_device > >> <7>[ 141.913267] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 141.915741] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 141.915911] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 141.915921] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 141.915952] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 141.915959] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 141.921931] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 143.790066] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 143.790083] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 143.790101] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 143.790109] usb 3-1: USB disconnect, device number 33 > >> <7>[ 143.790114] usb 3-1: unregistering device > >> <7>[ 143.790120] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 143.790238] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 143.950034] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 145.040127] usb usb3: suspend_rh (auto-stop) > >> <7>[ 145.669138] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 145.669158] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 145.669176] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 145.820071] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 145.820095] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 145.820119] usb usb3: wakeup_rh (auto-start) > >> <7>[ 145.880126] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 145.880187] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 145.880203] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 145.880217] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 146.040056] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 146.160082] usb 3-1: new low speed USB device number 34 using uhci_hcd > >> <7>[ 146.318689] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 146.323678] usb 3-1: default language 0x0409 > >> <7>[ 146.342681] usb 3-1: udev 34, busnum 3, minor = 289 > >> <6>[ 146.342689] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 146.342696] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 146.342702] usb 3-1: Product: Tablet > >> <6>[ 146.342707] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 146.342712] usb 3-1: SerialNumber: V1.0 > >> <7>[ 146.343059] usb 3-1: usb_probe_device > >> <7>[ 146.343072] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 146.345723] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 146.345856] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 146.345866] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 146.345898] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 146.345906] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 146.351864] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 148.290075] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 148.290092] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 148.290110] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 148.290118] usb 3-1: USB disconnect, device number 34 > >> <7>[ 148.290123] usb 3-1: unregistering device > >> <7>[ 148.290129] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 148.290252] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 148.450036] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 149.540044] usb usb3: suspend_rh (auto-stop) > >> <7>[ 150.099130] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 150.099150] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 150.099167] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 150.250038] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 150.250062] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 150.250088] usb usb3: wakeup_rh (auto-start) > >> <7>[ 150.310027] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 150.310063] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 150.310075] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 150.310086] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 150.470043] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 150.590030] usb 3-1: new low speed USB device number 35 using uhci_hcd > >> <7>[ 150.748687] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 150.753680] usb 3-1: default language 0x0409 > >> <7>[ 150.772682] usb 3-1: udev 35, busnum 3, minor = 290 > >> <6>[ 150.772689] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 150.772696] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 150.772702] usb 3-1: Product: Tablet > >> <6>[ 150.772707] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 150.772713] usb 3-1: SerialNumber: V1.0 > >> <7>[ 150.773055] usb 3-1: usb_probe_device > >> <7>[ 150.773067] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 150.775720] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 150.775845] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 150.775855] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 150.775889] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 150.775897] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 150.781818] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> > >> > >> <7>[ 143.790101] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 143.790109] usb 3-1: USB disconnect, device number 33 > >> <7>[ 143.790114] usb 3-1: unregistering device > >> <7>[ 143.790120] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 143.790238] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 143.950034] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 145.040127] usb usb3: suspend_rh (auto-stop) > >> <7>[ 145.669138] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 145.669158] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 145.669176] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 145.820071] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 145.820095] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 145.820119] usb usb3: wakeup_rh (auto-start) > >> <7>[ 145.880126] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 145.880187] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 145.880203] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 145.880217] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 146.040056] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 146.160082] usb 3-1: new low speed USB device number 34 using uhci_hcd > >> <7>[ 146.318689] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 146.323678] usb 3-1: default language 0x0409 > >> <7>[ 146.342681] usb 3-1: udev 34, busnum 3, minor = 289 > >> <6>[ 146.342689] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 146.342696] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 146.342702] usb 3-1: Product: Tablet > >> <6>[ 146.342707] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 146.342712] usb 3-1: SerialNumber: V1.0 > >> <7>[ 146.343059] usb 3-1: usb_probe_device > >> <7>[ 146.343072] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 146.345723] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 146.345856] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 146.345866] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 146.345898] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 146.345906] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 146.351864] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 148.290075] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 148.290092] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 > >> <7>[ 148.290110] hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s > >> <6>[ 148.290118] usb 3-1: USB disconnect, device number 34 > >> <7>[ 148.290123] usb 3-1: unregistering device > >> <7>[ 148.290129] usb 3-1: unregistering interface 3-1:1.0 > >> <7>[ 148.290252] usb 3-1: usb_disable_device nuking all URBs > >> <7>[ 148.450036] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x100 > >> <7>[ 149.540044] usb usb3: suspend_rh (auto-stop) > >> <7>[ 150.099130] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> <7>[ 150.099150] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001403 0 > >> ACK POWER sig=k CSC CONNECT > >> <7>[ 150.099167] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > >> <7>[ 150.250038] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms > >> status 0x501 > >> <7>[ 150.250062] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion > >> <7>[ 150.250088] usb usb3: wakeup_rh (auto-start) > >> <7>[ 150.310027] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0 > >> ACK POWER OWNER sig=se0 CSC > >> <7>[ 150.310063] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 > >> <7>[ 150.310075] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 > >> <7>[ 150.310086] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > >> <7>[ 150.470043] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms > >> status 0x301 > >> <6>[ 150.590030] usb 3-1: new low speed USB device number 35 using uhci_hcd > >> <7>[ 150.748687] usb 3-1: skipped 1 descriptor after interface > >> <7>[ 150.753680] usb 3-1: default language 0x0409 > >> <7>[ 150.772682] usb 3-1: udev 35, busnum 3, minor = 290 > >> <6>[ 150.772689] usb 3-1: New USB device found, idVendor=0b57, > >> idProduct=8408 > >> <6>[ 150.772696] usb 3-1: New USB device strings: Mfr=1, Product=2, > >> SerialNumber=3 > >> <6>[ 150.772702] usb 3-1: Product: Tablet > >> <6>[ 150.772707] usb 3-1: Manufacturer: 汉王科技股份有限公司 > >> <6>[ 150.772713] usb 3-1: SerialNumber: V1.0 > >> <7>[ 150.773055] usb 3-1: usb_probe_device > >> <7>[ 150.773067] usb 3-1: configuration #1 chosen from 1 choice > >> <7>[ 150.775720] usb 3-1: adding 3-1:1.0 (config #1, interface 0) > >> <7>[ 150.775845] hanwang 3-1:1.0: usb_probe_interface > >> <7>[ 150.775855] hanwang 3-1:1.0: usb_probe_interface - got id > >> <7>[ 150.775889] usbhid 3-1:1.0: usb_probe_interface > >> <7>[ 150.775897] usbhid 3-1:1.0: usb_probe_interface - got id > >> <7>[ 150.781818] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 > >> -- > >> To unsubscribe from this list: send the line "unsubscribe linux-usb" in > >> the body of a message to majordomo@xxxxxxxxxxxxxxx > >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
