Now that machines may select the mode of working of DWC3 (HOST only,
GADGET only or DUAL_ROLE), lets set DWC3 mode based on that
rather than fixing it to whatever DWC3 hardware says.
This way we can skip initializing Gadget/Host in case
we are using Host-only/Gadget-only mode respectively.
Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
---
Changes from RFC patch "usb: dwc3: Set GCTL.PrtCapDir based on selected mode"
- Setting the mode in dwc3 context structure based on
selected mode in machine, rather than programming PrtCapDir
drivers/usb/dwc3/core.c | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 79f335f..be0672f 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -478,7 +478,12 @@ static int dwc3_probe(struct platform_device *pdev)
goto err1;
}
- mode = DWC3_MODE(dwc->hwparams.hwparams0);
+ if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
+ mode = DWC3_MODE_HOST;
+ else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
+ mode = DWC3_MODE_DEVICE;
+ else
+ mode = DWC3_MODE_DRD;
switch (mode) {
case DWC3_MODE_DEVICE:
--
1.7.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
