Linux Serial
[Prev Page][Next Page]
[PATCH V33 19/30] Lock down TIOCSSERIAL,
Matthew Garrett
[PATCH 1/2 v9] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH v2] dt-bindings: serial: add documentation for Rx in-band wakeup support,
Claire Chang
[PATCH] Revert "serial: 8250: Don't service RX FIFO if interrupts are disabled",
Oliver Barta
[tty:tty-testing 42/52] drivers/tty/serial/8250/8250_pci.c:1330:1: sparse: sparse: symbol 'pericom_do_set_divisor' was not declared. Should it be static?,
kbuild test robot
[PATCH 0/5] STM32 usart FIFO handling,
Erwan Le Ray
[PATCH 1/3 v8] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH 1/3 v7] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH v1] serial: 8250: factor out serial8250_{set,clear}_THRI() helpers,
Andy Shevchenko
[PATCH] tty: serial_core: recover uport->cons->cflag on uart_close,
kpark3469
[PATCH v1] tty: serial: max310x: Add optional reset gpio,
Mylène Josserand
[PATCH] serial: imx: fix RTS/CTS setting,
Sascha Hauer
[PATCH] serial: sh-sci: fix uninitialized variable warning,
Charles
[PATCH v3 0/7] Use MFD framework for SGI IOC3 drivers,
Thomas Bogendoerfer
[PATCH 1/3 v6] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH v3 00/10] STM32 usart power improvements,
Erwan Le Ray
- [PATCH v3 10/10] ARM: dts: stm32: add wakeup capability on each usart/uart on stm32mp157c,
Erwan Le Ray
- [PATCH v3 09/10] ARM: dts: stm32: Update UART4 pin states on stm32mp157a-dk1,
Erwan Le Ray
- [PATCH v3 08/10] ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1,
Erwan Le Ray
- [PATCH v3 04/10] serial: stm32: add pm_runtime support,
Erwan Le Ray
- [PATCH v3 07/10] ARM: dts: stm32: update uart4 pin configurations for low power,
Erwan Le Ray
- [PATCH v3 03/10] serial: stm32: select pinctrl state in each suspend/resume function,
Erwan Le Ray
- [PATCH v3 06/10] serial: stm32: add support for no_console_suspend,
Erwan Le Ray
- [PATCH v3 05/10] serial: stm32: Use __maybe_unused instead of #if CONFIG_PM_SLEEP,
Erwan Le Ray
- [PATCH v3 01/10] dt-bindings: serial: stm32: add wakeup option,
Erwan Le Ray
- [PATCH v3 02/10] dt-bindings: serial: add optional pinctrl states,
Erwan Le Ray
[tty:tty-next 27/39] drivers/tty/serial/stm32-usart.c:1310:2: error: implicit declaration of function 'pinctrl_pm_select_default_state'; did you mean 'irq_set_default_host'?,
kbuild test robot
[PATCH v2 0/6] serial: uartps:,
Michal Simek
RFC: can we get rid of ->request_port() boilerplate ?,
Enrico Weigelt, metux IT consult
[PATCH] serial: fsl_lpuart: Remove unneeded OOM error message,
Fabio Estevam
[PATCH v2 00/10] STM32 usart power improvements,
Erwan Le Ray
- [PATCH v2 03/10] serial: stm32: select pinctrl state in each suspend/resume function,
Erwan Le Ray
- [PATCH v2 04/10] serial: stm32: add pm_runtime support,
Erwan Le Ray
- [PATCH v2 08/10] ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1,
Erwan Le Ray
- [PATCH v2 07/10] ARM: dts: stm32: update uart4 pin configurations for low power,
Erwan Le Ray
- [PATCH v2 09/10] ARM: dts: stm32: Update UART4 pin states on stm32mp157a-dk1,
Erwan Le Ray
- [PATCH v2 10/10] ARM: dts: stm32: add wakeup capability on each usart/uart on stm32mp157c,
Erwan Le Ray
- [PATCH v2 06/10] serial: stm32: add support for no_console_suspend,
Erwan Le Ray
- [PATCH v2 05/10] serial: stm32: Use __maybe_unused instead of #if CONFIG_PM_SLEEP,
Erwan Le Ray
- [PATCH v2 01/10] dt-bindings: serial: stm32: add wakeup option,
Erwan Le Ray
- [PATCH v2 02/10] dt-bindings: serial: add optional pinctrl states,
Erwan Le Ray
[PATCH] dt-bindings: serial: add documentation for Rx in-band wakeup support,
Claire Chang
[PATCH v4 0/1] Add support for higher baud rates to Pericom,
jay . dolan
[PATCH 1/2 v5] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH v3] tty: serial: msm_serial: avoid system lockup condition,
Jorge Ramirez-Ortiz
[PATCH 1/2] serial: xilinx_uartps: Fix warnings in the driver,
Michal Simek
[PATCH v2] tty: serial: msm_serial: avoid system lockup condition,
Jorge Ramirez-Ortiz
[PATCH] tty: serial: msm_serial: avoid system lockup condition,
Jorge Ramirez-Ortiz
serial: 8250: Potential loss of transmission error information in serial8250_handle_irq,
Oliver Barta
[PATCH v3] serial: stm32: fix a recursive locking in stm32_config_rs485,
Borut Seljak
[PATCH RFC] serial: imx: fix locking in set_termios(),
Sergey Organov
[PATCH] tty: serial: 8250-of: Do not warn on deferred probe,
Thierry Reding
[patch 0/5] *** Cover Letter: patch submission for AST2500 UART driver ***,
sudheer.v
[PATCH] serial: stm32: fix a recursive locking in stm32_config_rs485,
Borut Seljak
[PATCH v2] serial: stm32: fix a recursive locking in stm32_config_rs485,
Borut Seljak
[PATCH 00/10] STM32 usart power improvements,
Erwan Le Ray
- [PATCH 01/10] dt-bindings: serial: stm32: add wakeup option,
Erwan Le Ray
- [PATCH 02/10] dt-bindings: serial: add optional pinctrl states,
Erwan Le Ray
- [PATCH 04/10] serial: stm32: add pm_runtime support,
Erwan Le Ray
- [PATCH 03/10] serial: stm32: select pinctrl state in each suspend/resume function,
Erwan Le Ray
- [PATCH 05/10] serial: stm32: Use __maybe_unused instead of #if CONFIG_PM_SLEEP,
Erwan Le Ray
- [PATCH 08/10] ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1,
Erwan Le Ray
- [PATCH 07/10] ARM: dts: stm32: update uart4 pin configurations for low power,
Erwan Le Ray
- [PATCH 06/10] serial: stm32: add support for no_console_suspend,
Erwan Le Ray
- [PATCH 10/10] ARM: dts: stm32: add wakeup capability on each usart/uart on stm32mp157c,
Erwan Le Ray
- [PATCH 09/10] ARM: dts: stm32: Update UART4 pin states on stm32mp157a-dk1,
Erwan Le Ray
- Re: [PATCH 00/10] STM32 usart power improvements,
Alexandre Torgue
[PATCH v2 1/2] serial: fsl_lpuart: Use dev_info() instead of printk(),
Fabio Estevam
[PATCH 1/2] serial: fsl_lpuart: Use dev_info() instead of printk(),
Fabio Estevam
[PATCH 1/2 v4] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH AUTOSEL 4.4 52/56] dmaengine: idma64: Use actual device for DMA transfers,
Sasha Levin
[PATCH] tty/serial: digicolor: Fix digicolor-usart already registered warning,
Kefeng Wang
[PATCH 0/6] Convert sa1100 serial to use mctrl gpios,
Russell King - ARM Linux admin
[PATCH 2/6] ARM: sa1100/assabet: convert serial to gpiod APIs,
Russell King
[PATCH 3/6] ARM: sa1100/h3xxx: convert serial to gpiod APIs,
Russell King
[PATCH 4/6] ARM: sa1100/badge4: remove commented out modem control initialisers,
Russell King
[PATCH 5/6] ARM: sa1100/hackkit: remove empty serial mctrl functions,
Russell King
[PATCH 6/6] ARM: sa1100/neponset: convert serial to use gpiod APIs,
Russell King
[GIT PULL] TTY/Serial fixes for 5.2-rc3,
Greg KH
[PATCH 0/8] Serial: imx: various fixes,
Sergey Organov
[PATCH -next] serial: stm32: Make stm32_get_databits static,
YueHaibing
[PATCH v3 0/1] Add support for higher baud rates to Pericom,
jay . dolan
[PATCH 1/2 v3] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH v11 0/6] Add basic node support for Mediatek MT8183 SoC,
Erin Lo
[PATCH v3 0/2] support 8250-mtk uart in-band wake up,
Claire Chang
[PATCH v2 0/2] support 8250-mtk uart in-band wake up,
Claire Chang
[PATCH] serial: Fix an invalid comparing statement,
Sugaya Taichi
[PATCH 1/1] dt-bindings: stm32: serial: Add optional reset,
Erwan Le Ray
[PATCH 1/2 v2] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH v4] serial: 8250: Fix TX interrupt handling condition,
Rautkoski Kimmo EXT
[PATCHv3 1/2] serial: uartps: Move the spinlock after the read of the tx empty,
shubhrajyoti . datta
[PATCH v3] serial: 8250: Fix TX interrupt handling condition,
Rautkoski Kimmo EXT
[PATCH v13 0/2] add uart DMA function,
Long Cheng
[PATCH 0/6] arm64: Initial support Texas Instrument's J721E Platform,
Nishanth Menon
[PATCH] tty: serial: cpm_uart - fix init when SMC is relocated,
Christophe Leroy
[PATCH 1/2] serial: mctrl_gpio: Check if GPIO property exisits before requesting it,
Stefan Roese
[PATCH 0/7] usart various fixes for STM32,
Erwan Le Ray
[PATCH] tracing: fix typos in code and comments,
houweitao
[PATCHv2 1/2] serial: uartps: Move the spinlock after the read of the tx empty,
shubhrajyoti . datta
[PATCHv2 2/2] serial: uartps: Add a timeout to the tx empty wait,
shubhrajyoti . datta
[PATCH 2/2] serial: uartps: Add a timeout to the tx empty wait,
Shubhrajyoti Datta
[PATCH 1/2] serial: uartps: Move the spinlock after the read of the tx empty,
Shubhrajyoti Datta
[PATCH 0/2] support 8250-mtk uart in-band wake up,
Claire Chang
[PATCH v2] tty: serial: msm_serial: Fix XON/XOFF,
Jorge Ramirez-Ortiz
[PATCH] tty: serial: msm_serial: Fix XON/XOFF,
Jorge Ramirez-Ortiz
[PATCH] serial: imx: remove log spamming error message,
Sascha Hauer
[PATCH] serial-uartlite: Fix null-ptr-deref in ulite_exit,
YueHaibing
[PATCH v3] serial: sh-sci: disable DMA for uart_console,
George G. Davis
[PATCH 0/7] tty: max310x: Simplify the code and fix a few bugs,
Serge Semin
[PATCH] tty: serial: uartlite: avoid null pointer dereference during rmmod,
Kefeng Wang
[PATCH v2] serial: sh-sci: disable DMA for uart_console,
George G. Davis
[PATCH] Fix external crystal register setup in max310x.,
Joe Burmeister
max310x driver bugfix,
Joe Burmeister
Re: [PATCH] serial: sh-sci: disable DMA for uart_console,
Eugeniu Rosca
[PATCH] tty: amba-pl011: allow shared interrupt,
Florian Fainelli
[PATCH] tty: serial_core: Fix the incorrect configuration of baud rate and data length at the console serial port resume,
Lanqing Liu
[PATCH] tty: serial_core: Set port active bit in uart_port_activate,
Serge Semin
[GIT PULL] TTY/Serial patches for 5.2-rc1,
Greg KH
[PATCH v2] serial: 8250: Fix TX interrupt handling condition,
Rautkoski Kimmo EXT
re: serial: Add Milbeaut serial control,
Colin Ian King
[PATCH v2] serial: 8250_of: Use of_device_get_match_data(),
Andy Shevchenko
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Site Home]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Linux Kernel for ARM]
