Fengguang Wu run into a kernel ops after he complied dummy_hcd and g_cdc into the kernel. The problem was that u_serial was used by g_cdc before u_serial was initialized. In the module case eveything is initialized in the correct order but if we compile it into the kernel we rely on Makefile order which I did wrong and now I correct this. Cc: Fengguang Wu <fengguang.wu@xxxxxxxxx> Signed-off-by: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx> --- I kinda assumed that this was already fixed (i.e. a patch like this was sent) but it seems not to be that case. drivers/usb/gadget/Makefile | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 97a13c3..1ded3d4 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -35,6 +35,12 @@ mv_udc-y := mv_udc_core.o obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o +# USB Functions +obj-$(CONFIG_USB_U_SERIAL) += u_serial.o +obj-$(CONFIG_USB_F_ACM) += f_acm.o +f_ss_lb-y := f_loopback.o f_sourcesink.o +obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o + # # USB gadget drivers # @@ -74,9 +80,3 @@ obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o obj-$(CONFIG_USB_G_NCM) += g_ncm.o obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o - -# USB Functions -obj-$(CONFIG_USB_F_ACM) += f_acm.o -f_ss_lb-y := f_loopback.o f_sourcesink.o -obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o -obj-$(CONFIG_USB_U_SERIAL) += u_serial.o -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
