Re: [PATCH v2 5/7] serial: imx: set_termios(): do not enable autoRTS if RTS is unset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> writes:

> On Wed, Jun 26, 2019 at 05:11:31PM +0300, Sergey Organov wrote:
>> set_termios() shouldn't set UCR2_CTSC bit if UCR2_CTS (=TIOCM_RTS) is
>> cleared. Added corresponding check in imx_uart_rts_auto() to fix this.
>> 
>> Reviewed-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
>> Tested-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
>> Signed-off-by: Sergey Organov <sorganov@xxxxxxxxx>
>> ---
>>  drivers/tty/serial/imx.c | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>> 
>> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
>> index e0f5365..4867f80 100644
>> --- a/drivers/tty/serial/imx.c
>> +++ b/drivers/tty/serial/imx.c
>> @@ -405,7 +405,8 @@ static void imx_uart_rts_inactive(struct imx_port *sport, u32 *ucr2)
>>  /* called with port.lock taken and irqs caller dependent */
>>  static void imx_uart_rts_auto(struct imx_port *sport, u32 *ucr2)
>>  {
>> -	*ucr2 |= UCR2_CTSC;
>> +	if (*ucr2 & UCR2_CTS)
>> +		*ucr2 |= UCR2_CTSC;
>>  }
>
> I wonder if this patch is only correct in the presence of the previous
> patch. With the code currently in mainline imx_uart_rts_auto() is only
> called with UCR2_CTS unset.

Yes, exactly.

Thanks!

-- Sergey



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux