On Tue, Jun 25, 2019 at 04:14:35PM +0530, sudheer.v wrote: > From: sudheer veliseti <sudheer.open@xxxxxxxxx> > > defconfig changes to add DMA based UART in AST2500 > Maintainers File updated. > Signed-off-by: sudheer veliseti <sudheer.open@xxxxxxxxx> Blank line needed before signed-off-by. > --- > > Changes in v3: > - Added changes logs > > MAINTAINERS | 13 +++++++++++++ > arch/arm/configs/aspeed_g5_defconfig | 1 + > 2 files changed, 14 insertions(+) > > diff --git a/MAINTAINERS b/MAINTAINERS > index 997e27ab492f..c9a9790b97f6 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -1347,6 +1347,19 @@ F: drivers/crypto/axis > F: drivers/pinctrl/pinctrl-artpec* > F: Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt > > +ARM/ASPEED DMA UART DRIVER > +M: sudheer v <sudheer.open@xxxxxxxxx> > +M: ShivahShankar <shivahshankar.shankarnarayanrao@xxxxxxxxxxxxxx> > +R: Joel Stanley <joel@xxxxxxxxx> > +R: Andrew Jeffery <andrew@xxxxxxxx> > +R: Vinod Koul <vkoul@xxxxxxxxxx> > +L: dmaengine@xxxxxxxxxxxxxxx > +L: openbmc@xxxxxxxxxxxxxxxx > +L: linux-aspeed@xxxxxxxxxxxxxxxx > +S: Maintained > +F: drivers/tty/serial/8250/8250_aspeed_uart_dma.c > +F: Documentation/devicetree/bindings/serial/ast-sdma-uart.txt > + > ARM/ASPEED I2C DRIVER > M: Brendan Higgins <brendanhiggins@xxxxxxxxxx> > R: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> > diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig > index 1849cbc161b4..25bf26630939 100644 > --- a/arch/arm/configs/aspeed_g5_defconfig > +++ b/arch/arm/configs/aspeed_g5_defconfig > @@ -144,6 +144,7 @@ CONFIG_SERIAL_8250=y > CONFIG_SERIAL_8250_CONSOLE=y > CONFIG_SERIAL_8250_NR_UARTS=6 > CONFIG_SERIAL_8250_RUNTIME_UARTS=6 > +CONFIG_AST_SERIAL_DMA_UART=y This shows that the config option should be: CONFIG_SERIAL_AST_DMA_UART right? thanks, greg k-h
