On Wed, Feb 27, 2013 at 03:20:25PM +0100, Marc Kleine-Budde wrote:
> Hello,
>
> this series depends on the series "[PATCH 0/3] otg-for-v3.10-v1: separate phy
> code and add DT helper" (a.k.a. tags/otg-for-v3.10-v1) posted earlier and is
> intended for v3.10. The chipidea driver is converted to make use of the DT
> helper functions.
>
> regards,
> Marc
>
>
> The following changes since commit 8a4c9f8489b2fce9e7bf0eb43fdb160ab51adc2c:
>
> USB mxs-phy: Register phy with framework (2013-02-27 13:48:21 +0100)
>
> are available in the git repository at:
>
> git://git.pengutronix.de/git/mkl/linux.git tags/chipidea-for-v3.10-v1
>
> for you to fetch changes up to 5d837224ea36da50f3e744a65fb23af1fa0a480d:
>
> USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy (2013-02-27 13:49:07 +0100)
>
> ----------------------------------------------------------------
> USB chipidea: make use of DT helpers in chipidea driver
>
> Make use of DT helper functions for handling the dr_mode and phy_type property.
>
> ----------------------------------------------------------------
> Michael Grzeschik (2):
> USB chipidea: ci13xxx-imx: create dynamic platformdata
> USB chipidea: add PTW and PTS handling
>
> Sascha Hauer (3):
> USB chipidea: introduce dual role mode pdata flags
> USB chipidea i.MX: introduce dr_mode property
> USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy
>
> .../devicetree/bindings/usb/ci13xxx-imx.txt | 6 ++
> drivers/usb/chipidea/bits.h | 14 +++-
> drivers/usb/chipidea/ci13xxx_imx.c | 67 +++++++++++---------
> drivers/usb/chipidea/core.c | 61 ++++++++++++++++--
> include/linux/usb/chipidea.h | 3 +-
> 5 files changed, 112 insertions(+), 39 deletions(-)
>
>
>
>
Hi,
with this series plus
otg-for-v3.9-v1: USB otg: fix usage of try_module_get() and module_put()
otg-for-v3.10-v1: separate phy code and add DT helper
v9: Add tested id switch and vbus connect detect support for Chipidea
and
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 13b7053..1eeff3c 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -907,7 +907,8 @@
compatible = "fsl,imx28-usb", "fsl,imx27-usb";
reg = <0x80080000 0x10000>;
interrupts = <93>;
- clocks = <&clks 60>;
+ clocks = <&clks 60>, <&clks 60>, <&clks 60>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbphy = <&usbphy0>;
status = "disabled";
};
@@ -916,7 +917,8 @@
compatible = "fsl,imx28-usb", "fsl,imx27-usb";
reg = <0x80090000 0x10000>;
interrupts = <92>;
- clocks = <&clks 61>;
+ clocks = <&clks 61>, <&clks 61>, <&clks 61>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbphy = <&usbphy1>;
status = "disabled";
};
I have USB otg+host working on v3.8 on an i.MX28.
So,
Tested-by: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
Regards,
Steffen
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
