On Wed, Feb 27, 2013 at 11:06:05PM +0200, Alexander Shishkin wrote:
> On Feb 27, 2013 8:33 AM, "Peter Chen" <peter.chen@xxxxxxxxxxxxx> wrote:
> >
> > - During the connect/disconnect host, we need to pullup
> > and pulldown dp
> > - Make sure the dp is not pullup until the vbus is on when
> > flag CI13XXX_PULLUP_ON_VBUS is set
> > - Using hw_device_state when set run/stop bit
> >
> > Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
> > ---
> > drivers/usb/chipidea/udc.c | 10 ++++++++--
> > 1 files changed, 8 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> > index e82dae4..597ae64 100644
> > --- a/drivers/usb/chipidea/udc.c
> > +++ b/drivers/usb/chipidea/udc.c
> > @@ -91,8 +91,10 @@ static int hw_device_state(struct ci13xxx *ci, u32
> dma)
> > /* interrupt, error, port change, reset, sleep/suspend
> */
> > hw_write(ci, OP_USBINTR, ~0,
> >
> USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
> > + hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
> > } else {
> > hw_write(ci, OP_USBINTR, ~0, 0);
> > + hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
> > }
> > return 0;
> > }
> > @@ -1424,10 +1426,14 @@ static int ci13xxx_pullup(struct usb_gadget
> *_gadget, int is_on)
> > {
> > struct ci13xxx *ci = container_of(_gadget, struct ci13xxx,
> gadget);
> >
> > + if ((ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) &&
> > + !ci->vbus_active)
> > + return -ENOTSUPP;
>
> This doesn't look right, if !ci->vbus_active *and* is_on, then we can't do
> what we're asked to do, so it makes sense to return error (which, by the
> looks of it, will be ignored by gadgets anyway, but that's another thing),
> and I don't think ENOTSUPP is the right choice here.
>
> In case !ci->vbus_active and !is_on, it should be safe to return 0.
At later patch, the flag CI13XXX_PULLUP_ON_VBUS is retired. The code likes
below:
static int ci13xxx_pullup(struct usb_gadget *_gadget, int is_on)
{
struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
if (!ci->vbus_active)
return -ENOTSUPP;
if (is_on)
hw_device_state(ci, ci->ep0out->qh.dma);
else
hw_device_state(ci, 0);
return 0;
}
So you suggested I change like below:
static int ci13xxx_pullup(struct usb_gadget *_gadget, int is_on)
{
struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
if (!ci->vbus_active)
return -EPERM;
if (is_on)
hw_device_state(ci, ci->ep0out->qh.dma);
else
hw_device_state(ci, 0);
return 0;
}
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
