Linux Serial
[Prev Page][Next Page]
- [PATCH AUTOSEL 4.9 16/45] tty: serial_core: Set port active bit in uart_port_activate,
Sasha Levin
- [PATCH AUTOSEL 4.9 12/45] serial: 8250: Fix TX interrupt handling condition,
Sasha Levin
- [PATCH AUTOSEL 4.9 11/45] tty: serial: msm_serial: avoid system lockup condition,
Sasha Levin
- [PATCH AUTOSEL 4.9 10/45] tty/serial: digicolor: Fix digicolor-usart already registered warning,
Sasha Levin
- [PATCH AUTOSEL 4.4 24/35] serial: sh-sci: Fix TX DMA buffer flushing and workqueue races,
Sasha Levin
- [PATCH AUTOSEL 4.9 32/45] serial: sh-sci: Fix TX DMA buffer flushing and workqueue races,
Sasha Levin
- [PATCH AUTOSEL 4.9 31/45] serial: sh-sci: Terminate TX DMA during buffer flushing,
Sasha Levin
- [PATCH AUTOSEL 4.14 39/60] serial: sh-sci: Terminate TX DMA during buffer flushing,
Sasha Levin
- [PATCH AUTOSEL 4.14 12/60] tty/serial: digicolor: Fix digicolor-usart already registered warning,
Sasha Levin
- [PATCH AUTOSEL 4.14 05/60] tty: serial: cpm_uart - fix init when SMC is relocated,
Sasha Levin
- [PATCH AUTOSEL 5.1 035/141] tty/serial: digicolor: Fix digicolor-usart already registered warning,
Sasha Levin
- [PATCH AUTOSEL 5.2 079/171] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Sasha Levin
- [PATCH AUTOSEL 5.2 050/171] serial: 8250: Fix TX interrupt handling condition,
Sasha Levin
- [PATCH AUTOSEL 5.2 048/171] tty/serial: digicolor: Fix digicolor-usart already registered warning,
Sasha Levin
- [PATCH v3] serial: 8250-mtk: modify mtk uart power and clock management,
Changqi Hu
- [PATCH] 8250_lpss: check null return when calling pci_ioremap_bar,
Navid Emamdoost
Re: [PATCH] 8250_lpss: check null return when calling pci_ioremap_bar,
kbuild test robot
[PATCH V36 18/29] Lock down TIOCSSERIAL,
Matthew Garrett
[PATCH v2] serial: 8250-mtk: modify mtk uart power and clock management,
Changqi Hu
[PATCH] modify mtk uart power and clock management,
Changqi Hu
[PATCH tty/serial 0/5] tty: serial: fsl_lpuart: code clean up and bugfix,
fugang . duan
[PATCH V35 18/29] Lock down TIOCSSERIAL,
Matthew Garrett
[PATCH v3 22/24] tty: serial: Remove call to memset after pci_alloc_consistent,
Fuqian Huang
[PATCH v2 0/5] usb: gadget: u_serial: Fix and cleanup,
Ladislav Michl
[PATCH v6 0/8] Add basic SoC support for mt6765,
Macpaul Lin
[PATCH 02/12] Documentation/arm: repointer docs to Documentation/arch/arm,
Alex Shi
[PATCH] tty: amba-pl011: Make TX optimisation conditional,
Phil Elwell
[GIT PULL] TTY/Serial patches for 5.3-rc1,
Greg KH
[PATCH v4] serial/8250: Add support for NI-Serial PXI/PXIe+485 devices,
jeyentam
[PATCH v3] serial/8250: Add support for NI-Serial PXI/PXIe+485 devices,
jeyentam
[PATCH RESEND tty/serial 1/1] tty: serial: fsl_lpuart: add imx8qxp support,
fugang . duan
[PATCH tty/serial 0/2] tty: serial: fsl_lpuart: add imx8qxp support,
fugang . duan
[PATCH 00/11] Platform drivers, provide a way to add sysfs groups easily,
Greg Kroah-Hartman
[PATCH V2 2/2] PCI: Add NI-Serial PXI/PXIe+485 device IDs,
jeyentam
[PATCH V2 1/2] serial/8250: Add support for NI-Serial PXI/PXIe+485 devices,
jeyentam
[PATCH -next] serial: 8250: 8250_core: Fix missing unlock on error in serial8250_register_8250_port(),
Wei Yongjun
[PATCH 2/2] PCI: Add NI-Serial PXI/PXIe+485 device IDs,
jeyentam
[PATCH 1/2] serial/8250: Add support for NI-Serial PXI/PXIe+485 devices.,
jeyentam
[PATCH 32/39] docs: serial: move it to the driver-api,
Mauro Carvalho Chehab
[bug report] tty/serial/8250: use mctrl_gpio helpers,
Dan Carpenter
[PATCH v2 21/27] tty: remove unneeded memset,
Fuqian Huang
Issue with XR17V35X,
Robert Middleton
[PATCH 47/87] tty: serial: remove memset after pci_alloc_consistent in icom.c,
Fuqian Huang
[PATCH] serial: mpsc: Remove obsolete MPSC driver,
Mark Greer
[PATCH 0/2] serial: imx: use UPF_AUTO_CTS,
Sascha Hauer
[PATCH v2 0/7] TTY Keyboard Status Request,
Arseny Maslennikov
DMA coherency in drivers/tty/serial/mpsc.c,
Christoph Hellwig
[patch 0/5] x86/irq: Cure various interrupt issues,
Thomas Gleixner
[patch v3 0/5] *** DMA based UART driver for AST2500 ***,
sudheer.v
[PATCH] dmaengine: rcar-dmac: Reject zero-length slave DMA requests,
Geert Uytterhoeven
[PATCH 0/2] serial: sh-sci: Fix .flush_buffer() issues,
Geert Uytterhoeven
junk character issue on minicom and screen,
Shyam Saini
[PATCH V34 18/29] Lock down TIOCSSERIAL,
Matthew Garrett
[patch 0/5] *** DMA based UART driver for AST2500 ***,
sudheer.v
[PATCH V33 19/30] Lock down TIOCSSERIAL,
Matthew Garrett
[PATCH 1/2 v9] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH v2] dt-bindings: serial: add documentation for Rx in-band wakeup support,
Claire Chang
[PATCH] Revert "serial: 8250: Don't service RX FIFO if interrupts are disabled",
Oliver Barta
[tty:tty-testing 42/52] drivers/tty/serial/8250/8250_pci.c:1330:1: sparse: sparse: symbol 'pericom_do_set_divisor' was not declared. Should it be static?,
kbuild test robot
[PATCH 0/5] STM32 usart FIFO handling,
Erwan Le Ray
[PATCH 1/3 v8] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH 1/3 v7] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH v1] serial: 8250: factor out serial8250_{set,clear}_THRI() helpers,
Andy Shevchenko
[PATCH] tty: serial_core: recover uport->cons->cflag on uart_close,
kpark3469
[PATCH v1] tty: serial: max310x: Add optional reset gpio,
Mylène Josserand
[PATCH] serial: imx: fix RTS/CTS setting,
Sascha Hauer
[PATCH] serial: sh-sci: fix uninitialized variable warning,
Charles
[PATCH v3 0/7] Use MFD framework for SGI IOC3 drivers,
Thomas Bogendoerfer
[PATCH 1/3 v6] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH v3 00/10] STM32 usart power improvements,
Erwan Le Ray
- [PATCH v3 10/10] ARM: dts: stm32: add wakeup capability on each usart/uart on stm32mp157c,
Erwan Le Ray
- [PATCH v3 09/10] ARM: dts: stm32: Update UART4 pin states on stm32mp157a-dk1,
Erwan Le Ray
- [PATCH v3 08/10] ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1,
Erwan Le Ray
- [PATCH v3 04/10] serial: stm32: add pm_runtime support,
Erwan Le Ray
- [PATCH v3 07/10] ARM: dts: stm32: update uart4 pin configurations for low power,
Erwan Le Ray
- [PATCH v3 03/10] serial: stm32: select pinctrl state in each suspend/resume function,
Erwan Le Ray
- [PATCH v3 06/10] serial: stm32: add support for no_console_suspend,
Erwan Le Ray
- [PATCH v3 05/10] serial: stm32: Use __maybe_unused instead of #if CONFIG_PM_SLEEP,
Erwan Le Ray
- [PATCH v3 01/10] dt-bindings: serial: stm32: add wakeup option,
Erwan Le Ray
- [PATCH v3 02/10] dt-bindings: serial: add optional pinctrl states,
Erwan Le Ray
[tty:tty-next 27/39] drivers/tty/serial/stm32-usart.c:1310:2: error: implicit declaration of function 'pinctrl_pm_select_default_state'; did you mean 'irq_set_default_host'?,
kbuild test robot
[PATCH v2 0/6] serial: uartps:,
Michal Simek
RFC: can we get rid of ->request_port() boilerplate ?,
Enrico Weigelt, metux IT consult
[PATCH] serial: fsl_lpuart: Remove unneeded OOM error message,
Fabio Estevam
[PATCH v2 00/10] STM32 usart power improvements,
Erwan Le Ray
- [PATCH v2 03/10] serial: stm32: select pinctrl state in each suspend/resume function,
Erwan Le Ray
- [PATCH v2 04/10] serial: stm32: add pm_runtime support,
Erwan Le Ray
- [PATCH v2 08/10] ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1,
Erwan Le Ray
- [PATCH v2 07/10] ARM: dts: stm32: update uart4 pin configurations for low power,
Erwan Le Ray
- [PATCH v2 09/10] ARM: dts: stm32: Update UART4 pin states on stm32mp157a-dk1,
Erwan Le Ray
- [PATCH v2 10/10] ARM: dts: stm32: add wakeup capability on each usart/uart on stm32mp157c,
Erwan Le Ray
- [PATCH v2 06/10] serial: stm32: add support for no_console_suspend,
Erwan Le Ray
- [PATCH v2 05/10] serial: stm32: Use __maybe_unused instead of #if CONFIG_PM_SLEEP,
Erwan Le Ray
- [PATCH v2 01/10] dt-bindings: serial: stm32: add wakeup option,
Erwan Le Ray
- [PATCH v2 02/10] dt-bindings: serial: add optional pinctrl states,
Erwan Le Ray
[PATCH] dt-bindings: serial: add documentation for Rx in-band wakeup support,
Claire Chang
[PATCH v4 0/1] Add support for higher baud rates to Pericom,
jay . dolan
[PATCH 1/2 v5] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH v3] tty: serial: msm_serial: avoid system lockup condition,
Jorge Ramirez-Ortiz
[PATCH 1/2] serial: xilinx_uartps: Fix warnings in the driver,
Michal Simek
[PATCH v2] tty: serial: msm_serial: avoid system lockup condition,
Jorge Ramirez-Ortiz
[PATCH] tty: serial: msm_serial: avoid system lockup condition,
Jorge Ramirez-Ortiz
serial: 8250: Potential loss of transmission error information in serial8250_handle_irq,
Oliver Barta
[PATCH v3] serial: stm32: fix a recursive locking in stm32_config_rs485,
Borut Seljak
[PATCH RFC] serial: imx: fix locking in set_termios(),
Sergey Organov
[PATCH] tty: serial: 8250-of: Do not warn on deferred probe,
Thierry Reding
[patch 0/5] *** Cover Letter: patch submission for AST2500 UART driver ***,
sudheer.v
[PATCH] serial: stm32: fix a recursive locking in stm32_config_rs485,
Borut Seljak
[PATCH v2] serial: stm32: fix a recursive locking in stm32_config_rs485,
Borut Seljak
[PATCH 00/10] STM32 usart power improvements,
Erwan Le Ray
- [PATCH 01/10] dt-bindings: serial: stm32: add wakeup option,
Erwan Le Ray
- [PATCH 02/10] dt-bindings: serial: add optional pinctrl states,
Erwan Le Ray
- [PATCH 04/10] serial: stm32: add pm_runtime support,
Erwan Le Ray
- [PATCH 03/10] serial: stm32: select pinctrl state in each suspend/resume function,
Erwan Le Ray
- [PATCH 05/10] serial: stm32: Use __maybe_unused instead of #if CONFIG_PM_SLEEP,
Erwan Le Ray
- [PATCH 08/10] ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1,
Erwan Le Ray
- [PATCH 07/10] ARM: dts: stm32: update uart4 pin configurations for low power,
Erwan Le Ray
- [PATCH 06/10] serial: stm32: add support for no_console_suspend,
Erwan Le Ray
- [PATCH 10/10] ARM: dts: stm32: add wakeup capability on each usart/uart on stm32mp157c,
Erwan Le Ray
- [PATCH 09/10] ARM: dts: stm32: Update UART4 pin states on stm32mp157a-dk1,
Erwan Le Ray
- Re: [PATCH 00/10] STM32 usart power improvements,
Alexandre Torgue
[PATCH v2 1/2] serial: fsl_lpuart: Use dev_info() instead of printk(),
Fabio Estevam
[PATCH 1/2] serial: fsl_lpuart: Use dev_info() instead of printk(),
Fabio Estevam
[PATCH 1/2 v4] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH AUTOSEL 4.4 52/56] dmaengine: idma64: Use actual device for DMA transfers,
Sasha Levin
[PATCH] tty/serial: digicolor: Fix digicolor-usart already registered warning,
Kefeng Wang
[PATCH 0/6] Convert sa1100 serial to use mctrl gpios,
Russell King - ARM Linux admin
[PATCH 2/6] ARM: sa1100/assabet: convert serial to gpiod APIs,
Russell King
[PATCH 3/6] ARM: sa1100/h3xxx: convert serial to gpiod APIs,
Russell King
[PATCH 4/6] ARM: sa1100/badge4: remove commented out modem control initialisers,
Russell King
[PATCH 5/6] ARM: sa1100/hackkit: remove empty serial mctrl functions,
Russell King
[PATCH 6/6] ARM: sa1100/neponset: convert serial to use gpiod APIs,
Russell King
[GIT PULL] TTY/Serial fixes for 5.2-rc3,
Greg KH
[PATCH 0/8] Serial: imx: various fixes,
Sergey Organov
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Site Home]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Linux Kernel for ARM]
