The main design flow is the same with msm otg driver, that is the id and
vbus interrupt are handled at core driver, others are handled by
individual drivers.
- At former design, when switch usb role from device->host, it will call
udc_stop, it will remove the gadget driver, so when switch role
from host->device, it can't add gadget driver any more.
At new design, when role switch occurs, the gadget just calls
usb_gadget_vbus_disconnect/usb_gadget_vbus_connect as well as
reset controller, it will not free any device/gadget structure
- Add vbus connect and disconnect to core interrupt handler, it can
notify udc driver by calling usb_gadget_vbus_disconnect
/usb_gadget_vbus_connect.
- vbus interrupt needs to be handled when gadget function is enabled
- Create/destroy the gadget at udc's init and destory function
- start/stop API are used at otg id switch and probe routine
- Defer some gadget operations at ci's delayed work queue
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
---
drivers/usb/chipidea/bits.h | 10 ++
drivers/usb/chipidea/ci.h | 7 +-
drivers/usb/chipidea/ci13xxx_imx.c | 3 +-
drivers/usb/chipidea/core.c | 190 ++++++++++++++++++++++++++++++++----
drivers/usb/chipidea/host.c | 6 +
drivers/usb/chipidea/host.h | 6 +-
drivers/usb/chipidea/otg.c | 28 ++++--
drivers/usb/chipidea/otg.h | 3 +
drivers/usb/chipidea/udc.c | 39 ++++++--
drivers/usb/chipidea/udc.h | 4 +
10 files changed, 254 insertions(+), 42 deletions(-)
diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index d8ffc2f..58ef56c 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -77,11 +77,21 @@
#define OTGSC_ASVIS BIT(18)
#define OTGSC_BSVIS BIT(19)
#define OTGSC_BSEIS BIT(20)
+#define OTGSC_1MSIS BIT(21)
+#define OTGSC_DPIS BIT(22)
#define OTGSC_IDIE BIT(24)
#define OTGSC_AVVIE BIT(25)
#define OTGSC_ASVIE BIT(26)
#define OTGSC_BSVIE BIT(27)
#define OTGSC_BSEIE BIT(28)
+#define OTGSC_1MSIE BIT(29)
+#define OTGSC_DPIE BIT(30)
+#define OTGSC_INT_EN_BITS (OTGSC_IDIE | OTGSC_AVVIE | OTGSC_ASVIE \
+ | OTGSC_BSVIE | OTGSC_BSEIE | OTGSC_1MSIE \
+ | OTGSC_DPIE)
+#define OTGSC_INT_STATUS_BITS (OTGSC_IDIS | OTGSC_AVVIS | OTGSC_ASVIS \
+ | OTGSC_BSVIS | OTGSC_BSEIS | OTGSC_1MSIS \
+ | OTGSC_DPIS)
/* USBMODE */
#define USBMODE_CM (0x03UL << 0)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 697e369..a3777a1 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -130,6 +130,9 @@ struct hw_bank {
* @transceiver: pointer to USB PHY, if any
* @hcd: pointer to usb_hcd for ehci host driver
* @otg: for otg support
+ * @id_event: indicates there is a id event, and handled at ci_otg_work
+ * @b_sess_valid_event: indicates there is a vbus event, and handled
+ * at ci_otg_work
*/
struct ci13xxx {
struct device *dev;
@@ -140,6 +143,7 @@ struct ci13xxx {
enum ci_role role;
bool is_otg;
struct work_struct work;
+ struct delayed_work dwork;
struct workqueue_struct *wq;
struct dma_pool *qh_pool;
@@ -166,6 +170,8 @@ struct ci13xxx {
struct usb_phy *transceiver;
struct usb_hcd *hcd;
struct usb_otg otg;
+ bool id_event;
+ bool b_sess_valid_event;
};
static inline struct ci_role_driver *ci_role(struct ci13xxx *ci)
@@ -201,7 +207,6 @@ static inline void ci_role_stop(struct ci13xxx *ci)
ci->roles[role]->stop(ci);
}
-
/******************************************************************************
* REGISTERS
*****************************************************************************/
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 136869b..793fdba 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -110,7 +110,8 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
pdata->capoffset = DEF_CAPOFFSET;
pdata->flags = CI13XXX_REQUIRE_TRANSCEIVER |
CI13XXX_PULLUP_ON_VBUS |
- CI13XXX_DISABLE_STREAMING;
+ CI13XXX_DISABLE_STREAMING |
+ CI13XXX_REGS_SHARED;
pdata->phy_mode = of_usb_get_phy_mode(pdev->dev.of_node);
pdata->dr_mode = of_usb_get_dr_mode(pdev->dev.of_node);
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index c89f2aa..c563e17 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -75,6 +75,7 @@
#include "bits.h"
#include "host.h"
#include "debug.h"
+#include "otg.h"
/* Controller register map */
static uintptr_t ci_regs_nolpm[] = {
@@ -201,6 +202,14 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
if (ci->hw_ep_max > ENDPT_MAX)
return -ENODEV;
+ /* Disable all interrupts bits */
+ hw_write(ci, OP_USBINTR, 0xffffffff, 0);
+ ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS);
+
+ /* Clear all interrupts status bits*/
+ hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
+ ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS);
+
dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n",
ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
@@ -302,24 +311,131 @@ static enum ci_role ci_otg_role(struct ci13xxx *ci)
}
/**
- * ci_role_work - perform role changing based on ID pin
- * @work: work struct
+ * hw_wait_reg: wait the register value
+ *
+ * Sometimes, it needs to wait register value before going on.
+ * Eg, when switch to device mode, the vbus value should be lower
+ * than OTGSC_BSV before connects to host.
+ *
+ * @ci: the controller
+ * @reg: register index
+ * @mask: mast bit
+ * @value: the bit value to wait
+ * @timeout: timeout to indicate an error
+ *
+ * This function returns an error code if timeout
*/
-static void ci_role_work(struct work_struct *work)
+static int hw_wait_reg(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask,
+ u32 value, unsigned long timeout)
+{
+ unsigned long elapse = jiffies + timeout;
+
+ while (hw_read(ci, reg, mask) != value) {
+ if (time_after(jiffies, elapse)) {
+ dev_err(ci->dev, "timeout waiting for %08x in %d\n",
+ mask, reg);
+ return -ETIMEDOUT;
+ }
+ msleep(20);
+ }
+
+ return 0;
+}
+
+/*
+ * Since there are some capacitances at vbus, the vbus may not
+ * change very quickly when we stop/start internal 5v.
+ * Below is a vbus stable timeout value, the routine will quit
+ * if the vbus gets the required value, we can think there are some
+ * problems for hardware if the vbus can't get the required value
+ * within 5 seconds.
+ */
+#define CI_VBUS_STABLE_TIMEOUT 500
+static void ci_handle_id_switch(struct ci13xxx *ci)
{
- struct ci13xxx *ci = container_of(work, struct ci13xxx, work);
enum ci_role role = ci_otg_role(ci);
if (role != ci->role) {
dev_dbg(ci->dev, "switching from %s to %s\n",
ci_role(ci)->name, ci->roles[role]->name);
+ /* 1. Finish the current role */
ci_role_stop(ci);
+ hw_device_reset(ci, USBMODE_CM_IDLE);
+
+ /* 2. Turn on/off vbus according to coming role */
+ if (role == CI_ROLE_GADGET) {
+ otg_set_vbus(&ci->otg, false);
+ /* wait vbus lower than OTGSC_BSV */
+ hw_wait_reg(ci, OP_OTGSC, OTGSC_BSV, 0,
+ CI_VBUS_STABLE_TIMEOUT);
+ } else if (role == CI_ROLE_HOST) {
+ otg_set_vbus(&ci->otg, true);
+ /* wait vbus higher than OTGSC_AVV */
+ hw_wait_reg(ci, OP_OTGSC, OTGSC_AVV, OTGSC_AVV,
+ CI_VBUS_STABLE_TIMEOUT);
+ }
+
+ /* 3. Begin the new role */
ci_role_start(ci, role);
- enable_irq(ci->irq);
}
}
+static void ci_handle_vbus_change(struct ci13xxx *ci)
+{
+ u32 otgsc = hw_read(ci, OP_OTGSC, ~0);
+
+ if (otgsc & OTGSC_BSV)
+ usb_gadget_vbus_connect(&ci->gadget);
+ else
+ usb_gadget_vbus_disconnect(&ci->gadget);
+}
+
+/**
+ * ci_otg_work - perform otg (vbus/id) event handle
+ * @work: work struct
+ */
+static void ci_otg_work(struct work_struct *work)
+{
+ struct ci13xxx *ci = container_of(work, struct ci13xxx, work);
+
+ if (ci->id_event) {
+ ci->id_event = false;
+ ci_handle_id_switch(ci);
+ } else if (ci->b_sess_valid_event) {
+ ci->b_sess_valid_event = false;
+ ci_handle_vbus_change(ci);
+ } else
+ dev_err(ci->dev, "unexpected event occurs at %s\n", __func__);
+
+ enable_irq(ci->irq);
+}
+
+static void ci_delayed_work(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct ci13xxx *ci = container_of(dwork, struct ci13xxx, dwork);
+
+ if (ci->role == CI_ROLE_GADGET) {
+ /*
+ * if it is device mode:
+ * - Enable vbus detect
+ * - If it has already connected to host, notify udc
+ */
+ ci_enable_otg_interrupt(ci, OTGSC_BSVIE);
+ ci_handle_vbus_change(ci);
+ } else if (ci->is_otg && (ci->role == CI_ROLE_HOST)) {
+ /* USB Device at the MicroB to A cable */
+ otg_set_vbus(&ci->otg, true);
+ }
+}
+
+static inline void ci_role_destroy(struct ci13xxx *ci)
+{
+ ci_hdrc_gadget_destroy(ci);
+ ci_hdrc_host_destroy(ci);
+}
+
static ssize_t show_role(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -352,25 +468,50 @@ static ssize_t store_role(struct device *dev, struct device_attribute *attr,
static DEVICE_ATTR(role, S_IRUSR | S_IWUSR, show_role, store_role);
+static bool ci_is_otg_capable(struct ci13xxx *ci)
+{
+ return hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC | DCCPARAMS_HC)
+ == (DCCPARAMS_DC | DCCPARAMS_HC);
+}
+
static irqreturn_t ci_irq(int irq, void *data)
{
struct ci13xxx *ci = data;
irqreturn_t ret = IRQ_NONE;
u32 otgsc = 0;
- if (ci->is_otg)
+ if (ci_is_otg_capable(ci))
otgsc = hw_read(ci, OP_OTGSC, ~0);
- if (ci->role != CI_ROLE_END)
- ret = ci_role(ci)->irq(ci);
+ /*
+ * Handle id change interrupt, it indicates device/host function
+ * switch.
+ */
+ if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
+ ci->id_event = true;
+ ci_clear_otg_interrupt(ci, OTGSC_IDIS);
+ disable_irq_nosync(ci->irq);
+ queue_work(ci->wq, &ci->work);
+ return IRQ_HANDLED;
+ }
- if (ci->is_otg && (otgsc & OTGSC_IDIS)) {
- hw_write(ci, OP_OTGSC, OTGSC_IDIS, OTGSC_IDIS);
+ /*
+ * Handle vbus change interrupt, it indicates device connection
+ * and disconnection events.
+ */
+ if (ci_is_otg_capable(ci) && (otgsc & OTGSC_BSVIE)
+ && (otgsc & OTGSC_BSVIS)) {
+ ci->b_sess_valid_event = true;
+ ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
disable_irq_nosync(ci->irq);
queue_work(ci->wq, &ci->work);
- ret = IRQ_HANDLED;
+ return IRQ_HANDLED;
}
+ /* Handle device/host interrupt */
+ if (ci->role != CI_ROLE_END)
+ ret = ci_role(ci)->irq(ci);
+
return ret;
}
@@ -481,7 +622,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
return -ENODEV;
}
- INIT_WORK(&ci->work, ci_role_work);
+ INIT_WORK(&ci->work, ci_otg_work);
+ INIT_DELAYED_WORK(&ci->dwork, ci_delayed_work);
ci->wq = create_singlethread_workqueue("ci_otg");
if (!ci->wq) {
dev_err(dev, "can't create workqueue\n");
@@ -512,7 +654,10 @@ static int ci_hdrc_probe(struct platform_device *pdev)
}
if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
+ dev_dbg(dev, "support otg\n");
ci->is_otg = true;
+ /* if otg is supported, create struct usb_otg */
+ ci_hdrc_otg_init(ci);
/* ID pin needs 1ms debouce time, we delay 2ms for safe */
mdelay(2);
ci->role = ci_otg_role(ci);
@@ -528,7 +673,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
ret = -ENODEV;
- goto rm_wq;
+ goto free_memory;
}
platform_set_drvdata(pdev, ci);
@@ -539,17 +684,22 @@ static int ci_hdrc_probe(struct platform_device *pdev)
ret = device_create_file(dev, &dev_attr_role);
if (ret)
- goto rm_attr;
+ goto free_irq;
- if (ci->is_otg)
- hw_write(ci, OP_OTGSC, OTGSC_IDIE, OTGSC_IDIE);
+ /* Defer some operations */
+ queue_delayed_work(ci->wq, &ci->dwork, msecs_to_jiffies(200));
return ret;
-rm_attr:
- device_remove_file(dev, &dev_attr_role);
+free_irq:
+ free_irq(ci->irq, ci);
stop:
- ci_role_stop(ci);
+ ci_role_destroy(ci);
+free_memory:
+ if (ci->roles[CI_ROLE_HOST])
+ devm_kfree(dev, ci->roles[CI_ROLE_HOST]);
+ if (ci->roles[CI_ROLE_GADGET])
+ devm_kfree(dev, ci->roles[CI_ROLE_GADGET]);
rm_wq:
flush_workqueue(ci->wq);
destroy_workqueue(ci->wq);
@@ -565,7 +715,7 @@ static int ci_hdrc_remove(struct platform_device *pdev)
destroy_workqueue(ci->wq);
device_remove_file(ci->dev, &dev_attr_role);
free_irq(ci->irq, ci);
- ci_role_stop(ci);
+ ci_role_destroy(ci);
return 0;
}
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 8e9d312..ead3158 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -105,3 +105,9 @@ int ci_hdrc_host_init(struct ci13xxx *ci)
return 0;
}
+
+void ci_hdrc_host_destroy(struct ci13xxx *ci)
+{
+ if (ci->role == CI_ROLE_HOST)
+ host_stop(ci);
+}
diff --git a/drivers/usb/chipidea/host.h b/drivers/usb/chipidea/host.h
index 761fb1f..19cc72d 100644
--- a/drivers/usb/chipidea/host.h
+++ b/drivers/usb/chipidea/host.h
@@ -4,13 +4,17 @@
#ifdef CONFIG_USB_CHIPIDEA_HOST
int ci_hdrc_host_init(struct ci13xxx *ci);
-
+void ci_hdrc_host_destroy(struct ci13xxx *ci);
#else
static inline int ci_hdrc_host_init(struct ci13xxx *ci)
{
return -ENXIO;
}
+static inline void ci_hdrc_host_destroy(struct ci13xxx *ci)
+{
+
+}
#endif
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index 7dea3b3..2986d91 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -10,21 +10,28 @@
* published by the Free Software Foundation.
*/
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
+#include <linux/usb/gadget.h>
#include <linux/usb/chipidea.h>
#include "ci.h"
-#include "udc.h"
#include "bits.h"
-#include "host.h"
-#include "debug.h"
+
+void ci_clear_otg_interrupt(struct ci13xxx *ci, u32 bits)
+{
+ /* Only clear request bits */
+ hw_write(ci, OP_OTGSC, OTGSC_INT_STATUS_BITS, bits);
+}
+
+void ci_enable_otg_interrupt(struct ci13xxx *ci, u32 bits)
+{
+ hw_write(ci, OP_OTGSC, bits, bits);
+}
+
+void ci_disable_otg_interrupt(struct ci13xxx *ci, u32 bits)
+{
+ hw_write(ci, OP_OTGSC, bits, 0);
+}
static int ci_otg_set_peripheral(struct usb_otg *otg,
struct usb_gadget *periph)
@@ -55,6 +62,7 @@ int ci_hdrc_otg_init(struct ci13xxx *ci)
ci->otg.set_host = ci_otg_set_host;
if (!IS_ERR_OR_NULL(ci->transceiver))
ci->transceiver->otg = &ci->otg;
+ ci_enable_otg_interrupt(ci, OTGSC_IDIE);
return 0;
}
diff --git a/drivers/usb/chipidea/otg.h b/drivers/usb/chipidea/otg.h
index b4c6b3e..fa30428 100644
--- a/drivers/usb/chipidea/otg.h
+++ b/drivers/usb/chipidea/otg.h
@@ -2,5 +2,8 @@
#define __DRIVERS_USB_CHIPIDEA_OTG_H
int ci_hdrc_otg_init(struct ci13xxx *ci);
+void ci_clear_otg_interrupt(struct ci13xxx *ci, u32 bits);
+void ci_enable_otg_interrupt(struct ci13xxx *ci, u32 bits);
+void ci_disable_otg_interrupt(struct ci13xxx *ci, u32 bits);
#endif /* __DRIVERS_USB_CHIPIDEA_OTG_H */
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index d214448..e82dae4 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -31,6 +31,7 @@
#include "ci.h"
#include "udc.h"
+#include "otg.h"
#include "bits.h"
#include "debug.h"
@@ -1371,6 +1372,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
pm_runtime_get_sync(&_gadget->dev);
hw_device_reset(ci, USBMODE_CM_DC);
hw_device_state(ci, ci->ep0out->qh.dma);
+ dev_dbg(ci->dev, "Connected to host\n");
} else {
hw_device_state(ci, 0);
if (ci->platdata->notify_event)
@@ -1378,6 +1380,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
CI13XXX_CONTROLLER_STOPPED_EVENT);
_gadget_stop_activity(&ci->gadget);
pm_runtime_put_sync(&_gadget->dev);
+ dev_dbg(ci->dev, "Disconnected from host\n");
}
}
@@ -1741,7 +1744,12 @@ static int udc_start(struct ci13xxx *ci)
if (!IS_ERR_OR_NULL(ci->transceiver)) {
retval = otg_set_peripheral(ci->transceiver->otg,
&ci->gadget);
- if (retval)
+ /*
+ * If we implement all USB functions using chipidea drivers,
+ * it doesn't need to call above API, meanwhile, if we only
+ * use gadget function, calling above API is useless.
+ */
+ if (retval && retval != -ENOTSUPP)
goto remove_dbg;
}
@@ -1778,12 +1786,27 @@ free_qh_pool:
return retval;
}
+static int udc_id_switch_for_device(struct ci13xxx *ci)
+{
+ ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
+ ci_enable_otg_interrupt(ci, OTGSC_BSVIE);
+
+ return 0;
+}
+
+static void udc_id_switch_for_host(struct ci13xxx *ci)
+{
+ /* host doesn't care B_SESSION_VALID event */
+ ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
+ ci_disable_otg_interrupt(ci, OTGSC_BSVIE);
+}
+
/**
- * udc_remove: parent remove must call this to remove UDC
+ * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC
*
* No interrupts active, the IRQ has been released
*/
-static void udc_stop(struct ci13xxx *ci)
+void ci_hdrc_gadget_destroy(struct ci13xxx *ci)
{
if (ci == NULL)
return;
@@ -1802,15 +1825,13 @@ static void udc_stop(struct ci13xxx *ci)
}
dbg_remove_files(&ci->gadget.dev);
device_unregister(&ci->gadget.dev);
- /* my kobject is dynamic, I swear! */
- memset(&ci->gadget, 0, sizeof(ci->gadget));
}
/**
* ci_hdrc_gadget_init - initialize device related bits
* ci: the controller
*
- * This function enables the gadget role, if the device is "device capable".
+ * This function initializes gadget, if the device is "device capable".
*/
int ci_hdrc_gadget_init(struct ci13xxx *ci)
{
@@ -1823,11 +1844,11 @@ int ci_hdrc_gadget_init(struct ci13xxx *ci)
if (!rdrv)
return -ENOMEM;
- rdrv->start = udc_start;
- rdrv->stop = udc_stop;
+ rdrv->start = udc_id_switch_for_device;
+ rdrv->stop = udc_id_switch_for_host;
rdrv->irq = udc_irq;
rdrv->name = "gadget";
ci->roles[CI_ROLE_GADGET] = rdrv;
- return 0;
+ return udc_start(ci);
}
diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h
index 4ff2384..6553e4d 100644
--- a/drivers/usb/chipidea/udc.h
+++ b/drivers/usb/chipidea/udc.h
@@ -80,6 +80,7 @@ struct ci13xxx_req {
#ifdef CONFIG_USB_CHIPIDEA_UDC
int ci_hdrc_gadget_init(struct ci13xxx *ci);
+void ci_hdrc_gadget_destroy(struct ci13xxx *ci);
#else
@@ -87,7 +88,10 @@ static inline int ci_hdrc_gadget_init(struct ci13xxx *ci)
{
return -ENXIO;
}
+static inline void ci_hdrc_gadget_destroy(struct ci13xxx *ci)
+{
+}
#endif
#endif /* __DRIVERS_USB_CHIPIDEA_UDC_H */
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
