By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@xxxxxx> --- drivers/usb/gadget/atmel_usba_udc.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index bc19496..b9efe4d 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1900,9 +1900,9 @@ static int __init usba_udc_probe(struct platform_device *pdev) dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n", (unsigned long)fifo->start, udc->fifo); - device_initialize(&udc->gadget.dev); udc->gadget.dev.parent = &pdev->dev; udc->gadget.dev.dma_mask = pdev->dev.dma_mask; + udc->gadget.register_my_device = true; platform_set_drvdata(pdev, udc); @@ -1962,12 +1962,6 @@ static int __init usba_udc_probe(struct platform_device *pdev) } udc->irq = irq; - ret = device_add(&udc->gadget.dev); - if (ret) { - dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret); - goto err_device_add; - } - if (gpio_is_valid(pdata->vbus_pin)) { if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) { udc->vbus_pin = pdata->vbus_pin; @@ -2007,9 +2001,6 @@ err_add_udc: gpio_free(udc->vbus_pin); } - device_unregister(&udc->gadget.dev); - -err_device_add: free_irq(irq, udc); err_request_irq: kfree(usba_ep); @@ -2053,8 +2044,6 @@ static int __exit usba_udc_remove(struct platform_device *pdev) clk_put(udc->hclk); clk_put(udc->pclk); - device_unregister(&udc->gadget.dev); - return 0; } -- 1.8.1.rc1.5.g7e0651a -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html