This patch (as1661) fixes a rather obscure bug in ehci-hcd. In a couple of places, the driver compares the DMA address stored in a QH's overlay region with the address of a particular qTD, in order to see whether that qTD is the one currently being processed by the hardware. (If it is then the status in the QH's overlay region is more up-to-date than the status in the qTD, and if it isn't then the overlay's value needs to be adjusted when the QH is added back to the active schedule.) However, DMA address in the overlay region isn't always valid. It sometimes will contain a stale value, which may happen by coincidence to be equal to a qTD's DMA address. Instead of checking the DMA address, we should check whether the overlay region is active and valid. The patch tests the ACTIVE bit in the overlay, and clears this bit when the overlay becomes invalid (which happens when the currently-executing URB is unlinked). This is the second part of a fix for the regression reported at: https://bugs.launchpad.net/bugs/1088733 Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> Reported-by: Joseph Salisbury <joseph.salisbury@xxxxxxxxxxxxx> Reported-and-tested-by: Stephen Thirlwall <sdt@xxxxxx> CC: <stable@xxxxxxxxxxxxxxx> --- drivers/usb/host/ehci-q.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) Index: usb-3.8/drivers/usb/host/ehci-q.c =================================================================== --- usb-3.8.orig/drivers/usb/host/ehci-q.c +++ usb-3.8/drivers/usb/host/ehci-q.c @@ -135,7 +135,7 @@ qh_refresh (struct ehci_hcd *ehci, struc * qtd is updated in qh_completions(). Update the QH * overlay here. */ - if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) { + if (qh->hw->hw_token & ACTIVE_BIT(ehci)) { qh->hw->hw_qtd_next = qtd->hw_next; qtd = NULL; } @@ -449,11 +449,19 @@ qh_completions (struct ehci_hcd *ehci, s else if (last_status == -EINPROGRESS && !urb->unlinked) continue; - /* qh unlinked; token in overlay may be most current */ - if (state == QH_STATE_IDLE - && cpu_to_hc32(ehci, qtd->qtd_dma) - == hw->hw_current) { + /* + * If this was the active qtd when the qh was unlinked + * and the overlay's token is active, then the overlay + * hasn't been written back to the qtd yet so use its + * token instead of the qtd's. After the qtd is + * processed and removed, the overlay won't be valid + * any more. + */ + if (state == QH_STATE_IDLE && + qh->qtd_list.next == &qtd->qtd_list && + (hw->hw_token & ACTIVE_BIT(ehci))) { token = hc32_to_cpu(ehci, hw->hw_token); + hw->hw_token &= ~ACTIVE_BIT(ehci); /* An unlink may leave an incomplete * async transaction in the TT buffer. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
